TTL Devices with DIN Symbols CadSoft and the author do not warrant that this library is free from error or will meet your specific requirements. <author>Created by Holger Bettenbühl, hol.bet.@rhein-main.net</author> Dual In Line Package >NAME >VALUE Dual In Line Package >NAME >VALUE Dual In Line Package Dual In Line Package >NAME >NAME >VALUE >NAME S J C K >NAME >VALUE 2D G1 1C2 C1 1 D >NAME >VALUE EN >NAME >VALUE & Dual J-K negative edge triggered FLIP FLOP, preset Octal D type FLIP FLOP, enable 8-bit D type FLIP FLOP bus driver Quad 2-input NAND gate WIMA Capacitors <author>Created by librarian@cadsoft.de</author> MKS4, 13.4 x 4 mm, grid 10.16 mm >NAME >VALUE MKS4, 13.4 x 5 mm, grid 10.16 mm >NAME >VALUE MKS4, 13.4 x 6 mm, grid 10.16 mm >NAME >VALUE MKS4, 18 x 5 mm, grid 15 mm >NAME >VALUE MKS4, 18 x 6 mm, grid 15 mm >NAME >VALUE MKS4, 18 x 7 mm, grid 15 mm >NAME >VALUE MKS4, 18 x 8 mm, grid 15 mm >NAME >VALUE MKS4, 18 x 9 mm, grid 15 mm >NAME >VALUE MKS2, 5 x 2.5 mm, grid 2.54 mm >NAME >VALUE MKS2, 5 x 4 mm, grid 2.54 mm >NAME >VALUE MKS2, 5 x 5 mm, grid 2.54 mm >NAME >VALUE MKS2, 5 x 6 mm, grid 2.54 mm >NAME >VALUE MKS4, 27 x 10 mm, grid 22.5 mm >NAME >VALUE MKS4, 27 x 11 mm, grid 22.5 mm >NAME >VALUE MKS4, 27 x 6 mm, grid 22.5 mm >NAME >VALUE MKS4, 27 x 7 mm, grid 22.5 mm >NAME >VALUE MKS4, 27 x 8 mm, grid 22.5 mm >NAME >VALUE MKS4, 31.6 x 11 mm, grid 27.5 mm >NAME >VALUE MKS4, 31.6 x 13 mm, grid 27.5 mm >NAME >VALUE MKS4, 31.6 x 15 mm, grid 27.5 mm >NAME >VALUE MKS4, 31.6 x 17 mm, grid 27.5 mm >NAME >VALUE MKS4, 31.6 x 20 mm, grid 27.5 mm >NAME >VALUE MKS4, 31.6 x 9 mm, grid 27.5 mm >NAME >VALUE MKP4, 42 x 15 mm, grid 37.5 mm >NAME >VALUE MKP4, 42 x 19 mm, grid 37.5 mm >NAME >VALUE MKP4, 42 x 20 mm, grid 37.5 mm >NAME >VALUE MKS2, 7.5 x 2.5 mm, grid 5.08 mm >NAME >VALUE MKS2, 7.5 x 3 mm, grid 5.08 mm >NAME >VALUE MKS2, 7.5 x 4 mm, grid 5.08 mm >NAME >VALUE MKS2, 7.5 x 4.5 mm, grid 5.08 mm >NAME >VALUE MKS2, 7.5 x 5 mm, grid 5.08 mm >NAME >VALUE MKS2, 7.5 x 5.5 mm, grid 5.08 mm >NAME >VALUE MKS2, 7.5 x 7.2 mm, grid 5.08 mm >NAME >VALUE MKS3, 10 x 3 mm, grid 7.62 mm >NAME >VALUE MKS3, 10 x 4 mm, grid 7.62 mm >NAME >VALUE MKS3, 10 x 5 mm, grid 7.62 mm >NAME >VALUE MKS3, 10 x 6 mm, grid 7.62 mm >NAME >VALUE MKS2, 5 x 3 mm, grid 2.54 mm >NAME >VALUE MKS4, 13.4 x 4 mm, grid 10.16 mm MKS4, 13.4 x 5 mm, grid 10.16 mm MKS4, 13.4 x 6 mm, grid 10.16 mm MKS4, 18 x 5 mm, grid 15 mm MKS4, 18 x 6 mm, grid 15 mm MKS4, 18 x 7 mm, grid 15 mm MKS4, 18 x 8 mm, grid 15 mm MKS4, 18 x 9 mm, grid 15 mm MKS2, 5 x 2.5 mm, grid 2.54 mm MKS2, 5 x 4 mm, grid 2.54 mm MKS2, 5 x 5 mm, grid 2.54 mm MKS2, 5 x 6 mm, grid 2.54 mm MKS4, 27 x 10 mm, grid 22.5 mm MKS4, 27 x 11 mm, grid 22.5 mm MKS4, 27 x 6 mm, grid 22.5 mm MKS4, 27 x 7 mm, grid 22.5 mm MKS4, 27 x 8 mm, grid 22.5 mm MKS4, 31.6 x 11 mm, grid 27.5 mm MKS4, 31.6 x 13 mm, grid 27.5 mm MKS4, 31.6 x 15 mm, grid 27.5 mm MKS4, 31.6 x 17 mm, grid 27.5 mm MKS4, 31.6 x 20 mm, grid 27.5 mm MKS4, 31.6 x 9 mm, grid 27.5 mm MKP4, 42 x 15 mm, grid 37.5 mm MKP4, 42 x 19 mm, grid 37.5 mm MKP4, 42 x 20 mm, grid 37.5 mm MKS2, 7.5 x 2.5 mm, grid 5.08 mm MKS2, 7.5 x 3 mm, grid 5.08 mm MKS2, 7.5 x 4 mm, grid 5.08 mm MKS2, 7.5 x 4.5 mm, grid 5.08 mm MKS2, 7.5 x 5 mm, grid 5.08 mm MKS2, 7.5 x 5.5 mm, grid 5.08 mm MKS2, 7.5 x 7.2 mm, grid 5.08 mm MKS3, 10 x 3 mm, grid 7.62 mm MKS3, 10 x 4 mm, grid 7.62 mm MKS3, 10 x 5 mm, grid 7.62 mm MKS3, 10 x 6 mm, grid 7.62 mm MKS2, 5 x 3 mm, grid 2.54 mm >NAME >VALUE CAPACITOR naming: grid - package width Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER PIN HEADER >NAME >VALUE PIN HEADER Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL IDT Memories Integrated Device Technology, Inc. http://www.idt.com <author>Created by librarian@cadsoft.de</author> Dual In Line Package >NAME >VALUE Dual In Line Package 0.6 inch >NAME >VALUE Dual In Line Package Small >NAME >VALUE >NAME >VALUE >NAME GND VCC MEMORY Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.