integrate zero-riscy

software/sys_controller/crt0.boot.S

@@ -0,0 +1,103 @@
+// Copyright 2017 ETH Zurich and University of Bologna.
+// Copyright and related rights are licensed under the Solderpad Hardware
+// License, Version 0.51 (the “License”); you may not use this file except in
+// compliance with the License.  You may obtain a copy of the License at
+// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
+// or agreed to in writing, software, hardware and materials distributed under
+// this License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR
+// CONDITIONS OF ANY KIND, either express or implied. See the License for the
+// specific language governing permissions and limitations under the License.
+
+#include "pulpino.h"
+
+#define EXCEPTION_STACK_SIZE 72
+
+
+/* ========================================================= [ entry ] === */
+  .section .text
+
+default_exc_handler:
+  jal x0, default_exc_handler
+
+reset_handler:
+  /* set all registers to zero */
+  mv  x1, x0
+  mv  x2, x1
+  mv  x3, x1
+  mv  x4, x1
+  mv  x5, x1
+  mv  x6, x1
+  mv  x7, x1
+  mv  x8, x1
+  mv  x9, x1
+  mv x10, x1
+  mv x11, x1
+  mv x12, x1
+  mv x13, x1
+  mv x14, x1
+  mv x15, x1
+  mv x16, x1
+  mv x17, x1
+  mv x18, x1
+  mv x19, x1
+  mv x20, x1
+  mv x21, x1
+  mv x22, x1
+  mv x23, x1
+  mv x24, x1
+  mv x25, x1
+  mv x26, x1
+  mv x27, x1
+  mv x28, x1
+  mv x29, x1
+  mv x30, x1
+  mv x31, x1
+
+  /* stack initilization */
+  la   x2, _stack_start
+
+_start:
+  .global _start
+
+  /* clear BSS */
+  la x26, _bss_start
+  la x27, _bss_end
+
+  bge x26, x27, zero_loop_end
+
+zero_loop:
+  sw x0, 0(x26)
+  addi x26, x26, 4
+  ble x26, x27, zero_loop
+zero_loop_end:
+
+
+main_entry:
+  /* jump to alt_main program entry point */
+  jal alt_main
+
+/* =================================================== [ exceptions ] === */
+/* This section has to be down here, since we have to disable rvc for it  */
+
+  .section .vectors, "ax"
+  .option norvc;
+
+  // external interrupts are handled by the same callback
+  // until compiler supports IRQ routines
+  .org 0x00
+  .rept 31
+  nop
+  .endr
+  jal x0, default_exc_handler
+
+  // reset vector
+  .org 0x80
+  jal x0, reset_handler
+
+  // illegal instruction exception
+  .org 0x84
+  jal x0, default_exc_handler
+
+  // ecall handler
+  .org 0x88
+  jal x0, default_exc_handler