optimize clock network

* replace all clock muxes with a single cycloneive_clkctrl to minimize skew
* use a single dynamically configured PLL to comply with cycloneive_clkctrl
This commit is contained in:
marqs committed 2019-10-06 23:54:32 +03:00
1 parent d1fd30019f
commit 9d496383c3
28 files changed
+8520 -7310

No files matched your search

-6
View File
@@ -1,6 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "LPM_MUX"
set_global_assignment -name IP_TOOL_VERSION "17.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone IV E}"
set_global_assignment -name VERILOG_FILE [file join $::quartus(qip_path) "mux5.v"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "mux5_inst.v"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "mux5_bb.v"]
-117
View File
@@ -1,117 +0,0 @@
// megafunction wizard: %LPM_MUX%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: LPM_MUX
// ============================================================
// File Name: mux5.v
// Megafunction Name(s):
// LPM_MUX
//
// Simulation Library Files(s):
// lpm
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 17.1.0 Build 590 10/25/2017 SJ Lite Edition
// ************************************************************
//Copyright (C) 2017 Intel Corporation. All rights reserved.
//Your use of Intel Corporation's design tools, logic functions
//and other software and tools, and its AMPP partner logic
//functions, and any output files from any of the foregoing
//(including device programming or simulation files), and any
//associated documentation or information are expressly subject
//to the terms and conditions of the Intel Program License
//Subscription Agreement, the Intel Quartus Prime License Agreement,
//the Intel FPGA IP License Agreement, or other applicable license
//agreement, including, without limitation, that your use is for
//the sole purpose of programming logic devices manufactured by
//Intel and sold by Intel or its authorized distributors. Please
//refer to the applicable agreement for further details.
// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module mux5 (
data0,
data1,
data2,
data3,
data4,
sel,
result);
input data0;
input data1;
input data2;
input data3;
input data4;
input [2:0] sel;
output result;
wire [0:0] sub_wire0;
wire sub_wire7 = data4;
wire sub_wire6 = data3;
wire sub_wire5 = data2;
wire sub_wire4 = data1;
wire [0:0] sub_wire1 = sub_wire0[0:0];
wire result = sub_wire1;
wire sub_wire2 = data0;
wire [4:0] sub_wire3 = {sub_wire7, sub_wire6, sub_wire5, sub_wire4, sub_wire2};
lpm_mux LPM_MUX_component (
.data (sub_wire3),
.sel (sel),
.result (sub_wire0)
// synopsys translate_off
,
.aclr (),
.clken (),
.clock ()
// synopsys translate_on
);
defparam
LPM_MUX_component.lpm_size = 5,
LPM_MUX_component.lpm_type = "LPM_MUX",
LPM_MUX_component.lpm_width = 1,
LPM_MUX_component.lpm_widths = 3;
endmodule
// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
// Retrieval info: PRIVATE: new_diagram STRING "1"
// Retrieval info: LIBRARY: lpm lpm.lpm_components.all
// Retrieval info: CONSTANT: LPM_SIZE NUMERIC "5"
// Retrieval info: CONSTANT: LPM_TYPE STRING "LPM_MUX"
// Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "1"
// Retrieval info: CONSTANT: LPM_WIDTHS NUMERIC "3"
// Retrieval info: USED_PORT: data0 0 0 0 0 INPUT NODEFVAL "data0"
// Retrieval info: USED_PORT: data1 0 0 0 0 INPUT NODEFVAL "data1"
// Retrieval info: USED_PORT: data2 0 0 0 0 INPUT NODEFVAL "data2"
// Retrieval info: USED_PORT: data3 0 0 0 0 INPUT NODEFVAL "data3"
// Retrieval info: USED_PORT: data4 0 0 0 0 INPUT NODEFVAL "data4"
// Retrieval info: USED_PORT: result 0 0 0 0 OUTPUT NODEFVAL "result"
// Retrieval info: USED_PORT: sel 0 0 3 0 INPUT NODEFVAL "sel[2..0]"
// Retrieval info: CONNECT: @data 0 0 1 0 data0 0 0 0 0
// Retrieval info: CONNECT: @data 0 0 1 1 data1 0 0 0 0
// Retrieval info: CONNECT: @data 0 0 1 2 data2 0 0 0 0
// Retrieval info: CONNECT: @data 0 0 1 3 data3 0 0 0 0
// Retrieval info: CONNECT: @data 0 0 1 4 data4 0 0 0 0
// Retrieval info: CONNECT: @sel 0 0 3 0 sel 0 0 3 0
// Retrieval info: CONNECT: result 0 0 0 0 @result 0 0 1 0
// Retrieval info: GEN_FILE: TYPE_NORMAL mux5.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL mux5.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL mux5.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL mux5.bsf FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL mux5_inst.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL mux5_bb.v TRUE
// Retrieval info: LIB_FILE: lpm
+61 -66
View File
@@ -18,7 +18,6 @@
//
//`define DEBUG
`define VIDEOGEN
`define PO_RESET_WIDTH 27 //1us
module ossc (
@@ -34,13 +33,13 @@ module ossc (
input VSYNC_in,
input HSYNC_in,
input PCLK_in,
output [7:0] HDMI_TX_RD,
output [7:0] HDMI_TX_GD,
output [7:0] HDMI_TX_BD,
output HDMI_TX_DE,
output HDMI_TX_HS,
output HDMI_TX_VS,
output HDMI_TX_PCLK,
output reg [7:0] HDMI_TX_RD,
output reg [7:0] HDMI_TX_GD,
output reg [7:0] HDMI_TX_BD,
output reg HDMI_TX_DE,
output reg HDMI_TX_HS,
output reg HDMI_TX_VS,
input HDMI_TX_INT_N,
input HDMI_TX_MODE,
output hw_reset_n,
@@ -56,9 +55,7 @@ module ossc (
wire [15:0] sys_ctrl;
wire h_unstable;
wire [1:0] pclk_lock;
wire [1:0] pll_lock_lost;
wire h_unstable, pll_lock_lost;
wire [31:0] h_config, h_config2, v_config, misc_config, sl_config, sl_config2;
wire [10:0] vmax, vmax_tvp;
wire [1:0] fpga_vsyncgen;
@@ -68,17 +65,16 @@ wire [19:0] pcnt_frame;
wire [15:0] ir_code;
wire [7:0] ir_code_cnt;
wire [7:0] R_out, G_out, B_out;
wire HSYNC_out;
wire VSYNC_out;
wire [7:0] R_out_sc, G_out_sc, B_out_sc;
wire HSYNC_out_sc;
wire VSYNC_out_sc;
wire PCLK_out;
wire DE_out;
wire DE_out_sc;
wire [7:0] R_out_videogen, G_out_videogen, B_out_videogen;
wire HSYNC_out_videogen;
wire VSYNC_out_videogen;
wire PCLK_out_videogen;
wire DE_out_videogen;
wire [7:0] R_out_vg, G_out_vg, B_out_vg;
wire HSYNC_out_vg;
wire VSYNC_out_vg;
wire DE_out_vg;
reg [7:0] po_reset_ctr = 0;
@@ -110,6 +106,8 @@ wire osd_enable = osd_enable_pre & ~lt_active;
wire [10:0] xpos, xpos_sc, xpos_vg;
wire [10:0] ypos, ypos_sc, ypos_vg;
wire pll_areset, pll_scanclk, pll_scanclkena, pll_configupdate, pll_scandata, pll_scandone;
// Latch inputs from TVP7002 (synchronized to PCLK_in)
always @(posedge PCLK_in or negedge hw_reset_n)
@@ -171,7 +169,7 @@ assign hw_reset_n = sys_ctrl[0]; //HDMI_TX_RST_N in v1.2 PCB
assign LED_R = HSYNC_in_L;
assign LED_G = VSYNC_in_L;
`else
assign LED_R = videogen_sel ? 1'b0 : ((pll_lock_lost != 2'h0)|h_unstable);
assign LED_R = (pll_lock_lost|h_unstable);
assign LED_G = (ir_code == 0);
`endif
@@ -182,31 +180,19 @@ wire lcd_bl_on = sys_ctrl[4]; //hw_reset_n in v1.2 PCB
wire [1:0] lcd_bl_time = sys_ctrl[3:2];
assign LCD_BL = lcd_bl_on ? (~lcd_bl_timeout | lt_active) : 1'b0;
`ifdef VIDEOGEN
wire videogen_sel;
assign videogen_sel = ~sys_ctrl[1];
assign HDMI_TX_RD = videogen_sel ? R_out_videogen : R_out;
assign HDMI_TX_GD = videogen_sel ? G_out_videogen : G_out;
assign HDMI_TX_BD = videogen_sel ? B_out_videogen : B_out;
assign HDMI_TX_HS = videogen_sel ? HSYNC_out_videogen : HSYNC_out;
assign HDMI_TX_VS = videogen_sel ? VSYNC_out_videogen : VSYNC_out;
assign HDMI_TX_PCLK = videogen_sel ? PCLK_out_videogen : PCLK_out;
assign HDMI_TX_DE = videogen_sel ? DE_out_videogen : DE_out;
assign xpos = videogen_sel ? xpos_vg : xpos_sc;
assign ypos = videogen_sel ? ypos_vg : ypos_sc;
`else
wire videogen_sel;
assign videogen_sel = 1'b0;
assign HDMI_TX_RD = R_out;
assign HDMI_TX_GD = G_out;
assign HDMI_TX_BD = B_out;
assign HDMI_TX_HS = HSYNC_out;
assign HDMI_TX_VS = VSYNC_out;
wire enable_sc = sys_ctrl[1];
assign xpos = enable_sc ? xpos_sc : xpos_vg;
assign ypos = enable_sc ? ypos_sc : ypos_vg;
assign HDMI_TX_PCLK = PCLK_out;
assign HDMI_TX_DE = DE_out;
assign xpos = xpos_sc;
assign ypos = ypos_sc;
`endif
always @(posedge PCLK_out) begin
HDMI_TX_RD <= enable_sc ? R_out_sc : R_out_vg;
HDMI_TX_GD <= enable_sc ? G_out_sc : G_out_vg;
HDMI_TX_BD <= enable_sc ? B_out_sc : B_out_vg;
HDMI_TX_HS <= enable_sc ? HSYNC_out_sc : HSYNC_out_vg;
HDMI_TX_VS <= enable_sc ? VSYNC_out_sc : VSYNC_out_vg;
HDMI_TX_DE <= enable_sc ? DE_out_sc : DE_out_vg;
end
// LCD backlight timeout counters
always @(posedge clk27)
@@ -260,17 +246,24 @@ sys sys_inst(
.sc_config_0_sc_if_misc_config_o (misc_config),
.sc_config_0_sc_if_sl_config_o (sl_config),
.sc_config_0_sc_if_sl_config2_o (sl_config2),
.osd_generator_0_osd_if_vclk (HDMI_TX_PCLK),
.osd_generator_0_osd_if_vclk (PCLK_out),
.osd_generator_0_osd_if_xpos (xpos),
.osd_generator_0_osd_if_ypos (ypos),
.osd_generator_0_osd_if_osd_enable (osd_enable_pre),
.osd_generator_0_osd_if_osd_color (osd_color)
.osd_generator_0_osd_if_osd_color (osd_color),
.pll_reconfig_0_pll_reconfig_if_areset (pll_areset),
.pll_reconfig_0_pll_reconfig_if_scanclk (pll_scanclk),
.pll_reconfig_0_pll_reconfig_if_scanclkena (pll_scanclkena),
.pll_reconfig_0_pll_reconfig_if_configupdate (pll_configupdate),
.pll_reconfig_0_pll_reconfig_if_scandata (pll_scandata),
.pll_reconfig_0_pll_reconfig_if_scandone (pll_scandone)
);
scanconverter scanconverter_inst (
.reset_n (hw_reset_n),
.PCLK_in (PCLK_in),
.clk27 (clk27),
.enable_sc (enable_sc),
.HSYNC_in (HSYNC_in_L),
.VSYNC_in (VSYNC_in_L),
.FID_in (FID_in_L),
@@ -283,16 +276,15 @@ scanconverter scanconverter_inst (
.misc_config (misc_config),
.sl_config (sl_config),
.sl_config2 (sl_config2),
.R_out (R_out),
.G_out (G_out),
.B_out (B_out),
.HSYNC_out (HSYNC_out),
.VSYNC_out (VSYNC_out),
.R_out (R_out_sc),
.G_out (G_out_sc),
.B_out (B_out_sc),
.PCLK_out (PCLK_out),
.DE_out (DE_out),
.HSYNC_out (HSYNC_out_sc),
.VSYNC_out (VSYNC_out_sc),
.DE_out (DE_out_sc),
.h_unstable (h_unstable),
.fpga_vsyncgen (fpga_vsyncgen),
.pclk_lock (pclk_lock),
.pll_lock_lost (pll_lock_lost),
.vmax (vmax),
.vmax_tvp (vmax_tvp),
@@ -304,7 +296,13 @@ scanconverter scanconverter_inst (
.osd_enable (osd_enable),
.osd_color (osd_color),
.xpos (xpos_sc),
.ypos (ypos_sc)
.ypos (ypos_sc),
.pll_areset (pll_areset),
.pll_scanclk (pll_scanclk),
.pll_scanclkena (pll_scanclkena),
.pll_configupdate (pll_configupdate),
.pll_scandata (pll_scandata),
.pll_scandone (pll_scandone)
);
ir_rcv ir0 (
@@ -318,7 +316,7 @@ ir_rcv ir0 (
lat_tester lt0 (
.clk27 (clk27),
.pclk (HDMI_TX_PCLK),
.pclk (PCLK_out),
.active (lt_active),
.armed (lt_armed),
.sensor (btn_LL[1]),
@@ -331,24 +329,21 @@ lat_tester lt0 (
.finished (lt_finished)
);
`ifdef VIDEOGEN
videogen vg0 (
.clk27 (clk27),
.reset_n (po_reset_n & videogen_sel),
.clk27 (PCLK_out),
.reset_n (po_reset_n & ~enable_sc),
.lt_active (lt_active),
.lt_mode (lt_mode_synced),
.osd_enable (osd_enable),
.osd_color (osd_color),
.R_out (R_out_videogen),
.G_out (G_out_videogen),
.B_out (B_out_videogen),
.HSYNC_out (HSYNC_out_videogen),
.VSYNC_out (VSYNC_out_videogen),
.PCLK_out (PCLK_out_videogen),
.ENABLE_out (DE_out_videogen),
.R_out (R_out_vg),
.G_out (G_out_vg),
.B_out (B_out_vg),
.HSYNC_out (HSYNC_out_vg),
.VSYNC_out (VSYNC_out_vg),
.DE_out (DE_out_vg),
.xpos (xpos_vg),
.ypos (ypos_vg)
);
`endif
endmodule
+8
View File
@@ -3,10 +3,18 @@
<pinplan intended_family="Cyclone IV E" variation_name="pll_2x" megafunction_name="ALTPLL" specifies="all_ports">
<global>
<pin name="areset" direction="input" scope="external" />
<pin name="clkswitch" direction="input" scope="external" />
<pin name="configupdate" direction="input" scope="external" />
<pin name="inclk0" direction="input" scope="external" source="clock" />
<pin name="inclk1" direction="input" scope="external" source="clock" />
<pin name="scanclk" direction="input" scope="external" source="clock" />
<pin name="scanclkena" direction="input" scope="external" />
<pin name="scandata" direction="input" scope="external" />
<pin name="c0" direction="output" scope="external" source="clock" />
<pin name="c1" direction="output" scope="external" source="clock" />
<pin name="locked" direction="output" scope="external" />
<pin name="scandataout" direction="output" scope="external" />
<pin name="scandone" direction="output" scope="external" />
</global>
</pinplan>
+1
View File
@@ -2,5 +2,6 @@ set_global_assignment -name IP_TOOL_NAME "ALTPLL"
set_global_assignment -name IP_TOOL_VERSION "17.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone IV E}"
set_global_assignment -name VERILOG_FILE [file join $::quartus(qip_path) "pll_2x.v"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_2x_inst.v"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_2x_bb.v"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_2x.ppf"]
+104 -49
View File
@@ -9,7 +9,7 @@
// altpll
//
// Simulation Library Files(s):
//
// altera_mf
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
@@ -38,46 +38,75 @@
// synopsys translate_on
module pll_2x (
areset,
clkswitch,
configupdate,
inclk0,
inclk1,
scanclk,
scanclkena,
scandata,
c0,
c1,
locked);
locked,
scandataout,
scandone);
input areset;
input clkswitch;
input configupdate;
input inclk0;
input inclk1;
input scanclk;
input scanclkena;
input scandata;
output c0;
output c1;
output locked;
output scandataout;
output scandone;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
tri0 areset;
tri0 clkswitch;
tri0 configupdate;
tri0 scanclkena;
tri0 scandata;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif
wire [4:0] sub_wire0;
wire sub_wire3;
wire [0:0] sub_wire6 = 1'h0;
wire sub_wire4;
wire sub_wire5;
wire sub_wire8 = inclk1;
wire [1:1] sub_wire2 = sub_wire0[1:1];
wire [0:0] sub_wire1 = sub_wire0[0:0];
wire c0 = sub_wire1;
wire c1 = sub_wire2;
wire locked = sub_wire3;
wire sub_wire4 = inclk0;
wire [1:0] sub_wire5 = {sub_wire6, sub_wire4};
wire scandataout = sub_wire4;
wire scandone = sub_wire5;
wire sub_wire6 = inclk0;
wire [1:0] sub_wire7 = {sub_wire8, sub_wire6};
altpll altpll_component (
.areset (areset),
.inclk (sub_wire5),
.clkswitch (clkswitch),
.configupdate (configupdate),
.inclk (sub_wire7),
.scanclk (scanclk),
.scanclkena (scanclkena),
.scandata (scandata),
.clk (sub_wire0),
.locked (sub_wire3),
.scandataout (sub_wire4),
.scandone (sub_wire5),
.activeclock (),
.clkbad (),
.clkena ({6{1'b1}}),
.clkloss (),
.clkswitch (1'b0),
.configupdate (1'b0),
.enable0 (),
.enable1 (),
.extclk (),
@@ -94,11 +123,6 @@ module pll_2x (
.phaseupdown (1'b1),
.pllena (1'b1),
.scanaclr (1'b0),
.scanclk (1'b0),
.scanclkena (1'b1),
.scandata (1'b0),
.scandataout (),
.scandone (),
.scanread (1'b0),
.scanwrite (1'b0),
.sclkout0 (),
@@ -109,29 +133,30 @@ module pll_2x (
altpll_component.bandwidth_type = "HIGH",
altpll_component.clk0_divide_by = 1,
altpll_component.clk0_duty_cycle = 50,
altpll_component.clk0_multiply_by = 2,
altpll_component.clk0_multiply_by = 1,
altpll_component.clk0_phase_shift = "0",
altpll_component.clk1_divide_by = 1,
altpll_component.clk1_duty_cycle = 50,
altpll_component.clk1_multiply_by = 5,
altpll_component.clk1_multiply_by = 1,
altpll_component.clk1_phase_shift = "0",
altpll_component.compensate_clock = "CLK0",
altpll_component.inclk0_input_frequency = 37037,
altpll_component.inclk1_input_frequency = 37037,
altpll_component.intended_device_family = "Cyclone IV E",
altpll_component.lpm_hint = "CBX_MODULE_PREFIX=pll_2x",
altpll_component.lpm_type = "altpll",
altpll_component.operation_mode = "SOURCE_SYNCHRONOUS",
altpll_component.operation_mode = "NORMAL",
altpll_component.pll_type = "AUTO",
altpll_component.port_activeclock = "PORT_UNUSED",
altpll_component.port_areset = "PORT_USED",
altpll_component.port_clkbad0 = "PORT_UNUSED",
altpll_component.port_clkbad1 = "PORT_UNUSED",
altpll_component.port_clkloss = "PORT_UNUSED",
altpll_component.port_clkswitch = "PORT_UNUSED",
altpll_component.port_configupdate = "PORT_UNUSED",
altpll_component.port_clkswitch = "PORT_USED",
altpll_component.port_configupdate = "PORT_USED",
altpll_component.port_fbin = "PORT_UNUSED",
altpll_component.port_inclk0 = "PORT_USED",
altpll_component.port_inclk1 = "PORT_UNUSED",
altpll_component.port_inclk1 = "PORT_USED",
altpll_component.port_locked = "PORT_USED",
altpll_component.port_pfdena = "PORT_UNUSED",
altpll_component.port_phasecounterselect = "PORT_UNUSED",
@@ -140,11 +165,11 @@ module pll_2x (
altpll_component.port_phaseupdown = "PORT_UNUSED",
altpll_component.port_pllena = "PORT_UNUSED",
altpll_component.port_scanaclr = "PORT_UNUSED",
altpll_component.port_scanclk = "PORT_UNUSED",
altpll_component.port_scanclkena = "PORT_UNUSED",
altpll_component.port_scandata = "PORT_UNUSED",
altpll_component.port_scandataout = "PORT_UNUSED",
altpll_component.port_scandone = "PORT_UNUSED",
altpll_component.port_scanclk = "PORT_USED",
altpll_component.port_scanclkena = "PORT_USED",
altpll_component.port_scandata = "PORT_USED",
altpll_component.port_scandataout = "PORT_USED",
altpll_component.port_scandone = "PORT_USED",
altpll_component.port_scanread = "PORT_UNUSED",
altpll_component.port_scanwrite = "PORT_UNUSED",
altpll_component.port_clk0 = "PORT_USED",
@@ -163,8 +188,16 @@ module pll_2x (
altpll_component.port_extclk1 = "PORT_UNUSED",
altpll_component.port_extclk2 = "PORT_UNUSED",
altpll_component.port_extclk3 = "PORT_UNUSED",
altpll_component.primary_clock = "inclk0",
altpll_component.self_reset_on_loss_lock = "OFF",
altpll_component.width_clock = 5;
altpll_component.switch_over_type = "MANUAL",
altpll_component.width_clock = 5,
`ifdef NO_PLI
altpll_component.scan_chain_mif_file = "pll_2x.rif"
`else
altpll_component.scan_chain_mif_file = "pll_2x.hex"
`endif
;
endmodule
@@ -184,16 +217,16 @@ endmodule
// Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
// Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
// Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "1"
// Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
// Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
// Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "7"
// Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "8"
// Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
// Retrieval info: PRIVATE: DIV_FACTOR1 NUMERIC "1"
// Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
// Retrieval info: PRIVATE: DUTY_CYCLE1 STRING "50.00000000"
// Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "54.000000"
// Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE1 STRING "135.000000"
// Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "27.000000"
// Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE1 STRING "27.000000"
// Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
// Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
// Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
@@ -203,7 +236,7 @@ endmodule
// Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
// Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "27.000"
// Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "27.000"
// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
@@ -218,9 +251,9 @@ endmodule
// Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
// Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
// Retrieval info: PRIVATE: MIRROR_CLK1 STRING "0"
// Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "2"
// Retrieval info: PRIVATE: MULT_FACTOR1 NUMERIC "5"
// Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "0"
// Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "1"
// Retrieval info: PRIVATE: MULT_FACTOR1 NUMERIC "1"
// Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
// Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000"
// Retrieval info: PRIVATE: OUTPUT_FREQ1 STRING "100.00000000"
// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
@@ -244,8 +277,8 @@ endmodule
// Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
// Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
// Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_2x.mif"
// Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
// Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_2x.hex"
// Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "1"
// Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"
// Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
// Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
@@ -254,7 +287,7 @@ endmodule
// Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
// Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
// Retrieval info: PRIVATE: SPREAD_USE STRING "0"
// Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "1"
// Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
// Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
// Retrieval info: PRIVATE: STICKY_CLK1 STRING "1"
// Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
@@ -270,28 +303,29 @@ endmodule
// Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "HIGH"
// Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1"
// Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
// Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "2"
// Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "1"
// Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
// Retrieval info: CONSTANT: CLK1_DIVIDE_BY NUMERIC "1"
// Retrieval info: CONSTANT: CLK1_DUTY_CYCLE NUMERIC "50"
// Retrieval info: CONSTANT: CLK1_MULTIPLY_BY NUMERIC "5"
// Retrieval info: CONSTANT: CLK1_MULTIPLY_BY NUMERIC "1"
// Retrieval info: CONSTANT: CLK1_PHASE_SHIFT STRING "0"
// Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
// Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "37037"
// Retrieval info: CONSTANT: INCLK1_INPUT_FREQUENCY NUMERIC "37037"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "SOURCE_SYNCHRONOUS"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
// Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
// Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
@@ -300,11 +334,11 @@ endmodule
// Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
@@ -323,25 +357,46 @@ endmodule
// Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PRIMARY_CLOCK STRING "inclk0"
// Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "OFF"
// Retrieval info: CONSTANT: SWITCH_OVER_TYPE STRING "MANUAL"
// Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"
// Retrieval info: CONSTANT: scan_chain_mif_file STRING "pll_2x.hex"
// Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"
// Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"
// Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
// Retrieval info: USED_PORT: c1 0 0 0 0 OUTPUT_CLK_EXT VCC "c1"
// Retrieval info: USED_PORT: clkswitch 0 0 0 0 INPUT GND "clkswitch"
// Retrieval info: USED_PORT: configupdate 0 0 0 0 INPUT GND "configupdate"
// Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
// Retrieval info: USED_PORT: inclk1 0 0 0 0 INPUT_CLK_EXT GND "inclk1"
// Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
// Retrieval info: USED_PORT: scanclk 0 0 0 0 INPUT_CLK_EXT VCC "scanclk"
// Retrieval info: USED_PORT: scanclkena 0 0 0 0 INPUT GND "scanclkena"
// Retrieval info: USED_PORT: scandata 0 0 0 0 INPUT GND "scandata"
// Retrieval info: USED_PORT: scandataout 0 0 0 0 OUTPUT VCC "scandataout"
// Retrieval info: USED_PORT: scandone 0 0 0 0 OUTPUT VCC "scandone"
// Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0
// Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
// Retrieval info: CONNECT: @clkswitch 0 0 0 0 clkswitch 0 0 0 0
// Retrieval info: CONNECT: @configupdate 0 0 0 0 configupdate 0 0 0 0
// Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
// Retrieval info: CONNECT: @inclk 0 0 1 1 inclk1 0 0 0 0
// Retrieval info: CONNECT: @scanclk 0 0 0 0 scanclk 0 0 0 0
// Retrieval info: CONNECT: @scanclkena 0 0 0 0 scanclkena 0 0 0 0
// Retrieval info: CONNECT: @scandata 0 0 0 0 scandata 0 0 0 0
// Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
// Retrieval info: CONNECT: c1 0 0 0 0 @clk 0 0 1 1
// Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
// Retrieval info: CONNECT: scandataout 0 0 0 0 @scandataout 0 0 0 0
// Retrieval info: CONNECT: scandone 0 0 0 0 @scandone 0 0 0 0
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x.ppf TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x.bsf FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x_inst.v FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x_inst.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x_bb.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x.mif TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_2x.hex TRUE
// Retrieval info: LIB_FILE: altera_mf
// Retrieval info: CBX_MODULE_PREFIX: ON
-12
View File
@@ -1,12 +0,0 @@
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE pinplan>
<pinplan intended_family="Cyclone IV E" variation_name="pll_3x" megafunction_name="ALTPLL" specifies="all_ports">
<global>
<pin name="areset" direction="input" scope="external" />
<pin name="inclk0" direction="input" scope="external" source="clock" />
<pin name="c0" direction="output" scope="external" source="clock" />
<pin name="c1" direction="output" scope="external" source="clock" />
<pin name="locked" direction="output" scope="external" />
</global>
</pinplan>
-5
View File
@@ -1,5 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "ALTPLL"
set_global_assignment -name IP_TOOL_VERSION "17.1"
set_global_assignment -name IP_GENERATED_DEVICE_FAMILY "{Cyclone IV E}"
set_global_assignment -name VERILOG_FILE [file join $::quartus(qip_path) "pll_3x.v"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "pll_3x.ppf"]
-347
View File
@@ -1,347 +0,0 @@
// megafunction wizard: %ALTPLL%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altpll
// ============================================================
// File Name: pll_3x.v
// Megafunction Name(s):
// altpll
//
// Simulation Library Files(s):
//
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 17.1.0 Build 590 10/25/2017 SJ Lite Edition
// ************************************************************
//Copyright (C) 2017 Intel Corporation. All rights reserved.
//Your use of Intel Corporation's design tools, logic functions
//and other software and tools, and its AMPP partner logic
//functions, and any output files from any of the foregoing
//(including device programming or simulation files), and any
//associated documentation or information are expressly subject
//to the terms and conditions of the Intel Program License
//Subscription Agreement, the Intel Quartus Prime License Agreement,
//the Intel FPGA IP License Agreement, or other applicable license
//agreement, including, without limitation, that your use is for
//the sole purpose of programming logic devices manufactured by
//Intel and sold by Intel or its authorized distributors. Please
//refer to the applicable agreement for further details.
// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module pll_3x (
areset,
inclk0,
c0,
c1,
locked);
input areset;
input inclk0;
output c0;
output c1;
output locked;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
tri0 areset;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif
wire [4:0] sub_wire0;
wire sub_wire3;
wire [0:0] sub_wire6 = 1'h0;
wire [1:1] sub_wire2 = sub_wire0[1:1];
wire [0:0] sub_wire1 = sub_wire0[0:0];
wire c0 = sub_wire1;
wire c1 = sub_wire2;
wire locked = sub_wire3;
wire sub_wire4 = inclk0;
wire [1:0] sub_wire5 = {sub_wire6, sub_wire4};
altpll altpll_component (
.areset (areset),
.inclk (sub_wire5),
.clk (sub_wire0),
.locked (sub_wire3),
.activeclock (),
.clkbad (),
.clkena ({6{1'b1}}),
.clkloss (),
.clkswitch (1'b0),
.configupdate (1'b0),
.enable0 (),
.enable1 (),
.extclk (),
.extclkena ({4{1'b1}}),
.fbin (1'b1),
.fbmimicbidir (),
.fbout (),
.fref (),
.icdrclk (),
.pfdena (1'b1),
.phasecounterselect ({4{1'b1}}),
.phasedone (),
.phasestep (1'b1),
.phaseupdown (1'b1),
.pllena (1'b1),
.scanaclr (1'b0),
.scanclk (1'b0),
.scanclkena (1'b1),
.scandata (1'b0),
.scandataout (),
.scandone (),
.scanread (1'b0),
.scanwrite (1'b0),
.sclkout0 (),
.sclkout1 (),
.vcooverrange (),
.vcounderrange ());
defparam
altpll_component.bandwidth_type = "HIGH",
altpll_component.clk0_divide_by = 1,
altpll_component.clk0_duty_cycle = 50,
altpll_component.clk0_multiply_by = 3,
altpll_component.clk0_phase_shift = "0",
altpll_component.clk1_divide_by = 1,
altpll_component.clk1_duty_cycle = 50,
altpll_component.clk1_multiply_by = 4,
altpll_component.clk1_phase_shift = "0",
altpll_component.compensate_clock = "CLK0",
altpll_component.inclk0_input_frequency = 37037,
altpll_component.intended_device_family = "Cyclone IV E",
altpll_component.lpm_hint = "CBX_MODULE_PREFIX=pll_3x",
altpll_component.lpm_type = "altpll",
altpll_component.operation_mode = "SOURCE_SYNCHRONOUS",
altpll_component.pll_type = "AUTO",
altpll_component.port_activeclock = "PORT_UNUSED",
altpll_component.port_areset = "PORT_USED",
altpll_component.port_clkbad0 = "PORT_UNUSED",
altpll_component.port_clkbad1 = "PORT_UNUSED",
altpll_component.port_clkloss = "PORT_UNUSED",
altpll_component.port_clkswitch = "PORT_UNUSED",
altpll_component.port_configupdate = "PORT_UNUSED",
altpll_component.port_fbin = "PORT_UNUSED",
altpll_component.port_inclk0 = "PORT_USED",
altpll_component.port_inclk1 = "PORT_UNUSED",
altpll_component.port_locked = "PORT_USED",
altpll_component.port_pfdena = "PORT_UNUSED",
altpll_component.port_phasecounterselect = "PORT_UNUSED",
altpll_component.port_phasedone = "PORT_UNUSED",
altpll_component.port_phasestep = "PORT_UNUSED",
altpll_component.port_phaseupdown = "PORT_UNUSED",
altpll_component.port_pllena = "PORT_UNUSED",
altpll_component.port_scanaclr = "PORT_UNUSED",
altpll_component.port_scanclk = "PORT_UNUSED",
altpll_component.port_scanclkena = "PORT_UNUSED",
altpll_component.port_scandata = "PORT_UNUSED",
altpll_component.port_scandataout = "PORT_UNUSED",
altpll_component.port_scandone = "PORT_UNUSED",
altpll_component.port_scanread = "PORT_UNUSED",
altpll_component.port_scanwrite = "PORT_UNUSED",
altpll_component.port_clk0 = "PORT_USED",
altpll_component.port_clk1 = "PORT_USED",
altpll_component.port_clk2 = "PORT_UNUSED",
altpll_component.port_clk3 = "PORT_UNUSED",
altpll_component.port_clk4 = "PORT_UNUSED",
altpll_component.port_clk5 = "PORT_UNUSED",
altpll_component.port_clkena0 = "PORT_UNUSED",
altpll_component.port_clkena1 = "PORT_UNUSED",
altpll_component.port_clkena2 = "PORT_UNUSED",
altpll_component.port_clkena3 = "PORT_UNUSED",
altpll_component.port_clkena4 = "PORT_UNUSED",
altpll_component.port_clkena5 = "PORT_UNUSED",
altpll_component.port_extclk0 = "PORT_UNUSED",
altpll_component.port_extclk1 = "PORT_UNUSED",
altpll_component.port_extclk2 = "PORT_UNUSED",
altpll_component.port_extclk3 = "PORT_UNUSED",
altpll_component.self_reset_on_loss_lock = "OFF",
altpll_component.width_clock = 5;
endmodule
// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
// Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "1"
// Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
// Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "High"
// Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "1"
// Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
// Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
// Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
// Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
// Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
// Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
// Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "c0"
// Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "7"
// Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
// Retrieval info: PRIVATE: DIV_FACTOR1 NUMERIC "1"
// Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
// Retrieval info: PRIVATE: DUTY_CYCLE1 STRING "50.00000000"
// Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE0 STRING "81.000000"
// Retrieval info: PRIVATE: EFF_OUTPUT_FREQ_VALUE1 STRING "108.000000"
// Retrieval info: PRIVATE: EXPLICIT_SWITCHOVER_COUNTER STRING "0"
// Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
// Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
// Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
// Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
// Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "27.000"
// Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
// Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "1"
// Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "Not Available"
// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
// Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
// Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT1 STRING "deg"
// Retrieval info: PRIVATE: MIG_DEVICE_SPEED_GRADE STRING "Any"
// Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
// Retrieval info: PRIVATE: MIRROR_CLK1 STRING "0"
// Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "3"
// Retrieval info: PRIVATE: MULT_FACTOR1 NUMERIC "4"
// Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "0"
// Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000"
// Retrieval info: PRIVATE: OUTPUT_FREQ1 STRING "100.00000000"
// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE1 STRING "0"
// Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
// Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT1 STRING "MHz"
// Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "1"
// Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
// Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
// Retrieval info: PRIVATE: PHASE_SHIFT1 STRING "0.00000000"
// Retrieval info: PRIVATE: PHASE_SHIFT_STEP_ENABLED_CHECK STRING "0"
// Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "deg"
// Retrieval info: PRIVATE: PHASE_SHIFT_UNIT1 STRING "deg"
// Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
// Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1"
// Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
// Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: PLL_FBMIMIC_CHECK STRING "0"
// Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
// Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
// Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
// Retrieval info: PRIVATE: RECONFIG_FILE STRING "pll_2x.mif"
// Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
// Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "1"
// Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
// Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
// Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
// Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
// Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
// Retrieval info: PRIVATE: SPREAD_USE STRING "0"
// Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "1"
// Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
// Retrieval info: PRIVATE: STICKY_CLK1 STRING "1"
// Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
// Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "1"
// Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
// Retrieval info: PRIVATE: USE_CLK0 STRING "1"
// Retrieval info: PRIVATE: USE_CLK1 STRING "1"
// Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
// Retrieval info: PRIVATE: USE_CLKENA1 STRING "0"
// Retrieval info: PRIVATE: USE_MIL_SPEED_GRADE NUMERIC "0"
// Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
// Retrieval info: CONSTANT: BANDWIDTH_TYPE STRING "HIGH"
// Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1"
// Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
// Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "3"
// Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
// Retrieval info: CONSTANT: CLK1_DIVIDE_BY NUMERIC "1"
// Retrieval info: CONSTANT: CLK1_DUTY_CYCLE NUMERIC "50"
// Retrieval info: CONSTANT: CLK1_MULTIPLY_BY NUMERIC "4"
// Retrieval info: CONSTANT: CLK1_PHASE_SHIFT STRING "0"
// Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
// Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "37037"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "SOURCE_SYNCHRONOUS"
// Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
// Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_USED"
// Retrieval info: CONSTANT: PORT_clk2 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clkena2 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
// Retrieval info: CONSTANT: SELF_RESET_ON_LOSS_LOCK STRING "OFF"
// Retrieval info: CONSTANT: WIDTH_CLOCK NUMERIC "5"
// Retrieval info: USED_PORT: @clk 0 0 5 0 OUTPUT_CLK_EXT VCC "@clk[4..0]"
// Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"
// Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
// Retrieval info: USED_PORT: c1 0 0 0 0 OUTPUT_CLK_EXT VCC "c1"
// Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
// Retrieval info: USED_PORT: locked 0 0 0 0 OUTPUT GND "locked"
// Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0
// Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
// Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
// Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
// Retrieval info: CONNECT: c1 0 0 0 0 @clk 0 0 1 1
// Retrieval info: CONNECT: locked 0 0 0 0 @locked 0 0 0 0
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_3x.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_3x.ppf TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_3x.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_3x.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_3x.bsf FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_3x_inst.v FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL pll_3x_bb.v FALSE
// Retrieval info: CBX_MODULE_PREFIX: ON
+174
View File
@@ -0,0 +1,174 @@
-- Copyright (C) 2017 Intel Corporation. All rights reserved.
-- Your use of Intel Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Intel Program License
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
-- the Intel FPGA IP License Agreement, or other applicable license
-- agreement, including, without limitation, that your use is for
-- the sole purpose of programming logic devices manufactured by
-- Intel and sold by Intel or its authorized distributors. Please
-- refer to the applicable agreement for further details.
-- MIF file representing initial state of PLL Scan Chain
-- Device Family: Cyclone IV E
-- Device Part: -
-- Device Speed Grade: 8
-- PLL Scan Chain: Fast PLL (144 bits)
-- File Name: /home/markus/Code/ossc/rtl/pll_config_2x_5x_data.mif
-- Generated: Sat Oct 5 23:56:40 2019
WIDTH=1;
DEPTH=144;
ADDRESS_RADIX=UNS;
DATA_RADIX=UNS;
CONTENT BEGIN
0 : 0; -- Reserved Bits = 0 (1 bit(s))
1 : 0; -- Reserved Bits = 0 (1 bit(s))
2 : 0; -- Loop Filter Capacitance = 0 (2 bit(s)) (Setting 0)
3 : 0;
4 : 1; -- Loop Filter Resistance = 27 (5 bit(s)) (Setting 27)
5 : 1;
6 : 0;
7 : 1;
8 : 1;
9 : 1; -- VCO Post Scale = 1 (1 bit(s)) (VCO post-scale divider counter value = 1)
10 : 0; -- Reserved Bits = 0 (5 bit(s))
11 : 0;
12 : 0;
13 : 0;
14 : 0;
15 : 0; -- Charge Pump Current = 1 (3 bit(s)) (Setting 1)
16 : 0;
17 : 1;
18 : 1; -- N counter: Bypass = 1 (1 bit(s))
19 : 0; -- N counter: High Count = 0 (8 bit(s))
20 : 0;
21 : 0;
22 : 0;
23 : 0;
24 : 0;
25 : 0;
26 : 0;
27 : 0; -- N counter: Odd Division = 0 (1 bit(s))
28 : 0; -- N counter: Low Count = 0 (8 bit(s))
29 : 0;
30 : 0;
31 : 0;
32 : 0;
33 : 0;
34 : 0;
35 : 0;
36 : 0; -- M counter: Bypass = 0 (1 bit(s))
37 : 0; -- M counter: High Count = 15 (8 bit(s))
38 : 0;
39 : 0;
40 : 0;
41 : 1;
42 : 1;
43 : 1;
44 : 1;
45 : 0; -- M counter: Odd Division = 0 (1 bit(s))
46 : 0; -- M counter: Low Count = 15 (8 bit(s))
47 : 0;
48 : 0;
49 : 0;
50 : 1;
51 : 1;
52 : 1;
53 : 1;
54 : 0; -- clk0 counter: Bypass = 0 (1 bit(s))
55 : 0; -- clk0 counter: High Count = 8 (8 bit(s))
56 : 0;
57 : 0;
58 : 0;
59 : 1;
60 : 0;
61 : 0;
62 : 0;
63 : 1; -- clk0 counter: Odd Division = 1 (1 bit(s))
64 : 0; -- clk0 counter: Low Count = 7 (8 bit(s))
65 : 0;
66 : 0;
67 : 0;
68 : 0;
69 : 1;
70 : 1;
71 : 1;
72 : 0; -- clk1 counter: Bypass = 0 (1 bit(s))
73 : 0; -- clk1 counter: High Count = 3 (8 bit(s))
74 : 0;
75 : 0;
76 : 0;
77 : 0;
78 : 0;
79 : 1;
80 : 1;
81 : 0; -- clk1 counter: Odd Division = 0 (1 bit(s))
82 : 0; -- clk1 counter: Low Count = 3 (8 bit(s))
83 : 0;
84 : 0;
85 : 0;
86 : 0;
87 : 0;
88 : 1;
89 : 1;
90 : 1; -- clk2 counter: Bypass = 1 (1 bit(s))
91 : 0; -- clk2 counter: High Count = 0 (8 bit(s))
92 : 0;
93 : 0;
94 : 0;
95 : 0;
96 : 0;
97 : 0;
98 : 0;
99 : 0; -- clk2 counter: Odd Division = 0 (1 bit(s))
100 : 0; -- clk2 counter: Low Count = 0 (8 bit(s))
101 : 0;
102 : 0;
103 : 0;
104 : 0;
105 : 0;
106 : 0;
107 : 0;
108 : 1; -- clk3 counter: Bypass = 1 (1 bit(s))
109 : 0; -- clk3 counter: High Count = 0 (8 bit(s))
110 : 0;
111 : 0;
112 : 0;
113 : 0;
114 : 0;
115 : 0;
116 : 0;
117 : 0; -- clk3 counter: Odd Division = 0 (1 bit(s))
118 : 0; -- clk3 counter: Low Count = 0 (8 bit(s))
119 : 0;
120 : 0;
121 : 0;
122 : 0;
123 : 0;
124 : 0;
125 : 0;
126 : 1; -- clk4 counter: Bypass = 1 (1 bit(s))
127 : 0; -- clk4 counter: High Count = 0 (8 bit(s))
128 : 0;
129 : 0;
130 : 0;
131 : 0;
132 : 0;
133 : 0;
134 : 0;
135 : 0; -- clk4 counter: Odd Division = 0 (1 bit(s))
136 : 0; -- clk4 counter: Low Count = 0 (8 bit(s))
137 : 0;
138 : 0;
139 : 0;
140 : 0;
141 : 0;
142 : 0;
143 : 0;
END;
+174
View File
@@ -0,0 +1,174 @@
-- Copyright (C) 2017 Intel Corporation. All rights reserved.
-- Your use of Intel Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Intel Program License
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
-- the Intel FPGA IP License Agreement, or other applicable license
-- agreement, including, without limitation, that your use is for
-- the sole purpose of programming logic devices manufactured by
-- Intel and sold by Intel or its authorized distributors. Please
-- refer to the applicable agreement for further details.
-- MIF file representing initial state of PLL Scan Chain
-- Device Family: Cyclone IV E
-- Device Part: -
-- Device Speed Grade: 8
-- PLL Scan Chain: Fast PLL (144 bits)
-- File Name: /home/markus/Code/ossc/rtl/pll_config_3x_4x_data.mif
-- Generated: Sat Oct 5 23:58:13 2019
WIDTH=1;
DEPTH=144;
ADDRESS_RADIX=UNS;
DATA_RADIX=UNS;
CONTENT BEGIN
0 : 0; -- Reserved Bits = 0 (1 bit(s))
1 : 0; -- Reserved Bits = 0 (1 bit(s))
2 : 0; -- Loop Filter Capacitance = 0 (2 bit(s)) (Setting 0)
3 : 0;
4 : 1; -- Loop Filter Resistance = 27 (5 bit(s)) (Setting 27)
5 : 1;
6 : 0;
7 : 1;
8 : 1;
9 : 0; -- VCO Post Scale = 0 (1 bit(s)) (VCO post-scale divider counter value = 2)
10 : 0; -- Reserved Bits = 0 (5 bit(s))
11 : 0;
12 : 0;
13 : 0;
14 : 0;
15 : 0; -- Charge Pump Current = 1 (3 bit(s)) (Setting 1)
16 : 0;
17 : 1;
18 : 1; -- N counter: Bypass = 1 (1 bit(s))
19 : 0; -- N counter: High Count = 0 (8 bit(s))
20 : 0;
21 : 0;
22 : 0;
23 : 0;
24 : 0;
25 : 0;
26 : 0;
27 : 0; -- N counter: Odd Division = 0 (1 bit(s))
28 : 0; -- N counter: Low Count = 0 (8 bit(s))
29 : 0;
30 : 0;
31 : 0;
32 : 0;
33 : 0;
34 : 0;
35 : 0;
36 : 0; -- M counter: Bypass = 0 (1 bit(s))
37 : 0; -- M counter: High Count = 6 (8 bit(s))
38 : 0;
39 : 0;
40 : 0;
41 : 0;
42 : 1;
43 : 1;
44 : 0;
45 : 0; -- M counter: Odd Division = 0 (1 bit(s))
46 : 0; -- M counter: Low Count = 6 (8 bit(s))
47 : 0;
48 : 0;
49 : 0;
50 : 0;
51 : 1;
52 : 1;
53 : 0;
54 : 0; -- clk0 counter: Bypass = 0 (1 bit(s))
55 : 0; -- clk0 counter: High Count = 2 (8 bit(s))
56 : 0;
57 : 0;
58 : 0;
59 : 0;
60 : 0;
61 : 1;
62 : 0;
63 : 0; -- clk0 counter: Odd Division = 0 (1 bit(s))
64 : 0; -- clk0 counter: Low Count = 2 (8 bit(s))
65 : 0;
66 : 0;
67 : 0;
68 : 0;
69 : 0;
70 : 1;
71 : 0;
72 : 0; -- clk1 counter: Bypass = 0 (1 bit(s))
73 : 0; -- clk1 counter: High Count = 2 (8 bit(s))
74 : 0;
75 : 0;
76 : 0;
77 : 0;
78 : 0;
79 : 1;
80 : 0;
81 : 1; -- clk1 counter: Odd Division = 1 (1 bit(s))
82 : 0; -- clk1 counter: Low Count = 1 (8 bit(s))
83 : 0;
84 : 0;
85 : 0;
86 : 0;
87 : 0;
88 : 0;
89 : 1;
90 : 1; -- clk2 counter: Bypass = 1 (1 bit(s))
91 : 0; -- clk2 counter: High Count = 0 (8 bit(s))
92 : 0;
93 : 0;
94 : 0;
95 : 0;
96 : 0;
97 : 0;
98 : 0;
99 : 0; -- clk2 counter: Odd Division = 0 (1 bit(s))
100 : 0; -- clk2 counter: Low Count = 0 (8 bit(s))
101 : 0;
102 : 0;
103 : 0;
104 : 0;
105 : 0;
106 : 0;
107 : 0;
108 : 1; -- clk3 counter: Bypass = 1 (1 bit(s))
109 : 0; -- clk3 counter: High Count = 0 (8 bit(s))
110 : 0;
111 : 0;
112 : 0;
113 : 0;
114 : 0;
115 : 0;
116 : 0;
117 : 0; -- clk3 counter: Odd Division = 0 (1 bit(s))
118 : 0; -- clk3 counter: Low Count = 0 (8 bit(s))
119 : 0;
120 : 0;
121 : 0;
122 : 0;
123 : 0;
124 : 0;
125 : 0;
126 : 1; -- clk4 counter: Bypass = 1 (1 bit(s))
127 : 0; -- clk4 counter: High Count = 0 (8 bit(s))
128 : 0;
129 : 0;
130 : 0;
131 : 0;
132 : 0;
133 : 0;
134 : 0;
135 : 0; -- clk4 counter: Odd Division = 0 (1 bit(s))
136 : 0; -- clk4 counter: Low Count = 0 (8 bit(s))
137 : 0;
138 : 0;
139 : 0;
140 : 0;
141 : 0;
142 : 0;
143 : 0;
END;
+52 -43
View File
@@ -33,11 +33,11 @@
`define V_MULTMODE_4X 3'd3
`define V_MULTMODE_5X 3'd4
`define PCLK_MUX_1X 3'd0
`define PCLK_MUX_2X 3'd1
`define PCLK_MUX_3X 3'd2
`define PCLK_MUX_4X 3'd3
`define PCLK_MUX_5X 3'd4
`define PCLK_MUX_1X 2'd0
`define PCLK_MUX_2X 2'd2
`define PCLK_MUX_3X 2'd2
`define PCLK_MUX_4X 2'd3
`define PCLK_MUX_5X 2'd3
`define H_MULTMODE_FULLWIDTH 2'h0
`define H_MULTMODE_ASPECTFIX 2'h1
@@ -82,23 +82,23 @@ module scanconverter (
input HSYNC_in,
input PCLK_in,
input clk27,
input enable_sc,
input [31:0] h_config,
input [31:0] h_config2,
input [31:0] v_config,
input [31:0] misc_config,
input [31:0] sl_config,
input [31:0] sl_config2,
output PCLK_out,
output reg [7:0] R_out,
output reg [7:0] G_out,
output reg [7:0] B_out,
output reg HSYNC_out,
output reg VSYNC_out,
output PCLK_out,
output reg DE_out,
output h_unstable,
output reg [1:0] fpga_vsyncgen,
output [1:0] pclk_lock,
output [1:0] pll_lock_lost,
output pll_lock_lost,
output reg [10:0] vmax,
output reg [10:0] vmax_tvp,
output reg [19:0] pcnt_frame,
@@ -109,14 +109,20 @@ module scanconverter (
input osd_enable,
input osd_color,
output reg [10:0] xpos,
output reg [10:0] ypos
output reg [10:0] ypos,
input pll_areset,
input pll_scanclk,
input pll_scanclkena,
input pll_configupdate,
input pll_scandata,
output pll_scandone
);
//clock-related signals
wire pclk_act;
wire pclk_1x, pclk_2x, pclk_3x, pclk_4x, pclk_5x;
wire pclk_2x_lock, pclk_3x_lock;
wire [2:0] pclk_mux_sel;
wire [1:0] pclk_mux_sel;
wire pll_lock;
//RGB signals&registers: 8 bits per component -> 16.7M colors
wire [7:0] R_act, G_act, B_act;
@@ -148,7 +154,7 @@ reg [11:0] hmax[0:1];
reg line_idx;
reg [1:0] line_out_idx_2x, line_out_idx_3x, line_out_idx_4x;
reg [2:0] line_out_idx_5x;
reg [23:0] warn_h_unstable, warn_pll_lock_lost, warn_pll_lock_lost_3x;
reg [23:0] warn_h_unstable, warn_pll_lock_lost;
// post-processing pipeline
reg HSYNC_pp[1:`PP_PIPELINE_LENGTH] /* synthesis ramstyle = "logic" */;
@@ -234,7 +240,6 @@ reg [19:0] pcnt_ctr;
assign pclk_1x = PCLK_in;
assign PCLK_out = pclk_act;
assign pclk_lock = {pclk_2x_lock, pclk_3x_lock};
assign ilace_flag = (FID_cur != FID_last);
//Scanline generation
@@ -481,22 +486,41 @@ case (V_MULTMODE)
end
endcase
//TODO: use single PLL and ALTPLL_RECONFIG
pll_2x pll_linedouble (
.areset ( (V_MULTMODE != `V_MULTMODE_2X) & (V_MULTMODE != `V_MULTMODE_5X) ),
.inclk0 ( PCLK_in ),
.c0 ( pclk_2x ),
.c1 ( pclk_5x ),
.locked ( pclk_2x_lock )
pll_2x pll_pclk (
.areset(pll_areset),
.clkswitch(enable_sc),
.configupdate(pll_configupdate),
.inclk0(clk27), // set videogen clock to primary (power-on default) since both reference clocks must be running during switchover
.inclk1(PCLK_in), // is the secondary input clock fully compensated?
.scanclk(pll_scanclk),
.scanclkena(pll_scanclkena),
.scandata(pll_scandata),
.c0(pclk_2x), // pclk_3x in secondary config
.c1(pclk_5x), // pclk_4x in secondary config
.locked(pll_lock),
.scandataout(),
.scandone(pll_scandone)
);
pll_3x pll_linetriple (
.areset ( (V_MULTMODE != `V_MULTMODE_3X) & (V_MULTMODE != `V_MULTMODE_4X) ),
.inclk0 ( PCLK_in ),
.c0 ( pclk_3x ),
.c1 ( pclk_4x ),
.locked ( pclk_3x_lock )
assign pclk_3x = pclk_2x;
assign pclk_4x = pclk_5x;
cycloneive_clkctrl clkctrl1 (
.clkselect(enable_sc ? pclk_mux_sel : 2'h2),
.ena(1'b1),
.inclk({pclk_5x, pclk_2x, 1'b0, pclk_1x}), // fitter forbids using both clk27 and pclk_1x here since they're on opposite sides
.outclk(pclk_act)
// synopsys translate_off
,
.devclrn(1'b1),
.devpor(1'b1)
// synopsys translate_on
);
defparam
clkctrl1.clock_type = "Global Clock",
clkctrl1.ena_register_mode = "falling edge",
clkctrl1.lpm_type = "cycloneive_clkctrl";
wire [11:0] linebuf_rdaddr = linebuf_hoffset-H_AVIDSTART;
wire [11:0] linebuf_wraddr = hcnt_1x-H_AVIDSTART;
@@ -512,15 +536,6 @@ linebuf linebuf_rgb (
.q ( {R_lbuf, G_lbuf, B_lbuf} )
);
mux5 mux5_inst (
.data0 ( pclk_1x ),
.data1 ( pclk_2x ),
.data2 ( pclk_3x ),
.data3 ( pclk_4x ),
.data4 ( pclk_5x ),
.sel ( pclk_mux_sel ),
.result ( pclk_act )
);
//Postprocess pipeline
//
@@ -714,27 +729,21 @@ begin
if (!reset_n) begin
warn_h_unstable <= 1'b0;
warn_pll_lock_lost <= 1'b0;
warn_pll_lock_lost_3x <= 1'b0;
end else begin
if (hmax[0] != hmax[1])
warn_h_unstable <= 1;
else if (warn_h_unstable != 0)
warn_h_unstable <= warn_h_unstable + 1'b1;
if (((V_MULTMODE == `V_MULTMODE_2X) | (V_MULTMODE == `V_MULTMODE_5X)) & ~pclk_2x_lock)
if ((V_MULTMODE > `V_MULTMODE_1X) & ~pll_lock)
warn_pll_lock_lost <= 1;
else if (warn_pll_lock_lost != 0)
warn_pll_lock_lost <= warn_pll_lock_lost + 1'b1;
if (((V_MULTMODE == `V_MULTMODE_3X) | (V_MULTMODE == `V_MULTMODE_4X)) & ~pclk_3x_lock)
warn_pll_lock_lost_3x <= 1;
else if (warn_pll_lock_lost_3x != 0)
warn_pll_lock_lost_3x <= warn_pll_lock_lost_3x + 1'b1;
end
end
assign h_unstable = (warn_h_unstable != 0);
assign pll_lock_lost = {(warn_pll_lock_lost != 0), (warn_pll_lock_lost_3x != 0)};
assign pll_lock_lost = (warn_pll_lock_lost != 0);
//Detect if TVP7002 is skipping VSYNCs. This occurs for interlaced signals fed via digital sync inputs,
//causing TVP7002 not to regenerate VSYNC for field 1. Moreover, if leading edges of HSYNC and VSYNC are
+3 -6
View File
@@ -31,8 +31,7 @@ module videogen (
output reg [7:0] B_out,
output reg HSYNC_out,
output reg VSYNC_out,
output PCLK_out,
output reg ENABLE_out,
output reg DE_out,
output reg [9:0] xpos,
output reg [9:0] ypos
);
@@ -67,8 +66,6 @@ parameter Y_START = V_SYNCLEN + V_BACKPORCH;
reg [9:0] h_cnt; //max. 1024
reg [9:0] v_cnt; //max. 1024
assign PCLK_out = clk27;
//HSYNC gen (negative polarity)
always @(posedge clk27 or negedge reset_n)
begin
@@ -124,7 +121,7 @@ begin
R_out <= 8'h00;
G_out <= 8'h00;
B_out <= 8'h00;
ENABLE_out <= 1'b0;
DE_out <= 1'b0;
end else begin
if (osd_enable) begin
R_out <= {8{osd_color}};
@@ -156,7 +153,7 @@ begin
{R_out, G_out, B_out} <= {3{8'((xpos - (H_OVERSCAN+H_BORDER)) >> 1)}};
end
ENABLE_out <= (h_cnt >= X_START && h_cnt < X_START + H_ACTIVE && v_cnt >= Y_START && v_cnt < Y_START + V_ACTIVE);
DE_out <= (h_cnt >= X_START && h_cnt < X_START + H_ACTIVE && v_cnt >= Y_START && v_cnt < Y_START + V_ACTIVE);
end
end