mirror of
https://github.com/marqs85/ossc
synced 2025-10-31 16:06:02 +03:00
93 lines
4.8 KiB
Tcl
93 lines
4.8 KiB
Tcl
### CPU clock constraints ###
|
|
|
|
create_clock -period 27MHz -name clk27 [get_ports clk27]
|
|
|
|
set_input_delay -clock clk27 0 [get_ports {sda scl SD_CMD SD_DAT*}]
|
|
set_false_path -from [get_ports {btn* cfg* ir_rx HDMI_TX_INT_N LED_R}]
|
|
set_false_path -to {sys:sys_inst|sys_pio_1:pio_1|readdata*}
|
|
|
|
create_generated_clock -name flash_clk -divide_by 2 -source clk27 [get_pins sys:sys_inst|sys_intel_generic_serial_flash_interface_top_0:intel_generic_serial_flash_interface_top_0|sys_intel_generic_serial_flash_interface_top_0_qspi_inf_inst:qspi_inf_inst|flash_clk_reg|q]
|
|
create_generated_clock -name flash_clk_out -master_clock flash_clk -source [get_pins sys:sys_inst|sys_intel_generic_serial_flash_interface_top_0:intel_generic_serial_flash_interface_top_0|sys_intel_generic_serial_flash_interface_top_0_qspi_inf_inst:qspi_inf_inst|flash_clk_reg|q] -multiply_by 1 [get_ports *ALTERA_DCLK]
|
|
|
|
### Scanconverter clock constraints ###
|
|
|
|
create_clock -period 165MHz -name pclk_tvp_high [get_ports TVP_PCLK_i]
|
|
create_clock -period 33MHz -name pclk_tvp_low [get_ports TVP_PCLK_i] -add
|
|
|
|
#derive_pll_clocks
|
|
create_generated_clock -name pclk_5x -master_clock pclk_tvp_low -source {pll_pclk|altpll_component|auto_generated|pll1|inclk[1]} -multiply_by 5 -duty_cycle 50.00 {pll_pclk|altpll_component|auto_generated|pll1|clk[0]}
|
|
create_generated_clock -name pclk_27mhz -master_clock clk27 -source {pll_pclk|altpll_component|auto_generated|pll1|inclk[0]} -multiply_by 1 -duty_cycle 50.00 {pll_pclk|altpll_component|auto_generated|pll1|clk[0]} -add
|
|
|
|
# retrieve post-mapping clkmux output pin
|
|
set clkmux_output [get_pins clkctrl1|outclk]
|
|
|
|
# specify postmux clocks which clock postprocess pipeline
|
|
create_generated_clock -name pclk_1x_postmux -master_clock pclk_tvp_high -source [get_pins clkctrl1|inclk[0]] -multiply_by 1 $clkmux_output
|
|
create_generated_clock -name pclk_5x_postmux -master_clock pclk_5x -source [get_pins clkctrl1|inclk[2]] -multiply_by 1 $clkmux_output -add
|
|
create_generated_clock -name pclk_27mhz_postmux -master_clock pclk_27mhz -source [get_pins clkctrl1|inclk[2]] -multiply_by 1 $clkmux_output -add
|
|
|
|
# specify output clocks that drive PCLK output pin
|
|
set pclk_out_port [get_ports HDMI_TX_PCLK]
|
|
create_generated_clock -name pclk_1x_out -master_clock pclk_1x_postmux -source $clkmux_output -multiply_by 1 $pclk_out_port
|
|
create_generated_clock -name pclk_5x_out -master_clock pclk_5x_postmux -source $clkmux_output -multiply_by 1 $pclk_out_port -add
|
|
create_generated_clock -name pclk_27mhz_out -master_clock pclk_27mhz_postmux -source $clkmux_output -multiply_by 1 $pclk_out_port -add
|
|
|
|
derive_clock_uncertainty
|
|
|
|
# input delay constraints
|
|
set TVP_dmin 0
|
|
set TVP_dmax 1.5
|
|
set critinputs [get_ports {TVP_R_i* TVP_G_i* TVP_B_i* TVP_HS_i TVP_SOG_i TVP_VSYNC_i}]
|
|
foreach_in_collection c [get_clocks "pclk_tvp*"] {
|
|
set_input_delay -clock $c -min $TVP_dmin $critinputs -add_delay
|
|
set_input_delay -clock $c -max $TVP_dmax $critinputs -add_delay
|
|
}
|
|
|
|
# output delay constraints as documented in the IT6613 datasheet
|
|
# -- increased IT_Tsu from 1.0 to 1.5 due to #52
|
|
set IT_Tsu 1.5
|
|
set IT_Th -0.5
|
|
set critoutputs_hdmi [get_ports {HDMI_TX_RD* HDMI_TX_GD* HDMI_TX_BD* HDMI_TX_DE HDMI_TX_HS HDMI_TX_VS}]
|
|
foreach_in_collection c [get_clocks pclk_*_out] {
|
|
set_output_delay -clock $c -min $IT_Th $critoutputs_hdmi -add
|
|
set_output_delay -clock $c -max $IT_Tsu $critoutputs_hdmi -add
|
|
}
|
|
set_false_path -to [remove_from_collection [all_outputs] $critoutputs_hdmi]
|
|
|
|
# Lumacode (constrained to max. 60MHz sampling)
|
|
set_max_delay 16.6 -from [get_registers sys:sys_inst|sc_config_top:sc_config_0|altsyncram:lumacode_pal_ram|*]
|
|
|
|
# Flash controller (delays from N25Q128A datasheet)
|
|
set_input_delay -clock flash_clk_out -clock_fall 5 [get_ports *ALTERA_DATA0]
|
|
set_output_delay -clock flash_clk_out 4 [get_ports *ALTERA_SCE]
|
|
set_output_delay -clock flash_clk_out 2 [get_ports *ALTERA_SDO]
|
|
|
|
# Latency tester
|
|
set_false_path -from [get_registers lat_tester:lt0|mode_synced*]
|
|
|
|
|
|
### CPU/scanconverter clock relations ###
|
|
|
|
# Treat CPU clock asynchronous to pixel clocks
|
|
set_clock_groups -asynchronous -group \
|
|
{clk27} \
|
|
{pclk_27mhz pclk_27mhz_postmux pclk_27mhz_out} \
|
|
{pclk_tvp_low} \
|
|
{pclk_tvp_high} \
|
|
{pclk_1x_postmux pclk_1x_out} \
|
|
{pclk_5x pclk_5x_postmux pclk_5x_out}
|
|
|
|
|
|
### JTAG Signal Constraints ###
|
|
|
|
#constrain the TCK port
|
|
#create_clock -name tck -period "10MHz" [get_ports altera_reserved_tck]
|
|
#cut all paths to and from tck
|
|
set_clock_groups -exclusive -group [get_clocks altera_reserved_tck]
|
|
#constrain the TDI port
|
|
set_input_delay -clock altera_reserved_tck 20 [get_ports altera_reserved_tdi]
|
|
#constrain the TMS port
|
|
set_input_delay -clock altera_reserved_tck 20 [get_ports altera_reserved_tms]
|
|
#constrain the TDO port
|
|
#set_output_delay -clock altera_reserved_tck 20 [get_ports altera_reserved_tdo]
|