RomanRom2/ossc
1
0
Fork 0
mirror of https://github.com/marqs85/ossc synced 2025-10-31 16:06:02 +03:00
Code Issues Actions Packages Projects Releases Wiki Activity
c7e6719b24
ossc/software/sys_controller_bsp/mem_init.mk
marqs d98c23c8c1 Update project files to Quartus 17.0.
2017-05-29 19:15:34 +03:00

363 lines
11 KiB
Makefile
Raw Blame History

#########################################################################
####### M E M I N I T M A K E F I L E C O N T E N T ######
#########################################################################
#########################################################################
# This file is intended to be included by public.mk
#
#
# The following variables must be defined before including this file:
# - ELF
#
# The following variables may be defined to override the default behavior:
# - HDL_SIM_DIR
# - HDL_SIM_INSTALL_DIR
# - MEM_INIT_DIR
# - MEM_INIT_INSTALL_DIR
# - QUARTUS_PROJECT_DIR
# - SOPC_NAME
# - SIM_OPTIMIZE
# - RESET_ADDRESS
#
#########################################################################
ifeq ($(MEM_INIT_FILE),)
# MEM_INIT_FILE should be set equal to the working relative path to this
# mem_init.mk makefile fragment
MEM_INIT_FILE := $(wildcard $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)))
endif
ifeq ($(ELF2DAT),)
ELF2DAT := elf2dat
endif
ifeq ($(ELF2HEX),)
ELF2HEX := elf2hex
endif
ifeq ($(ELF2FLASH),)
ELF2FLASH := elf2flash
endif
ifeq ($(FLASH2DAT),)
FLASH2DAT := flash2dat
endif
ifeq ($(ALT_FILE_CONVERT),)
ALT_FILE_CONVERT := alt-file-convert
endif
ifeq ($(NM),)
NM := nios2-elf-nm
endif
ifeq ($(MKDIR),)
MKDIR := mkdir -p
endif
ifeq ($(RM),)
RM := rm -f
endif
ifeq ($(CP),)
CP := cp
endif
ifeq ($(ECHO),)
ECHO := echo
endif
MEM_INIT_DIR ?= mem_init
HDL_SIM_DIR ?= $(MEM_INIT_DIR)/hdl_sim
ifdef QUARTUS_PROJECT_DIR
MEM_INIT_INSTALL_DIR ?= $(patsubst %/,%,$(QUARTUS_PROJECT_DIR))
ifdef SOPC_NAME
HDL_SIM_INSTALL_DIR ?= $(patsubst %/,%,$(QUARTUS_PROJECT_DIR))/$(SOPC_NAME)_sim
endif
endif
MEM_INIT_DESCRIPTOR_FILE ?= $(MEM_INIT_DIR)/meminit.spd
MEM_INIT_QIP_FILE ?= $(MEM_INIT_DIR)/meminit.qip
#-------------------------------------
# Default Flash Boot Loaders
#-------------------------------------
BOOT_LOADER_PATH ?= $(SOPC_KIT_NIOS2)/components/altera_nios2
BOOT_LOADER_CFI ?= $(BOOT_LOADER_PATH)/boot_loader_cfi.srec
BOOT_LOADER_CFI_BE ?= $(BOOT_LOADER_PATH)/boot_loader_cfi_be.srec
#-------------------------------------
# Default Target
#-------------------------------------
.PHONY: default_mem_init
ifeq ($(QSYS),1)
default_mem_init: mem_init_generate
else
default_mem_init: mem_init_install
endif
#-------------------------------------
# Runtime Macros
#-------------------------------------
define post-process-info
@echo Post-processing to create $@...
endef
target_stem = $(notdir $(basename $@))
mem_start_address = $($(target_stem)_START)
mem_end_address = $($(target_stem)_END)
mem_span = $($(target_stem)_SPAN)
mem_width = $($(target_stem)_WIDTH)
mem_hex_width = $($(target_stem)_HEX_DATA_WIDTH)
mem_endianness = $($(target_stem)_ENDIANNESS)
mem_create_lanes = $($(target_stem)_CREATE_LANES)
mem_pad_flag = $($(target_stem)_PAD_FLAG)
mem_reloc_input_flag = $($(target_stem)_RELOC_INPUT_FLAG)
mem_no_zero_fill_flag = $($(target_stem)_NO_ZERO_FILL_FLAG)
flash_mem_epcs_flag = $($(target_stem)_EPCS_FLAGS)
flash_mem_cfi_flag = $($(target_stem)_CFI_FLAGS)
flash_mem_boot_loader_flag = $($(target_stem)_BOOT_LOADER_FLAG)
elf2dat_extra_args = $(mem_pad_flag)
elf2hex_extra_args = $(mem_no_zero_fill_flag)
elf2flash_extra_args = $(flash_mem_cfi_flag) $(flash_mem_epcs_flag) $(flash_mem_boot_loader_flag)
flash2dat_extra_args = $(mem_pad_flag) $(mem_reloc_input_flag)
#------------------------------------------------------------------------------
# BSP SPECIFIC CONTENT
#
# The content below is controlled by the BSP and SOPC System
#------------------------------------------------------------------------------
#START OF BSP SPECIFIC
#-------------------------------------
# Global Settings
#-------------------------------------
# The following TYPE comment allows tools to identify the 'type' of target this
# makefile is associated with.
# TYPE: BSP_MEMINIT_MAKEFILE
# This following VERSION comment indicates the version of the tool used to
# generate this makefile. A makefile variable is provided for VERSION as well.
# ACDS_VERSION: 17.0
ACDS_VERSION := 17.0
# This following BUILD_NUMBER comment indicates the build number of the tool
# used to generate this makefile.
# BUILD_NUMBER: 595
# Optimize for simulation
SIM_OPTIMIZE ?= 0
# The CPU reset address as needed by elf2flash
RESET_ADDRESS ?= 0x00810000
# The specific Nios II ELF file format to use.
NIOS2_ELF_FORMAT ?= elf32-littlenios2
#-------------------------------------
# Pre-Initialized Memory Descriptions
#-------------------------------------
# Memory: epcq_controller_0
MEM_0 := epcq_controller_0
$(MEM_0)_NAME := epcq_controller_0
HEX_FILES += $(MEM_INIT_DIR)/$(MEM_0).hex
MEM_INIT_INSTALL_FILES += $(MEM_INIT_INSTALL_DIR)/$(MEM_0).hex
$(MEM_0)_START := 0x00000000
$(MEM_0)_END := 0x007fffff
$(MEM_0)_SPAN := 0x00800000
$(MEM_0)_HIERARCHICAL_PATH := epcq_controller_0
$(MEM_0)_WIDTH := 32
$(MEM_0)_HEX_DATA_WIDTH := 8
$(MEM_0)_ENDIANNESS := --little-endian-mem
$(MEM_0)_CREATE_LANES := 0
$(MEM_0)_CFI_FLAGS := --base=$($(MEM_0)_START) --end=$($(MEM_0)_END) --reset=$(RESET_ADDRESS)
.PHONY: epcq_controller_0
epcq_controller_0: check_elf_exists $(MEM_INIT_DIR)/$(MEM_0).hex
# Memory: onchip_memory2_0
MEM_1 := sys_onchip_memory2_0
$(MEM_1)_NAME := onchip_memory2_0
$(MEM_1)_MEM_INIT_FILE_PARAM_NAME := INIT_FILE
HEX_FILES += $(MEM_INIT_DIR)/$(MEM_1).hex
MEM_INIT_INSTALL_FILES += $(MEM_INIT_INSTALL_DIR)/$(MEM_1).hex
DAT_FILES += $(HDL_SIM_DIR)/$(MEM_1).dat
HDL_SIM_INSTALL_FILES += $(HDL_SIM_INSTALL_DIR)/$(MEM_1).dat
SYM_FILES += $(HDL_SIM_DIR)/$(MEM_1).sym
HDL_SIM_INSTALL_FILES += $(HDL_SIM_INSTALL_DIR)/$(MEM_1).sym
$(MEM_1)_START := 0x00810000
$(MEM_1)_END := 0x00819fff
$(MEM_1)_SPAN := 0x0000a000
$(MEM_1)_HIERARCHICAL_PATH := onchip_memory2_0
$(MEM_1)_WIDTH := 32
$(MEM_1)_HEX_DATA_WIDTH := 32
$(MEM_1)_ENDIANNESS := --little-endian-mem
$(MEM_1)_CREATE_LANES := 0
.PHONY: onchip_memory2_0
onchip_memory2_0: check_elf_exists $(MEM_INIT_DIR)/$(MEM_1).hex $(HDL_SIM_DIR)/$(MEM_1).dat $(HDL_SIM_DIR)/$(MEM_1).sym
#END OF BSP SPECIFIC
#-------------------------------------
# Pre-Initialized Memory Targets
#-------------------------------------
.PHONY: mem_init_install mem_init_generate mem_init_clean
ifeq ($(QSYS),1)
# Target mem_init_install is deprecated for QSys based systems
# To initialize onchip memories for Quartus II Synthesis with Qsys based systems:
# 1) Use "make mem_init_genearate"
# 2) Add the generated mem_init/meminit.qip file to your Quartus II Project
#
mem_init_install:
$(error Deprecated Makefile Target: '$@'. Use target 'mem_init_generate' and then add $(MEM_INIT_QIP_FILE) to your Quartus II Project)
else # QSYS != 1, if SopcBuilder based system
ifneq ($(MEM_INIT_INSTALL_DIR),)
mem_init_install: $(MEM_INIT_INSTALL_FILES)
endif
ifneq ($(HDL_SIM_INSTALL_DIR),)
mem_init_install: $(HDL_SIM_INSTALL_FILES)
endif
mem_init_install: mem_init_generate
ifeq ($(MEM_INIT_INSTALL_DIR),)
@echo "WARNING: MEM_INIT_INSTALL_DIR not set. Set your QUARTUS_PROJECT_DIR environment variable."
endif
ifeq ($(HDL_SIM_INSTALL_DIR),)
@echo "WARNING: HDL_SIM_INSTALL_DIR not set. Set your QUARTUS_PROJECT_DIR and SOPC_NAME environment variable."
endif
$(MEM_INIT_INSTALL_FILES): $(MEM_INIT_INSTALL_DIR)/%: $(MEM_INIT_DIR)/%
@$(MKDIR) $(@D)
@$(CP) -v $< $@
$(HDL_SIM_INSTALL_FILES): $(HDL_SIM_INSTALL_DIR)/%: $(HDL_SIM_DIR)/%
@$(MKDIR) $(@D)
@$(CP) -v $< $@
endif # QSYS == 1
mem_init_generate: hex dat sym flash $(MEM_INIT_DESCRIPTOR_FILE) $(MEM_INIT_QIP_FILE)
mem_init_clean:
@$(RM) -r $(MEM_INIT_DIR) $(HDL_SIM_DIR) $(FLASH_FILES)
.PHONY: hex dat sym flash
hex: check_elf_exists $(HEX_FILES)
dat: check_elf_exists $(DAT_FILES)
sym: check_elf_exists $(SYM_FILES)
flash: check_elf_exists $(FLASH_FILES)
#-------------------------------------
# Pre-Initialized Memory Rules
#-------------------------------------
.PHONY: check_elf_exists
check_elf_exists: $(ELF)
ifeq ($(ELF),)
$(error ELF var not set in mem_init.mk)
endif
$(filter-out $(FLASH_DAT_FILES),$(DAT_FILES)): %.dat: $(ELF)
$(post-process-info)
@$(MKDIR) $(@D)
$(ELF2DAT) --infile=$< --outfile=$@ \
--base=$(mem_start_address) --end=$(mem_end_address) --width=$(mem_width) \
$(mem_endianness) --create-lanes=$(mem_create_lanes) $(elf2dat_extra_args)
$(foreach i,0 1 2 3 4 5 6 7,%_lane$(i).dat): %.dat
@true
ELF_TO_HEX_CMD_NO_BOOTLOADER = $(ELF2HEX) $< $(mem_start_address) $(mem_end_address) --width=$(mem_hex_width) \
$(mem_endianness) --create-lanes=$(mem_create_lanes) $(elf2hex_extra_args) $@
ELF_TO_HEX_CMD_WITH_BOOTLOADER = $(ALT_FILE_CONVERT) -I $(NIOS2_ELF_FORMAT) -O hex --input=$< --output=$@ \
--base=$(mem_start_address) --end=$(mem_end_address) --reset=$(RESET_ADDRESS) \
--out-data-width=$(mem_hex_width) $(flash_mem_boot_loader_flag)
ELF_TO_HEX_CMD = $(strip $(if $(flash_mem_boot_loader_flag), \
$(ELF_TO_HEX_CMD_WITH_BOOTLOADER), \
$(ELF_TO_HEX_CMD_NO_BOOTLOADER) \
))
$(HEX_FILES): %.hex: $(ELF)
$(post-process-info)
@$(MKDIR) $(@D)
$(ELF_TO_HEX_CMD)
$(SYM_FILES): %.sym: $(ELF)
$(post-process-info)
@$(MKDIR) $(@D)
$(NM) -n $< > $@
$(FLASH_FILES): %.flash: $(ELF)
$(post-process-info)
@$(MKDIR) $(@D)
$(ELF2FLASH) --input=$< --outfile=$@ --sim_optimize=$(SIM_OPTIMIZE) $(mem_endianness) \
$(elf2flash_extra_args)
#
# Function generate_spd_entry
# Arg1: path to the memory initialization file
# Arg2: Type HEX or DAT
# Arg3: Output spd file to append
gen_spd_entry.BASE_FILE = $(basename $(notdir $1))
gen_spd_entry.PARAM_NAME = $($(gen_spd_entry.BASE_FILE)_MEM_INIT_FILE_PARAM_NAME)
gen_spd_entry.MEM_PATH = $($(gen_spd_entry.BASE_FILE)_HIERARCHICAL_PATH)
gen_spd_entry.SETTINGS = $(strip \
path=\"$1\" \
type=\"$2\" \
$(if $(gen_spd_entry.PARAM_NAME),initParamName=\"$(gen_spd_entry.PARAM_NAME)\") \
$(if $(gen_spd_entry.MEM_PATH),memoryPath=\"$(gen_spd_entry.MEM_PATH)\") \
)
define gen_spd_entry
$(ECHO) "<file $(gen_spd_entry.SETTINGS) />" >> $3
endef
$(MEM_INIT_DESCRIPTOR_FILE).DAT_FILESET := $(patsubst $(dir $(MEM_INIT_DESCRIPTOR_FILE))%,%,$(DAT_FILES))
$(MEM_INIT_DESCRIPTOR_FILE).HEX_FILESET := $(patsubst $(dir $(MEM_INIT_DESCRIPTOR_FILE))%,%,$(HEX_FILES))
$(MEM_INIT_DESCRIPTOR_FILE): %.spd: $(MEM_INIT_FILE)
$(post-process-info)
@$(MKDIR) $(@D)
@$(RM) $@
@$(ECHO) "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $@
@$(ECHO) "<simPackage>" >> $@
@$(foreach dat_file,$($@.DAT_FILESET),$(call gen_spd_entry,$(dat_file),DAT,$@) &&)true
@$(foreach hex_file,$($@.HEX_FILESET),$(call gen_spd_entry,$(hex_file),HEX,$@) &&)true
@$(ECHO) "</simPackage>" >> $@
.DELETE_ON_ERROR: $(MEM_INIT_DESCRIPTOR_FILE)
$(MEM_INIT_QIP_FILE): %.qip: $(MEM_INIT_FILE)
$(post-process-info)
@$(MKDIR) $(@D)
@$(RM) $@
@$(ECHO) "set_global_assignment -name SEARCH_PATH $$::quartus(qip_path)" > $@
.DELETE_ON_ERROR: $(MEM_INIT_QIP_FILE)
Reference in New Issue View Git Blame Copy Permalink