Correct JRC6355E implementation to agree with NJU6355 datasheet

RTC writes and reads in feversoc both fully work now.

src/devices/machine/rtc4543.cpp

@@ -8,6 +8,10 @@
     JRC 6355E / NJU6355E is basically similar, but order of registers
     is reversed and readouts happen on falling CLK edge.
 
+    The clock's seven registers are read out as 52 consecutive bits of
+    data, with the middle register being only 4 bits wide. The bits
+    are numbered 0-27 and 32-55 here for implementation convenience.
+
 **********************************************************************/
 
 #include "rtc4543.h"
@@ -122,6 +126,7 @@ void rtc4543_device::rtc_clock_updated(int year, int month, int day, int day_of_
 	m_regs[6] = convert_to_bcd(year % 100);                 // year (BCD, 0-99)
 }
 
+
 //-------------------------------------------------
 //  ce_w - chip enable write
 //-------------------------------------------------
@@ -131,12 +136,12 @@ WRITE_LINE_MEMBER( rtc4543_device::ce_w )
 	if (!state && m_ce) // complete transfer
 	{
 		if (VERBOSE) logerror("CE falling edge\n", state);
+		ce_falling();
 	}
 	else if (state && !m_ce) // start new data transfer
 	{
 		if (VERBOSE) logerror("CE rising edge\n", state);
-
+		ce_rising();
-		m_curbit = 0; // force immediate reload of output data
 	}
 
 	m_ce = state;
@@ -145,6 +150,26 @@ WRITE_LINE_MEMBER( rtc4543_device::ce_w )
 	m_clock_timer->enable(!m_ce || !m_wr);
 }
 
+
+//-------------------------------------------------
+//  ce_rising - CE rising edge trigger
+//-------------------------------------------------
+
+void rtc4543_device::ce_rising()
+{
+	m_curbit = 0; // force immediate reload of output data
+}
+
+
+//-------------------------------------------------
+//  ce_falling - CE falling edge trigger
+//-------------------------------------------------
+
+void rtc4543_device::ce_falling()
+{
+}
+
+
 //-------------------------------------------------
 //  wr_w - data direction line write
 //-------------------------------------------------
@@ -157,6 +182,7 @@ WRITE_LINE_MEMBER( rtc4543_device::wr_w )
 	m_wr = state;
 }
 
+
 //-------------------------------------------------
 //  clk_w - serial clock write
 //-------------------------------------------------
@@ -199,6 +225,10 @@ void rtc4543_device::clk_rising()
 		store_bit(m_curbit / 8);
 
 	advance_bit();
+
+	// update only occurs when a write goes all the way through
+	if (m_wr && m_curbit == 56)
+		update_effective();
 }
 
 
@@ -291,9 +321,17 @@ void rtc4543_device::advance_bit()
 		// skip 4 bits, Brother Maynard
 		m_curbit += 4;
 	}
+}
 
-	// update only occurs when a write goes all the way through
+
-	if (m_wr && m_curbit == 56)
+//-------------------------------------------------
+//  update_effective - update the RTC
+//-------------------------------------------------
+
+void rtc4543_device::update_effective()
+{
+	if (VERBOSE)
+		logerror("RTC updated: %02x.%02x.%02x (%01x) %02x:%02x:%02x\n", m_regs[6], m_regs[5], m_regs[4], m_regs[3], m_regs[2], m_regs[1], m_regs[0]);
 	set_time(false,
 		bcd_to_integer(m_regs[6]),      // year
 		bcd_to_integer(m_regs[5]),      // month
@@ -323,6 +361,34 @@ jrc6355e_device::jrc6355e_device(const machine_config &mconfig, const char *tag,
 }
 
 
+//-------------------------------------------------
+//  ce_rising - CE rising edge trigger
+//-------------------------------------------------
+
+void jrc6355e_device::ce_rising()
+{
+	m_curbit = 0; // force immediate reload of output data
+	load_bit(6);
+}
+
+
+
+//-------------------------------------------------
+//  ce_falling - CE falling edge trigger
+//-------------------------------------------------
+
+void jrc6355e_device::ce_falling()
+{
+	// update occurs on falling edge of CE after minutes are written
+	if (m_wr && m_curbit >= 48)
+	{
+		// seconds are zeroed
+		m_regs[0] = 0;
+		update_effective();
+	}
+}
+
+
 //-------------------------------------------------
 //  clk_rising - CLK rising edge trigger
 //-------------------------------------------------
@@ -334,8 +400,6 @@ void jrc6355e_device::clk_rising()
 
 	if (m_wr)
 		store_bit(6 - (m_curbit / 8));
-
-	advance_bit();
 }
 
 
@@ -348,6 +412,8 @@ void jrc6355e_device::clk_falling()
 	if (m_curbit == 56)
 		return;
 
-	if (!m_wr)
+	advance_bit();
+
+	if (!m_wr && m_curbit != 56)
 		load_bit(6 - (m_curbit / 8));
 }

src/devices/machine/rtc4543.h

@@ -66,11 +66,14 @@ protected:
 	virtual bool rtc_feature_leap_year() override { return true; }
 
 	// helpers
+	virtual void ce_rising();
+	virtual void ce_falling();
 	virtual void clk_rising();
 	virtual void clk_falling();
 	void load_bit(int reg);
 	void store_bit(int reg);
 	void advance_bit();
+	void update_effective();
 
 	devcb_write_line data_cb;
 
@@ -97,6 +100,8 @@ public:
 
 protected:
 	// rtc4543 overrides
+	virtual void ce_rising() override;
+	virtual void ce_falling() override;
 	virtual void clk_rising() override;
 	virtual void clk_falling() override;
 };

src/mame/drivers/feversoc.cpp

@@ -9,7 +9,6 @@ A down-grade of the Seibu SPI Hardware with SH-2 as main cpu.
 driver by Angelo Salese & Nicola Salmoria
 
 TODO:
-- Make RTC writes actually go through (SH2 interrupt/timing issue?)
 - Determine what buttons 5-7 actually do
 - Find out where the NVRAM maps to
 - Layout including lamps