Sprinter/mame
2
0
Fork 0
mirror of https://github.com/holub/mame synced 2025-10-07 01:16:22 +03:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

(MESS) pasogo.c: Added readme. [Guru]

Browse Source 
Out of whatsnew:
I only fixed the cpu main clock. Changing the 80188 to V30 also requires redoing the address maps.
This commit is contained in:
Wilbert Pol 2013-05-26 10:25:12 +00:00
parent adb8846f1f
commit 1d72cbae42
1 changed files with 90 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

94
src/mess/drivers/pasogo.c
View File

@ -1,9 +1,95 @@
/******************************************************************************
Pasogo Handheld Console
Koei 1996
This is a handheld console made by Koei in 1996. All of the games available on
this console are variations of the game 'Go'
Main PCB Layout
---------------
PT-GMAIN01D
|--------------|------------||
|POWER VOL | ||
| LM2937*| CART ||
|CE-0702 | SLOT ||
| | CN1 ||
| |MC14071B* ||
| | ||
| PIEZO_SPKR |------------||
|CN5 74HC04* |
| X2 |
| |-------| CN4|
| |VAGEM | |
| |VG230 | |
| | | HM514800* |
| | | CN3|
| |-------| HM514800* |
|CN2* X1 |
|----------------------------|
Notes: (all ICs shown)
VG230 - Vagem VG230 single-chip PC platform. Contains 16 MHz NEC uPD70116H V30HL CPU
(which is a high-speed low-power 8086 variation), IBM PC/XT-compatible core
logic, LCD controller (CGA/AT&T640x400), keyboard matrix scanner, dual PCMCIA
2.1 card controller, EMS 4.0 hardware support for up to 64MB, built-in timer
PIC/DMA/UART/RTC controllers. The clock input is 32.2200MHz. An internal divider
creates a 16.11MHz clock for the V30HL CPU.
HM514800 - Hitachi HM514800 512k x8-bit DRAM
MC14071 - Motorola MC14071 Quad 2-input OR gate
74HC04 - 74HC04 Hex inverter
LM2937 - Texas Instruments LM2937ES-5 voltage regulator (Max 26V input, 5V output at 500mA)
CE-0702 - TDK CE-0702 DC-DC converter for LCD in SIP9 package (5V input, -24V output at 25mA)
POWER - 9V DC power input from AC/DC adapter
VOL - Volume pot
CN5 - 5 pin connector for 4-way control pad (up/down/left/right/ground)
CN4 - 5 pin connector for on/off switch and 2 buttons
CN3 - 2 pin power input from 6x AA-battery compartment (input voltage is 9V DC)
CN2 - Flat cable connector for video out to LCD panel. When the LCD is powered on the pixels
are blue. The LCD panel PCB has part number 97-44264-8 LMG6912RPFC LMG6910RPGR
and contains the following parts.....
Matsushita 53008HEB-8
Sanyo LA6324N quad operational amplifier
Hitachi BD66285BFC LCD controller IC (x3)
Hitachi BD66284BFC LCD controller IC (x4)
The LCD flat cable has several wires but 2 of them have frequencies which measure
69.9161Hz and 16.7798kHz. These are assumed to be VSync and HSync
CN1 - Cart slot
X1 - Marked 322. Measures 32.21732MHz so this is a common 32.22MHz OSC.
X2 - No markings. Measures 32.768kHz and used for the RTC
* - These parts are on the other side of the PCB
Carts
-----
All of the carts are identical. Most have only one surface mounted mask ROM. Either a
MX23C8100 (8M) or YRM0442 (4M). Some are populated with additional parts including a 62256
32kx8 SRAM, a 3v coin battery and a MM1081N reset chip plus a few resistors/capacitors and
a transistor. All parts are surface mounted.
PT-GMEM01B
PT-GMEM01C
|---------------|
|-- CR2016 |
|-- MM1081 |
|-- |
|-- |
|-- 62256 |
|-- |
|-- |
|-- MX23C8100|
|-- or YRM0442 |
|---------------|
Notes:
Carts containing just one mask ROM are KS-1002, KS-1003, KS1004 and KS-1009
Carts containing RAM, battery and reset chip are KS-1001 and KS1010
Carts KS-1005, KS-1006, KS-1007 and KS-1008 probably exist but are unknown.
===========================================================================================
PeT mess@utanet.at march 2008
vadem vg230 (single chip pc) based handheld
although it is very related to standard pc hardware, it is different enough
to make the standard pc driver one level more complex, so own driver
@ -498,7 +584,7 @@ WRITE_LINE_MEMBER(pasogo_state::pasogo_pic8259_set_int_line)
static MACHINE_CONFIG_START( pasogo, pasogo_state )
MCFG_CPU_ADD("maincpu", I80188/*V30HL in vadem vg230*/, 10000000/*?*/)
MCFG_CPU_ADD("maincpu", I80188/*V30HL in vadem vg230*/, XTAL_32_22MHz/2)
MCFG_CPU_PROGRAM_MAP(pasogo_mem)
MCFG_CPU_IO_MAP( pasogo_io)
MCFG_CPU_VBLANK_INT_DRIVER("screen", pasogo_state, pasogo_interrupt)