mirror of
https://github.com/holub/mame
synced 2025-04-19 23:12:11 +03:00
New clones marked as NOT_WORKING
-------------------------------- Husky Hunter [Nigel Barnes, Phill Harvey-Smith] hunter2: Added appropriate RAM size options, and minor keyboard corrections. [Nigel Barnes]
This commit is contained in:
Nigel Barnes
parent
83e181a921
commit
1fb9976d81
@ -2,15 +2,22 @@
|
||||
// copyright-holders:Robbbert,Barry Rodewald
|
||||
/***************************************************************************
|
||||
|
||||
Skeleton driver for Husky Hunter 2
|
||||
|
||||
2014-03-06 Skeleton [Robbbert]
|
||||
2014-03-07 Fixed screen [Barry Rodewald]
|
||||
2014-03-07 Added more stuff [Robbbert]
|
||||
Husky Hunter, Hunter 2
|
||||
|
||||
http://www.seasip.info/VintagePC/husky2.html
|
||||
|
||||
No schematics or manuals available.
|
||||
The main hardware difference between the original Hunter and Hunter 2 is
|
||||
the LCD panel, in the Hunter 2 it is physically larger. It is also driven
|
||||
differently. The Hunter sets up the HD61830 number of time divisions to
|
||||
be 32 and uses both address counters RAC1/RAC2, whereas the Hunter 2 sets
|
||||
number of time divisions to 64 and only uses RAC1 to address the upper half
|
||||
of the screen.
|
||||
Early models would use all 6 ROM sockets to provide 48K ROM (6 x 2764),
|
||||
whereas later models would populate 2 sockets with 2 x 32K ROM (TC57256),
|
||||
though only 48K of this is ever paged in.
|
||||
|
||||
Usage:
|
||||
The RAMdisk must first be formatted using 'format'.
|
||||
|
||||
TODO:
|
||||
- Add ports 83 and 85
|
||||
@ -23,9 +30,9 @@
|
||||
#include "emu.h"
|
||||
#include "bus/rs232/rs232.h"
|
||||
#include "cpu/z80/z80.h"
|
||||
#include "machine/bankdev.h"
|
||||
#include "machine/mm58274c.h"
|
||||
#include "machine/nsc810.h"
|
||||
#include "machine/ram.h"
|
||||
#include "machine/nvram.h"
|
||||
#include "sound/spkrdev.h"
|
||||
#include "video/hd61830.h"
|
||||
@ -41,16 +48,19 @@ public:
|
||||
: driver_device(mconfig, type, tag)
|
||||
, m_maincpu(*this, "maincpu")
|
||||
, m_speaker(*this, "speaker")
|
||||
, m_kbd(*this, "X%u", 0)
|
||||
, m_rs232(*this, "serial")
|
||||
, m_rom(*this, "roms")
|
||||
, m_ram(*this, "rams")
|
||||
, m_rom(*this, "rom")
|
||||
, m_ram(*this, RAM_TAG)
|
||||
, m_nvram(*this, "nvram")
|
||||
, m_bank1(*this, "bank1")
|
||||
, m_bank2(*this, "bank2")
|
||||
, m_bank3(*this, "bank3")
|
||||
, m_battery(*this, "BATTERY")
|
||||
{ }
|
||||
|
||||
void hunter2(machine_config &config);
|
||||
void hunter(machine_config &config);
|
||||
|
||||
void init_hunter2();
|
||||
|
||||
@ -59,11 +69,10 @@ protected:
|
||||
|
||||
private:
|
||||
DECLARE_READ8_MEMBER(keyboard_r);
|
||||
DECLARE_READ8_MEMBER(serial_dsr_r);
|
||||
DECLARE_READ8_MEMBER(portb_r);
|
||||
DECLARE_WRITE8_MEMBER(keyboard_w);
|
||||
DECLARE_READ8_MEMBER(serial_rx_r);
|
||||
DECLARE_READ8_MEMBER(portc_r);
|
||||
DECLARE_WRITE8_MEMBER(display_ctrl_w);
|
||||
DECLARE_WRITE8_MEMBER(port80_w);
|
||||
DECLARE_WRITE8_MEMBER(serial_tx_w);
|
||||
DECLARE_WRITE8_MEMBER(serial_dtr_w);
|
||||
DECLARE_WRITE8_MEMBER(serial_rts_w);
|
||||
@ -77,7 +86,6 @@ private:
|
||||
DECLARE_WRITE_LINE_MEMBER(cts_w);
|
||||
DECLARE_WRITE_LINE_MEMBER(rxd_w);
|
||||
|
||||
void hunter2_banked_mem(address_map &map);
|
||||
void hunter2_io(address_map &map);
|
||||
void hunter2_mem(address_map &map);
|
||||
|
||||
@ -85,29 +93,22 @@ private:
|
||||
uint8_t m_irq_mask;
|
||||
required_device<cpu_device> m_maincpu;
|
||||
required_device<speaker_sound_device> m_speaker;
|
||||
required_ioport_array<7> m_kbd;
|
||||
required_device<rs232_port_device> m_rs232;
|
||||
required_memory_region m_rom;
|
||||
required_memory_region m_ram;
|
||||
required_device<ram_device> m_ram;
|
||||
required_device<nvram_device> m_nvram;
|
||||
required_device<address_map_bank_device> m_bank1;
|
||||
required_device<address_map_bank_device> m_bank2;
|
||||
required_device<address_map_bank_device> m_bank3;
|
||||
required_memory_bank m_bank1;
|
||||
required_memory_bank m_bank2;
|
||||
required_memory_bank m_bank3;
|
||||
required_ioport m_battery;
|
||||
};
|
||||
|
||||
void hunter2_state::hunter2_banked_mem(address_map &map)
|
||||
{
|
||||
map(0x00000, 0x2ffff).rom().region("roms", 0x0000);
|
||||
map(0x30000, 0x3ffff).noprw();
|
||||
map(0x40000, 0xfffff).ram().region("rams", 0x0000);
|
||||
}
|
||||
|
||||
void hunter2_state::hunter2_mem(address_map &map)
|
||||
{
|
||||
map.unmap_value_high();
|
||||
map(0x0000, 0x3fff).rw(m_bank1, FUNC(address_map_bank_device::read8), FUNC(address_map_bank_device::write8));
|
||||
map(0x4000, 0x7fff).rw(m_bank2, FUNC(address_map_bank_device::read8), FUNC(address_map_bank_device::write8));
|
||||
map(0x8000, 0xbfff).rw(m_bank3, FUNC(address_map_bank_device::read8), FUNC(address_map_bank_device::write8));
|
||||
map(0xc000, 0xffff).ram();
|
||||
map(0x0000, 0x7fff).bankr("bank1");
|
||||
map(0x8000, 0xbfff).bankr("bank2");
|
||||
map(0xc000, 0xffff).bankrw("bank3");
|
||||
}
|
||||
|
||||
void hunter2_state::hunter2_io(address_map &map)
|
||||
@ -118,13 +119,16 @@ void hunter2_state::hunter2_io(address_map &map)
|
||||
map(0x20, 0x20).w("lcdc", FUNC(hd61830_device::data_w));
|
||||
map(0x21, 0x21).rw("lcdc", FUNC(hd61830_device::status_r), FUNC(hd61830_device::control_w));
|
||||
map(0x3e, 0x3e).r("lcdc", FUNC(hd61830_device::data_r));
|
||||
map(0x40, 0x4f).rw("rtc", FUNC(mm58274c_device::read), FUNC(mm58274c_device::write));
|
||||
map(0x60, 0x60).w(FUNC(hunter2_state::display_ctrl_w));
|
||||
map(0x80, 0x80).w(FUNC(hunter2_state::port80_w));
|
||||
map(0x81, 0x81).w(FUNC(hunter2_state::serial_tx_w));
|
||||
map(0x82, 0x82).w(FUNC(hunter2_state::serial_dtr_w));
|
||||
map(0x84, 0x84).w(FUNC(hunter2_state::serial_rts_w));
|
||||
map(0x86, 0x86).w(FUNC(hunter2_state::speaker_w));
|
||||
map(0x40, 0x4f).mirror(0x10).rw("rtc", FUNC(mm58274c_device::read), FUNC(mm58274c_device::write));
|
||||
map(0x60, 0x60).mirror(0x1f).w(FUNC(hunter2_state::display_ctrl_w));
|
||||
map(0x80, 0x80).mirror(0x18).noprw(); /* POWSAV - Power save control */
|
||||
map(0x81, 0x81).mirror(0x18).w(FUNC(hunter2_state::serial_tx_w));
|
||||
map(0x82, 0x82).mirror(0x18).w(FUNC(hunter2_state::serial_rts_w));
|
||||
map(0x83, 0x83).mirror(0x18).noprw(); /* POWHLD - Power control */
|
||||
map(0x84, 0x84).mirror(0x18).noprw(); /* INVCON - V24 inverter control */
|
||||
map(0x85, 0x85).mirror(0x18).w(FUNC(hunter2_state::serial_dtr_w));
|
||||
map(0x86, 0x86).mirror(0x18).w(FUNC(hunter2_state::speaker_w));
|
||||
map(0x87, 0x87).mirror(0x18).noprw(); /* AUXPWR - Turns on the auxiliary power */
|
||||
map(0xbb, 0xbb).w(FUNC(hunter2_state::irqctrl_w));
|
||||
map(0xe0, 0xe0).w(FUNC(hunter2_state::memmap_w));
|
||||
}
|
||||
@ -143,7 +147,7 @@ static INPUT_PORTS_START( hunter2 )
|
||||
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_V) PORT_CHAR('V') PORT_CHAR('v')
|
||||
|
||||
PORT_START("X1")
|
||||
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('(')
|
||||
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('*')
|
||||
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('&')
|
||||
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_I) PORT_CHAR('I') PORT_CHAR('i')
|
||||
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_U) PORT_CHAR('U') PORT_CHAR('u')
|
||||
@ -153,8 +157,8 @@ static INPUT_PORTS_START( hunter2 )
|
||||
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_N) PORT_CHAR('N') PORT_CHAR('n')
|
||||
|
||||
PORT_START("X2")
|
||||
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_0) PORT_CHAR('0')
|
||||
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR(')')
|
||||
PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_CHAR(')')
|
||||
PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR('(')
|
||||
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_P) PORT_CHAR('P') PORT_CHAR('p')
|
||||
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_O) PORT_CHAR('O') PORT_CHAR('o')
|
||||
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_L) PORT_CHAR('L') PORT_CHAR('l')
|
||||
@ -179,7 +183,7 @@ static INPUT_PORTS_START( hunter2 )
|
||||
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('[') PORT_CHAR(']')
|
||||
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_QUOTE) PORT_CHAR('\'') PORT_CHAR('\"')
|
||||
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_COLON) PORT_CHAR(';') PORT_CHAR(':')
|
||||
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_SLASH) PORT_CHAR('?') PORT_CHAR('/')
|
||||
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_SLASH) PORT_CHAR('/') PORT_CHAR('?')
|
||||
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR('>')
|
||||
|
||||
PORT_START("X5")
|
||||
@ -188,7 +192,7 @@ static INPUT_PORTS_START( hunter2 )
|
||||
PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_W) PORT_CHAR('W') PORT_CHAR('w')
|
||||
PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_Q) PORT_CHAR('Q') PORT_CHAR('q')
|
||||
PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_A) PORT_CHAR('A') PORT_CHAR('a')
|
||||
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Ctrl") PORT_CODE(KEYCODE_LCONTROL) PORT_CODE(KEYCODE_RCONTROL)
|
||||
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Ctl/Fn") PORT_CODE(KEYCODE_LCONTROL) PORT_CODE(KEYCODE_RCONTROL)
|
||||
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_Z) PORT_CHAR('Z') PORT_CHAR('z')
|
||||
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Shift") PORT_CODE(KEYCODE_LSHIFT) PORT_CODE(KEYCODE_RSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
|
||||
|
||||
@ -201,24 +205,27 @@ static INPUT_PORTS_START( hunter2 )
|
||||
PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_S) PORT_CHAR('S') PORT_CHAR('s')
|
||||
PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_C) PORT_CHAR('C') PORT_CHAR('c')
|
||||
PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_X) PORT_CHAR('X') PORT_CHAR('x')
|
||||
|
||||
PORT_START("BATTERY")
|
||||
PORT_CONFNAME(0x04, 0x00, "Battery")
|
||||
PORT_CONFSETTING(0x00, "OK")
|
||||
PORT_CONFSETTING(0x04, "Low")
|
||||
INPUT_PORTS_END
|
||||
|
||||
READ8_MEMBER( hunter2_state::keyboard_r )
|
||||
{
|
||||
uint8_t i,data = 0xff;
|
||||
for (i = 0; i < 7; i++)
|
||||
uint8_t data = 0xff;
|
||||
for (int i = 0; i < 7; i++)
|
||||
{
|
||||
if (!BIT(m_keydata, i))
|
||||
{
|
||||
char kbdrow[6];
|
||||
sprintf(kbdrow,"X%d", i);
|
||||
data &= ioport(kbdrow)->read();
|
||||
data &= m_kbd[i]->read();
|
||||
}
|
||||
}
|
||||
return data;
|
||||
}
|
||||
|
||||
READ8_MEMBER( hunter2_state::serial_dsr_r )
|
||||
READ8_MEMBER( hunter2_state::portb_r )
|
||||
{
|
||||
uint8_t res = 0x00;
|
||||
|
||||
@ -231,10 +238,16 @@ READ8_MEMBER( hunter2_state::serial_dsr_r )
|
||||
WRITE8_MEMBER( hunter2_state::keyboard_w )
|
||||
{
|
||||
m_keydata = data;
|
||||
//logerror("Key row select %02x\n",data);
|
||||
}
|
||||
|
||||
READ8_MEMBER( hunter2_state::serial_rx_r )
|
||||
/*
|
||||
INPUTS - This port has a number of input functions:
|
||||
Bit 0 = Data in (inverted from RS-232 line)
|
||||
Bit 1 = DCD (inverted from RS-232 line)
|
||||
Bit 2 = Power low warning (0 = Power OK, 1 = Power low)
|
||||
Bit 3 = TXCLK (inverted from RS-232 line)
|
||||
*/
|
||||
READ8_MEMBER( hunter2_state::portc_r )
|
||||
{
|
||||
uint8_t res = 0x28;
|
||||
|
||||
@ -242,10 +255,14 @@ READ8_MEMBER( hunter2_state::serial_rx_r )
|
||||
res |= 0x01;
|
||||
if(m_rs232->dcd_r())
|
||||
res |= 0x02;
|
||||
res |= m_battery->read();
|
||||
|
||||
return res;
|
||||
}
|
||||
|
||||
/*
|
||||
ANGLE - Controls display viewing angle. Input value in the range 0-0x1F.
|
||||
*/
|
||||
WRITE8_MEMBER( hunter2_state::display_ctrl_w )
|
||||
{
|
||||
/* according to the website,
|
||||
@ -255,26 +272,29 @@ Bits 1,0,7,6: Contrast level.
|
||||
*/
|
||||
}
|
||||
|
||||
WRITE8_MEMBER( hunter2_state::port80_w )
|
||||
{
|
||||
}
|
||||
|
||||
/*
|
||||
V24OUT - Directly outputs to the V24 data line signal on bit 0.
|
||||
The output is voltage inverted ie. 0 = +ve, 1 = -ve
|
||||
*/
|
||||
WRITE8_MEMBER( hunter2_state::serial_tx_w )
|
||||
{
|
||||
m_rs232->write_txd(data & 0x01);
|
||||
// logerror("TXD write %02x\n",data);
|
||||
}
|
||||
|
||||
/*
|
||||
DTR output bit
|
||||
*/
|
||||
WRITE8_MEMBER( hunter2_state::serial_dtr_w )
|
||||
{
|
||||
m_rs232->write_dtr(data & 0x01);
|
||||
// logerror("DTR write %02x\n",data);
|
||||
}
|
||||
|
||||
/*
|
||||
RTS output bit
|
||||
*/
|
||||
WRITE8_MEMBER( hunter2_state::serial_rts_w )
|
||||
{
|
||||
m_rs232->write_rts(data & 0x01);
|
||||
// logerror("RTS write %02x\n",data);
|
||||
}
|
||||
|
||||
WRITE8_MEMBER( hunter2_state::speaker_w )
|
||||
@ -283,6 +303,7 @@ WRITE8_MEMBER( hunter2_state::speaker_w )
|
||||
}
|
||||
|
||||
/*
|
||||
ICRREG - NSC800 internal interrupt mask register
|
||||
Bit 0 = Enable normal interrupts
|
||||
Bit 1 = Enable RSTC interrupts
|
||||
Bit 2 = Enable RSTB interrupts
|
||||
@ -300,31 +321,41 @@ WRITE8_MEMBER( hunter2_state::irqctrl_w )
|
||||
}
|
||||
|
||||
/*
|
||||
data bank0 bank1 bank2
|
||||
00 00 01 02
|
||||
01 00 01 03
|
||||
02 00 01 04
|
||||
....
|
||||
09 00 01 11
|
||||
80 16 17 18
|
||||
....
|
||||
8F 61 62 63
|
||||
PAGE - Memory paging register
|
||||
*/
|
||||
WRITE8_MEMBER( hunter2_state::memmap_w )
|
||||
{
|
||||
if (data < 0x0a)
|
||||
address_space &prog_space = m_maincpu->space(AS_PROGRAM);
|
||||
uint8_t bank = data & 0x0f;
|
||||
|
||||
switch (BIT(data, 7))
|
||||
{
|
||||
m_bank1->set_bank(0);
|
||||
m_bank2->set_bank(1);
|
||||
m_bank3->set_bank(2 + data);
|
||||
}
|
||||
else
|
||||
if (data >= 0x80)
|
||||
{
|
||||
uint8_t bank = data & 0x0f;
|
||||
m_bank1->set_bank(16 + (bank*3));
|
||||
m_bank2->set_bank(17 + (bank*3));
|
||||
m_bank3->set_bank(18 + (bank*3));
|
||||
case 0: /* ROM */
|
||||
prog_space.install_read_bank(0x0000, 0x7fff, m_bank1);
|
||||
m_bank1->set_base(m_rom->base());
|
||||
/* select ROM bank only if present */
|
||||
if (m_rom->bytes() > (0x8000 + (0x4000 * bank)))
|
||||
{
|
||||
prog_space.install_read_bank(0x8000, 0xbfff, m_bank2);
|
||||
m_bank2->set_base(m_rom->base() + (0x8000 + (0x4000 * bank)));
|
||||
}
|
||||
else
|
||||
{
|
||||
prog_space.unmap_readwrite(0x8000, 0xbfff);
|
||||
}
|
||||
break;
|
||||
case 1: /* RAM */
|
||||
/* select RAM bank only if present */
|
||||
if (m_ram->size() > (0x4000 + (0xc000 * bank)))
|
||||
{
|
||||
prog_space.install_readwrite_bank(0x0000, 0xbfff, m_bank1);
|
||||
m_bank1->set_base(m_ram->pointer() + (0x4000 + (0xc000 * bank)));
|
||||
}
|
||||
else
|
||||
{
|
||||
prog_space.unmap_readwrite(0x0000, 0xbfff);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
@ -332,17 +363,16 @@ void hunter2_state::machine_reset()
|
||||
{
|
||||
m_keydata = 0xff;
|
||||
m_irq_mask = 0;
|
||||
m_bank1->set_bank(0);
|
||||
m_bank2->set_bank(1);
|
||||
m_bank3->set_bank(2);
|
||||
|
||||
/* select ROM/RAM banks */
|
||||
m_bank1->set_base(m_rom->base());
|
||||
m_bank2->set_base(m_rom->base() + 0x4000);
|
||||
m_bank3->set_base(m_ram->pointer());
|
||||
}
|
||||
|
||||
// it is presumed that writing to rom will go nowhere
|
||||
void hunter2_state::init_hunter2()
|
||||
{
|
||||
uint8_t *ram = m_ram->base();
|
||||
|
||||
m_nvram->set_base(ram,m_ram->bytes());
|
||||
m_nvram->set_base(m_ram->pointer(), m_ram->size());
|
||||
}
|
||||
|
||||
void hunter2_state::hunter2_palette(palette_device &palette) const
|
||||
@ -381,7 +411,7 @@ WRITE_LINE_MEMBER(hunter2_state::rxd_w)
|
||||
void hunter2_state::hunter2(machine_config &config)
|
||||
{
|
||||
/* basic machine hardware */
|
||||
NSC800(config, m_maincpu, XTAL(4'000'000));
|
||||
NSC800(config, m_maincpu, 8_MHz_XTAL / 2);
|
||||
m_maincpu->set_addrmap(AS_PROGRAM, &hunter2_state::hunter2_mem);
|
||||
m_maincpu->set_addrmap(AS_IO, &hunter2_state::hunter2_io);
|
||||
|
||||
@ -402,16 +432,16 @@ void hunter2_state::hunter2(machine_config &config)
|
||||
SPEAKER_SOUND(config, m_speaker).add_route(ALL_OUTPUTS, "mono", 0.50);
|
||||
|
||||
/* Devices */
|
||||
mm58274c_device &rtc(MM58274C(config, "rtc", 0));
|
||||
mm58274c_device &rtc(MM58274C(config, "rtc", 32.768_kHz_XTAL));
|
||||
// this is all guess
|
||||
rtc.set_mode24(0); // 12 hour
|
||||
rtc.set_day1(1); // monday
|
||||
|
||||
nsc810_device &iotimer(NSC810(config, "iotimer", 0, XTAL(4'000'000), XTAL(4'000'000)));
|
||||
nsc810_device &iotimer(NSC810(config, "iotimer", 0, 8_MHz_XTAL / 2, 8_MHz_XTAL / 2));
|
||||
iotimer.portA_read_callback().set(FUNC(hunter2_state::keyboard_r));
|
||||
iotimer.portB_read_callback().set(FUNC(hunter2_state::serial_dsr_r));
|
||||
iotimer.portB_read_callback().set(FUNC(hunter2_state::portb_r));
|
||||
iotimer.portB_write_callback().set(FUNC(hunter2_state::keyboard_w));
|
||||
iotimer.portC_read_callback().set(FUNC(hunter2_state::serial_rx_r));
|
||||
iotimer.portC_read_callback().set(FUNC(hunter2_state::portc_r));
|
||||
iotimer.timer0_callback().set(FUNC(hunter2_state::timer0_out));
|
||||
iotimer.timer1_callback().set(FUNC(hunter2_state::timer1_out));
|
||||
|
||||
@ -419,25 +449,55 @@ void hunter2_state::hunter2(machine_config &config)
|
||||
m_rs232->cts_handler().set(FUNC(hunter2_state::cts_w));
|
||||
m_rs232->rxd_handler().set(FUNC(hunter2_state::rxd_w));
|
||||
|
||||
/* internal ram */
|
||||
RAM(config, m_ram).set_default_size("352K").set_extra_options("80K,144K,208K,496K").set_default_value(0xff);
|
||||
NVRAM(config, "nvram", nvram_device::DEFAULT_ALL_0);
|
||||
}
|
||||
|
||||
ADDRESS_MAP_BANK(config, "bank1").set_map(&hunter2_state::hunter2_banked_mem).set_endianness(ENDIANNESS_LITTLE).set_data_width(8).set_stride(0x4000);
|
||||
ADDRESS_MAP_BANK(config, "bank2").set_map(&hunter2_state::hunter2_banked_mem).set_endianness(ENDIANNESS_LITTLE).set_data_width(8).set_stride(0x4000);
|
||||
ADDRESS_MAP_BANK(config, "bank3").set_map(&hunter2_state::hunter2_banked_mem).set_endianness(ENDIANNESS_LITTLE).set_data_width(8).set_stride(0x4000);
|
||||
ADDRESS_MAP_BANK(config, "bank4").set_map(&hunter2_state::hunter2_banked_mem).set_endianness(ENDIANNESS_LITTLE).set_data_width(8).set_stride(0x4000);
|
||||
void hunter2_state::hunter(machine_config &config)
|
||||
{
|
||||
hunter2(config);
|
||||
|
||||
/* video hardware */
|
||||
screen_device &screen(*subdevice<screen_device>("screen"));
|
||||
screen.set_size(240, 64);
|
||||
screen.set_visarea(0, 239, 0, 63);
|
||||
}
|
||||
|
||||
/* ROM definition */
|
||||
ROM_START( hunter2 )
|
||||
ROM_REGION(0x30000, "roms", ROMREGION_ERASEFF) // board has space for 6 roms, but only 2 are populated normally
|
||||
ROM_LOAD( "tr032kx8mrom0.ic50", 0x0000, 0x8000, CRC(694d252c) SHA1(b11dbf24faf648596d92b1823e25a8e4fb7f542c) )
|
||||
ROM_LOAD( "tr032kx8mrom1.ic51", 0x8000, 0x8000, CRC(82901642) SHA1(d84f2bbd2e9e052bd161a313c240a67918f774ad) )
|
||||
ROM_START( hunter )
|
||||
ROM_REGION(0x10000, "rom", ROMREGION_ERASEFF) // board has space for 6 roms, but only 2 are populated normally
|
||||
ROM_SYSTEM_BIOS(0, "1", "DEMOS 2.2 9G06h")
|
||||
ROMX_LOAD( "99-06h-00.ic50", 0x0000, 0x8000, CRC(ccc57737) SHA1(917d0d7983ab735b24e36b1e75b948c444105f28), ROM_BIOS(0) )
|
||||
ROMX_LOAD( "99-06h-01.ic51", 0x8000, 0x8000, CRC(8b1b18c7) SHA1(734d37505cf4c3c8effc75dedd129311a9b20a38), ROM_BIOS(0) )
|
||||
ROM_SYSTEM_BIOS(1, "2", "DEMOS 2.2 9G+")
|
||||
ROMX_LOAD( "husky0iss9.ic50", 0x0000, 0x8000, CRC(77f80f33) SHA1(b0240ecfc95d32e960179af2bfa97fe5b38f7440), ROM_BIOS(1) )
|
||||
ROMX_LOAD( "husky1iss9.ic51", 0x8000, 0x8000, CRC(2c8f05fb) SHA1(5debc00037259be0d017c34e54ef4992cd6c0b38), ROM_BIOS(1) )
|
||||
ROM_SYSTEM_BIOS(2, "3", "DEMOS Ver 2.2") // not working, maybe auto-run software from RAM
|
||||
ROMX_LOAD( "v08c-0.ic50", 0x0000, 0x2000, CRC(e32687f5) SHA1(1679e1aa78d822da57f59f1eb5560c96794a199f), ROM_BIOS(2) )
|
||||
ROMX_LOAD( "v08c-1.ic51", 0x2000, 0x2000, CRC(cc669b10) SHA1(f9a197bfc9e5800910ba71b5c4e8d810320a7a43), ROM_BIOS(2) )
|
||||
ROMX_LOAD( "v08c-2.ic52", 0x4000, 0x2000, CRC(df0a4dcb) SHA1(79e49d37ae710790c29bc49e2ec7c9c113a36561), ROM_BIOS(2) )
|
||||
ROMX_LOAD( "v08c-3.ic53", 0x6000, 0x2000, CRC(d6a7869e) SHA1(e3d3364b4083f312031e96b340fbda763b310d28), ROM_BIOS(2) )
|
||||
ROMX_LOAD( "v08c-4.ic54", 0x8000, 0x2000, CRC(0339b049) SHA1(7d5d5297ee9db348566b8f717942bde0eb67d058), ROM_BIOS(2) )
|
||||
ROMX_LOAD( "v08c-5.ic55", 0xa000, 0x2000, CRC(98fcde65) SHA1(b9f3ce9a172ab29672026912e96c4a838cbddb46), ROM_BIOS(2) )
|
||||
ROM_SYSTEM_BIOS(3, "4", "DEMOS 2.2 9G06h (6 ROMs)")
|
||||
ROMX_LOAD( "eprom0.ic50", 0x0000, 0x2000, CRC(ad861c35) SHA1(fe8bcad60d4a0dc94cc6756d9132743f27fbb65d), ROM_BIOS(3) )
|
||||
ROMX_LOAD( "eprom1.ic51", 0x2000, 0x2000, CRC(c8c2fae8) SHA1(4235b4483ea8a091d332248074f72f220692c05e), ROM_BIOS(3) )
|
||||
ROMX_LOAD( "eprom2.ic52", 0x4000, 0x2000, CRC(b301621f) SHA1(02a0ce58405e95b48f7ac8aa291cb836a6927375), ROM_BIOS(3) )
|
||||
ROMX_LOAD( "eprom3.ic53", 0x6000, 0x2000, CRC(be6f196a) SHA1(73fc7f953b56d491ad4fcfe80636db0150a718dc), ROM_BIOS(3) )
|
||||
ROMX_LOAD( "eprom4.ic54", 0x8000, 0x2000, CRC(7a0d2228) SHA1(6667fbd5583217ea7ba9b4b4fc9dc56240b0e14e), ROM_BIOS(3) )
|
||||
ROMX_LOAD( "eprom5.ic55", 0xa000, 0x2000, CRC(48526702) SHA1(bd8f5a37e5f16511623dc128e2b95b4866b4297a), ROM_BIOS(3) )
|
||||
ROM_END
|
||||
|
||||
// 48 x 4k blocks plus 1 sinkhole
|
||||
ROM_REGION(0xc4000, "rams", ROMREGION_ERASEVAL(0xa5)) // board can have up to 736k of ram, but 192k is standard
|
||||
ROM_START( hunter2 )
|
||||
ROM_REGION(0x10000, "rom", ROMREGION_ERASEFF) // board has space for 6 roms, but only 2 are populated normally
|
||||
ROM_SYSTEM_BIOS(0, "1", "DEMOS 2.21 9G08h V4")
|
||||
ROMX_LOAD( "tr032kx8mrom0.ic50", 0x0000, 0x8000, CRC(694d252c) SHA1(b11dbf24faf648596d92b1823e25a8e4fb7f542c), ROM_BIOS(0) )
|
||||
ROMX_LOAD( "tr032kx8mrom1.ic51", 0x8000, 0x8000, CRC(82901642) SHA1(d84f2bbd2e9e052bd161a313c240a67918f774ad), ROM_BIOS(0) )
|
||||
ROM_END
|
||||
|
||||
/* Driver */
|
||||
|
||||
// YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS
|
||||
COMP( 1981, hunter2, 0, 0, hunter2, hunter2, hunter2_state, init_hunter2, "Husky", "Hunter 2", MACHINE_NOT_WORKING )
|
||||
// YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS
|
||||
COMP( 1983, hunter, hunter2, 0, hunter, hunter2, hunter2_state, init_hunter2, "Husky Computers Ltd", "Husky Hunter", MACHINE_NOT_WORKING )
|
||||
COMP( 1984, hunter2, 0, 0, hunter2, hunter2, hunter2_state, init_hunter2, "Husky Computers Ltd", "Husky Hunter 2", MACHINE_NOT_WORKING )
|
||||
|
||||
@ -15749,6 +15749,7 @@ ht68k //
|
||||
amu880 //
|
||||
|
||||
@source:hunter2.cpp
|
||||
hunter // Husky Hunter
|
||||
hunter2 // Husky Hunter 2
|
||||
|
||||
@source:hunter16.cpp
|
||||
|
||||
Loading…
Reference in New Issue
Block a user