Sprinter/mame
2
0
Fork 0
mirror of https://github.com/holub/mame synced 2025-04-24 17:30:55 +03:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

viper.c - fix some minor text layout issues in my readme (nw)

Browse Source
This commit is contained in:
Guru 2014-11-29 07:22:01 +00:00
parent ec3cec46c7
commit 41e910a5b1
1 changed files with 6 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
src/mame/drivers/viper.c
View File

@ -93,7 +93,8 @@ MB81G163222-80 - Fujitsu MB81G163222-80 256k x 32-bit x 2 banks Synchronous Grap
DIN pins 2, 3 & 4. Pin 1 NC, Pin 2 GND, Pin 3 DATA, Pin 4 NC, Pin 5 NC. If the dongle is
required and plugged in it overrides the DS2430 on the main board. Without the (on-board)
DS2430 the PCB will complain after the CF check with HARDWARE ERROR. If the DS2430 is not
correct for the game the error given is RTC BAD even if the RTC is correct. Most games don't require a dongle and use the factory DS2430 on the main board.
correct for the game the error given is RTC BAD even if the RTC is correct. Most games don't require
a dongle and use the factory DS2430 on the main board.
CN12 - 4 pin connector (possibly stereo audio output?)
CN13 - Power connector for plug-in daughterboard
CN15/CN16 - Multi-pin IDC connectors for plug-in daughterboard (see detail below)
@ -101,7 +102,8 @@ MB81G163222-80 - Fujitsu MB81G163222-80 256k x 32-bit x 2 banks Synchronous Grap
software resides on the CF card. Games use 32M, 64M and 128M CF cards. In many cases a different
CF card version of the same game can be swapped and the existing RTC works but sometimes the RTC data
needs to be re-initialised to factory defaults by entering test mode. Sometimes the game will not boot
and gives error RTC BAD meaning the RTC is not compatible with the version or the dongle is required. See DS2430 above for more info.
and gives error RTC BAD meaning the RTC is not compatible with the version or the dongle is required.
See DS2430 above for more info.
28-WAY - Edge connector used for connecting special controls such as guns etc.
DIP(4) - 4-position DIP switch. Switch 1 skips the CF check for a faster boot-up. The others appear unused?
@ -182,7 +184,8 @@ MB81G163222-80 - Fujitsu MB81G163222-80 256k x 32-bit x 2 banks Synchronous Grap
CN2/CN3 - Video output connector to external monitors
CN4/CN5 - Multi-pin IDC connectors joining to main board CN15/CN16
An additional control PCB is used for Mocap Golf for the golf club sensor. It contains a ROMless MCU, an EPROM and some other components. It will be documented at a later date.
An additional control PCB is used for Mocap Golf for the golf club sensor. It contains a ROMless MCU, an EPROM and
some other components. It will be documented at a later date.
*/