(nw) fixed a few random typos

src/mame/drivers/candela.cpp

@@ -6,7 +6,7 @@
  *---------------------------
  * The Candela computer was designed to be the big breakthough and developed by Candela Data AB, "a Didact Company".
  * The Candela system was based around a main unit that could run OS-9 or Flex and a terminal unit that had a
- * propietary software including CDBASIC. The Candela system lost the battle of the swedish schools to
+ * proprietory software including CDBASIC. The Candela system lost the battle of the Swedish schools to
  * the Compis computer by TeleNova which was based on CP/M initially.  Later both lost to IBM PC as we know.
  * Candela Data continued to sell their system to the swedish industry without major successes despite great
  * innovation and spririt.
@@ -485,7 +485,7 @@ INPUT_PORTS_END
  * Candela Main Unit
  * TODO:
  * - Map PIA:S
- * - ROM/RAM paging by using the PIA:s and the myriad of 74138:s on the board
+ * - ROM/RAM paging by using the PIAs and the myriad of 74138s on the board
  * - Vram and screen for the 6845 CRTC
  * - Keyboard
  * - Serial port
@@ -504,6 +504,10 @@ public:
 		,m_bank1(*this, "bank1")
 		,m_crtc(*this, "crtc")
 	{ }
+
+	void can09(machine_config &config);
+
+protected:
 	required_device<cpu_device> m_maincpu;
 	virtual void machine_reset() override;
 	virtual void machine_start() override;
@@ -513,9 +517,7 @@ public:
 	DECLARE_WRITE8_MEMBER( pia1_B_w );
 	DECLARE_WRITE_LINE_MEMBER( pia1_cb2_w);
 	uint32_t screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
-	void can09(machine_config &config);
 	void can09_map(address_map &map);
-protected:
 	required_device<pia6821_device> m_pia1;
 	required_device<ram_device> m_ram;
 	required_memory_bank m_bank1;
@@ -626,7 +628,7 @@ static INPUT_PORTS_START( can09 )
 INPUT_PORTS_END
 
 // traced and guessed from pcb images and debugger
-// It is very likelly that this is a PIA based dynamic address map, needs more analysis
+// It is very likely that this is a PIA based dynamic address map, needs more analysis
 void can09_state::can09_map(address_map &map)
 {
 /*

src/mame/drivers/dbox.cpp

@@ -32,10 +32,10 @@
  *
  * History of Nokia Multimedia Division
  *-------------------------------------
- * Luxor AB was a swedish home electronics and computer manufacturer located in Motala from 1923 and aquired
+ * Luxor AB was a swedish home electronics and computer manufacturer located in Motala from 1923 and acquired
  * by Nokia 1985. Luxor designed among other things TV setsm Radios and the famous ABC-80. The Nokia Multimedia
  * Division was formed in Linköping as a result of the Luxor aquesition. Their main design was a satellite
- * receiver, the first satellite in Europee was launched in 1988 and market was growing fast however it took
+ * receiver, the first satellite in Europe was launched in 1988 and the market was growing fast however it took
  * a long time, almost 10 years before the breakthrough came for Nokia, a deal with the Kirsch Gruppe was struck and
  * in 1996 the 68340 based Dbox-1 was released in Germany. The original design was expensive, so soon a cost reduced
  * version based on PPC, the Dbox-2, was released. The boxes sold in millions but the margins were negative or very

src/mame/drivers/diablo1300.cpp

@@ -6,7 +6,7 @@
 
  - Microprocessor based control logic for increased capacity and flexibility, plus provision for implementation of additional features.
  - Advanced servo design for improved efficiency and performance.
- - Rigid one piece cast aluminum frame to better maintain print quality, and reduce maintenance requirements.
+ - Rigid one piece cast aluminium frame to better maintain print quality, and reduce maintenance requirements.
  - Rugged highly stable carriage assembly for enhanced print position accuracy and reduced maintenance.
  - Plug-in interchangeable printed pircuit boards (PCB's), readily accessible for ease and simplicity of service, and implementation
    of options and interfaces.
@@ -96,7 +96,7 @@ The board is marked 40510 and has no connectors except the 56 signal bus edge co
  4 74S289        4x16 bit RAM
  1 74107         Dual J-K M/S flip flops w clear
  1 74LS155  7731 1/2/3 to 4/8 lines decoder nwih totem pole ouputs
- 2 74161    7904 synchronous binary 4 bit counter
+ 2 74161    7904 Synchronous binary 4 bit counter
  4 74LS259  7906 8 bit addressable latches
  4 74298    7849 Quad 2 input mux with storage
  1 74367    7840 Non inverted 3 state outputs, 2 and 4 line enabled inputs
@@ -117,7 +117,7 @@ The serial interface card is z80 based and marked DIABLO-1300-V24
  3 7432N   7832 QUAD OR gates
  1 1489    7841 Quad line receivers
  1 1488    7823 Quad line tranceivers
- 1 74163   7827 Synchrounous 4 bit counters
+ 1 74163   7827 Synchronous 4 bit counters
  2 7493    7822 4 bit binary counters
  2 7404    7849 Hex inverters
  1 7410    7849 Tripple 3-input NAND gates

src/mame/drivers/didact.cpp

@@ -232,7 +232,7 @@ WRITE8_MEMBER( md6802_state::pia2_kbA_w )
 		m_7segs[digit_nbr] = m_segments;
 }
 
-/* PIA 2 Port B is all outputs to drive the display so it is very unlikelly that this function is called */
+/* PIA 2 Port B is all outputs to drive the display so it is very unlikely that this function is called */
 READ8_MEMBER( md6802_state::pia2_kbB_r )
 {
 	LOG("Warning, trying to read from Port B designated to drive the display, please check why\n");
@@ -379,7 +379,7 @@ WRITE8_MEMBER( mp68a_state::pia2_kbA_w )
 	uint8_t const digit_nbr = (data >> 4) & 0x07;
 
 	/* There is actually only one 9368 and a 74145 to drive the cathode of the right digit low */
-	/* This can be emulated by prentending there are one 9368 per digit, at least for now      */
+	/* This can be emulated by pretending there are one 9368 per digit, at least for now      */
 	switch (digit_nbr)
 	{
 	case 0:

src/mame/drivers/e100.cpp

@@ -10,7 +10,7 @@
  * extended with commands suitable for educational experiments using the exapansion bus and its built in
  * io control capabilities.
  *
- * The Esselte 1000 was an educational package based on Apple II plus software and litterature but the relation
+ * The Esselte 1000 was an educational package based on Apple II plus software and literature but the relation
  * to Didact is at this point unknown so it is probably a pure Esselte software production. If this branded
  * distribution is recovered it will be added as a clone of the Apple II driver or just as softlist item.
  *
@@ -97,7 +97,7 @@
  * |DIDACT ESS 100 CPU                         +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----++                            |
  * |___________________________________________________________________________________________________________+----+__+----+__+----+_____+----
  *
- * rev2 board had 4Kb more ROM memory, 2 x 2764 instead of the 6 x 2716 (note the rev1 piggy back on righ most 2716) with funny address decoding.
+ * rev2 board had 4Kb more ROM memory, 2 x 2764 instead of the 6 x 2716 (note the rev1 piggyback on rightmost 2716) with funny address decoding.
  * Once we get a rom dump for rev 1 the driver need to accomodate another keymap too so probably needs to be splitted somehow.
  *  __________________________________________________________________________________________________________________________________________
  * | The Didact Esselte 100 CPU board rev2, 15/4 1983                                                                     in-PCB coil     +----
@@ -344,7 +344,7 @@ READ8_MEMBER( e100_state::pia1_kbA_r )
   PB4-PB5 together with CA1, CA2, CB1 and CB2 are used for the printer interface
   PB6-PB7 forms the cassette interface
 
-  The serial bitbanging perform enreliable atm, can be poor original code or inexact CPU timing.
+  The serial bitbanging perform unreliable atm, can be poor original code or inexact CPU timing.
   Best results is achieved with 8 bit at 9600 baud as follows:
 
     mame e100 -window -rs232 null_modem -bitbngr socket.127.0.0.1:4321

src/mame/drivers/fccpu30.cpp

@@ -72,10 +72,10 @@
  *---------------------------
  * 1981 Force Computers was founded in San Jose, California. Over time a European headquarter was opened
  *      in Munich, Germany, and a Japanese headquarter in Tokyo
- * 1996 Force was aquired by Solectron Corporation in 1996
+ * 1996 Force was acquired by Solectron Corporation in 1996
  * 2004 Force was sold off from Solectron to Motorola
- * 2008 Force was aquired by Emerson as part of the Motorola Embedded Division
+ * 2008 Force was acquired by Emerson as part of the Motorola Embedded Division
- * 2016 Force was aquired by Platinum Equity as part of the Emerson Network Power Division
+ * 2016 Force was acquired by Platinum Equity as part of the Emerson Network Power Division
  *
  * Force developed and produced VME board products based on SPARC, Pentium, PowerPC and 68K.
  *

src/mame/drivers/hk68v10.cpp

@@ -71,7 +71,7 @@
  *
  * History of Heurikon
  *---------------------
- * The company was founded 1972 as cellar company. Heurikon was aquired
+ * The company was founded 1972 as cellar company. Heurikon was acquired
  * 1989 by Computer Products, 1990 by Artesyn and finally in 2005 by Emerson
  * Electric who consolidated it fully by 2009 and closed the office.
  *

src/mame/drivers/kron.cpp

@@ -6,9 +6,9 @@
  *
  *  27/10/2015
  *
- * I baught this hardware on Ebay to have something with a Z80 CPU to play with.
+ * I bought this hardware on Ebay to have something with a Z80 CPU to play with.
  * The hardware is a serial terminal controller with VGA output and a PC keyboard
- * and was manufactured mid 90:ies by a company from Vinnitsa,Ukraine called KRON.
+ * and was manufactured mid 90s by a company from Vinnitsa, Ukraine called KRON.
  * There is a character generator with support for both western and cyrilic characters.
  * The PCB is also filled with chips with cyrrilic characters on but thanks to this
  * page I managed to translate most of them into western TTL logic names:
@@ -192,7 +192,7 @@ void kron180_state::kron180_mem(address_map &map)
  *    0  1  1  0  x  x  x  x - Reset KBD
  *    0  1  1  1  x  x  x  x - DKA/DREQ0 Z180 = D0
  *
- * Now, in paralell there is alot of stuff going on in the upper I/O address lines
+ * Now, in parallel there is a lot of stuff going on in the upper I/O address lines
  * they are driving the character generator and some other signals
  *  A19 - not available on the DIP64 package
  *  A18 - multiplexed pin used as Tout pulsing the VT1 signal
@@ -312,7 +312,7 @@ MACHINE_CONFIG_START(kron180_state::kron180)
 	MCFG_SCREEN_REFRESH_RATE(50)
 	MCFG_SCREEN_UPDATE_DRIVER(kron180_state, screen_update)
 	MCFG_SCREEN_SIZE(80 * 10, 24 * 10)
-	MCFG_SCREEN_VISIBLE_AREA(0, 639, 0, 199) // TODO: This need to be fixed once the real chartable is used...
+	MCFG_SCREEN_VISIBLE_AREA(0, 639, 0, 199) // TODO: This need to be fixed once the real char table is used...
 	MCFG_SCREEN_PALETTE("palette")
 
 	MCFG_PALETTE_ADD_MONOCHROME("palette")

src/mame/drivers/miniforce.cpp

@@ -45,8 +45,8 @@
  *---------------------------
  * See fccpu30.cpp
  *
- * Misc links about Force Computes and this board:
+ * Misc links about Force Computers and this board:
- *------------------------------------------------
+ *-------------------------------------------------
  * http://bitsavers.org/pdf/forceComputers/
  *
  * Description, from datasheets etc

src/mame/drivers/mvme147.cpp

@@ -8,7 +8,7 @@
  *
  * Thanks to Plamen Mihaylov and his site http://www.m88k.com/ I got the information
  * required to start the work with this driver. The goal is to boot a tape through
- * the MVME-350 devide connected over a VME bus device.
+ * the MVME-350 device connected over a VME bus device.
  *
  *
  *       ||

src/mame/drivers/myb3k.cpp

@@ -23,7 +23,7 @@
     - Keyboard is not interfaced through 8255
     - Non standard graphics board
 
-    These and other incompatibilities required many PC software's to be
+    These and other incompatibilities required many PC softwares to be
     recompiled to work on this computer.
 
 ****************************************************************************/

src/mame/drivers/mzr8105.cpp

@@ -6,7 +6,7 @@
  *
  *  19/08/2015
  *
- * I baught this board from http://www.retrotechnology.com without documentation.
+ * I bought this board from http://www.retrotechnology.com without documentation.
  * It has a Motorola 68000 CPU @ 10MHz and two 27128 EPROMS with OS9 DEBUG labels
  * and not much more except 16 or so TTLs, 2 PALs and a VME P1 connector. It is a
  * 2 layered pcb so it shold be possible to trace the schematics quite easily.
@@ -91,7 +91,7 @@
  * mailbox interrupt support. Standard MXbus side modules include additional DRAM.
  * SRAM, and I/O.
  *
- * Mizar's standard double- height (6U) processors provide additional features such
+ * Mizar's standard double-height (6U) processors provide additional features such
  * as a high-speed cache to enhance 68030 performance, floating, point coprocessor
  * support, up to four MB dual ported DRAM, VSB memory interface, Ethernet, and SCSI.
  *

src/mame/drivers/terco.cpp

@@ -5,8 +5,8 @@
  *
  * History of Terco
  *------------------
- * Terco, founded 1963, is a privatelly held company in Sweden that develops and distribute equipment for
+ * Terco, founded 1963, is a privately held company in Sweden that develops and distribute equipment for
- * technical vocational educations worldwide. In the mid 80:ies they had a number of state of the art
+ * technical vocational educations worldwide. In the mid 80s they had a number of state of the art
  * products for educations on CNC machines, both mill and lathe, all based on Motorola 8-bit CPU:s.
  *
  * Known products
@@ -25,11 +25,11 @@
  * ------
  *  - Display
  *  - Clickable Artwork
- *  - Serial communication for printer, plotter, paper tape and downlaod from the T4426
+ *  - Serial communication for printer, plotter, paper tape and download from the T4426
  *  - Identify expansion bus
  *  - Keyboard Controller
  *  - Dump keyboard ROM
- *  - Cassette i/f
+ *  - Cassette i/o
  */
 
 #include "emu.h"
@@ -70,7 +70,7 @@
  * 4527    - BCD Rate Multiplexer
  * 555     - analog timer circuit
  * 6800    - 8 bit CPU
- * 6821    - PIA paralell interface
+ * 6821    - PIA parallel interface
  * 6850    - ACIA serial interface
  * 7400    - Quad 2 input NAND gates
  * 7402    - Quad 2 input NOR gates