Cleaned up toaplan2 V25 support, enabled Batsugun V25 and added decryption table info for the other games [David Haywood]
This commit is contained in:
Phil Bennett
parent
e21bdc37b0
commit
5eb822fc78
@ -265,8 +265,8 @@ To Do / Unknowns:
|
||||
|
||||
|
||||
/**************** Machine stuff ******************/
|
||||
#define USE_HD64x180 0 /* Define if CPU support is available */
|
||||
#define USE_V25 0
|
||||
//#define USE_HD64x180 /* Define if CPU support is available */
|
||||
//#define USE_ENCRYPTED_V25S /* Define to enable V25 even on games where it is encrypted */
|
||||
|
||||
#define CPU_2_NONE 0x00
|
||||
#define CPU_2_Z80 0x5a
|
||||
@ -277,7 +277,9 @@ To Do / Unknowns:
|
||||
static UINT8 *toaplan2_shared_ram;
|
||||
static UINT8 *raizing_shared_ram; /* Shared ram used in Shippumd and Mahoudai */
|
||||
static UINT16 *toaplan2_shared_ram16; /* Really 8bit RAM connected to Z180 */
|
||||
#ifndef USE_ENCRYPTED_V25S
|
||||
static UINT16 *V25_shared_ram; /* Really 8bit RAM connected to Z180 */
|
||||
#endif
|
||||
static UINT16 *fixeight_sec_cpu_mem;
|
||||
|
||||
/********** Status related values **********/
|
||||
@ -292,12 +294,10 @@ static UINT16 raizing_Z80_busreq;
|
||||
static int bbakraid_unlimited_ver;
|
||||
|
||||
static MACHINE_RESET(batsugun);
|
||||
#if USE_V25
|
||||
static READ16_HANDLER( batsugun_share_r );
|
||||
static READ16_HANDLER( batsugun_share2_r );
|
||||
static WRITE16_HANDLER( batsugun_share_w );
|
||||
static WRITE16_HANDLER( batsugun_share2_w );
|
||||
#endif
|
||||
|
||||
static const device_config *sub_cpu = NULL;
|
||||
|
||||
@ -400,12 +400,13 @@ static DRIVER_INIT( T2_noZ80 )
|
||||
|
||||
static DRIVER_INIT( fixeight )
|
||||
{
|
||||
#if USE_V25
|
||||
sub_cpu = cputag_get_cpu(machine, "audiocpu");
|
||||
#else
|
||||
memory_install_readwrite16_handler(cputag_get_address_space(machine, "maincpu", ADDRESS_SPACE_PROGRAM), 0x28f002, 0x28fbff, 0, 0, (read16_space_func)SMH_BANK(2), (write16_space_func)SMH_BANK(2) );
|
||||
memory_set_bankptr(machine, 2, fixeight_sec_cpu_mem);
|
||||
#endif
|
||||
|
||||
if (fixeight_sec_cpu_mem)
|
||||
{
|
||||
memory_install_readwrite16_handler(cputag_get_address_space(machine, "maincpu", ADDRESS_SPACE_PROGRAM), 0x28f002, 0x28fbff, 0, 0, (read16_space_func)SMH_BANK(2), (write16_space_func)SMH_BANK(2) );
|
||||
memory_set_bankptr(machine, 2, fixeight_sec_cpu_mem);
|
||||
}
|
||||
|
||||
toaplan2_sub_cpu = CPU_2_V25;
|
||||
register_state_save(machine);
|
||||
@ -628,7 +629,7 @@ static WRITE16_HANDLER( toaplan2_v25_coin_word_w )
|
||||
{
|
||||
toaplan2_coin_w(space, offset, data & 0x0f);
|
||||
|
||||
#if USE_V25
|
||||
#ifdef USE_ENCRYPTED_V25S
|
||||
/* only the ram-based V25 based games access the following bits */
|
||||
//cpu_set_input_line(sub_cpu, INPUT_LINE_RESET, (data & 0x0020) ? CLEAR_LINE : ASSERT_LINE );
|
||||
cpu_set_input_line(sub_cpu, INPUT_LINE_HALT, (data & 0x0010) ? CLEAR_LINE : ASSERT_LINE);
|
||||
@ -641,6 +642,22 @@ static WRITE16_HANDLER( toaplan2_v25_coin_word_w )
|
||||
}
|
||||
}
|
||||
|
||||
static WRITE16_HANDLER( toaplan2_v25_batsugun_coin_word_w )
|
||||
{
|
||||
// logerror("toaplan2_v25_coin_word_w %04x\n",data);
|
||||
|
||||
if (ACCESSING_BITS_0_7)
|
||||
{
|
||||
toaplan2_coin_w(space, offset, data & 0x0f);
|
||||
/* only the ram-based V25 based games access the following bits */
|
||||
//cpu_set_input_line(sub_cpu, INPUT_LINE_RESET, (data & 0x0020) ? CLEAR_LINE : ASSERT_LINE );
|
||||
cpu_set_input_line(sub_cpu, INPUT_LINE_HALT, (data & 0x0010) ? CLEAR_LINE : ASSERT_LINE);
|
||||
}
|
||||
if (ACCESSING_BITS_8_15 && (data & 0xff00) )
|
||||
{
|
||||
logerror("Writing unknown upper MSB command (%04x) to coin control\n",data & 0xff00);
|
||||
}
|
||||
}
|
||||
|
||||
static WRITE16_HANDLER( shippumd_coin_word_w )
|
||||
{
|
||||
@ -809,6 +826,7 @@ static WRITE16_HANDLER( ghox_shared_ram_w )
|
||||
}
|
||||
}
|
||||
|
||||
#ifndef USE_ENCRYPTED_V25S
|
||||
static READ16_HANDLER( shared_ram_r )
|
||||
{
|
||||
/* Other games using a NEC V25+ secondary CPU, have shared memory between
|
||||
@ -869,24 +887,6 @@ static WRITE16_HANDLER( dogyuun_snd_cpu_w )
|
||||
logerror("PC:%06x Writing command (%04x) to the NEC V25+ secondary CPU port\n",cpu_get_previouspc(space->cpu),mcu_data);
|
||||
}
|
||||
|
||||
static READ16_HANDLER( kbash_snd_cpu_r )
|
||||
{
|
||||
/* Knuckle Bash's 68000 reads secondary CPU status via an I/O port.
|
||||
If a value of 2 is read, then secondary CPU is busy.
|
||||
Secondary CPU must report 0xff when no longer busy, to signify that it
|
||||
has passed POST.
|
||||
*/
|
||||
return 0xff;
|
||||
}
|
||||
|
||||
static WRITE16_HANDLER( kbash_snd_cpu_w )
|
||||
{
|
||||
if (ACCESSING_BITS_0_7)
|
||||
{
|
||||
kbash_okisnd_w(devtag_get_device(space->machine, "oki"), data);
|
||||
}
|
||||
logerror("PC:%06x Writing Sound command (%04x) to the NEC V25+ secondary CPU\n",cpu_get_previouspc(space->cpu),data);
|
||||
}
|
||||
|
||||
static READ16_HANDLER( fixeight_sec_cpu_r )
|
||||
{
|
||||
@ -934,8 +934,8 @@ static WRITE16_HANDLER( fixeight_sec_cpu_w )
|
||||
/* game keeping service mode. It writes/reads the settings to/from */
|
||||
/* these shared RAM locations. The secondary CPU reads/writes them */
|
||||
/* from/to nvram to store the settings (a 93C45 EEPROM) */
|
||||
memory_install_readwrite16_handler(space, 0x28f002, 0x28fbff, 0, 0, (read16_space_func)SMH_BANK(2), (write16_space_func)SMH_BANK(2));
|
||||
memory_set_bankptr(space->machine, 2, fixeight_sec_cpu_mem);
|
||||
//memory_install_readwrite16_handler(space, 0x28f002, 0x28fbff, 0, 0, (read16_space_func)SMH_BANK(2), (write16_space_func)SMH_BANK(2));
|
||||
//memory_set_bankptr(space->machine, 2, fixeight_sec_cpu_mem);
|
||||
memory_install_read_port_handler(space, 0x28f004, 0x28f005, 0, 0, "DSWA"); /* Dip Switch A - Wrong !!! */
|
||||
memory_install_read_port_handler(space, 0x28f006, 0x28f007, 0, 0, "DSWB"); /* Dip Switch B - Wrong !!! */
|
||||
memory_install_read_port_handler(space, 0x28f008, 0x28f009, 0, 0, "JMPR"); /* Territory Jumper block - Wrong !!! */
|
||||
@ -981,6 +981,27 @@ static WRITE16_HANDLER( V25_sharedram_w )
|
||||
V25_shared_ram[offset] = data & 0xff;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
static READ16_HANDLER( kbash_snd_cpu_r )
|
||||
{
|
||||
/* Knuckle Bash's 68000 reads secondary CPU status via an I/O port.
|
||||
If a value of 2 is read, then secondary CPU is busy.
|
||||
Secondary CPU must report 0xff when no longer busy, to signify that it
|
||||
has passed POST.
|
||||
*/
|
||||
return 0xff;
|
||||
}
|
||||
|
||||
static WRITE16_HANDLER( kbash_snd_cpu_w )
|
||||
{
|
||||
if (ACCESSING_BITS_0_7)
|
||||
{
|
||||
kbash_okisnd_w(devtag_get_device(space->machine, "oki"), data);
|
||||
}
|
||||
logerror("PC:%06x Writing Sound command (%04x) to the NEC V25+ secondary CPU\n",cpu_get_previouspc(space->cpu),data);
|
||||
}
|
||||
|
||||
|
||||
static WRITE16_DEVICE_HANDLER( oki_bankswitch_w )
|
||||
{
|
||||
@ -1363,7 +1384,7 @@ static ADDRESS_MAP_START( dogyuun_68k_mem, ADDRESS_SPACE_PROGRAM, 16 )
|
||||
AM_RANGE(0x200014, 0x200015) AM_READ_PORT("IN2")
|
||||
AM_RANGE(0x200018, 0x200019) AM_READ_PORT("SYS")
|
||||
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_v25_coin_word_w)
|
||||
#if USE_V25
|
||||
#ifdef USE_ENCRYPTED_V25S
|
||||
// AM_RANGE(0x21e000, 0x21fbff) AM_READWRITE(shared_ram_r, shared_ram_w) AM_BASE(&toaplan2_shared_ram16) /* $21f000 status port */
|
||||
// AM_RANGE(0x21fc00, 0x21ffff) AM_READWRITE(V25_sharedram_r, V25_sharedram_w) AM_BASE(&V25_shared_ram) /* 16-bit on 68000 side, 8-bit on V25+ side */
|
||||
AM_RANGE(0x210000, 0x21efff) AM_READWRITE( batsugun_share2_r, batsugun_share2_w )
|
||||
@ -1503,7 +1524,7 @@ static ADDRESS_MAP_START( pipibibi_68k_mem, ADDRESS_SPACE_PROGRAM, 16 )
|
||||
AM_RANGE(0x19c034, 0x19c035) AM_READ_PORT("IN2")
|
||||
ADDRESS_MAP_END
|
||||
|
||||
#if USE_V25
|
||||
#ifdef USE_ENCRYPTED_V25S
|
||||
// guess, could be wrong
|
||||
WRITE16_HANDLER( fixeight_subcpu_ctrl )
|
||||
{
|
||||
@ -1521,7 +1542,7 @@ static ADDRESS_MAP_START( fixeight_68k_mem, ADDRESS_SPACE_PROGRAM, 16 )
|
||||
AM_RANGE(0x200008, 0x200009) AM_READ_PORT("IN3")
|
||||
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("SYS")
|
||||
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_coin_word_w) /* Coin count/lock */
|
||||
#if USE_V25
|
||||
#ifdef USE_ENCRYPTED_V25S
|
||||
// AM_RANGE(0x28e000, 0x28fbff) AM_READWRITE(shared_ram_r, shared_ram_w) AM_BASE(&toaplan2_shared_ram16) /* $28f000 status port */
|
||||
// AM_RANGE(0x28fc00, 0x28ffff) AM_READWRITE(V25_sharedram_r, V25_sharedram_w) AM_BASE(&V25_shared_ram) /* 16-bit on 68000 side, 8-bit on V25+ side */
|
||||
AM_RANGE(0x280000, 0x28efff) AM_READWRITE( batsugun_share2_r, batsugun_share2_w )
|
||||
@ -1583,7 +1604,7 @@ static ADDRESS_MAP_START( vfive_68k_mem, ADDRESS_SPACE_PROGRAM, 16 )
|
||||
AM_RANGE(0x200014, 0x200015) AM_READ_PORT("IN2")
|
||||
AM_RANGE(0x200018, 0x200019) AM_READ_PORT("SYS")
|
||||
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_v25_coin_word_w) /* Coin count/lock */
|
||||
#if USE_V25
|
||||
#ifdef USE_ENCRYPTED_V25S
|
||||
// AM_RANGE(0x21e000, 0x21fbff) AM_READWRITE(shared_ram_r, shared_ram_w) AM_BASE(&toaplan2_shared_ram16) /* $21f000 status port */
|
||||
// AM_RANGE(0x21fc00, 0x21ffff) AM_READWRITE(V25_sharedram_r, V25_sharedram_w) AM_BASE(&V25_shared_ram) /* 16-bit on 68000 side, 8-bit on V25+ side */
|
||||
AM_RANGE(0x210000, 0x21efff) AM_READWRITE( batsugun_share2_r, batsugun_share2_w )
|
||||
@ -1605,7 +1626,6 @@ static ADDRESS_MAP_START( vfive_68k_mem, ADDRESS_SPACE_PROGRAM, 16 )
|
||||
ADDRESS_MAP_END
|
||||
|
||||
|
||||
#if USE_V25
|
||||
static UINT8* batsugun_share;
|
||||
static UINT8* batsugun_share2;
|
||||
|
||||
@ -1649,7 +1669,6 @@ static WRITE16_HANDLER( batsugun_share2_w )
|
||||
batsugun_share2[offset] = data;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
static ADDRESS_MAP_START( batsugun_68k_mem, ADDRESS_SPACE_PROGRAM, 16 )
|
||||
AM_RANGE(0x000000, 0x07ffff) AM_ROM
|
||||
@ -1657,21 +1676,19 @@ static ADDRESS_MAP_START( batsugun_68k_mem, ADDRESS_SPACE_PROGRAM, 16 )
|
||||
AM_RANGE(0x200010, 0x200011) AM_READ_PORT("IN1")
|
||||
AM_RANGE(0x200014, 0x200015) AM_READ_PORT("IN2")
|
||||
AM_RANGE(0x200018, 0x200019) AM_READ_PORT("SYS")
|
||||
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_v25_coin_word_w) /* Coin count/lock + v25 reset/hold control lines? */
|
||||
#if USE_V25
|
||||
// AM_RANGE(0x21e000, 0x21fbff) AM_READWRITE(shared_ram_r, shared_ram_w) AM_BASE(&toaplan2_shared_ram16) /* $21f000 status port */
|
||||
// AM_RANGE(0x21fc00, 0x21ffff) AM_READWRITE(V25_sharedram_r, V25_sharedram_w) AM_BASE(&V25_shared_ram) /* 16-bit on 68000 side, 8-bit on V25+ side */
|
||||
AM_RANGE(0x210000, 0x21efff) AM_READWRITE( batsugun_share2_r, batsugun_share2_w )
|
||||
AM_RANGE(0x21f000, 0x21ffff) AM_READWRITE( batsugun_share_r, batsugun_share_w )
|
||||
#else
|
||||
AM_RANGE(0x210000, 0x21bbff) AM_RAM
|
||||
AM_RANGE(0x21e000, 0x21efff) AM_READWRITE(shared_ram_r, shared_ram_w) AM_BASE(&toaplan2_shared_ram16)
|
||||
AM_RANGE(0x20001c, 0x20001d) AM_WRITE(toaplan2_v25_batsugun_coin_word_w) /* Coin count/lock + v25 reset/hold control lines? */
|
||||
|
||||
/* override the shared region with some hacks because we're not emulating the V25+ well enough to provide these */
|
||||
#ifndef USE_ENCRYPTED_V25S
|
||||
AM_RANGE(0x21f000, 0x21f001) AM_READWRITE(toaplan2_snd_cpu_r, batsugun_snd_cpu_w) /* V25+ Command/Status port */
|
||||
AM_RANGE(0x21f004, 0x21f005) AM_READ_PORT("DSWA")
|
||||
AM_RANGE(0x21f006, 0x21f007) AM_READ_PORT("DSWB")
|
||||
AM_RANGE(0x21f008, 0x21f009) AM_READ_PORT("JMPR")
|
||||
AM_RANGE(0x21fc00, 0x21ffff) AM_READWRITE(V25_sharedram_r, V25_sharedram_w) AM_BASE(&V25_shared_ram) /* 16-bit on 68000 side, 8-bit on V25+ side */
|
||||
#endif
|
||||
/* this ram is shared with the V25+, once it's emulated properly only these should be needed */
|
||||
AM_RANGE(0x210000, 0x21efff) AM_READWRITE( batsugun_share2_r, batsugun_share2_w )
|
||||
AM_RANGE(0x21f000, 0x21ffff) AM_READWRITE( batsugun_share_r, batsugun_share_w )
|
||||
|
||||
/***** The following in 0x30000x are for video controller 1 ******/
|
||||
AM_RANGE(0x300000, 0x300001) AM_WRITE(toaplan2_0_voffs_w) /* VideoRAM selector/offset */
|
||||
AM_RANGE(0x300004, 0x300007) AM_READWRITE(toaplan2_0_videoram16_r, toaplan2_0_videoram16_w) /* Tile/Sprite VideoRAM */
|
||||
@ -1930,7 +1947,7 @@ ADDRESS_MAP_END
|
||||
|
||||
|
||||
|
||||
#if USE_HD64x180
|
||||
#ifdef USE_HD64x180
|
||||
static ADDRESS_MAP_START( hd647180_mem, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
AM_RANGE(0x0000, 0x7fff) AM_ROM
|
||||
AM_RANGE(0xfe00, 0xffff) AM_RAM /* Internal 512 bytes of RAM */
|
||||
@ -1938,11 +1955,9 @@ ADDRESS_MAP_END
|
||||
#endif
|
||||
|
||||
|
||||
#if USE_V25
|
||||
|
||||
/* this seems to be the map for the ROM based game, Knuckle Bash */
|
||||
static ADDRESS_MAP_START( V25_mem, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
AM_RANGE(0x00000, 0x03fff) AM_ROM
|
||||
static ADDRESS_MAP_START( V25_kbash_mem, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
// AM_RANGE(0x00000, 0x03fff) AM_ROM
|
||||
// AM_RANGE(0x00000, 0x007ff) AM_RAM /* External shared RAM (Banked) */
|
||||
AM_RANGE(0x04000, 0x04001) AM_DEVREADWRITE("ym", ym2151_r, ym2151_w)
|
||||
AM_RANGE(0x04002, 0x04002) AM_DEVREADWRITE("oki", okim6295_r, okim6295_w)
|
||||
@ -1953,10 +1968,12 @@ static ADDRESS_MAP_START( V25_mem, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
AM_RANGE(0x0400e, 0x0400e) AM_WRITE(toaplan2_coin_w)
|
||||
AM_RANGE(0x0fe00, 0x0ffff) AM_RAM /* Internal 512 bytes of RAM */
|
||||
// AM_RANGE(0x80000, 0x87fff) AM_RAM AM_BASE(&V25_sharedram) /* External shared RAM (ROM for KBASH) */
|
||||
|
||||
AM_RANGE(0xa0000, 0xa7fff) AM_ROM AM_SHARE(10)
|
||||
AM_RANGE(0xf8000, 0xfffff) AM_ROM AM_SHARE(10) AM_REGION("mcu", 0)
|
||||
ADDRESS_MAP_END
|
||||
|
||||
|
||||
static ADDRESS_MAP_START( V25_port, ADDRESS_SPACE_IO, 8 )
|
||||
static ADDRESS_MAP_START( V25_kbash_port, ADDRESS_SPACE_IO, 8 )
|
||||
AM_RANGE(0x0060, 0x0060) AM_READ_PORT("DSWA") /* Directly mapped I/O ports */
|
||||
AM_RANGE(0x0061, 0x0061) AM_READ_PORT("DSWA") /* Directly mapped I/O ports */
|
||||
AM_RANGE(0x0062, 0x0062) AM_READ_PORT("JMPR") /* Directly mapped I/O ports */
|
||||
@ -1970,9 +1987,6 @@ ADDRESS_MAP_END
|
||||
Others are encrypted
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
static ADDRESS_MAP_START( V25_rambased_mem, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
AM_RANGE(0x00000, 0x00001) AM_DEVREADWRITE("ym", ym2151_r, ym2151_w)
|
||||
|
||||
@ -1988,15 +2002,6 @@ static ADDRESS_MAP_START( V25_rambased_mem, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
AM_RANGE(0xff800, 0xfffff) AM_RAM AM_SHARE(6) AM_BASE(&batsugun_share)
|
||||
ADDRESS_MAP_END
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
/*****************************************************************************
|
||||
Input Port definitions
|
||||
Service input of the TOAPLAN2_SYSTEM_INPUTS is used as a Pause type input.
|
||||
@ -3385,7 +3390,7 @@ static MACHINE_DRIVER_START( tekipaki )
|
||||
MDRV_CPU_PROGRAM_MAP(tekipaki_68k_mem)
|
||||
MDRV_CPU_VBLANK_INT("screen", toaplan2_vblank_irq4)
|
||||
|
||||
#if USE_HD64x180
|
||||
#ifdef USE_HD64x180
|
||||
MDRV_CPU_ADD("mcu", Z180, XTAL_10MHz) /* HD647180 CPU actually */
|
||||
MDRV_CPU_PROGRAM_MAP(hd647180_mem)
|
||||
#endif
|
||||
@ -3424,7 +3429,7 @@ static MACHINE_DRIVER_START( ghox )
|
||||
MDRV_CPU_PROGRAM_MAP(ghox_68k_mem)
|
||||
MDRV_CPU_VBLANK_INT("screen", toaplan2_vblank_irq4)
|
||||
|
||||
#if USE_HD64x180
|
||||
#ifdef USE_HD64x180
|
||||
MDRV_CPU_ADD("mcu", Z180, XTAL_10MHz) /* HD647180 CPU actually */
|
||||
MDRV_CPU_PROGRAM_MAP(hd647180_mem)
|
||||
#endif
|
||||
@ -3454,6 +3459,31 @@ static MACHINE_DRIVER_START( ghox )
|
||||
MDRV_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
|
||||
MACHINE_DRIVER_END
|
||||
|
||||
/* x = modified to match batsugun 'unencrypted' code */
|
||||
|
||||
const UINT8 ts002mach_decryption_table[256] = {
|
||||
0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f, /* 00 */
|
||||
0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f, /* 10 */
|
||||
0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27, 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f, /* 20 */
|
||||
0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37, 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, /* 30 */
|
||||
0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47, 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f, /* 40 */
|
||||
0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57, 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f, /* 50 */
|
||||
0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67, 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f, /* 60 */
|
||||
0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77, 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f, /* 70 */
|
||||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, 0x88,0x89,0x8a,0x8b,0x48,0x8d,0x8e,0x8f, /* 80 */
|
||||
/*x*/
|
||||
0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97, 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f, /* 90 */
|
||||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7, 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf, /* a0 */
|
||||
0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7, 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf, /* b0 */
|
||||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7, 0xc8,0xc9,0xca,0xea,0xcc,0xcd,0xce,0xcf, /* c0 */
|
||||
/*x*/
|
||||
0xd0,0xd1,0xd2,0xd3,0xd4,0xd5,0xd6,0xd7, 0xd8,0xd9,0xda,0xdb,0xdc,0xdd,0xde,0xdf, /* d0 */
|
||||
0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7, 0xe8,0xe9,0xea,0xeb,0xec,0xed,0x33,0xef, /* e0 */
|
||||
/*x*/
|
||||
0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7, 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff, /* f0 */
|
||||
};
|
||||
|
||||
static const nec_config ts002mach_config ={ ts002mach_decryption_table, };
|
||||
|
||||
static MACHINE_DRIVER_START( dogyuun )
|
||||
|
||||
@ -3462,11 +3492,9 @@ static MACHINE_DRIVER_START( dogyuun )
|
||||
MDRV_CPU_PROGRAM_MAP(dogyuun_68k_mem)
|
||||
MDRV_CPU_VBLANK_INT("screen", toaplan2_vblank_irq4)
|
||||
|
||||
#if USE_V25
|
||||
MDRV_CPU_ADD("audiocpu", V25, XTAL_25MHz/2) /* NEC V25+ type Toaplan marked CPU ??? */
|
||||
MDRV_CPU_PROGRAM_MAP(V25_rambased_mem)
|
||||
//MDRV_CPU_IO_MAP(V25_port)
|
||||
#endif
|
||||
MDRV_CPU_CONFIG(ts002mach_config)
|
||||
|
||||
MDRV_MACHINE_RESET(dogyuun)
|
||||
|
||||
@ -3497,6 +3525,52 @@ static MACHINE_DRIVER_START( dogyuun )
|
||||
MDRV_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
|
||||
MACHINE_DRIVER_END
|
||||
|
||||
/* x = modified to match batsugun 'unencrypted' code - '?' likewise, but not so sure about them
|
||||
'!' = code stops being the same as batsugun at this point, might be wrong
|
||||
- they seem to have mostly mapped extra opcodes for common ones, eg. mov
|
||||
*/
|
||||
const UINT8 ts004dash_decryption_table[256] = {
|
||||
0x00,0x01,0x02,0x03,0x8c,0x05,0x06,0x07, 0x08,0x09,0x36,0x0b,0x0c,0x0d,0x8c,0x0f, /* 00 */
|
||||
/*?*/ /*?*/ /*?*/
|
||||
0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x8e,0x1f, /* 10 */
|
||||
/*x*/
|
||||
0x20,0x21,0x22,0x23,0x36,0x25,0x26,0x27, 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f, /* 20 */
|
||||
/*?*/
|
||||
0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37, 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, /* 30 */
|
||||
0x40,0x41,0x42,0x43,0x44,0xb8,0x46,0x47, 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f, /* 40 */
|
||||
/*x*/
|
||||
0x50,0x51,0x52,0xfc,0x54,0x55,0x56,0x57, 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f, /* 50 */
|
||||
/*!*/
|
||||
0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67, 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f, /* 60 */
|
||||
0x70,0x71,0x8c,0x73,0x74,0x75,0x76,0x77, 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f, /* 70 */
|
||||
/*?*/
|
||||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, 0x88,0x89,0x8a,0x8b,0x48,0x8d,0x8e,0x8f, /* 80 */
|
||||
/*x*/
|
||||
0x90,0x91,0x92,0x93,0x94,0x95,0x96,0xbc, 0x98,0x99,0x9a,0x9b,0x9c,0xc6,0x9e,0x9f, /* 90 */
|
||||
/*x*/
|
||||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7, 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf, /* a0 */
|
||||
0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7, 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0x33, /* b0 */
|
||||
/*x*/
|
||||
0xc0,0xc1,0xc2,0xc3,0xc4,0x36,0xc6,0xc7, 0xc8,0xc9,0xc6,0xea,0xcc,0xcd,0xce,0xcf, /* c0 */
|
||||
/*x*/ /*x*//*x*/
|
||||
0xd0,0xd1,0xd2,0xd3,0xd4,0xd5,0xd6,0xd7, 0xbb,0xd9,0xda,0xdb,0xdc,0xdd,0xde,0xdf, /* d0 */
|
||||
/*x*/
|
||||
0xe0,0xe1,0xe2,0xbd,0xe4,0xe5,0xe6,0xe7, 0xe8,0xc7,0xea,0x36,0xec,0xed,0xee,0xef, /* e0 */
|
||||
/*?*/ /*?*/ /*?*/
|
||||
0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0x8e, 0xf8,0xf9,0x36,0xfb,0xfc,0xfd,0xfe,0xff, /* f0 */
|
||||
/*x*/ /*?*/
|
||||
};
|
||||
|
||||
static const nec_config ts004dash_config ={ ts004dash_decryption_table, };
|
||||
|
||||
static MACHINE_RESET(kbash)
|
||||
{
|
||||
#ifndef USE_ENCRYPTED_V25S
|
||||
cpu_set_input_line(sub_cpu, INPUT_LINE_HALT, ASSERT_LINE);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
|
||||
static MACHINE_DRIVER_START( kbash )
|
||||
|
||||
@ -3506,13 +3580,13 @@ static MACHINE_DRIVER_START( kbash )
|
||||
MDRV_CPU_VBLANK_INT("screen", toaplan2_vblank_irq4)
|
||||
|
||||
/* ROM based v25 */
|
||||
#if USE_V25
|
||||
MDRV_CPU_ADD("mcu", V25, XTAL_16MHz) /* NEC V25+ type Toaplan marked CPU ??? */
|
||||
MDRV_CPU_PROGRAM_MAP(V25_mem)
|
||||
MDRV_CPU_IO_MAP(V25_port)
|
||||
#endif
|
||||
MDRV_CPU_PROGRAM_MAP(V25_kbash_mem)
|
||||
MDRV_CPU_IO_MAP(V25_kbash_port)
|
||||
MDRV_CPU_CONFIG(ts004dash_config)
|
||||
|
||||
MDRV_MACHINE_RESET(toaplan2)
|
||||
|
||||
MDRV_MACHINE_RESET(kbash)
|
||||
|
||||
/* video hardware */
|
||||
MDRV_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
|
||||
@ -3733,6 +3807,32 @@ static MACHINE_DRIVER_START( pipibibi )
|
||||
MDRV_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
|
||||
MACHINE_DRIVER_END
|
||||
|
||||
/* x = modified to match batsugun 'unencrypted' code - '?' likewise, but not so sure about them */
|
||||
/* this one seems more different to the other tables */
|
||||
const UINT8 ts001turbo_decryption_table[256] = {
|
||||
0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f, /* 00 */
|
||||
0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f, /* 10 */
|
||||
0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27, 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f, /* 20 */
|
||||
0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37, 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, /* 30 */
|
||||
0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47, 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f, /* 40 */
|
||||
0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57, 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f, /* 50 */
|
||||
0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67, 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f, /* 60 */
|
||||
0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77, 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f, /* 70 */
|
||||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f, /* 80 */
|
||||
0x33,0x91,0x92,0x93,0x94,0x95,0x96,0x97, 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f, /* 90 */
|
||||
/*x*/
|
||||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7, 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf, /* a0 */
|
||||
0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7, 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf, /* b0 */
|
||||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xea,0xc7, 0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf, /* c0 */
|
||||
/*x*/
|
||||
0xd0,0xd1,0xd2,0xd3,0xd4,0xd5,0xd6,0xd7, 0xd8,0xd9,0xda,0xdb,0xdc,0xdd,0xde,0xdf, /* d0 */
|
||||
0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7, 0xe8,0xe9,0xea,0xeb,0xec,0xed,0xee,0xef, /* e0 */
|
||||
0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7, 0xf8,0x48,0xfa,0xfb,0xfc,0xfd,0xfe,0xff, /* f0 */
|
||||
/*x*/
|
||||
};
|
||||
|
||||
static const nec_config ts001turbo_config ={ ts001turbo_decryption_table, };
|
||||
|
||||
|
||||
static MACHINE_DRIVER_START( fixeight )
|
||||
|
||||
@ -3741,14 +3841,15 @@ static MACHINE_DRIVER_START( fixeight )
|
||||
MDRV_CPU_PROGRAM_MAP(fixeight_68k_mem)
|
||||
MDRV_CPU_VBLANK_INT("screen", toaplan2_vblank_irq4)
|
||||
|
||||
#if USE_V25
|
||||
MDRV_CPU_ADD("audiocpu", V25, XTAL_16MHz) /* NEC V25+ type Toaplan marked CPU ??? */
|
||||
MDRV_CPU_PROGRAM_MAP(V25_rambased_mem)
|
||||
MDRV_CPU_CONFIG(ts001turbo_config)
|
||||
//MDRV_CPU_IO_MAP(V25_port)
|
||||
#endif
|
||||
|
||||
MDRV_MACHINE_RESET(batsugun)
|
||||
// MDRV_NVRAM_HANDLER(fixeight) /* See 37B6 code */
|
||||
// MDRV_MACHINE_RESET(toaplan2)
|
||||
|
||||
// MDRV_NVRAM_HANDLER(fixeight) /* See 37B6 code */
|
||||
|
||||
/* video hardware */
|
||||
MDRV_VIDEO_ATTRIBUTES(VIDEO_UPDATE_BEFORE_VBLANK)
|
||||
@ -3810,6 +3911,37 @@ static MACHINE_DRIVER_START( fixeighb )
|
||||
MDRV_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0)
|
||||
MACHINE_DRIVER_END
|
||||
|
||||
/* according to the comments this chip has the same markings as the Batsugun chip,
|
||||
maybe they double map some opcodes on it and recycled the chips using unencrypted ones
|
||||
for Batsugun??
|
||||
|
||||
- note, the basic startup code remapping seems identical between all games, so they
|
||||
probably use a common remap with some per-game changes which supports the above theory
|
||||
*/
|
||||
const UINT8 ts007spy_vfive_decryption_table[256] = {
|
||||
0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f, /* 00 */
|
||||
0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f, /* 10 */
|
||||
0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27, 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f, /* 20 */
|
||||
0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37, 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, /* 30 */
|
||||
0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47, 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f, /* 40 */
|
||||
0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57, 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f, /* 50 */
|
||||
0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67, 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f, /* 60 */
|
||||
0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77, 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f, /* 70 */
|
||||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, 0x88,0x89,0x8a,0x8b,0x48,0x8d,0x8e,0x8f, /* 80 */
|
||||
/*x*/
|
||||
0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97, 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f, /* 90 */
|
||||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7, 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf, /* a0 */
|
||||
0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7, 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf, /* b0 */
|
||||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7, 0xc8,0xc9,0xca,0xea,0xcc,0xcd,0xce,0xcf, /* c0 */
|
||||
/*x*/
|
||||
0xd0,0xd1,0xd2,0xd3,0xd4,0xd5,0xd6,0xd7, 0xd8,0xd9,0xda,0xdb,0xdc,0xdd,0xde,0xdf, /* d0 */
|
||||
0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7, 0xe8,0xe9,0xea,0xeb,0xec,0xed,0x33,0xef, /* e0 */
|
||||
/*x*/
|
||||
0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7, 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff, /* f0 */
|
||||
};
|
||||
|
||||
static const nec_config ts007spy_vfive_config ={ ts007spy_vfive_decryption_table, };
|
||||
|
||||
|
||||
static MACHINE_DRIVER_START( vfive )
|
||||
|
||||
@ -3818,11 +3950,9 @@ static MACHINE_DRIVER_START( vfive )
|
||||
MDRV_CPU_PROGRAM_MAP(vfive_68k_mem)
|
||||
MDRV_CPU_VBLANK_INT("screen", toaplan2_vblank_irq4)
|
||||
|
||||
#if USE_V25
|
||||
MDRV_CPU_ADD("audiocpu", V25, XTAL_20MHz/2) /* Verified on pcb, NEC V25+ type Toaplan mark scratched out */
|
||||
MDRV_CPU_PROGRAM_MAP(V25_rambased_mem)
|
||||
//MDRV_CPU_IO_MAP(V25_port)
|
||||
#endif
|
||||
MDRV_CPU_CONFIG(ts007spy_vfive_config)
|
||||
|
||||
MDRV_MACHINE_RESET(vfive)
|
||||
|
||||
@ -3851,11 +3981,11 @@ MACHINE_DRIVER_END
|
||||
|
||||
static MACHINE_RESET(batsugun)
|
||||
{
|
||||
#if USE_V25
|
||||
cpu_set_input_line(sub_cpu, INPUT_LINE_HALT, ASSERT_LINE);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
|
||||
static void batsugun_ym2151_irqhandler(const device_config *device, int linestate)
|
||||
{
|
||||
logerror("batsugun_ym2151_irqhandler %02x\n",linestate);
|
||||
@ -3867,6 +3997,29 @@ static const ym2151_interface batsugun_ym2151_interface =
|
||||
batsugun_ym2151_irqhandler
|
||||
};
|
||||
|
||||
/* the batsugun cpu is mostly non-encrypted, from a glance over the code it seems they
|
||||
only encrypted a few opcodes used in the interrupt routine, the rest is a 1:1 mapping */
|
||||
const UINT8 ts007spy_decryption_table[256] = {
|
||||
0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f, /* 00 */
|
||||
0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f, /* 10 */
|
||||
0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27, 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f, /* 20 */
|
||||
0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37, 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, /* 30 */
|
||||
0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47, 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f, /* 40 */
|
||||
0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57, 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f, /* 50 */
|
||||
0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67, 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f, /* 60 */
|
||||
0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77, 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f, /* 70 */
|
||||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f, /* 80 */
|
||||
0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97, 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f, /* 90 */
|
||||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7, 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf, /* a0 */
|
||||
0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7, 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf, /* b0 */
|
||||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7, 0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf, /* c0 */
|
||||
0xd0,0xd1,0xd2,0xd3,0xd4,0xd5,0xd6,0xd7, 0xd8,0xd9,0xda,0xdb,0xdc,0xdd,0xde,0xdf, /* d0 */
|
||||
0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7, 0xe8,0xe9,0xea,0xeb,0xec,0xed,0xee,0xef, /* e0 */
|
||||
0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7, 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff, /* f0 */
|
||||
};
|
||||
|
||||
static const nec_config ts007spy_config ={ ts007spy_decryption_table, };
|
||||
|
||||
static MACHINE_DRIVER_START( batsugun )
|
||||
|
||||
/* basic machine hardware */
|
||||
@ -3874,11 +4027,11 @@ static MACHINE_DRIVER_START( batsugun )
|
||||
MDRV_CPU_PROGRAM_MAP(batsugun_68k_mem)
|
||||
MDRV_CPU_VBLANK_INT("screen", toaplan2_vblank_irq4)
|
||||
|
||||
#if USE_V25
|
||||
MDRV_CPU_ADD("audiocpu", V25, XTAL_32MHz/2) /* NEC V25+ type Toaplan marked CPU ??? */
|
||||
MDRV_CPU_PROGRAM_MAP(V25_rambased_mem)
|
||||
MDRV_CPU_CONFIG(ts007spy_config)
|
||||
|
||||
//MDRV_CPU_IO_MAP(V25_port)
|
||||
#endif
|
||||
|
||||
MDRV_MACHINE_RESET(batsugun)
|
||||
|
||||
@ -4174,11 +4327,9 @@ ROM_START( tekipaki )
|
||||
ROM_LOAD16_BYTE( "tp020-1.bin", 0x000000, 0x010000, CRC(d8420bd5) SHA1(30c1ad9e053cd7e79adb42aa428ebee28e144755) )
|
||||
ROM_LOAD16_BYTE( "tp020-2.bin", 0x000001, 0x010000, CRC(7222de8e) SHA1(8352ae23efc24a2e20cc24b6d37cb8fc6b1a730c) )
|
||||
|
||||
#if USE_HD64x180
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound HD647180 code */
|
||||
/* sound CPU is a HD647180 (Z180) with internal ROM - not yet supported */
|
||||
ROM_LOAD( "hd647180.020", 0x00000, 0x08000, NO_DUMP )
|
||||
#endif
|
||||
|
||||
ROM_REGION( 0x100000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp020-4.bin", 0x000000, 0x080000, CRC(3ebbe41e) SHA1(cea196c5f83e1a23d5b538a0db9bbbffa7af5118) )
|
||||
@ -4191,11 +4342,9 @@ ROM_START( ghox ) /* Spinner with single axis (up/down) controls */
|
||||
ROM_LOAD16_BYTE( "tp021-01.u10", 0x000000, 0x020000, CRC(9e56ac67) SHA1(daf241d9e55a6e60fc004ed61f787641595b1e62) )
|
||||
ROM_LOAD16_BYTE( "tp021-02.u11", 0x000001, 0x020000, CRC(15cac60f) SHA1(6efa3a50a5dfe6ef4072738d6a7d0d95dca8a675) )
|
||||
|
||||
#if USE_HD64x180
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound HD647180 code */
|
||||
/* sound CPU is a HD647180 (Z180) with internal ROM - not yet supported */
|
||||
ROM_LOAD( "hd647180.021", 0x00000, 0x08000, NO_DUMP )
|
||||
#endif
|
||||
|
||||
ROM_REGION( 0x100000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp021-03.u36", 0x000000, 0x080000, CRC(a15d8e9d) SHA1(640a33997bdce8e84bea6a944139716379839037) )
|
||||
@ -4208,11 +4357,9 @@ ROM_START( ghoxj ) /* 8-way joystick for controls */
|
||||
ROM_LOAD16_BYTE( "tp021-01a.u10", 0x000000, 0x020000, CRC(c11b13c8) SHA1(da7defc1d3b6ddded910ba56c31fbbdb5ed57b09) )
|
||||
ROM_LOAD16_BYTE( "tp021-02a.u11", 0x000001, 0x020000, CRC(8d426767) SHA1(1ed4a8bcbf4352257e7d58cb5c2c91eb48c2f047) )
|
||||
|
||||
#if USE_HD64x180
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound HD647180 code */
|
||||
/* sound CPU is a HD647180 (Z180) with internal ROM - not yet supported */
|
||||
ROM_LOAD( "hd647180.021", 0x00000, 0x08000, NO_DUMP )
|
||||
#endif
|
||||
|
||||
ROM_REGION( 0x100000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp021-03.u36", 0x000000, 0x080000, CRC(a15d8e9d) SHA1(640a33997bdce8e84bea6a944139716379839037) )
|
||||
@ -4225,11 +4372,7 @@ ROM_START( dogyuun )
|
||||
ROM_LOAD16_WORD_SWAP( "tp022_01.r16", 0x000000, 0x080000, CRC(79eb2429) SHA1(088c5ed0ed77557ab71f52cafe35028e3648ae1e) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-002-MACH TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp022.mcu", 0x00000, 0x08000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (encrypted program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x200000, "gfx1", 0 )
|
||||
ROM_LOAD16_WORD_SWAP( "tp022_3.w92", 0x000000, 0x100000, CRC(191b595f) SHA1(89344946daa18087cc83f92027cf5da659b1c7a5) )
|
||||
@ -4249,11 +4392,7 @@ ROM_START( dogyuunk )
|
||||
ROM_LOAD16_WORD_SWAP( "01.u64", 0x000000, 0x080000, CRC(fe5bd7f4) SHA1(9c725466112a514c9ed0fb074422d291c175c3f4) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-002-MACH TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp022.mcu", 0x00000, 0x08000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (encrypted program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x200000, "gfx1", 0 )
|
||||
ROM_LOAD16_WORD_SWAP( "tp022_3.w92", 0x000000, 0x100000, CRC(191b595f) SHA1(89344946daa18087cc83f92027cf5da659b1c7a5) )
|
||||
@ -4274,14 +4413,8 @@ ROM_START( kbash )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-004-Dash TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x88000, "cpu1", 0 ) /* Sound CPU code */
|
||||
ROM_LOAD( "kbash02.bin", 0x80000, 0x08000, CRC(4cd882a1) SHA1(7199a5c384918f775f0815e09c46b2a58141814a) )
|
||||
#else
|
||||
ROM_REGION( 0x08000, "user1", 0 )
|
||||
ROM_LOAD( "kbash02.bin", 0x00200, 0x07e00, CRC(4cd882a1) SHA1(7199a5c384918f775f0815e09c46b2a58141814a) )
|
||||
ROM_CONTINUE( 0x00000, 0x00200 )
|
||||
#endif
|
||||
ROM_REGION( 0x8000, "mcu", 0 ) /* Sound CPU code */
|
||||
ROM_LOAD( "kbash02.bin", 0x0000, 0x8000, CRC(4cd882a1) SHA1(7199a5c384918f775f0815e09c46b2a58141814a) )
|
||||
|
||||
ROM_REGION( 0x800000, "gfx1", 0 )
|
||||
ROM_LOAD( "kbash03.bin", 0x000000, 0x200000, CRC(32ad508b) SHA1(e473489beaf649d3e5236770eb043327e309850c) )
|
||||
@ -4420,11 +4553,7 @@ ROM_START( fixeight )
|
||||
ROM_LOAD16_WORD_SWAP( "tp-026-1", 0x000000, 0x080000, CRC(f7b1746a) SHA1(0bbea6f111b818bc9b9b2060af4fe900f37cf7f9) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-001-Turbo TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Secondary CPU code */
|
||||
// ROM_LOAD( "tp-026.mcu", 0x0000, 0x8000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (encrypted program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x400000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp-026-3", 0x000000, 0x200000, CRC(e5578d98) SHA1(280d2b716d955e767d311fc9596823852435b6d7) )
|
||||
@ -4501,11 +4630,7 @@ ROM_START( grindstm )
|
||||
ROM_LOAD16_WORD_SWAP( "01.bin", 0x000000, 0x080000, CRC(4923f790) SHA1(1c2d66b432d190d0fb6ac7ca0ec0687aea3ccbf4) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp027.mcu", 0x8000, 0x8000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (encrypted program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x200000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp027_02.bin", 0x000000, 0x100000, CRC(877b45e8) SHA1(b3ed8d8dbbe51a1919afc55d619d2b6771971493) )
|
||||
@ -4518,11 +4643,7 @@ ROM_START( grindstma )
|
||||
ROM_LOAD16_WORD_SWAP( "tp027-01.rom", 0x000000, 0x080000, CRC(8d8c0392) SHA1(824dde274c8bef8a87c54d8ccdda7f0feb8d11e1) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp027.mcu", 0x8000, 0x8000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (encrypted program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x200000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp027_02.bin", 0x000000, 0x100000, CRC(877b45e8) SHA1(b3ed8d8dbbe51a1919afc55d619d2b6771971493) )
|
||||
@ -4535,11 +4656,7 @@ ROM_START( vfive )
|
||||
ROM_LOAD16_WORD_SWAP( "tp027_01.bin", 0x000000, 0x080000, CRC(731d50f4) SHA1(794255d0a809cda9170f5bac473df9d7f0efdac8) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp027.mcu", 0x8000, 0x8000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (encrypted program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x200000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp027_02.bin", 0x000000, 0x100000, CRC(877b45e8) SHA1(b3ed8d8dbbe51a1919afc55d619d2b6771971493) )
|
||||
@ -4552,11 +4669,7 @@ ROM_START( batsugun )
|
||||
ROM_LOAD16_WORD_SWAP( "tp030_01.bin", 0x000000, 0x080000, CRC(3873d7dd) SHA1(baf6187d7d554cfcf4a86b63f07fc30df7ef84c9) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp030.mcu", 0x8000, 0x8000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (mostly unencrypted program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x400000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp030_3l.bin", 0x000000, 0x100000, CRC(3024b793) SHA1(e161db940f069279356fca2c5bf2753f07773705) )
|
||||
@ -4578,11 +4691,7 @@ ROM_START( batsuguna )
|
||||
ROM_LOAD16_WORD_SWAP( "tp030_1a.bin", 0x000000, 0x080000, CRC(cb1d4554) SHA1(ef31f24d77e1c13bdf5558a04a6253e2e3e6a790) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp030.mcu", 0x8000, 0x8000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (unencrypted(?) program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x400000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp030_3l.bin", 0x000000, 0x100000, CRC(3024b793) SHA1(e161db940f069279356fca2c5bf2753f07773705) )
|
||||
@ -4604,11 +4713,7 @@ ROM_START( batsugunsp )
|
||||
ROM_LOAD16_WORD_SWAP( "tp030-sp.u69", 0x000000, 0x080000, CRC(8072a0cd) SHA1(3a0a9cdf894926a16800c4882a2b00383d981367) )
|
||||
|
||||
/* Secondary CPU is a Toaplan marked chip, (TS-007-Spy TOA PLAN) */
|
||||
/* Its likely to be a NEC V25+ (PLCC94). */
|
||||
#if USE_V25
|
||||
ROM_REGION( 0x10000, "cpu1", 0 ) /* Sound CPU code */
|
||||
// ROM_LOAD( "tp030.mcu", 0x8000, 0x8000, NO_DUMP )
|
||||
#endif
|
||||
/* It's some kind of NEC V25+ (PLCC94). - (unencrypted(?) program uploaded by main CPU) */
|
||||
|
||||
ROM_REGION( 0x400000, "gfx1", 0 )
|
||||
ROM_LOAD( "tp030_3l.bin", 0x000000, 0x100000, CRC(3024b793) SHA1(e161db940f069279356fca2c5bf2753f07773705) )
|
||||
|
||||
Loading…
Reference in New Issue
Block a user