Cleanups and version bump

hash/cpc_cass.xml

@@ -3,7 +3,7 @@
 
 <!-- Amstrad CPC 464 / 464+ etc. Tapes -->
 
-<!-- 
+<!--
 
 List Revision History:
 
@@ -18,7 +18,7 @@ STILL TO DO:
 
 -->
 
-<!-- 
+<!--
 
 The following tapes have only been made available as separate data blocks and they need to be properly dumped.
 Please stick to using the floppy versions for the time being...
@@ -101,7 +101,7 @@ Please stick to using the floppy versions for the time being...
 
 -->
 
-<!-- 
+<!--
 
     Loading Instructions are documented in the <info> field below. Typically these consist, when the system has a disk drive
     (as the MESS drivers do have by default), in typing
@@ -109,16 +109,16 @@ Please stick to using the floppy versions for the time being...
     and then in typing
       run""
     and press return. The latter part can be replaced by using the CPC keyboard shortcut 'Ctrl' + the numeric keypad 'Enter'
-    (in both the real system and MESS, such shortcut is equivalent to the RUN"" command). 
+    (in both the real system and MESS, such shortcut is equivalent to the RUN"" command).
     Notice that the '|' key necessary for the former part is mapper to the key on the left of 'P' of your keyboard (corresponding
     to '{' in most English keyboards).
 
-    To start/stop the tape you can either use the emulation shortcuts for Tape Play and Tape Stop by default mapped to 
+    To start/stop the tape you can either use the emulation shortcuts for Tape Play and Tape Stop by default mapped to
-    'F2' and 'Shift'+'F2', or use the Tape Control options in the MESS internal menu, accessible by entering partial keyboard 
+    'F2' and 'Shift'+'F2', or use the Tape Control options in the MESS internal menu, accessible by entering partial keyboard
     mode (press 'Scroll Lock' on your keyboard) and then pressing 'TAB'.
 
     Notice that you can speed up the loading process by pressing the FFWD key (by default mapped to 'Insert' on  your keyboard)
-    or by unthrottling emulation until the tape is fully loaded. 
+    or by unthrottling emulation until the tape is fully loaded.
 
 -->
 
@@ -127,9 +127,9 @@ Please stick to using the floppy versions for the time being...
 <softwarelist name="cpc_cass" description="Amstrad CPC cassettes">
 
 
-<!-- 
+<!--
 
-  Games 
+  Games
 
 -->
 
@@ -450,7 +450,7 @@ Please stick to using the floppy versions for the time being...
 		<year>1985</year>
 		<publisher>Amsoft</publisher>
 		<info name="usage" value="Load with |TAPE and then RUN&quot;&quot;" />
-		<info name="alt_title" value="3D Boxkampf" />		<part name="cass1" interface="cpc_cass">
+		<info name="alt_title" value="3D Boxkampf" />       <part name="cass1" interface="cpc_cass">
 			<dataarea name="cass" size="58470">
 				<rom name="3d boxing (uk) (1985) [original] [tape].cdt" size="58470" crc="19182316" sha1="adc783a37568ae81fcaa3c7a0af80b08258c038c" offset="0" />
 			</dataarea>
@@ -30818,7 +30818,7 @@ Please stick to using the floppy versions for the time being...
 	<software name="saicombt" supported="no">
 		<description>Sai Combat (UK)</description>
 		<year>1986</year>
-		<publisher>Mirrorsoft / Silverbird</publisher>	<!-- Both releases contain the same tape! -->
+		<publisher>Mirrorsoft / Silverbird</publisher>  <!-- Both releases contain the same tape! -->
 		<info name="usage" value="Load with |TAPE and then RUN&quot;&quot;" />
 		<part name="cass1" interface="cpc_cass">
 			<dataarea name="cass" size="71691">
@@ -38331,7 +38331,7 @@ Please stick to using the floppy versions for the time being...
 			</dataarea>
 		</part>
 	</software>
-	
+
 	<software name="troglo" supported="no">
 		<description>Troglo (Spa)</description>
 		<year>1986</year>
@@ -43825,7 +43825,7 @@ Covertapes
 		<description>Advanced Lawnmowing Simulator (UK)</description>
 		<year>2010</year>
 		<publisher>&lt;homebrew&gt;</publisher>
-        <info name="developer" value="Devilmarkus" />
+		<info name="developer" value="Devilmarkus" />
 		<info name="usage" value="Load with |TAPE and then RUN&quot;&quot;" />
 		<part name="cass1" interface="cpc_cass">
 			<dataarea name="cass" size="27727">
@@ -43903,7 +43903,7 @@ Covertapes
 		<description>Blue Angel 69 (UK)</description>
 		<year>2010</year>
 		<publisher>&lt;homebrew&gt;</publisher>
-        <info name="developer" value="Kevin Thacker" />
+		<info name="developer" value="Kevin Thacker" />
 		<info name="usage" value="Load with |TAPE and then RUN&quot;&quot;" />
 		<part name="cass1" interface="cpc_cass">
 			<dataarea name="cass" size="81485">
@@ -43921,7 +43921,7 @@ Covertapes
 		<description>Breaking Baud Demo (UK)</description>
 		<year>2014</year>
 		<publisher>&lt;homebrew&gt;</publisher>
-        <info name="developer" value="Doz" />
+		<info name="developer" value="Doz" />
 		<info name="usage" value="Load with |TAPE and then RUN&quot;&quot;" />
 		<part name="cass1" interface="cpc_cass">
 			<dataarea name="cass" size="110186">
@@ -44147,7 +44147,7 @@ Covertapes
 		<description>Jetpac (UK, v1.1, Converted from ZX)</description>
 		<year>2014</year>
 		<publisher>&lt;homebrew&gt;</publisher>
-        <info name="developer" value="40CRISIS" />
+		<info name="developer" value="40CRISIS" />
 		<info name="usage" value="Load with |TAPE and then RUN&quot;&quot;" />
 		<part name="cass1" interface="cpc_cass">
 			<dataarea name="cass" size="18811">
@@ -44160,7 +44160,7 @@ Covertapes
 		<description>Jetpac (UK, Converted from ZX)</description>
 		<year>2014</year>
 		<publisher>&lt;homebrew&gt;</publisher>
-        <info name="developer" value="40CRISIS" />
+		<info name="developer" value="40CRISIS" />
 		<info name="usage" value="Load with |TAPE and then RUN&quot;&quot;" />
 		<part name="cass1" interface="cpc_cass">
 			<dataarea name="cass" size="18247">
@@ -44575,10 +44575,10 @@ Covertapes
 
 
 
-<!-- 
+<!--
+
+    Misc tapes not confirmed at CPC-Power
 
-	Misc tapes not confirmed at CPC-Power
-	
 -->
 
 

hash/msx1_cass.xml

@@ -3,11 +3,11 @@
 
 <softwarelist name="msx1_cass" description="MSX1 cassettes">
 <!--
-	TODO
+    TODO
-		Proper regions (TOSEC is VERY incorrect on this)
+        Proper regions (TOSEC is VERY incorrect on this)
-		Test TOSEC "bad" dumps, make sure they aren't marked wrong (and re-add them in case they are not bad)
+        Test TOSEC "bad" dumps, make sure they aren't marked wrong (and re-add them in case they are not bad)
-		Add images from "UnRenamed MSX"
+        Add images from "UnRenamed MSX"
-		Japanese alt titles
+        Japanese alt titles
 -->
 
 
@@ -87,7 +87,7 @@
 	</software>
 
 	<!-- Games -->
-	
+
 	<software name="genius">
 		<!-- listing printout published in Japan "POPCOM" '87/7 issue -->
 		<description>Genius (Jpn)</description>
@@ -215,7 +215,7 @@
 			<dataarea name="cass" size="32138">
 				<rom name="4x4 off-road racing (1988)(u.s. gold)(gb)(side a)[a][bload'cas-',r].cas" size="32138" crc="b9f3390f" sha1="b3bcd03ae18b44a71b7577306de88253d539c03f" offset="0" />
 			</dataarea>
-		</part>		
+		</part>
 		<part name="cass2" interface="msx_cass">
 			<feature name="part_id" value="Side B"/>
 			<dataarea name="cass" size="38434">
@@ -1710,7 +1710,7 @@
 		<year>1988</year>
 		<publisher>Eurosoft</publisher>
 		<info name="usage" value="Load with RUN&quot;CAS:&quot;"/>
-		
+
 		<part name="cass1" interface="msx_cass">
 			<dataarea name="cass" size="69176">
 				<rom name="blow up (1988)(eurosoft)(nl)[run'cas-'].cas" size="69176" crc="6771c9b1" sha1="bb002e82bc95b6226e26db2e0bb33dbdc309a93d" offset="0" />
@@ -1723,7 +1723,7 @@
 		<year>1988</year>
 		<publisher>Eurosoft</publisher>
 		<info name="usage" value="Load with RUN&quot;CAS:&quot;"/>
-		
+
 		<part name="cass1" interface="msx_cass">
 			<dataarea name="cass" size="56880">
 				<rom name="blow up (1988)(eurosoft)(nl)[a][run'cas-'].cas" size="56880" crc="c6e667c3" sha1="2322d52e266f30f4699eac6aae06b4dcabad168c" offset="0" />
@@ -2342,7 +2342,7 @@
 			</dataarea>
 		</part>
 	</software>
-	
+
 	<software name="camelot">
 		<description>Camelot Warriors (Spa)</description>
 		<year>1986</year>
@@ -9881,7 +9881,7 @@
 		</part>
 	</software>
 
-    <!-- 1st Edition? -->
+	<!-- 1st Edition? -->
 	<software name="nonamedb" cloneof="nonamed">
 		<description>Nonamed (Spa, Alt 2)</description>
 		<year>1986</year>
@@ -12796,7 +12796,7 @@
 		</part>
 	</software>
 
-	<software name="smugglrs">	<!-- requires gunstick -->
+	<software name="smugglrs">  <!-- requires gunstick -->
 		<description>Space Smugglers (Spa)</description>
 		<year>1989</year>
 		<publisher>MHT Ingenieros</publisher>
@@ -15124,7 +15124,7 @@
 			<dataarea name="cass" size="52208">
 				<rom name="winter events (1987)(anco software)(gb)(side b)[martos].cas" size="52208" crc="5e34d1f8" sha1="cf87f620d15a16f4fda690110cd0cdc92e179b5a" offset="0" />
 			</dataarea>
-		</part>		
+		</part>
 	</software>
 
 	<software name="wingames">
@@ -15394,7 +15394,7 @@
 		<year>1985</year>
 		<publisher>Mr. Micro</publisher>
 		<info name="usage" value="Load with BLOAD&quot;CAS:&quot;,R"/>
-		
+
 		<part name="cass1" interface="msx_cass">
 			<dataarea name="cass" size="63472">
 				<rom name="zakil wood (1985)(mr. micro)[bload'cas-',r].cas" size="63472" crc="d49d41df" sha1="bb9c4e1dcecc27bc5ef35705a4abac48d63119e6" offset="0" />
@@ -15407,7 +15407,7 @@
 		<year>1987</year>
 		<publisher>Eaglesoft</publisher>
 		<info name="usage" value="Load with RUN&quot;CAS:&quot;"/>
-		
+
 		<part name="cass1" interface="msx_cass">
 			<dataarea name="cass" size="34616">
 				<rom name="zanac (1987)(eaglesoft)(nl)[run'cas-'].cas" size="34616" crc="33ac6012" sha1="0a40388be3878ed654898869a78de40d694b2ad8" offset="0" />

hash/msx2p_flop.xml

@@ -3,19 +3,19 @@
 
 <softwarelist name="msx2p_flop" description="MSX2+ floppies">
 
-<!-- 
+<!--
 
 Disks to sort:
     EVA Player for Sunrise ATA-IDE
 
 -->
 
-<!-- 
+<!--
 
 Known undumped:
     Destiny-1
     NBX 3.2
-    Super Zeologue 
+    Super Zeologue
     Shuumatsunosugoshikata / The world is drawing to an W/end
     Doozle (Dutch tool)
     Mouse Master ( http://www.generation-msx.nl/software/msx-club-gouda/mouse-master/release/2542/ )

hash/msxr_flop.xml

@@ -3,7 +3,7 @@
 
 <softwarelist name="msxr_flop" description="MSX Turbo-R floppies">
 
-<!-- 
+<!--
 
 Disks to sort:
     Win2000 installer by Italo Valerio
@@ -12,11 +12,11 @@ Disks to sort:
     Telebasic - Issue 01
     XSC Compression Program
     MSX-DOS Help by Miri Software
-    GFX9000 Tool Disk 
+    GFX9000 Tool Disk
 
 -->
 
-<!-- 
+<!--
 
 Known undumped:
     pure v1.22 PCM editor

hash/n64dd.xml

@@ -22,7 +22,7 @@
 		<info name="usage" value="Requires F-Zero X cart" />
 		<info name="serial" value="NUD-EFZJ-JPN" />
 		<info name="release" value="20000421" />
-        <info name="alt_title" value="エフ　ゼロ　エックス　エクスパンションキット" />
+		<info name="alt_title" value="エフ　ゼロ　エックス　エクスパンションキット" />
 		<part name="disk" interface="n64dd_disk">
 			<dataarea name="rom" size="70627520">
 				<rom name="f-zero x expansion kit [nud-efzj-jpn].bin" size="70627520" crc="9ab91e71" sha1="7b39677dad61b2fb91eb2ede756fbd3b49f15afe" offset="0" />

hash/nes.xml

@@ -52494,7 +52494,7 @@ preliminary proto for the PAL version, still running on NTSC systems) or the gfx
 		<publisher>Caltron</publisher>
 		<part name="cart" interface="nes_cart">
 			<feature name="slot" value="cnrom" />
-			<feature name="pcb" value="NES-CNROM" />	<!-- NTDEC-N71506x ? -->
+			<feature name="pcb" value="NES-CNROM" />    <!-- NTDEC-N71506x ? -->
 			<feature name="mirroring" value="horizontal" />
 			<dataarea name="chr" size="16384">
 				<rom name="adam &amp; eve (megasoft).chr" size="16384" crc="61cfe60d" sha1="d234813a34bdd8ef94ec63851c199e0c669ea1e3" offset="00000" status="baddump" />

src/emu/bus/a800/a800_slot.c

@@ -62,7 +62,7 @@ device_a800_cart_interface::~device_a800_cart_interface ()
 void device_a800_cart_interface::rom_alloc(UINT32 size, const char *tag)
 {
 	if (m_rom == NULL)
-	{		
+	{
 		m_rom = device().machine().memory().region_alloc(std::string(tag).append(A800SLOT_ROM_REGION_TAG).c_str(), size, 1, ENDIANNESS_LITTLE)->base();
 		m_rom_size = size;
 

src/emu/bus/abcbus/abc890.h

@@ -26,7 +26,7 @@
 // ======================> abc890_t
 
 class abc890_t :  public device_t,
-				  public device_abcbus_card_interface
+					public device_abcbus_card_interface
 {
 public:
 	// construction/destruction

src/emu/bus/abcbus/fd2.c

@@ -100,7 +100,7 @@ WRITE8_MEMBER( abc_fd2_t::status_w )
 	    3
 	    4
 	    5
-	    6       
+	    6
 	    7
 
 	*/
@@ -154,11 +154,11 @@ READ8_MEMBER( abc_fd2_t::pio_pb_r )
 
 	    bit     description
 
-	    0       
+	    0
-	    1       
+	    1
-	    2       
+	    2
-	    3       
+	    3
-	    4       
+	    4
 	    5       DRQ
 	    6       HLD
 	    7       INTRQ
@@ -185,9 +185,9 @@ WRITE8_MEMBER( abc_fd2_t::pio_pb_w )
 	    2       TG43
 	    3       MON
 	    4       HLT
-	    5       
+	    5
-	    6       
+	    6
-	    7       
+	    7
 
 	*/
 

src/emu/bus/abcbus/fd2.h

@@ -31,7 +31,7 @@
 // ======================> abc_fd2_t
 
 class abc_fd2_t :  public device_t,
-				   public device_abcbus_card_interface
+					public device_abcbus_card_interface
 {
 public:
 	// construction/destruction

src/emu/bus/abcbus/lux4105.h

@@ -36,7 +36,7 @@
 // ======================> luxor_4105_device
 
 class luxor_4105_device :  public device_t,
-						   public device_abcbus_card_interface
+							public device_abcbus_card_interface
 {
 public:
 	// construction/destruction

src/emu/bus/abcbus/memcard.h

@@ -26,7 +26,7 @@
 // ======================> abc_memory_card_t
 
 class abc_memory_card_t :  public device_t,
-						   public device_abcbus_card_interface
+							public device_abcbus_card_interface
 {
 public:
 	// construction/destruction

src/emu/bus/abcbus/ram.h

@@ -26,7 +26,7 @@
 // ======================> abc80_16kb_ram_card_t
 
 class abc80_16kb_ram_card_t :  public device_t,
-						   	   public device_abcbus_card_interface
+								public device_abcbus_card_interface
 {
 public:
 	// construction/destruction

src/emu/bus/arcadia/slot.c

@@ -48,7 +48,7 @@ device_arcadia_cart_interface::~device_arcadia_cart_interface()
 void device_arcadia_cart_interface::rom_alloc(UINT32 size, const char *tag)
 {
 	if (m_rom == NULL)
-	{		
+	{
 		m_rom = device().machine().memory().region_alloc(std::string(tag).append(EA2001SLOT_ROM_REGION_TAG).c_str(), size, 1, ENDIANNESS_LITTLE)->base();
 		m_rom_size = size;
 	}

src/emu/bus/cbmiec/c1541.c

@@ -336,7 +336,7 @@ ROM_END
 
 const rom_entry *fsd1_device::device_rom_region() const
 {
-    return ROM_NAME( fsd1 );
+	return ROM_NAME( fsd1 );
 }
 
 
@@ -353,8 +353,8 @@ ROM_START( fsd2 )
 	ROMX_LOAD( "fsd2b.u3", 0x0000, 0x4000, CRC(b39e4600) SHA1(991132fcc6e70e9a428062ae76055a150f2f7ac6), ROM_BIOS(2) )
 	ROM_SYSTEM_BIOS( 2, "jiffydos", "JiffyDOS v5.0" )
 	ROMX_LOAD( "jiffydos v5.0.u3", 0x0000, 0x4000, CRC(46c3302c) SHA1(e3623658cb7af30c9d3bce2ba3b6ad5ee89ac1b8), ROM_BIOS(3) )
-    ROM_SYSTEM_BIOS( 3, "rexdos", "REX-DOS" )
+	ROM_SYSTEM_BIOS( 3, "rexdos", "REX-DOS" )
-    ROMX_LOAD( "rdos.bin", 0x0000, 0x4000, CRC(8ad6dba1) SHA1(f279d327d5e16ea1b62fb18514fb679d0b442941), ROM_BIOS(4) )
+	ROMX_LOAD( "rdos.bin", 0x0000, 0x4000, CRC(8ad6dba1) SHA1(f279d327d5e16ea1b62fb18514fb679d0b442941), ROM_BIOS(4) )
 ROM_END
 
 
@@ -475,7 +475,7 @@ ROM_END
 
 const rom_entry *indus_gt_t::device_rom_region() const
 {
-    return ROM_NAME( indusgt );
+	return ROM_NAME( indusgt );
 }
 
 
@@ -1064,7 +1064,7 @@ sx1541_device::sx1541_device(const machine_config &mconfig, const char *tag, dev
 //-------------------------------------------------
 
 fsd1_device::fsd1_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock)
-    : base_c1541_device(mconfig, FSD1, "FSD-1", tag, owner, clock, "fsd1", __FILE__) { }
+	: base_c1541_device(mconfig, FSD1, "FSD-1", tag, owner, clock, "fsd1", __FILE__) { }
 
 
 //-------------------------------------------------

src/emu/bus/gameboy/gb_slot.h

@@ -69,7 +69,7 @@ public:
 	void rom_map_setup(UINT32 size);
 	void ram_map_setup(UINT8 banks);
 
-	virtual void set_additional_wirings(UINT8 mask, int shift) { }	// MBC-1 will then overwrite this!
+	virtual void set_additional_wirings(UINT8 mask, int shift) { }  // MBC-1 will then overwrite this!
 	void set_has_timer(bool val) { has_timer = val; }
 	void set_has_rumble(bool val) { has_rumble = val; }
 	void set_has_battery(bool val) { has_battery = val; }

src/emu/bus/gameboy/mbc.c

@@ -25,7 +25,7 @@ const device_type GB_ROM_MBC7 = &device_creator<gb_rom_mbc7_device>;
 const device_type GB_ROM_M161_M12 = &device_creator<gb_rom_m161_device>;
 const device_type GB_ROM_MMM01 = &device_creator<gb_rom_mmm01_device>;
 const device_type GB_ROM_SACHEN1 = &device_creator<gb_rom_sachen1_device>;
-const device_type GB_ROM_SACHEN2 = &device_creator<gb_rom_sachen1_device>;	// Just a placeholder for the moment...
+const device_type GB_ROM_SACHEN2 = &device_creator<gb_rom_sachen1_device>;  // Just a placeholder for the moment...
 const device_type GB_ROM_188IN1 = &device_creator<gb_rom_188in1_device>;
 const device_type GB_ROM_SINTAX = &device_creator<gb_rom_sintax_device>;
 const device_type GB_ROM_CHONGWU = &device_creator<gb_rom_chongwu_device>;
@@ -322,18 +322,18 @@ WRITE8_MEMBER(gb_rom_mbc1_device::write_bank)
 	// the mapper only uses inputs A13-A15
 	switch (offset & 0xe000)
 	{
-		case 0x0000:	// RAM Enable Register
+		case 0x0000:    // RAM Enable Register
 			m_ram_enable = ((data & 0x0f) == 0x0a) ? 1 : 0;
 			break;
-		case 0x2000:	// ROM Bank Register
+		case 0x2000:    // ROM Bank Register
 			data &= 0x1f;
 			m_latch_bank2 = data ? data : 1;
 			m_latch_bank2 &= m_mask;
 			break;
-		case 0x4000:	// RAM Bank Register
+		case 0x4000:    // RAM Bank Register
 			m_ram_bank = data & 0x3;
 			break;
-		case 0x6000:	// MBC1 Mode Register
+		case 0x6000:    // MBC1 Mode Register
 		default:
 			m_mode = (data & 0x1) ? MODE_4M_256k : MODE_16M_8k;
 			break;
@@ -647,10 +647,10 @@ WRITE8_MEMBER(gb_rom_m161_device::write_bank)
 {
 	switch (offset & 0xe000)
 	{
-		case 0x4000:	// Base Bank Register
+		case 0x4000:    // Base Bank Register
 			m_base_bank = data << 1;
 			break;
-		case 0x2000:	// Tetris writes 1 here when selected...
+		case 0x2000:    // Tetris writes 1 here when selected...
 		default:
 			break;
 	}
@@ -715,18 +715,18 @@ READ8_MEMBER(gb_rom_sachen1_device::read_rom)
 
 WRITE8_MEMBER(gb_rom_sachen1_device::write_bank)
 {
-	if (offset < 0x2000)	// Base ROM Bank register
+	if (offset < 0x2000)    // Base ROM Bank register
 	{
 		if ((m_latch_bank2 & 0x30) == 0x30 && data)
 			m_base_bank = data & 0x0f;
 		//logerror("write to base bank %X - %X\n", data, (m_base_bank & m_mask) | (m_latch_bank2 & ~m_mask));
 	}
-	else if (offset < 0x4000)	// ROM Bank Register
+	else if (offset < 0x4000)   // ROM Bank Register
 	{
 		m_latch_bank2 = data ? data : 1;
 		//logerror("write to latch %X - %X\n", data, (m_base_bank & m_mask) | (m_latch_bank2 & ~m_mask));
 	}
-	else if (offset < 0x6000)	// ROM bank mask register
+	else if (offset < 0x6000)   // ROM bank mask register
 	{
 		if ((m_latch_bank2 & 0x30) == 0x30)
 			m_mask = data;

src/emu/bus/gameboy/mbc.h

@@ -33,12 +33,12 @@ public:
 class gb_rom_mbc1_device : public gb_rom_mbc_device
 {
 public:
-	
+
 	enum {
 		MODE_16M_8k  = 0, /// 16Mbit ROM, 8kBit RAM
 		MODE_4M_256k = 1, /// 4Mbit ROM, 256kBit RAM
 	};
-	
+
 	// construction/destruction
 	gb_rom_mbc1_device(const machine_config &mconfig, device_type type, const char *name, const char *tag, device_t *owner, UINT32 clock, const char *shortname, const char *source);
 	gb_rom_mbc1_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock);
@@ -46,7 +46,7 @@ public:
 	// device-level overrides
 	virtual void device_start() { shared_start(); save_item(NAME(m_mode)); };
 	virtual void device_reset() { shared_reset(); m_mode = MODE_16M_8k; };
-	virtual void set_additional_wirings(UINT8 mask, int shift) { m_mask = mask; m_shift = shift; }	// these get set at cart loading
+	virtual void set_additional_wirings(UINT8 mask, int shift) { m_mask = mask; m_shift = shift; }  // these get set at cart loading
 
 	virtual DECLARE_READ8_MEMBER(read_rom);
 	virtual DECLARE_WRITE8_MEMBER(write_bank);
@@ -156,19 +156,19 @@ public:
 class gb_rom_m161_device : public gb_rom_mbc_device
 {
 public:
-	
+
 	// construction/destruction
 	gb_rom_m161_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock);
-	
+
 	// device-level overrides
 	virtual void device_start();
 	virtual void device_reset();
-	
+
 	virtual DECLARE_READ8_MEMBER(read_rom);
 	virtual DECLARE_WRITE8_MEMBER(write_bank);
 	virtual DECLARE_READ8_MEMBER(read_ram) { return 0xff; }
 	virtual DECLARE_WRITE8_MEMBER(write_ram) { }
-	
+
 	UINT8 m_base_bank;
 };
 
@@ -194,19 +194,19 @@ public:
 class gb_rom_sachen1_device : public gb_rom_mbc1_device
 {
 public:
-	
+
 	// construction/destruction
 	gb_rom_sachen1_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock);
-	
+
 	// device-level overrides
 	virtual void device_start();
 	virtual void device_reset();
-	
+
 	virtual DECLARE_READ8_MEMBER(read_rom);
 	virtual DECLARE_WRITE8_MEMBER(write_bank);
 	virtual DECLARE_READ8_MEMBER(read_ram) { return 0xff; }
 	virtual DECLARE_WRITE8_MEMBER(write_ram) { }
-	
+
 	UINT8 m_base_bank, m_mask;
 };
 

src/emu/bus/ieee488/c2040.c

@@ -11,29 +11,29 @@
 
 /*
 
-	2040/3040 disk initialization
+    2040/3040 disk initialization
-	-----------------------------
+    -----------------------------
-	You need to initialize each diskette before trying to access it
+    You need to initialize each diskette before trying to access it
-	or you will get a DISK ID MISMATCH error upon disk commands.
+    or you will get a DISK ID MISMATCH error upon disk commands.
-	On the 4040 this is done automatically by the DOS.
+    On the 4040 this is done automatically by the DOS.
 
-	open 15,8,15:print 15,"i":close 15
+    open 15,8,15:print 15,"i":close 15
 
-	List directory
+    List directory
-	--------------
+    --------------
-	directory / diR
+    directory / diR
 
-	Format disk
+    Format disk
-	-----------
+    -----------
-	header "label,id",d0,i01
+    header "label,id",d0,i01
 
-	Load file
+    Load file
-	---------
+    ---------
-	dload "name" / dL"name
+    dload "name" / dL"name
 
-	Save file
+    Save file
-	---------
+    ---------
-	dsave "name" / dS"name
+    dsave "name" / dS"name
 
 */
 

src/emu/bus/ieee488/c2040fdc.c

@@ -11,7 +11,7 @@
 
 /*
 
-	TODO:
+    TODO:
 
     - write protect
     - separate read/write methods

src/emu/bus/ieee488/c8050.h

@@ -32,7 +32,7 @@
 // ======================> c8050_device
 
 class c8050_device :  public device_t,
-					  public device_ieee488_interface
+						public device_ieee488_interface
 {
 public:
 	// construction/destruction
@@ -53,7 +53,7 @@ public:
 	DECLARE_WRITE8_MEMBER( via_pb_w );
 	DECLARE_READ8_MEMBER( pi_r );
 	DECLARE_WRITE8_MEMBER( pi_w );
-	
+
 	DECLARE_FLOPPY_FORMATS( floppy_formats );
 
 protected:

src/emu/bus/ieee488/c8050fdc.c

@@ -11,7 +11,7 @@
 
 /*
 
-	TODO:
+    TODO:
 
     - write protect
     - 75,format speed error,01,00,0
@@ -221,7 +221,7 @@ void c8050_fdc_t::ds_w(int ds)
 void c8050_fdc_t::set_floppy(floppy_connector *floppy0, floppy_connector *floppy1)
 {
 	m_floppy0 = floppy0->get_device();
-	
+
 	if (floppy1) {
 		m_floppy1 = floppy1->get_device();
 	}

src/emu/bus/ieee488/c8280.c

@@ -477,12 +477,12 @@ READ8_MEMBER( c8280_device::fk5_r )
 
 	    bit     description
 
-	    0       
+	    0
-	    1       
+	    1
-	    2       
+	    2
 	    3       DCHG
 	    4       TSID
-	    5       
+	    5
 	    6       0
 	    7       0
 

src/emu/bus/ieee488/c8280.h

@@ -30,7 +30,7 @@
 // ======================> c8280_device
 
 class c8280_device :  public device_t,
-					  public device_ieee488_interface
+						public device_ieee488_interface
 {
 public:
 	// construction/destruction

src/emu/bus/isa/svga_cirrus.c

@@ -93,7 +93,7 @@ void isa16_svga_cirrus_device::device_reset()
 
 
 /*
-	Generic CL-GD542x video card
+    Generic CL-GD542x video card
 */
 
 ROM_START( clgd542x )

src/emu/bus/nes/nes_pcb.inc

@@ -313,7 +313,7 @@ static const nes_pcb pcb_list[] =
 	{ "bmc_hik_kof",      UNSUPPORTED_BOARD },
 	{ "onebus",           UNSUPPORTED_BOARD },
 	{ "coolboy",          UNSUPPORTED_BOARD },
-	{ "btl_900218",       UNSUPPORTED_BOARD },	// pirate The Lord of King, to be emulated soon
+	{ "btl_900218",       UNSUPPORTED_BOARD },  // pirate The Lord of King, to be emulated soon
 	{ "a9746",            UNSUPPORTED_BOARD },
 	{ "dance2k",          UNSUPPORTED_BOARD },
 	{ "pec586",           UNSUPPORTED_BOARD },

src/emu/bus/nubus/nubus_specpdq.c

@@ -83,7 +83,7 @@ const rom_entry *nubus_specpdq_device::device_rom_region() const
 nubus_specpdq_device::nubus_specpdq_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock) :
 		device_t(mconfig, NUBUS_SPECPDQ, "SuperMac Spectrum PDQ video card", tag, owner, clock, "nb_spdq", __FILE__),
 		device_video_interface(mconfig, *this),
-		device_nubus_card_interface(mconfig, *this),		
+		device_nubus_card_interface(mconfig, *this),
 		m_palette(*this, "palette")
 {
 	m_assembled_tag = std::string(tag).append(":").append(SPECPDQ_SCREEN_NAME);

src/emu/bus/nubus/pds30_mc30.c

@@ -65,7 +65,7 @@ const rom_entry *nubus_xceedmc30_device::device_rom_region() const
 nubus_xceedmc30_device::nubus_xceedmc30_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock) :
 		device_t(mconfig, PDS030_XCEEDMC30, "Micron/XCEED Technology MacroColor 30", tag, owner, clock, "pd3_mclr", __FILE__),
 		device_video_interface(mconfig, *this),
-		device_nubus_card_interface(mconfig, *this)		
+		device_nubus_card_interface(mconfig, *this)
 {
 	m_assembled_tag = std::string(tag).append(":").append(XCEEDMC30_SCREEN_NAME);
 	m_screen_tag = m_assembled_tag.c_str();

src/emu/bus/nubus/pds30_procolor816.c

@@ -68,7 +68,7 @@ const rom_entry *nubus_procolor816_device::device_rom_region() const
 nubus_procolor816_device::nubus_procolor816_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock) :
 		device_t(mconfig, PDS030_PROCOLOR816, "Lapis ProColor Server 8*16", tag, owner, clock, "pd3_pc16", __FILE__),
 		device_video_interface(mconfig, *this),
-		device_nubus_card_interface(mconfig, *this)		
+		device_nubus_card_interface(mconfig, *this)
 {
 	m_assembled_tag = std::string(tag).append(":").append(PROCOLOR816_SCREEN_NAME);
 	m_screen_tag = m_assembled_tag.c_str();

src/emu/bus/ti99_peb/hfdc.c

@@ -74,7 +74,7 @@
 #define CLK_ADDR    0x0fe0
 #define RAM_ADDR    0x1000
 
-#define TRACE_EMU 1 
+#define TRACE_EMU 1
 #define TRACE_CRU 0
 #define TRACE_COMP 0
 #define TRACE_RAM 0
@@ -574,15 +574,15 @@ void myarc_hfdc_device::signal_drive_status()
 		if ((m_current_floppy != NULL) && (!m_current_floppy->trk00_r()))
 			reply |= HDC_DS_TRK00;
 	}
-	else 
+	else
 	{
 		if ((m_output1_latch & 0xe0)!=0)
 		{
 			if (m_current_harddisk != NULL)
 			{
-				if (m_current_harddisk->ready_r()==ASSERT_LINE) 
+				if (m_current_harddisk->ready_r()==ASSERT_LINE)
 				{
-					m_status_latch |= HDC_DS_READY;	
+					m_status_latch |= HDC_DS_READY;
 					set_bits(m_status_latch, HDC_DS_SKCOM, m_current_harddisk->seek_complete_r()==ASSERT_LINE);
 					set_bits(m_status_latch, HDC_DS_TRK00, m_current_harddisk->trk00_r()==ASSERT_LINE);
 				}
@@ -632,13 +632,13 @@ WRITE8_MEMBER( myarc_hfdc_device::auxbus_out )
 
 		m_output1_latch = data;
 
-		if ((data & 0x10) != 0) connect_floppy_unit(bit_to_index(data & 0x0f)); 			// Floppy selected
+		if ((data & 0x10) != 0) connect_floppy_unit(bit_to_index(data & 0x0f));             // Floppy selected
 		else
 		{
 			index = bit_to_index((data>>4) & 0x0f);
 
-			if (index > 0) connect_harddisk_unit(index-1);  // HD selected; index >= 1  
+			if (index > 0) connect_harddisk_unit(index-1);  // HD selected; index >= 1
-			else 
+			else
 			{
 				disconnect_floppy_drives();
 				disconnect_hard_drives();
@@ -668,7 +668,7 @@ WRITE8_MEMBER( myarc_hfdc_device::auxbus_out )
 			m_current_floppy->dir_w((data & 0x20)==0);
 			m_current_floppy->stp_w((data & 0x10)==0);
 		}
-		
+
 		if (m_current_harddisk != NULL)
 		{
 			// Dir = 0 -> outward
@@ -695,10 +695,10 @@ void myarc_hfdc_device::connect_floppy_unit(int index)
 	{
 		disconnect_floppy_drives();
 		if (TRACE_LINES) logerror("%s: Select floppy drive DSK%d\n", tag(), index+1);
-		
+
 		// Connect new drive
 		m_current_floppy = m_floppy_unit[index];
-		
+
 		// We don't use the READY line of floppy drives.
 		// READY is asserted when DSKx = 1
 		// The controller fetches the state with the auxbus access
@@ -709,8 +709,8 @@ void myarc_hfdc_device::connect_floppy_unit(int index)
 			logerror("%s: Connection to DSK%d failed because no drive is connected\n", tag(), index+1);
 		m_hdc9234->connect_floppy_drive(m_floppy_unit[index]);
 	}
-	
+
-	// We can only run a floppy or a harddisk at a time, not both 
+	// We can only run a floppy or a harddisk at a time, not both
 	disconnect_hard_drives();
 }
 
@@ -720,10 +720,10 @@ void myarc_hfdc_device::connect_harddisk_unit(int index)
 	{
 		disconnect_hard_drives();
 		if (TRACE_LINES) logerror("%s: Select hard disk WDS%d\n", tag(), index+1);
-		
+
 		// Connect new drive
 		m_current_harddisk = m_harddisk_unit[index];
-		
+
 		if (TRACE_LINES) logerror("%s: Connect index callback WDS%d\n", tag(), index+1);
 		if (m_current_harddisk != NULL)
 		{
@@ -735,7 +735,7 @@ void myarc_hfdc_device::connect_harddisk_unit(int index)
 		m_hdc9234->connect_hard_drive(m_current_harddisk);
 	}
 
-	// We can only run a floppy or a harddisk at a time, not both 
+	// We can only run a floppy or a harddisk at a time, not both
 	disconnect_floppy_drives();
 }
 
@@ -756,7 +756,7 @@ void myarc_hfdc_device::disconnect_hard_drives()
 	if (m_current_harddisk != NULL)
 	{
 		m_current_harddisk->setup_index_pulse_cb(mfm_harddisk_device::index_pulse_cb());
-		m_current_harddisk->setup_seek_complete_cb(mfm_harddisk_device::seek_complete_cb());		
+		m_current_harddisk->setup_seek_complete_cb(mfm_harddisk_device::seek_complete_cb());
 		m_current_harddisk = NULL;
 	}
 }
@@ -917,15 +917,15 @@ void myarc_hfdc_device::device_config_complete()
 		m_harddisk_unit[i] = NULL;
 	}
 	m_floppy_unit[3] = NULL;
-	
+
 	// Seems to be null when doing a "-listslots"
-	if (subdevice("f1")!=NULL) 
+	if (subdevice("f1")!=NULL)
 	{
 		m_floppy_unit[0] = static_cast<floppy_connector*>(subdevice("f1"))->get_device();
 		m_floppy_unit[1] = static_cast<floppy_connector*>(subdevice("f2"))->get_device();
 		m_floppy_unit[2] = static_cast<floppy_connector*>(subdevice("f3"))->get_device();
 		m_floppy_unit[3] = static_cast<floppy_connector*>(subdevice("f4"))->get_device();
-		
+
 		m_harddisk_unit[0] = static_cast<mfm_harddisk_connector*>(subdevice("h1"))->get_device();
 		m_harddisk_unit[1] = static_cast<mfm_harddisk_connector*>(subdevice("h2"))->get_device();
 		m_harddisk_unit[2] = static_cast<mfm_harddisk_connector*>(subdevice("h3"))->get_device();
@@ -993,8 +993,8 @@ static SLOT_INTERFACE_START( hfdc_floppies )
 SLOT_INTERFACE_END
 
 static SLOT_INTERFACE_START( hfdc_harddisks )
-	SLOT_INTERFACE( "generic", MFM_HD_GENERIC )		// Generic high-level emulation
+	SLOT_INTERFACE( "generic", MFM_HD_GENERIC )     // Generic high-level emulation
-//	SLOT_INTERFACE( "seagatemfm", MFM_HD_SEAGATE )        // Seagate ST-225 and others
+//  SLOT_INTERFACE( "seagatemfm", MFM_HD_SEAGATE )        // Seagate ST-225 and others
 SLOT_INTERFACE_END
 
 MACHINE_CONFIG_FRAGMENT( ti99_hfdc )
@@ -1015,7 +1015,7 @@ MACHINE_CONFIG_FRAGMENT( ti99_hfdc )
 	MCFG_MFM_HARDDISK_ADD("h1", hfdc_harddisks, NULL)
 	MCFG_MFM_HARDDISK_ADD("h2", hfdc_harddisks, NULL)
 	MCFG_MFM_HARDDISK_ADD("h3", hfdc_harddisks, NULL)
-	
+
 	MCFG_DEVICE_ADD(CLOCK_TAG, MM58274C, 0)
 	MCFG_MM58274C_MODE24(1) // 24 hour
 	MCFG_MM58274C_DAY1(0)   // sunday
@@ -1478,8 +1478,8 @@ MACHINE_CONFIG_FRAGMENT( ti99_hfdc_legacy )
 	MCFG_DEVICE_ADD(CLOCK_TAG, MM58274C, 0)
 	MCFG_MM58274C_MODE24(1) // 24 hour
 	MCFG_MM58274C_DAY1(0)   // sunday
-	
+
-	MCFG_MFMHD_3_DRIVES_ADD()   // add hard disks	
+	MCFG_MFMHD_3_DRIVES_ADD()   // add hard disks
 MACHINE_CONFIG_END
 
 ROM_START( ti99_hfdc_legacy )

src/emu/bus/ti99_peb/hfdc.h

@@ -52,7 +52,7 @@ public:
 
 protected:
 	void device_config_complete();
-	
+
 private:
 	void device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr);
 	void device_start();
@@ -70,7 +70,7 @@ private:
 	void floppy_index_callback(floppy_image_device *floppy, int state);
 	void harddisk_index_callback(mfm_harddisk_device *harddisk, int state);
 	void harddisk_skcom_callback(mfm_harddisk_device *harddisk, int state);
-	
+
 	// Operate the floppy motors
 	void set_floppy_motors_running(bool run);
 
@@ -184,7 +184,7 @@ private:
 
 /* Connector for a MFM hard disk. See also floppy.c */
 class mfm_harddisk_connector : public device_t,
-                               public device_slot_interface
+								public device_slot_interface
 {
 public:
 	mfm_harddisk_connector(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock);

src/emu/cpu/dsp16/dsp16dis.c

@@ -101,7 +101,7 @@ std::string disasmF2Field(const UINT8& F2, const UINT8& D, const UINT8& S)
 		case 0x05: strprintf(ret, "a%d = a%d << 8", D, S); break;
 		case 0x06: strprintf(ret, "a%d = a%d >> 16", D, S); break;
 		case 0x07: strprintf(ret, "a%d = a%d << 16", D, S); break;
-			   
+
 		case 0x08: strprintf(ret, "a%d = p", D); break;
 		case 0x09: strprintf(ret, "a%dh = a%dh + 1", D, S); break;
 		case 0x0a: strprintf(ret, "RESERVED"); break;

src/emu/cpu/m68000/m68kops.c

@@ -34882,5 +34882,3 @@ void m68ki_build_opcode_table(void)
 /* ======================================================================== */
 /* ============================== END OF FILE ============================= */
 /* ======================================================================== */
-
-

src/emu/cpu/mcs51/mcs51.h

@@ -150,7 +150,7 @@ protected:
 	UINT8   m_irq_active;         /* mask which irq levels are serviced */
 	UINT8   m_irq_prio[8];        /* interrupt priority */
 
-	UINT8	m_forced_inputs[4];	  /* allow read even if configured as output */
+	UINT8   m_forced_inputs[4];   /* allow read even if configured as output */
 
 	int     m_icount;
 

src/emu/cpu/mips/mips3.h

@@ -396,8 +396,8 @@ private:
 
 	/* memory accesses */
 	bool            m_bigendian;
-	UINT32			m_byte_xor;
+	UINT32          m_byte_xor;
-	UINT32			m_word_xor;
+	UINT32          m_word_xor;
 	data_accessors  m_memory;
 
 	/* cache memory */

src/emu/cpu/nec/v53.c

@@ -477,8 +477,8 @@ static MACHINE_CONFIG_FRAGMENT( v53 )
 
 	MCFG_DEVICE_ADD("pit", PIT8254, 0) // functionality identical to uPD71054
 	MCFG_PIT8253_CLK0(16000000) // manual implicitly claims that these runs at same speed as the CPU
-	MCFG_PIT8253_CLK1(16000000) 
+	MCFG_PIT8253_CLK1(16000000)
-	MCFG_PIT8253_CLK2(16000000) 
+	MCFG_PIT8253_CLK2(16000000)
 	MCFG_PIT8253_OUT0_HANDLER(WRITELINE( v53_base_device, tcu_out0_trampoline_cb ))
 	MCFG_PIT8253_OUT1_HANDLER(WRITELINE( v53_base_device, tcu_out1_trampoline_cb ))
 	MCFG_PIT8253_OUT2_HANDLER(WRITELINE( v53_base_device, tcu_out2_trampoline_cb ))

src/emu/cpu/sh4/sh4.c

@@ -100,8 +100,8 @@ sh34_base_device::sh34_base_device(const machine_config &mconfig, device_type ty
 #if SH4_USE_FASTRAM_OPTIMIZATION
 	, m_bigendian(endianness == ENDIANNESS_BIG)
 	, m_byte_xor(m_bigendian ? BYTE8_XOR_BE(0) : BYTE8_XOR_LE(0))
-    , m_word_xor(m_bigendian ? WORD2_XOR_BE(0) : WORD2_XOR_LE(0))
+	, m_word_xor(m_bigendian ? WORD2_XOR_BE(0) : WORD2_XOR_LE(0))
-    , m_dword_xor(m_bigendian ? DWORD_XOR_BE(0) : DWORD_XOR_LE(0))
+	, m_dword_xor(m_bigendian ? DWORD_XOR_BE(0) : DWORD_XOR_LE(0))
 	, m_fastram_select(0)
 #endif
 {

src/emu/cpu/sh4/sh4.h

@@ -693,9 +693,9 @@ protected:
 #if SH4_USE_FASTRAM_OPTIMIZATION
 	/* fast RAM */
 	bool            m_bigendian;
-	UINT32			m_byte_xor;
+	UINT32          m_byte_xor;
-	UINT32			m_word_xor;
+	UINT32          m_word_xor;
-	UINT32			m_dword_xor;
+	UINT32          m_dword_xor;
 	UINT32              m_fastram_select;
 	struct
 	{

src/emu/cpu/tms0980/tms0980.c

@@ -3,7 +3,7 @@
 /*
 
   TMS0980/TMS1000-family MCU cores
-  
+
   TODO:
   - emulate TMS1600 L-pins
   - fix debugger disasm view

src/emu/debug/debugcpu.h

@@ -236,7 +236,7 @@ public:
 	void registerpoint_enable_all(bool enable = true );
 
 	// hotspots
-  bool hotspot_tracking_enabled() const { return !m_hotspots.empty(); }
+	bool hotspot_tracking_enabled() const { return !m_hotspots.empty(); }
 	void hotspot_track(int numspots, int threshhold);
 
 	// comments

src/emu/diimage.c

@@ -805,7 +805,7 @@ bool device_image_interface::load_software(software_list_device &swlist, const c
 				int separator = tag4.find_first_of('%');
 				if (separator != -1)
 				{
-					// we are loading a clone through softlists, split the setname from the parentname					
+					// we are loading a clone through softlists, split the setname from the parentname
 					tag5.assign(tag4.substr(separator + 1, tag4.length() - separator + 1));
 					tag4.erase(separator, tag4.length() - separator);
 				}

src/emu/drivenum.c

@@ -134,7 +134,7 @@ driver_enumerator::driver_enumerator(emu_options &options)
 		m_included(s_driver_count),
 		m_config(s_driver_count)
 {
-	memset(&m_included[0], 0, s_driver_count); 
+	memset(&m_included[0], 0, s_driver_count);
 	memset(&m_config[0], 0, s_driver_count*sizeof(m_config[0]));
 	include_all();
 }
@@ -147,7 +147,7 @@ driver_enumerator::driver_enumerator(emu_options &options, const char *string)
 		m_included(s_driver_count),
 		m_config(s_driver_count)
 {
-	memset(&m_included[0], 0, s_driver_count); 
+	memset(&m_included[0], 0, s_driver_count);
 	memset(&m_config[0], 0, s_driver_count*sizeof(m_config[0]));
 	filter(string);
 }
@@ -160,7 +160,7 @@ driver_enumerator::driver_enumerator(emu_options &options, const game_driver &dr
 		m_included(s_driver_count),
 		m_config(s_driver_count)
 {
-	memset(&m_included[0], 0, s_driver_count); 
+	memset(&m_included[0], 0, s_driver_count);
 	memset(&m_config[0], 0, s_driver_count*sizeof(m_config[0]));
 	filter(driver);
 }

src/emu/imagedev/harddriv.c

@@ -49,7 +49,7 @@ harddisk_image_device::harddisk_image_device(const machine_config &mconfig, cons
 
 //-------------------------------------------------
 //  harddisk_image_device - constructor for subclasses
-//------------------------------------------------- 
+//-------------------------------------------------
 harddisk_image_device::harddisk_image_device(const machine_config &mconfig, device_type type, const char *name, const char *tag, device_t *owner, UINT32 clock, const char *shortname, const char *source)
 	: device_t(mconfig, type, name, tag, owner, clock, shortname, source),
 		device_image_interface(mconfig, *this),

src/emu/info.c

@@ -1080,7 +1080,7 @@ void info_xml_creator::output_switches(const ioport_list &portlist, const char *
 				std::string output;
 
 				std::string newtag(port->tag()), oldtag(":");
-				newtag = newtag.substr(newtag.find(oldtag.append(root_tag).c_str()) + oldtag.length()); 
+				newtag = newtag.substr(newtag.find(oldtag.append(root_tag).c_str()) + oldtag.length());
 
 				// output the switch name information
 				std::string normalized_field_name(xml_normalize_string(field->name()));

src/emu/machine/hdc9234.c

@@ -240,7 +240,7 @@ enum
 {
 	GEN_TIMER = 1,
 	COM_TIMER /*,
-	LIVE_TIMER */
+    LIVE_TIMER */
 };
 
 /*
@@ -1820,7 +1820,7 @@ void hdc9234_device::live_run()
     the requested data are read.
     limit: if unlimited (attotime::never), run up to the end of the track and wait there
     otherwise, used to replay the read/write operation up to the point where the event happened
-    
+
     THIS IS THE FLOPPY-ONLY LIVE_RUN
 */
 void hdc9234_device::live_run_until(attotime limit)
@@ -2632,12 +2632,12 @@ void hdc9234_device::live_run_until(attotime limit)
     the requested data are read.
     limit: if unlimited (attotime::never), run up to the end of the track and wait there
     otherwise, used to replay the read/write operation up to the point where the event happened
-    
+
     THIS IS THE HARDDISK-ONLY LIVE_RUN
 */
 void hdc9234_device::live_run_hd_until(attotime limit)
 {
-//	int slot = 0;
+//  int slot = 0;
 	logerror("%s: live_run_hd\n", tag());
 
 	if (m_live_state.state == IDLE || m_live_state.next_state != -1)
@@ -2656,7 +2656,7 @@ void hdc9234_device::live_run_hd_until(attotime limit)
 		{
 			case SEARCH_IDAM:
 				break;
-		}		
+		}
 		return;
 	}
 }
@@ -3411,8 +3411,8 @@ void hdc9234_device::device_timer(emu_timer &timer, device_timer_id id, int para
 		process_command();
 		break;
 	/* case LIVE_TIMER:
-		live_run();
+	    live_run();
-		break; */
+	    break; */
 	}
 }
 

src/emu/machine/hdc9234.h

@@ -227,7 +227,7 @@ private:
 
 	// Analyses the track until the given time
 	void live_run_until(attotime limit);
-	
+
 	// Same for hard disks
 	void live_run_hd_until(attotime limit);
 

src/emu/machine/mos6530n.c

@@ -247,7 +247,7 @@ void mos6530_t::update_pb()
 	}
 	else
 	{
-		m_out_pb_cb(data);	
+		m_out_pb_cb(data);
 	}
 }
 

src/emu/machine/mos6530n.h

@@ -46,7 +46,7 @@
 //**************************************************************************
 
 #define MCFG_MOS6530n_IRQ_CB(_write) \
-    devcb = &mos6530_t::set_irq_wr_callback(*device, DEVCB_##_write);
+	devcb = &mos6530_t::set_irq_wr_callback(*device, DEVCB_##_write);
 
 #define MCFG_MOS6530n_IN_PA_CB(_read) \
 	devcb = &mos6530_t::set_pa_rd_callback(*device, DEVCB_##_read);

src/emu/machine/pci9050.c

@@ -1,9 +1,9 @@
 /*********************************************************************
 
     pci9050.c - PLX PCI9050 PCI to 4x Local Bus Bridge
- 
+
-	by R. Belmont
+    by R. Belmont
- 
+
     PCI spaces:
     0 - (config memory) not used
     1 - (config I/O) config regs
@@ -11,12 +11,12 @@
     3 - local bus 2 window
     4 - local bus 3 window
     5 - local bus 4 window
- 
+
     PCI9050 is located, mapped, and initialized at BFC00700.
- 
+
-	The boot ROM then copies ROM to RAM, jumps to RAM, and starts trying to
+    The boot ROM then copies ROM to RAM, jumps to RAM, and starts trying to
     access Zeus 2 video through the mapped windows.
- 
+
 *********************************************************************/
 
 #include "pci9050.h"
@@ -66,12 +66,12 @@ void pci9050_device::device_start()
 
 	pci_device::device_start();
 
-	add_map(0x100, M_MEM, FUNC(pci9050_device::map));			// map 0 is our config registers, mem space
+	add_map(0x100, M_MEM, FUNC(pci9050_device::map));           // map 0 is our config registers, mem space
-	add_map(0x100, M_IO,  FUNC(pci9050_device::map));			// map 1 is our config registers, i/o space
+	add_map(0x100, M_IO,  FUNC(pci9050_device::map));           // map 1 is our config registers, i/o space
 
 	for(int i=0; i<4; i++)
 		if(m_names[i])
-			//			add_map(0, M_MEM | M_DISABLED, m_maps[i], m_names[i], m_devices[i]);
+			//          add_map(0, M_MEM | M_DISABLED, m_maps[i], m_names[i], m_devices[i]);
 			add_map(0, M_MEM | M_DISABLED, trampolines[i], m_names[i]);
 		else
 			add_map(0, M_MEM | M_DISABLED, FUNC(pci9050_device::empty));
@@ -119,8 +119,8 @@ void pci9050_device::remap_local(int id)
 	int size = 2 << lsize;
 	if(csbase & 0x0fffffff & ~(size-1)) {
 		logerror("PCI9050 local bus %d disabled due to unimplemented post-decode remapping\n", id);
-		//		set_map_flags(id+2, M_MEM | M_DISABLED);
+		//      set_map_flags(id+2, M_MEM | M_DISABLED);
-		//		return;
+		//      return;
 	}
 
 	UINT32 mask = ~(size - 1);
@@ -131,8 +131,8 @@ void pci9050_device::remap_local(int id)
 
 	if((lasrr & mask) != mask) {
 		logerror("PCI9050 local bus %d disabled due to unimplemented pci mirroring\n", id);
-		//		set_map_flags(id+2, M_MEM | M_DISABLED);
+		//      set_map_flags(id+2, M_MEM | M_DISABLED);
-		//		return;
+		//      return;
 	}
 
 	set_map_size(id+2, size);

src/emu/machine/pci9050.h

@@ -1,9 +1,9 @@
 /*********************************************************************
 
     pci9050.h - PLX PCI9050 PCI to 4x Local Bus Bridge
- 
+
-	by R. Belmont
+    by R. Belmont
- 
+
 *********************************************************************/
 
 #ifndef _PCI9050_H
@@ -17,7 +17,7 @@
 #define MCFG_PCI9050_SET_MAP(id, map) \
 	downcast<pci9050_device *>(device)->set_map(id, ADDRESS_MAP_NAME(map), #map, owner);
 
-class pci9050_device : 
+class pci9050_device :
 	public pci_device
 {
 public:

src/emu/machine/ti99_hd.c

@@ -11,7 +11,7 @@
 
     References:
     [1] ST225 OEM Manual, Seagate
-    
+
 **************************************************************************/
 
 #include "emu.h"
@@ -31,7 +31,7 @@
 #define GAP4 340
 #define SYNC 13
 
-enum 
+enum
 {
 	INDEX_TM = 0,
 	SPINUP_TM,
@@ -47,7 +47,7 @@ enum
 
 mfm_harddisk_device::mfm_harddisk_device(const machine_config &mconfig, device_type type, const char *name, const char *tag, device_t *owner, UINT32 clock, const char *shortname, const char *source)
 	: harddisk_image_device(mconfig, type, name, tag, owner, clock, shortname, source),
-	  device_slot_card_interface(mconfig, *this)
+		device_slot_card_interface(mconfig, *this)
 {
 }
 
@@ -56,7 +56,7 @@ void mfm_harddisk_device::device_start()
 	m_index_timer = timer_alloc(INDEX_TM);
 	m_spinup_timer = timer_alloc(SPINUP_TM);
 	m_seek_timer = timer_alloc(SEEK_TM);
-	
+
 	// MFM drives have a revolution rate of 3600 rpm (i.e. 60/sec)
 	m_index_timer->adjust(attotime::from_hz(60), 0, attotime::from_hz(60));
 
@@ -112,12 +112,12 @@ void mfm_harddisk_device::device_timer(emu_timer &timer, device_timer_id id, int
 		case STEP_MOVING:
 			// Head has reached final position
 			// Check whether we have a new delta
-			if (m_track_delta == 0) 	
+			if (m_track_delta == 0)
 			{
 				// Start the settle timer
 				m_step_phase = STEP_SETTLE;
 				m_seek_timer->adjust(attotime::from_usec(16800));
-				logerror("%s: Arrived at target track %d, settling ...\n", tag(), m_current_cylinder);	
+				logerror("%s: Arrived at target track %d, settling ...\n", tag(), m_current_cylinder);
 			}
 			break;
 		case STEP_SETTLE:
@@ -126,7 +126,7 @@ void mfm_harddisk_device::device_timer(emu_timer &timer, device_timer_id id, int
 			else
 			{
 				// Seek completed
-				logerror("%s: Settling done at cylinder %d, seek complete\n", tag(), m_current_cylinder);	
+				logerror("%s: Settling done at cylinder %d, seek complete\n", tag(), m_current_cylinder);
 				m_seek_complete = true;
 				m_seek_complete_cb(this, ASSERT_LINE);
 				m_step_phase = STEP_COLLECT;
@@ -136,11 +136,11 @@ void mfm_harddisk_device::device_timer(emu_timer &timer, device_timer_id id, int
 	}
 }
 
-void mfm_harddisk_device::head_move() 
+void mfm_harddisk_device::head_move()
 {
 	int steps = m_track_delta;
-	if (steps < 0) steps = -steps; 
+	if (steps < 0) steps = -steps;
-	logerror("%s: Moving head by %d step(s) %s\n", tag(), steps, (m_track_delta<0)? "outward" : "inward");	
+	logerror("%s: Moving head by %d step(s) %s\n", tag(), steps, (m_track_delta<0)? "outward" : "inward");
 
 	int disttime = steps*200;
 	m_step_phase = STEP_MOVING;
@@ -153,72 +153,72 @@ void mfm_harddisk_device::head_move()
 	m_track_delta = 0;
 }
 
-void mfm_harddisk_device::direction_in_w(line_state line) 
+void mfm_harddisk_device::direction_in_w(line_state line)
 {
 	m_seek_inward = (line == ASSERT_LINE);
 	logerror("%s: Setting seek direction %s\n", tag(), m_seek_inward? "inward" : "outward");
 }
 
 /*
-	According to the specs [1]:
+    According to the specs [1]:
-	
-	"4.3.1 BUFFERED SEEK: To minimize access time, pulses may be issued at an 
-	accelerated rate and buffered in a counter. Initiation of a seek starts 
-	immediately after the first pulse is received. Head motion occurs during 
-	pulse accumulation, and the seek is completed following receipt of all pulses."
 
-	"8.1.3 SEEKING: Upon receiving a Step pulse, the MPU (microprocessor unit)
+    "4.3.1 BUFFERED SEEK: To minimize access time, pulses may be issued at an
+    accelerated rate and buffered in a counter. Initiation of a seek starts
+    immediately after the first pulse is received. Head motion occurs during
+    pulse accumulation, and the seek is completed following receipt of all pulses."
+
+    "8.1.3 SEEKING: Upon receiving a Step pulse, the MPU (microprocessor unit)
     pauses for 250 usec to allow for additional pulses before executing the seek
-	operation. Every incoming pulse resets the 250 usec timer. The seek will
+    operation. Every incoming pulse resets the 250 usec timer. The seek will
-	not begin until the last pulse is received."
+    not begin until the last pulse is received."
-	
-	WTF? Oh come on, Seagate, be consistent at least in a single document.
-	
-	================================
-	
-	Step behaviour:
-	During all waiting times, further step_w invocations increase the counter
-	
-	- Leading edge increments the counter c and sets the timer to 250us (mode=collect)
-	- When the timer expires (mode=collect):
-   (1)- Calculate the stepping time: time = c*200us; save the counter
-	  - Start the timer (mode=move)
-	  - When the timer expires (mode=move)
-	    - Add the track delta to the current track position
-	    - Subtract the delta from the current counter
-	    - When the counter is not zero (pulses arrived in the meantime), go to (1)
-	    - When the counter is zero, set the timer to 16.8 ms (mode=settle)
-	    - When the timer expires (mode=settle)
-	      - When the counter is not zero, go to (1)
-	      - When the counter is zero, signal seek_complete; done
-	     
-      Step timing:
- 		per track = 20 ms max, full seek: 150 ms max (615 tracks); both including settling time
-		We assume t(1) = 17; t(615)=140
-		t(i) = s+d*i
-		s=(615*t(1)-t(615))/614
-		d=t(1)-s
-		s=16800 us, d=200 us
-*/	
 
-void mfm_harddisk_device::step_w(line_state line) 
+    WTF? Oh come on, Seagate, be consistent at least in a single document.
+
+    ================================
+
+    Step behaviour:
+    During all waiting times, further step_w invocations increase the counter
+
+    - Leading edge increments the counter c and sets the timer to 250us (mode=collect)
+    - When the timer expires (mode=collect):
+   (1)- Calculate the stepping time: time = c*200us; save the counter
+      - Start the timer (mode=move)
+      - When the timer expires (mode=move)
+        - Add the track delta to the current track position
+        - Subtract the delta from the current counter
+        - When the counter is not zero (pulses arrived in the meantime), go to (1)
+        - When the counter is zero, set the timer to 16.8 ms (mode=settle)
+        - When the timer expires (mode=settle)
+          - When the counter is not zero, go to (1)
+          - When the counter is zero, signal seek_complete; done
+
+      Step timing:
+        per track = 20 ms max, full seek: 150 ms max (615 tracks); both including settling time
+        We assume t(1) = 17; t(615)=140
+        t(i) = s+d*i
+        s=(615*t(1)-t(615))/614
+        d=t(1)-s
+        s=16800 us, d=200 us
+*/
+
+void mfm_harddisk_device::step_w(line_state line)
 {
 	// Leading edge
 	if (line == ASSERT_LINE && m_step_line == CLEAR_LINE)
 	{
-		if (m_seek_complete) 
+		if (m_seek_complete)
 		{
-			m_step_phase = STEP_COLLECT;		
+			m_step_phase = STEP_COLLECT;
 			m_seek_complete = false;
 			m_seek_complete_cb(this, CLEAR_LINE);
 		}
 
 		// Counter will be adjusted according to the direction (+-1)
-		m_track_delta += (m_seek_inward)? +1 : -1; 
+		m_track_delta += (m_seek_inward)? +1 : -1;
 		logerror("%s: Got seek pulse; track delta %d\n", tag(), m_track_delta);
-		if (m_track_delta < -670 || m_track_delta > 670) 
+		if (m_track_delta < -670 || m_track_delta > 670)
 		{
-			logerror("%s: Excessive step pulses - doing auto-truncation\n", tag());  
+			logerror("%s: Excessive step pulses - doing auto-truncation\n", tag());
 			m_autotruncation = true;
 		}
 		m_seek_timer->adjust(attotime::from_usec(250));

src/emu/machine/ti99_hd.h

@@ -18,7 +18,7 @@
 #include "imagedev/harddriv.h"
 
 class mfm_harddisk_device : public harddisk_image_device,
-                            public device_slot_card_interface
+							public device_slot_card_interface
 {
 public:
 	mfm_harddisk_device(const machine_config &mconfig, device_type type, const char *name, const char *tag, device_t *owner, UINT32 clock, const char *shortname, const char *source);
@@ -30,34 +30,34 @@ public:
 	void setup_seek_complete_cb(seek_complete_cb cb);
 
 	// Active low lines. We're using ASSERT=0 / CLEAR=1
-	line_state		ready_r() { return m_ready? ASSERT_LINE : CLEAR_LINE; }
+	line_state      ready_r() { return m_ready? ASSERT_LINE : CLEAR_LINE; }
-	line_state		seek_complete_r() { return m_seek_complete? ASSERT_LINE : CLEAR_LINE; } ;
+	line_state      seek_complete_r() { return m_seek_complete? ASSERT_LINE : CLEAR_LINE; } ;
-	line_state		trk00_r() { return m_current_cylinder==0? ASSERT_LINE : CLEAR_LINE; } 
+	line_state      trk00_r() { return m_current_cylinder==0? ASSERT_LINE : CLEAR_LINE; }
 
 	// Step
-	void 			step_w(line_state line);
+	void            step_w(line_state line);
-	void 			direction_in_w(line_state line);
+	void            direction_in_w(line_state line);
-	
+
 protected:
-	void        		device_start();
+	void                device_start();
-	void				device_reset();
+	void                device_reset();
-	emu_timer    	  	*m_index_timer, *m_spinup_timer, *m_seek_timer;
+	emu_timer           *m_index_timer, *m_spinup_timer, *m_seek_timer;
-	index_pulse_cb 		m_index_pulse_cb;
+	index_pulse_cb      m_index_pulse_cb;
-	seek_complete_cb	m_seek_complete_cb;
+	seek_complete_cb    m_seek_complete_cb;
-	void           		device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr);
+	void                device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr);
 
 private:
-	bool		m_ready;
+	bool        m_ready;
-	int			m_current_cylinder;
+	int         m_current_cylinder;
-	int 		m_track_delta;
+	int         m_track_delta;
-	int			m_step_phase;
+	int         m_step_phase;
-	bool 		m_seek_complete;
+	bool        m_seek_complete;
-	bool		m_seek_inward;
+	bool        m_seek_inward;
-	//bool		m_seeking;
+	//bool      m_seeking;
-	bool		m_autotruncation;
+	bool        m_autotruncation;
-	line_state	m_step_line;	// keep the last state
+	line_state  m_step_line;    // keep the last state
-	
+
-	void 		head_move();
+	void        head_move();
 };
 
 class mfm_hd_generic_device : public mfm_harddisk_device

src/emu/machine/vrc4373.h

@@ -45,15 +45,15 @@
 #define NREG_PCIEN          (0x074/4)
 #define NREG_PMIR           (0x078/4)
 
-#define DMA_BUSY				0x80000000
+#define DMA_BUSY                0x80000000
-#define DMA_INT_EN			0x40000000
+#define DMA_INT_EN          0x40000000
-#define DMA_RW					0x20000000
+#define DMA_RW                  0x20000000
-#define DMA_GO					0x10000000
+#define DMA_GO                  0x10000000
-#define DMA_SUS					0x08000000
+#define DMA_SUS                 0x08000000
-#define DMA_INC 				0x04000000
+#define DMA_INC                 0x04000000
-#define DMA_MIO					0x02000000
+#define DMA_MIO                 0x02000000
-#define DMA_RST					0x01000000
+#define DMA_RST                 0x01000000
-#define DMA_BLK_SIZE		0x000fffff
+#define DMA_BLK_SIZE        0x000fffff
 
 
 class vrc4373_device : public pci_host_device {

src/emu/machine/z80pio.c

@@ -11,9 +11,9 @@
 
 /*
 
-	TODO:
+    TODO:
 
-	- if port A is bidirectional, port B does not issue interrupts in bit mode
+    - if port A is bidirectional, port B does not issue interrupts in bit mode
 
 */
 
@@ -255,7 +255,7 @@ void z80pio_device::check_interrupts()
 	for (int index = PORT_A; index < PORT_COUNT; index++)
 	{
 		if (LOG) logerror("Z80PIO '%s' Port %c IE %s IP %s IUS %s\n", tag(), 'A' + index, m_port[index].m_ie ? "1":"0", m_port[index].m_ip ? "1":"0", m_port[index].m_ius ? "1":"0");
-		
+
 		if (!ius && m_port[index].m_ie && m_port[index].m_ip)
 		{
 			state = ASSERT_LINE;

src/emu/netlist/devices/net_lib.c

@@ -122,7 +122,7 @@ void nl_initialize_factory(netlist_factory_t &factory)
 	ENTRY(74175,                TTL_74175,              "-")
 	ENTRY(74192,                TTL_74192,              "-")
 	ENTRY(74193,                TTL_74193,              "-")
-	//ENTRY(74279, 	            TTL_74279,              "-") // only dip available
+	//ENTRY(74279,              TTL_74279,              "-") // only dip available
 	ENTRY(SN74LS629,            SN74LS629,              "CAP")
 	ENTRY(82S16,                TTL_82S16,              "-")
 	ENTRY(9310,                 TTL_9310,               "-")

src/emu/netlist/devices/nld_74175.c

@@ -32,7 +32,7 @@ NETLIB_UPDATE(74175)
 
 NETLIB_START(74175)
 {
-	register_input("CLK",	m_CLK);
+	register_input("CLK",   m_CLK);
 	register_input("CLRQ",  m_CLRQ);
 
 	register_input("D1",    m_D[0]);
@@ -60,7 +60,7 @@ NETLIB_RESET(74175)
 
 NETLIB_START(74175_dip)
 {
-	register_input("9",	m_CLK);
+	register_input("9", m_CLK);
 	register_input("1",  m_CLRQ);
 
 	register_input("4",    m_D[0]);

src/emu/netlist/devices/nld_74175.h

@@ -39,8 +39,7 @@
 #include "nld_signal.h"
 
 #define TTL_74175(_name)                                     \
-		NET_REGISTER_DEV(74175, _name)                       \
+		NET_REGISTER_DEV(74175, _name)
-
 #define TTL_74175_DIP(_name)                                 \
 		NET_REGISTER_DEV(74175_dip, _name)
 

src/emu/netlist/devices/nld_74192.h

@@ -4,7 +4,7 @@
  * nld_74192.h
  *
  *  DM74192: Synchronous 4-Bit Binary Counter with Dual Clock
- *  		 Decade counter
+ *           Decade counter
  *
  *  FIXME: This should be merged with the 74193 which counts to 16
  *
@@ -31,7 +31,7 @@
 
 #include "../nl_base.h"
 
-#define TTL_74192(_name) 				                              \
+#define TTL_74192(_name)                                              \
 		NET_REGISTER_DEV(74192, _name)
 
 #define TTL_74192_DIP(_name)                                                         \

src/emu/netlist/devices/nld_74193.h

@@ -28,7 +28,7 @@
 
 #include "../nl_base.h"
 
-#define TTL_74193(_name) 				                              \
+#define TTL_74193(_name)                                              \
 		NET_REGISTER_DEV(74193, _name)
 
 #define TTL_74193_DIP(_name)                                                         \

src/emu/netlist/devices/nld_82S16.c

@@ -32,14 +32,14 @@ NETLIB_UPDATE(82S16)
 
 NETLIB_START(82S16)
 {
-	register_input("A0",	m_A[0]);
+	register_input("A0",    m_A[0]);
-	register_input("A1",	m_A[1]);
+	register_input("A1",    m_A[1]);
-	register_input("A2",	m_A[2]);
+	register_input("A2",    m_A[2]);
-	register_input("A3",	m_A[3]);
+	register_input("A3",    m_A[3]);
-	register_input("A4",	m_A[4]);
+	register_input("A4",    m_A[4]);
-	register_input("A5",	m_A[5]);
+	register_input("A5",    m_A[5]);
-	register_input("A6",	m_A[6]);
+	register_input("A6",    m_A[6]);
-	register_input("A7",	m_A[7]);
+	register_input("A7",    m_A[7]);
 
 	register_input("CE1Q",  m_CE1Q);
 	register_input("CE2Q",  m_CE2Q);
@@ -63,16 +63,16 @@ NETLIB_RESET(82S16)
 
 NETLIB_START(82S16_dip)
 {
-	register_input("2",		m_A[0]);
+	register_input("2",     m_A[0]);
-	register_input("1",		m_A[1]);
+	register_input("1",     m_A[1]);
-	register_input("15",	m_A[2]);
+	register_input("15",    m_A[2]);
-	register_input("14",	m_A[3]);
+	register_input("14",    m_A[3]);
-	register_input("7",		m_A[4]);
+	register_input("7",     m_A[4]);
-	register_input("9",		m_A[5]);
+	register_input("9",     m_A[5]);
-	register_input("10",	m_A[6]);
+	register_input("10",    m_A[6]);
-	register_input("11",	m_A[7]);
+	register_input("11",    m_A[7]);
 
-	register_input("3",		m_CE1Q);
+	register_input("3",     m_CE1Q);
 	register_input("4",     m_CE2Q);
 	register_input("5",     m_CE3Q);
 

src/emu/netlist/devices/nld_82S16.h

@@ -27,8 +27,7 @@
 #include "../nl_base.h"
 
 #define TTL_82S16(_name)                                     \
-		NET_REGISTER_DEV(82S16, _name)                       \
+		NET_REGISTER_DEV(82S16, _name)
-
 #define TTL_82S16_DIP(_name)                                 \
 		NET_REGISTER_DEV(82S16_dip, _name)
 

src/emu/netlist/devices/nld_9312.c

@@ -24,7 +24,7 @@
 nld_9312::truthtable_t nld_9312::m_ttbl;
 
 /* FIXME: Data changes are propagating faster than changing selects A,B,C
- * 		  Please refer to data sheet.
+ *        Please refer to data sheet.
  *        This would require a state machine, thus we do not
  *        do this right now.
  */

src/emu/netlist/devices/nld_9312.h

@@ -40,8 +40,7 @@
 #include "nld_signal.h"
 
 #define TTL_9312(_name)                                                \
-		NET_REGISTER_DEV(9312, _name)                                  \
+		NET_REGISTER_DEV(9312, _name)
-
 //#if (USE_TRUTHTABLE)
 #include "nld_truthtable.h"
 NETLIB_TRUTHTABLE(9312, 12, 2, 0);

src/emu/netlist/devices/nld_legacy.c

@@ -53,7 +53,6 @@ NETLIB_RESET(nicDelay)
 
 NETLIB_UPDATE_PARAM(nicDelay)
 {
-
 }
 
 NETLIB_UPDATE(nicDelay)

src/emu/netlist/devices/nld_signal.h

@@ -78,7 +78,7 @@ public:
 
 		// FIXME: this check is needed because update is called during startup as well
 		//if (m_active == 0 && netlist().use_deactivate())
-		//	return;
+		//  return;
 
 		for (int i = 0; i< _numdev; i++)
 		{
@@ -152,7 +152,7 @@ public:
 
 		// FIXME: this check is needed because update is called during startup as well
 		//if (m_active == 0 && netlist().use_deactivate())
-		//	return;
+		//  return;
 
 		m_i[0].activate();
 		m_i[1].activate();

src/emu/netlist/devices/nld_truthtable.h

@@ -186,7 +186,7 @@ public:
 	{
 		// FIXME: this check is needed because update is called during startup as well
 		//if (m_active == 0 && UNEXPECTED(netlist().use_deactivate()))
-		//	return;
+		//  return;
 
 		UINT32 state = 0;
 		for (int i = 0; i < m_NI; i++)

src/emu/netlist/nl_base.c

@@ -139,7 +139,7 @@ netlist_base_t::netlist_base_t()
 	:   netlist_object_t(NETLIST, GENERIC),
 		m_stop(netlist_time::zero),
 		// FIXME:: Use a parameter to set this on a schematics per schematics basis
-	    m_use_deactivate(USE_DEACTIVE_DEVICE),
+		m_use_deactivate(USE_DEACTIVE_DEVICE),
 		m_time(netlist_time::zero),
 		m_queue(*this),
 		m_mainclock(NULL),

src/emu/netlist/nl_base.h

@@ -1216,7 +1216,7 @@ protected:
 
 private:
 	netlist_time                m_stop;     // target time for current queue processing
-	bool						m_use_deactivate;
+	bool                        m_use_deactivate;
 
 	netlist_time                m_time;
 	netlist_queue_t             m_queue;

src/emu/netlist/nl_config.h

@@ -37,7 +37,7 @@
 
 #define USE_DEACTIVE_DEVICE     (0)
 
-#define USE_TRUTHTABLE			(0)
+#define USE_TRUTHTABLE          (0)
 
 // The following adds about 10% performance ...
 

src/emu/netlist/nl_dice_compat.h

@@ -110,22 +110,21 @@ public:
 
 #define CHIP_9602_Mono(_name,  _pdesc)   \
 	CHIP(# _name, 9602) \
-	NET_C(VCC, _name.16)		\
+	NET_C(VCC, _name.16)        \
-	NET_C(GND, _name.8)  		\
+	NET_C(GND, _name.8)         \
 	RES(_name ## _R1, (_pdesc)->r1) \
 	CAP(_name ## _C1, (_pdesc)->c1) \
 	RES(_name ## _R2, (_pdesc)->r2) \
 	NET_C(_name.1, _name ## _C1.1) \
 	NET_C(_name.2, _name ## _C1.2) \
 	NET_C(_name.2, _name ## _R1.2) \
-	NET_C(VCC, 	   _name ## _R1.1) \
+	NET_C(VCC,     _name ## _R1.1) \
 	if (((_pdesc)->c2)>1e-15) { \
 	CAP(_name ## _C2, (_pdesc)->c2) \
 	NET_C(_name.15, _name ## _C2.1) \
 	NET_C(_name.14, _name ## _C2.2) }\
 	NET_C(_name.14, _name ## _R2.2) \
-	NET_C(VCC, 	   _name ## _R2.1) \
+	NET_C(VCC,     _name ## _R2.1)
-
 #define CHIP_SERIES_RC(_name,  _pdesc)   \
 	RES(_name ## _R, (_pdesc)->r) \
 	CAP(_name ## _C, (_pdesc)->c) \
@@ -153,7 +152,7 @@ public:
 	ALIAS(_name.3, _name.QQ)
 
 /* FIXME: Alternative implementation using capacitor.
- * 		  This is a transitional implementation
+ *        This is a transitional implementation
  */
 
 inline int CAPACITOR_tc(const double c, const double r)
@@ -166,7 +165,6 @@ inline int CAPACITOR_tc(const double c, const double r)
 #define CHIP_CAPACITOR(_name, _pdesc) \
 	NETDEV_DELAY(_name) \
 	NETDEV_PARAMI(_name, L_TO_H, CAPACITOR_tc((_pdesc)->c, (_pdesc)->r)) \
-	NETDEV_PARAMI(_name, H_TO_HL, CAPACITOR_tc((_pdesc)->c, (_pdesc)->r)) \
+	NETDEV_PARAMI(_name, H_TO_HL, CAPACITOR_tc((_pdesc)->c, (_pdesc)->r))
-
 
 #endif /* NL_DICE_COMPAT_H_ */

src/emu/sound/discrete.h

@@ -4128,7 +4128,7 @@ enum {
 #define IS_VALUE_A_NODE(val)    (((val) > NODE_START) && ((val) <= NODE_END))
 
 // Optional node such as used in CR_FILTER
-#define OPT_NODE(val)	(int) val
+#define OPT_NODE(val)   (int) val
 /*************************************
  *
  *  Enumerated values for Node types

src/emu/sound/es1373.c

@@ -2,7 +2,7 @@
 
 #define LOG_ES            (0)
 #define LOG_ES_REG        (0)
-#define LOG_ES_FILE      	(0)
+#define LOG_ES_FILE         (0)
 
 
 static MACHINE_CONFIG_FRAGMENT( es1373 )
@@ -122,7 +122,6 @@ void es1373_device::device_timer(emu_timer &timer, device_timer_id tid, int para
 //-------------------------------------------------
 void es1373_device::sound_stream_update(sound_stream &stream, stream_sample_t **inputs, stream_sample_t **outputs, int samples)
 {
-
 	if (m_dac1.enable) {
 		logerror("%s: sound_stream_update DAC1 not implemented yet\n", tag());
 	}

src/emu/sound/es1373.h

@@ -66,10 +66,10 @@
 #define SCTRL_P2_S_MASK       0x0000000C
 #define SCTRL_P1_S_MASK       0x00000003
 
-#define SCTRL_8BIT_MONO				0x0
+#define SCTRL_8BIT_MONO             0x0
-#define SCTRL_8BIT_STEREO			0x1
+#define SCTRL_8BIT_STEREO           0x1
-#define SCTRL_16BIT_MONO			0x2
+#define SCTRL_16BIT_MONO            0x2
-#define SCTRL_16BIT_STEREO		0x3
+#define SCTRL_16BIT_STEREO      0x3
 
 #define ES_PCI_READ 0
 #define ES_PCI_WRITE 1

src/emu/sound/l7a1045_l6028_dsp_a.c

@@ -1,84 +1,84 @@
 /***************************************************************************
 
     L7A1045 L6028 DSP-A
-	(QFP120 package)
+    (QFP120 package)
 
-	this is the audio chip used on the following
+    this is the audio chip used on the following
-	SNK Hyper NeoGeo 64 (arcade platform)
+    SNK Hyper NeoGeo 64 (arcade platform)
-	AKAI MPC3000 (synth)
+    AKAI MPC3000 (synth)
 
-	both are driven by a V53, the MPC3000 isn't dumped.
+    both are driven by a V53, the MPC3000 isn't dumped.
 
-	appears to write a register number and channel/voice using
+    appears to write a register number and channel/voice using
-	l7a1045_sound_select_w (offset 0)
+    l7a1045_sound_select_w (offset 0)
-	format:
+    format:
 
-	---- rrrr ---c cccc
+    ---- rrrr ---c cccc
-	r = register, c = channel
+    r = register, c = channel
 
-	the channel select appears to address 32 different voices (5-bits)
+    the channel select appears to address 32 different voices (5-bits)
-	the register select appears to use 4-bits with 0x0 to 0xa being valid
+    the register select appears to use 4-bits with 0x0 to 0xa being valid
 
-	the registers data is written / read using offsets 1,2,3 after
+    the registers data is written / read using offsets 1,2,3 after
-	setting the register + channel, this gives 3 16-bit values for
+    setting the register + channel, this gives 3 16-bit values for
-	each register.
+    each register.
 
-	register format:
+    register format:
 
-	   offset 3           offset 2           offset 1
+       offset 3           offset 2           offset 1
-	   fedcba9876543210 | fedcba9876543210 | fedcba9876543210
+       fedcba9876543210 | fedcba9876543210 | fedcba9876543210
 
-	0  ----------------   ----------------   ----------------
+    0  ----------------   ----------------   ----------------
 
-	1  ----------------   ----------------   ----------------
+    1  ----------------   ----------------   ----------------
 
-	2  ----------------   ----------------   ----------------
+    2  ----------------   ----------------   ----------------
 
-	3  ----------------   ----------------   ----------------
+    3  ----------------   ----------------   ----------------
 
-	4  ----------------   ----------------   ----------------
+    4  ----------------   ----------------   ----------------
 
-	5  ----------------   ----------------   ----------------
+    5  ----------------   ----------------   ----------------
 
-	6  ----------------   ----------------   ----------------
+    6  ----------------   ----------------   ----------------
 
-	7  ----------------   ----------------   llllllllrrrrrrrr left/right volume
+    7  ----------------   ----------------   llllllllrrrrrrrr left/right volume
 
-	8  ----------------   ----------------   ---------------- (read only?)
+    8  ----------------   ----------------   ---------------- (read only?)
 
-	9  ----------------   ----------------   ---------------- (read only?)
+    9  ----------------   ----------------   ---------------- (read only?)
 
-	a  ----------------   ----------------   ----------------
+    a  ----------------   ----------------   ----------------
 
-	Registers are not yet understood.
+    Registers are not yet understood.
 
-	probably sample start, end, loop positions, panning etc.
+    probably sample start, end, loop positions, panning etc.
-	like CPS3, Qsound etc.
+    like CPS3, Qsound etc.
 
-	case 0x00:
+    case 0x00:
-	case 0x01:
+    case 0x01:
-	case 0x02:
+    case 0x02:
-	case 0x03: // 00003fffffff (startup only?)
+    case 0x03: // 00003fffffff (startup only?)
-	case 0x04: // doesn't use 6
+    case 0x04: // doesn't use 6
-	case 0x05: // 00003fffffff (mostly, often)
+    case 0x05: // 00003fffffff (mostly, often)
-	case 0x06: // 00007ff0ffff mostly
+    case 0x06: // 00007ff0ffff mostly
-	case 0x07: // 0000000f0708 etc. (low values)
+    case 0x07: // 0000000f0708 etc. (low values)
-	case 0x08: // doesn't write to 2/4/6 with this set??
+    case 0x08: // doesn't write to 2/4/6 with this set??
-	case 0x09: // doesn't write to 2/4/6 with this set??
+    case 0x09: // doesn't write to 2/4/6 with this set??
-	case 0x0a: // random looking values
+    case 0x0a: // random looking values
 
-	Some of the other ports on the HNG64 sound CPU may also be tied
+    Some of the other ports on the HNG64 sound CPU may also be tied
-	to this chip, this isn't yet clear.
+    to this chip, this isn't yet clear.
-	Port $8 bit 8 is keyon, low byte is sound status related (masked with 0x7f)
+    Port $8 bit 8 is keyon, low byte is sound status related (masked with 0x7f)
 
-	Sample data format TBA
+    Sample data format TBA
+
+    TODO:
+    - Sample format needs to be double checked;
+    - Octave Control/BPM/Pitch, right now XRally Network BGM wants 66150 Hz which is definitely too fast for Terry Bogard speech;
+    - Key Off;
+    - ADSR (registers 2 & 4?);
 
-	TODO:
-	- Sample format needs to be double checked;
-	- Octave Control/BPM/Pitch, right now XRally Network BGM wants 66150 Hz which is definitely too fast for Terry Bogard speech;
-	- Key Off;
-	- ADSR (registers 2 & 4?);
-	
 ***************************************************************************/
 
 #include "emu.h"
@@ -132,7 +132,7 @@ void l7a1045_sound_device::sound_stream_update(sound_stream &stream, stream_samp
 	/* Clear the buffers */
 	memset(outputs[0], 0, samples*sizeof(*outputs[0]));
 	memset(outputs[1], 0, samples*sizeof(*outputs[1]));
-	
+
 	for (int i = 0; i < 32; i++)
 	{
 		if (m_key & (1 << i))
@@ -142,7 +142,7 @@ void l7a1045_sound_device::sound_stream_update(sound_stream &stream, stream_samp
 			UINT32 start = vptr->start;
 			UINT32 end = vptr->end;
 			UINT32 step  = 0x400;
-			
+
 			UINT32 pos = vptr->pos;
 			UINT32 frac = vptr->frac;
 
@@ -150,7 +150,7 @@ void l7a1045_sound_device::sound_stream_update(sound_stream &stream, stream_samp
 			{
 				INT32 sample;
 				UINT8 data;
-				
+
 				pos += (frac >> 12);
 				frac &= 0xfff;
 
@@ -205,7 +205,7 @@ READ16_MEMBER( l7a1045_sound_device::l7a1045_sound_r )
 		printf("sound_select_r?\n");
 	else
 		return sound_data_r(space,offset -1,mem_mask);
-		
+
 	return 0xffff;
 }
 
@@ -238,7 +238,7 @@ WRITE16_MEMBER(l7a1045_sound_device::sound_data_w)
 	l7a1045_voice *vptr = &m_voice[m_audiochannel];
 
 	//if(m_audioregister != 0 && m_audioregister != 1 && m_audioregister != 7)
-	//	printf("%04x %04x (%04x %04x)\n",offset,data,m_audioregister,m_audiochannel);
+	//  printf("%04x %04x (%04x %04x)\n",offset,data,m_audioregister,m_audiochannel);
 
 	m_audiodat[m_audioregister][m_audiochannel].dat[offset] = data;
 
@@ -277,9 +277,9 @@ WRITE16_MEMBER(l7a1045_sound_device::sound_data_w)
 
 				vptr->end &= m_rom_size - 1;
 			}
-			
+
 			break;
-		
+
 		case 0x07:
 
 			vptr->r_volume = (m_audiodat[m_audioregister][m_audiochannel].dat[0] & 0xff);
@@ -302,11 +302,11 @@ READ16_MEMBER(l7a1045_sound_device::sound_data_r)
 
 	switch(m_audioregister)
 	{
-		case 0x00: 
+		case 0x00:
 		{
 			UINT32 current_addr;
 			UINT16 res;
-			
+
 			current_addr = vptr->start + vptr->pos;
 			if(offset == 0)
 				res = (current_addr & 0xf) << 12; // TODO: frac
@@ -314,11 +314,11 @@ READ16_MEMBER(l7a1045_sound_device::sound_data_r)
 				res = (current_addr & 0xffff0) >> 4;
 			else
 				res = (current_addr & 0xf00000) >> 20;
-		
+
 			return res;
 		}
 	}
-	
+
 	return 0;
 }
 
@@ -333,16 +333,14 @@ WRITE16_MEMBER(l7a1045_sound_device::sound_status_w)
 		{
 		printf("%08x START\n",vptr->start);
 		printf("%08x END\n",vptr->end);
-		
+
 		for(int i=0;i<0x10;i++)
 			printf("%02x (%02x) = %04x%04x%04x\n",m_audiochannel,i,m_audiodat[i][m_audiochannel].dat[2],m_audiodat[i][m_audiochannel].dat[1],m_audiodat[i][m_audiochannel].dat[0]);
 		}
 		#endif
-		
+
 		vptr->frac = 0;
 		vptr->pos = 0;
 		m_key |= 1 << m_audiochannel;
 	}
 }
-
-

src/emu/sound/l7a1045_l6028_dsp_a.h

@@ -30,7 +30,7 @@ public:
 	l7a1045_sound_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock);
 	~l7a1045_sound_device() { }
 
-//	void set_base(INT8* base) { m_base = base; }
+//  void set_base(INT8* base) { m_base = base; }
 
 	DECLARE_WRITE16_MEMBER( l7a1045_sound_w );
 	DECLARE_READ16_MEMBER( l7a1045_sound_r );

src/emu/video.c

@@ -1215,7 +1215,7 @@ file_error video_manager::open_next(emu_file &file, const char *extension)
 		for (int seq = 0; ; seq++)
 		{
 			// build up the filename
-			fname.assign(snapstr);			
+			fname.assign(snapstr);
 			strprintf(seqtext, "%04d", seq);
 			strreplace(fname, "%i", seqtext.c_str());
 

src/emu/video/clgd542x.c

@@ -1,6 +1,6 @@
 /*
 
-	Cirrus Logic GD542x/3x video chipsets
+    Cirrus Logic GD542x/3x video chipsets
 
 */
 
@@ -126,7 +126,7 @@ void cirrus_gd5428_device::device_reset()
 	m_blt_source = m_blt_dest = m_blt_source_current = m_blt_dest_current = 0;
 	memset(m_ext_palette, 0, sizeof(m_ext_palette));
 	m_ext_palette_enabled = false;
-//	m_ext_palette[15].red = m_ext_palette[15].green = m_ext_palette[15].blue = 0xff;  // default?  Win3.1 doesn't seem to touch the extended DAC, or at least, it enables it, then immediately disables it then sets a palette...
+//  m_ext_palette[15].red = m_ext_palette[15].green = m_ext_palette[15].blue = 0xff;  // default?  Win3.1 doesn't seem to touch the extended DAC, or at least, it enables it, then immediately disables it then sets a palette...
 }
 
 UINT32 cirrus_gd5428_device::screen_update(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect)
@@ -201,7 +201,7 @@ UINT32 cirrus_gd5428_device::screen_update(screen_device &screen, bitmap_rgb32 &
 			}
 		}
 	}
-	return 0;	
+	return 0;
 }
 
 void cirrus_gd5428_device::cirrus_define_video_mode()
@@ -209,7 +209,7 @@ void cirrus_gd5428_device::cirrus_define_video_mode()
 	UINT8 divisor = 1;
 	float clock;
 	UINT8 clocksel = (vga.miscellaneous_output & 0xc) >> 2;
-	
+
 	svga.rgb8_en = 0;
 	svga.rgb15_en = 0;
 	svga.rgb16_en = 0;
@@ -226,7 +226,7 @@ void cirrus_gd5428_device::cirrus_define_video_mode()
 		clock = 14.31818f * ((float)numerator / ((float)denominator * mul));
 		clock *= 1000000;
 	}
-	
+
 	if (!gc_locked && (vga.sequencer.data[0x07] & 0x01))
 	{
 		switch(vga.sequencer.data[0x07] & 0x0E)
@@ -247,7 +247,7 @@ UINT16 cirrus_gd5428_device::offset()
 
 	if (svga.rgb8_en == 1) // guess
 		off <<= 2;
-//	popmessage("Offset: %04x  %s %s ** -- actual: %04x",vga.crtc.offset,vga.crtc.dw?"DW":"--",vga.crtc.word_mode?"BYTE":"WORD",off);
+//  popmessage("Offset: %04x  %s %s ** -- actual: %04x",vga.crtc.offset,vga.crtc.dw?"DW":"--",vga.crtc.word_mode?"BYTE":"WORD",off);
 	return off;
 }
 
@@ -259,7 +259,7 @@ void cirrus_gd5428_device::start_bitblt()
 
 	m_blt_source_current = m_blt_source;
 	m_blt_dest_current = m_blt_dest;
-	
+
 	for(y=0;y<m_blt_height;y++)
 	{
 		for(x=0;x<m_blt_width;x++)
@@ -289,13 +289,13 @@ void cirrus_gd5428_device::copy_pixel()
 {
 	UINT8 src = vga.memory[m_blt_source_current % vga.svga_intf.vram_size];
 	UINT8 dst = vga.memory[m_blt_dest_current % vga.svga_intf.vram_size];
-	
+
 	if(m_blt_mode & 0x40)  // enable 8x8 pattern
 	{
 		if(m_blt_mode & 0x80)  // colour expand
 			src = (vga.memory[m_blt_source % vga.svga_intf.vram_size] >> (abs((int)(m_blt_source_current - m_blt_source)) % 8)) & 0x01 ? 0xff : 0x00;
 	}
-	
+
 	switch(m_blt_rop)
 	{
 	case 0x00:  // BLACK
@@ -728,7 +728,7 @@ READ8_MEMBER(cirrus_gd5428_device::port_03c0_r)
 						vga.dac.read_index++;
 					}
 				}
-			}				
+			}
 			break;
 		case 0x0f:
 			res = cirrus_gc_reg_read(vga.gc.index);
@@ -767,9 +767,9 @@ WRITE8_MEMBER(cirrus_gd5428_device::port_03c0_w)
 						break;
 					}
 					vga.dac.dirty=1;
-					if (vga.dac.state==3) 
+					if (vga.dac.state==3)
 					{
-						vga.dac.state=0; 
+						vga.dac.state=0;
 						vga.dac.write_index++;
 					}
 				}
@@ -985,14 +985,14 @@ READ8_MEMBER(cirrus_gd5428_device::mem_r)
 
 	// Is the display address adjusted automatically when not using Chain-4 addressing?  The GD542x BIOS doesn't do it, but Virtual Pool expects it.
 	if(!(vga.sequencer.data[4] & 0x8))
-		addr <<= 2;	
+		addr <<= 2;
 
 	if(svga.rgb8_en || svga.rgb15_en || svga.rgb16_en || svga.rgb24_en)
 	{
 		UINT8 data = 0;
 		if(gc_mode_ext & 0x01)
 		{
-			if(offset & 0x10000) 
+			if(offset & 0x10000)
 				return 0;
 			if(offset < 0x8000)
 				offset &= 0x7fff;
@@ -1069,7 +1069,7 @@ READ8_MEMBER(cirrus_gd5428_device::mem_r)
 	{
 		// TODO: Lines up in 16-colour mode, likely different for 256-colour modes (docs say video addresses are shifted right 3 places)
 		UINT8 i,data;
-//		UINT8 bits = ((gc_mode_ext & 0x08) && (vga.gc.write_mode == 1)) ? 8 : 4;
+//      UINT8 bits = ((gc_mode_ext & 0x08) && (vga.gc.write_mode == 1)) ? 8 : 4;
 
 		data = 0;
 		//printf("%08x\n",offset);
@@ -1119,11 +1119,11 @@ WRITE8_MEMBER(cirrus_gd5428_device::mem_w)
 
 	// Is the display address adjusted automatically when using Chain-4 addressing?  The GD542x BIOS doesn't do it, but Virtual Pool expects it.
 	if(!(vga.sequencer.data[4] & 0x8))
-		addr <<= 2;	
+		addr <<= 2;
 
 	if(svga.rgb8_en || svga.rgb15_en || svga.rgb16_en || svga.rgb24_en)
 	{
-		if(offset & 0x10000) 
+		if(offset & 0x10000)
 			return;
 		if(gc_mode_ext & 0x01)
 		{
@@ -1163,7 +1163,7 @@ WRITE8_MEMBER(cirrus_gd5428_device::mem_w)
 			}
 			return;
 		}
-		
+
 		if(vga.sequencer.data[4] & 0x8)
 			vga.memory[(offset+addr) % vga.svga_intf.vram_size] = data;
 		else
@@ -1208,7 +1208,7 @@ WRITE8_MEMBER(cirrus_gd5428_device::mem_w)
 		{
 		// TODO: Lines up in 16-colour mode, likely different for 256-colour modes (docs say video addresses are shifted right 3 places)
 			UINT8 i;
-//			UINT8 bits = ((gc_mode_ext & 0x08) && (vga.gc.write_mode == 1)) ? 8 : 4;
+//          UINT8 bits = ((gc_mode_ext & 0x08) && (vga.gc.write_mode == 1)) ? 8 : 4;
 
 			for(i=0;i<4;i++)
 			{
@@ -1227,4 +1227,3 @@ WRITE8_MEMBER(cirrus_gd5428_device::mem_w)
 		}
 	}
 }
-

src/emu/video/clgd542x.h

@@ -1,6 +1,6 @@
 /*
 
-	Cirrus Logic GD542x/3x video chipsets
+    Cirrus Logic GD542x/3x video chipsets
 
 */
 
@@ -39,11 +39,11 @@ protected:
 	UINT8 gc_bank_1;
 	bool gc_locked;
 	UINT8 m_lock_reg;
-	
+
 	UINT8 m_cr19;
 	UINT8 m_cr1a;
 	UINT8 m_cr1b;
-	
+
 	// hardware cursor
 	UINT16 m_cursor_x;
 	UINT16 m_cursor_y;
@@ -64,13 +64,13 @@ protected:
 	UINT16 m_blt_width;
 	UINT32 m_blt_source_current;
 	UINT32 m_blt_dest_current;
-	
+
 	UINT8 m_scratchpad1;
 	UINT8 m_scratchpad2;
 	UINT8 m_scratchpad3;
 	UINT8 m_vclk_num[4];
 	UINT8 m_vclk_denom[4];
-	
+
 	inline UINT8 cirrus_vga_latch_write(int offs, UINT8 data);
 private:
 	void cirrus_define_video_mode();
@@ -80,7 +80,7 @@ private:
 	void cirrus_gc_reg_write(UINT8 index, UINT8 data);
 	UINT8 cirrus_crtc_reg_read(UINT8 index);
 	void cirrus_crtc_reg_write(UINT8 index, UINT8 data);
-	
+
 	void start_bitblt();
 	void copy_pixel();
 };
@@ -96,4 +96,3 @@ protected:
 // device type definition
 extern const device_type CIRRUS_GD5428;
 extern const device_type CIRRUS_GD5430;
-

src/emu/video/pc_vga.c

@@ -5547,5 +5547,3 @@ READ16_MEMBER(mach8_device::mach8_config2_r)
 {
 	return 0x0002;
 }
-
-

src/emu/video/pc_vga.h

@@ -175,8 +175,8 @@ protected:
 	/**/    UINT8 sldiv;
 	/**/    UINT8 map14;
 	/**/    UINT8 map13;
-	/**/	UINT8 irq_clear;
+	/**/    UINT8 irq_clear;
-	/**/	UINT8 irq_disable;
+	/**/    UINT8 irq_disable;
 		} crtc;
 
 		struct

src/lib/formats/c3040_dsk.c

@@ -51,9 +51,9 @@ const int c3040_format::c3040_sectors_per_track[] =
 const int c3040_format::c3040_gap2[] =
 {
 	11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, // 1-17
-	8, 8, 8, 8, 8, 8, 8, 											    // 18-24
+	8, 8, 8, 8, 8, 8, 8,                                                // 18-24
-	15, 15, 15, 15, 15, 15, 											// 25-30
+	15, 15, 15, 15, 15, 15,                                             // 25-30
-	12, 12, 12, 12, 12													// 31-35
+	12, 12, 12, 12, 12                                                  // 31-35
 };
 
 floppy_image_format_t::desc_e* c3040_format::get_sector_desc(const format &f, int &current_size, int sector_count, UINT8 id1, UINT8 id2, int gap_2)

src/lib/formats/c4040_dsk.c

@@ -41,9 +41,9 @@ const c4040_format::format c4040_format::file_formats[] = {
 const int c4040_format::c4040_gap2[] =
 {
 	11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, // 1-17
-	19, 19, 19, 19, 19, 19, 19, 									    // 18-24
+	19, 19, 19, 19, 19, 19, 19,                                         // 18-24
-	15, 15, 15, 15, 15, 15, 											// 25-30
+	15, 15, 15, 15, 15, 15,                                             // 25-30
-	12, 12, 12, 12, 12													// 31-35
+	12, 12, 12, 12, 12                                                  // 31-35
 };
 
 floppy_image_format_t::desc_e* c4040_format::get_sector_desc(const format &f, int &current_size, int sector_count, UINT8 id1, UINT8 id2, int gap_2)

src/lib/formats/c8280_dsk.c

@@ -30,32 +30,32 @@ const char *c8280_format::extensions() const
 }
 
 const c8280_format::format c8280_format::formats[] = {
-	// 80x4e 12x00 3xf6 fc 
+	// 80x4e 12x00 3xf6 fc
 	// 50x4e 12x00 3xf5 fe 2x00 01 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
 	// 54x4e 12x00 3xf5 fe 2x00 02 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
 	// 54x4e 12x00 3xf5 fe 2x00 03 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 04 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 04 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 05 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 05 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 06 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 06 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 07 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 07 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 08 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 08 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 09 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 09 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 0a 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 0a 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 0b 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 0b 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 0c 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 0c 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 0d 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 0d 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 0e 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 0e 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 0f 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 0f 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 10 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 10 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 11 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 11 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 12 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 12 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 13 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 13 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 14 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 14 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 15 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 15 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 16 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 16 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 17 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 17 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 18 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 18 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
-	// 54x4e 12x00 3xf5 fe 2x00 19 01 f7 22x4e 12x00 3xf5 fb 256xaa f7 
+	// 54x4e 12x00 3xf5 fe 2x00 19 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
 	// 54x4e 12x00 3xf5 fe 2x00 1a 01 f7 22x4e 12x00 3xf5 fb 256xaa f7
 	// 653x4e
 	{

src/lib/formats/flopimg.c

@@ -2835,7 +2835,7 @@ void floppy_image_format_t::extract_sectors_from_bitstream_gcr5(const UINT8 *bit
 	for(int i=0; i<track_size; i++) {
 		int bit = sbit_r(bitstream, i);
 		shift_reg = ((shift_reg << 1) | bit) & 0x3ff;
-		
+
 		if (sync && !bit) {
 			UINT8 id = sbyte_gcr5_r(bitstream, i, track_size);
 
@@ -2844,7 +2844,7 @@ void floppy_image_format_t::extract_sectors_from_bitstream_gcr5(const UINT8 *bit
 				if(hblk_count < 100)
 					hblk[hblk_count++] = i-10;
 				break;
-			
+
 			case 0x07:
 				if(dblk_count < 100)
 					dblk[dblk_count++] = i-10;
@@ -2914,7 +2914,7 @@ void floppy_image_format_t::extract_sectors_from_bitstream_victor_gcr5(const UIN
 	for(int i=0; i<track_size; i++) {
 		int bit = sbit_r(bitstream, i);
 		shift_reg = ((shift_reg << 1) | bit) & 0x3ff;
-		
+
 		if (sync && !bit) {
 			UINT8 id = sbyte_gcr5_r(bitstream, i, track_size);
 
@@ -2923,7 +2923,7 @@ void floppy_image_format_t::extract_sectors_from_bitstream_victor_gcr5(const UIN
 				if(hblk_count < 100)
 					hblk[hblk_count++] = i-10;
 				break;
-			
+
 			case 0x08:
 				if(dblk_count < 100)
 					dblk[dblk_count++] = i-10;

src/lib/formats/imd_dsk.c

@@ -137,15 +137,15 @@ static floperr_t imd_read_indexed_sector(floppy_image_legacy *floppy, int head,
 
 static floperr_t imd_expand_file(floppy_image_legacy *floppy , UINT64 offset , size_t amount)
 {
-        if (amount == 0) {
+		if (amount == 0) {
-                return FLOPPY_ERROR_SUCCESS;
+				return FLOPPY_ERROR_SUCCESS;
-        }
+		}
 
-        UINT64 file_size = floppy_image_size(floppy);
+		UINT64 file_size = floppy_image_size(floppy);
 
-        if (offset > file_size) {
+		if (offset > file_size) {
-                return FLOPPY_ERROR_INTERNAL;
+				return FLOPPY_ERROR_INTERNAL;
-        }
+		}
 
 	UINT64 size_after_off = file_size - offset;
 
@@ -466,10 +466,10 @@ bool imd_format::load(io_generic *io, UINT32 form_factor, floppy_image *image)
 
 		for(int i=0; i<sector_count; i++) {
 			UINT8 stype = img[pos++];
-			sects[i].track	     = tnum ? tnum[i] : track;
+			sects[i].track       = tnum ? tnum[i] : track;
-			sects[i].head	     = hnum ? hnum[i] : head;
+			sects[i].head        = hnum ? hnum[i] : head;
-			sects[i].sector	     = snum[i];
+			sects[i].sector      = snum[i];
-			sects[i].size	     = ssize;
+			sects[i].size        = ssize;
 			sects[i].actual_size = actual_size;
 
 			if(stype == 0 || stype > 8) {

src/lib/util/corestr.c

@@ -193,7 +193,7 @@ char *core_i64_format(UINT64 value, UINT8 mindigits, bool is_octal)
 }
 
 /*-------------------------------------------------
-	std::string helpers
+    std::string helpers
 -------------------------------------------------*/
 
 #include <algorithm>
@@ -312,4 +312,4 @@ int strreplace(std::string &str, const std::string& search, const std::string& r
 		str.erase(curindex, searchlen).insert(curindex, replace);
 	}
 	return matches;
-}
+}

src/lib/util/hashing.c

@@ -167,7 +167,7 @@ bool crc32_t::from_string(const char *string, int length)
 //-------------------------------------------------
 
 const char *crc32_t::as_string(std::string &buffer) const
-{	
+{
 	strprintf(buffer, "%08x", m_raw);
 	return buffer.c_str();
 }

src/lib/util/zippath.c

@@ -332,7 +332,7 @@ file_error zippath_fopen(const char *filename, UINT32 openflags, core_file *&fil
 				temp2.assign(mainpath).append(PATH_SEPARATOR).append(subpath);
 				subpath.assign(temp2);
 			}
-			else 
+			else
 			{
 				mainpath = mainpath.substr(temp.length());
 				subpath.assign(mainpath);

src/mame/audio/hng64.c

@@ -353,7 +353,7 @@ WRITE_LINE_MEMBER(hng64_state::tcu_tm2_cb)
 	//m_audiocpu->set_input_line(1, state? ASSERT_LINE :CLEAR_LINE);
 	//m_audiocpu->set_input_line(2, state? ASSERT_LINE :CLEAR_LINE);
 
-	
+
 	// NOT ACCURATE, just so that all the interrupts get triggered for now.
 	#if 0
 	static int i;

src/mame/audio/wiping.c

@@ -69,9 +69,9 @@ void wiping_sound_device::device_start()
 		voice->wave = &m_sound_prom[0];
 		voice->counter = 0;
 	}
-	
+
 	save_item(NAME(m_soundregs));
-	
+
 	for (int i = 0; i < MAX_VOICES; i++)
 	{
 		save_item(NAME(m_channel_list[i].frequency), i);

src/mame/audio/wiping.h

@@ -27,7 +27,7 @@ protected:
 
 	// sound stream update overrides
 	virtual void sound_stream_update(sound_stream &stream, stream_sample_t **inputs, stream_sample_t **outputs, int samples);
-	
+
 private:
 	// internal state
 

src/mame/drivers/bagman.c

@@ -574,7 +574,7 @@ static MACHINE_CONFIG_START( botanic, bagman_state )
 	MCFG_PALETTE_ADD("palette", 64)
 
 	MCFG_PALETTE_INIT_OWNER(bagman_state,bagman)
-	
+
 	/* sound hardware */
 	MCFG_SPEAKER_STANDARD_MONO("mono")
 
@@ -589,7 +589,7 @@ MACHINE_CONFIG_END
 
 static MACHINE_CONFIG_DERIVED( squaitsa, botanic )
 	MCFG_MACHINE_START_OVERRIDE(bagman_state, squaitsa)
-	
+
 	MCFG_SOUND_MODIFY("aysnd")
 	MCFG_AY8910_PORT_A_READ_CB(READ8(bagman_state, dial_input_p1_r))
 	MCFG_AY8910_PORT_B_READ_CB(READ8(bagman_state, dial_input_p2_r))

src/mame/drivers/bfm_sc5sw.c

@@ -12217,7 +12217,7 @@ ROM_START( sc5nunsme )
 ROM_END
 
 
-	
+
 ROM_START( sc5_3512 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
 	ROM_LOAD16_BYTE( "95426966.lo", 0x000001, 0x080000, CRC(70401984) SHA1(30c409ecba15e8ca8eedc67b677808ec2afde83a) )
@@ -12386,8 +12386,8 @@ ROM_START( sc5_3514 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009083.bin", 0x000000, 0x100000, CRC(f88b86e7) SHA1(626f6aaeb5e71de113e0b7715cf68386adbe5f86) )
 	ROM_LOAD( "95009084.bin", 0x100000, 0x100000, CRC(db16a8ff) SHA1(0fb5b7a5cc16e30a17cd85279b31443215135657) )
-ROM_END	
+ROM_END
-	
+
 ROM_START( sc5_3517 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
 	ROM_LOAD16_BYTE( "95428070.lo", 0x000001, 0x080000, CRC(f367368d) SHA1(80be2ab2bae77e7d2eb275a09c0f66e88c61431f) )
@@ -12414,8 +12414,8 @@ ROM_START( sc5_3517 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009087.bin", 0x000000, 0x100000, CRC(f6c4afa6) SHA1(0891cf1e8514fea6f676c27e0fef3e1098315f9d) )
 	ROM_LOAD( "95009088.bin", 0x100000, 0x100000, CRC(03340dd1) SHA1(71043502f18e0d74794700abf0a479d0da8a2718) )
-ROM_END		
+ROM_END
-	
+
 ROM_START( sc5_3524 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
 	ROM_LOAD16_BYTE( "95428074.lo", 0x000001, 0x080000, CRC(56c27552) SHA1(99a10071112cdb8096f9f82c07925ee246ba309d) )
@@ -12429,8 +12429,8 @@ ROM_START( sc5_3524 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009075.bin", 0x000000, 0x100000, CRC(ebf64ae7) SHA1(c7e696acdbf2565959d9b7c76544738d467747f8) )
 	ROM_LOAD( "95009076.bin", 0x100000, 0x100000, CRC(c066ee96) SHA1(ded6c8e778fe2f7055a006a49cc500184902d14b) )
-ROM_END			
+ROM_END
-	
+
 ROM_START( sc5_3515 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
 	ROM_LOAD16_BYTE( "95428102.lo", 0x000001, 0x080000, CRC(928d7368) SHA1(fe0f0e267086c70396a7767010ccb63fc04314a1) )
@@ -12440,8 +12440,8 @@ ROM_START( sc5_3515 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009096.bin", 0x000000, 0x100000, CRC(169abeea) SHA1(86e5509ac9b8d4c683e518cbcbadf7cfc5513a03) )
 	ROM_LOAD( "95009097.bin", 0x100000, 0x100000, CRC(ead286a6) SHA1(823e59c7c4ddecf65f84011dcc2ec37533cfcd5c) )
-ROM_END			
+ROM_END
-	
+
 ROM_START( sc5_3511 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF ) // PR3548 (PR3511)
 	ROM_LOAD16_BYTE( "95428124.lo", 0x000001, 0x080000, CRC(1fe615f3) SHA1(1a78c964824e01c8bd1ab44dd81feb8229d85cb9) )
@@ -12480,7 +12480,7 @@ ROM_START( sc5_3511 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009059.bin", 0x000000, 0x100000, CRC(a3264545) SHA1(94b324c93edad7975ee152a7daaf7f6d7b91cb5e) )
 	ROM_LOAD( "95009060.bin", 0x100000, 0x100000, CRC(3cb58cf3) SHA1(f1eaeba8633c42ef43b4b32deb154f0683d8d42a) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3513 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12522,8 +12522,8 @@ ROM_START( sc5_3513 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009079.bin", 0x000000, 0x100000, CRC(4c7d4c93) SHA1(0660160ced0b43c420ed8abd3572c11feb45065a) )
 	ROM_LOAD( "95009080.bin", 0x100000, 0x100000, CRC(08052a11) SHA1(44f76e02edaedf9ee4a11d7eb433df3127133c91) )
-ROM_END		
+ROM_END
-	
+
 ROM_START( sc5_3516 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
 	ROM_LOAD16_BYTE( "95428155.hi", 0x000000, 0x080000, CRC(07def814) SHA1(34aaa04ea1e5b3c3c2ce86a2405cc367ed1c1c49) )
@@ -12544,7 +12544,7 @@ ROM_START( sc5_3516 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009085.bin", 0x000000, 0x100000, CRC(b1d06a53) SHA1(f552a8996bb6da21493e742e274edadbfc39a7ce) )
 	ROM_LOAD( "95009086.bin", 0x100000, 0x100000, CRC(d686d21c) SHA1(041aa809d97a29a9cf9677ecf58bee0d3b33d3c9) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3530 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12558,7 +12558,7 @@ ROM_START( sc5_3530 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009226.bin", 0x000000, 0x100000, CRC(d2a48a2b) SHA1(16f5e56af424ba78bc3378984ef5caaa65dcd8ae) )
 	ROM_LOAD( "95009227.bin", 0x100000, 0x100000, CRC(f6eae9c0) SHA1(73092581d314e91e3472d95aa1a4cf0fea03d333) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3552 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12575,8 +12575,8 @@ ROM_START( sc5_3552 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009218.bin", 0x000000, 0x100000, CRC(07abc1b6) SHA1(b180e47dc0c17feb447563c3dc907aee2f10940f) )
 	ROM_LOAD( "95009219.bin", 0x100000, 0x100000, CRC(ba796f0a) SHA1(f0e772b0bde828c8491f19a52d42591749aea79a) )
-ROM_END		
+ROM_END
-	
+
 ROM_START( sc5_3551 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
 	ROM_LOAD16_BYTE( "95429166.lo", 0x000001, 0x080000, CRC(6a3e04bd) SHA1(337293ae08aa701fb69d8611c272dade257a06a7) )
@@ -12615,7 +12615,7 @@ ROM_START( sc5_3551 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009210.bin", 0x000000, 0x100000, CRC(ac43a79b) SHA1(e987337506d10f0d430eebbe9e736c905ea06ffd) )
 	ROM_LOAD( "95009211.bin", 0x100000, 0x100000, CRC(f2cc0e0f) SHA1(29fbf4cc573bd5eceda6d8b722b2708f5b2fb3d5) )
-ROM_END	
+ROM_END
 
 
 ROM_START( sc5_3525 )
@@ -12631,7 +12631,7 @@ ROM_START( sc5_3525 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009214.bin", 0x000000, 0x100000, CRC(0802e651) SHA1(6ef9e02fb62693109119f69315615cc854a9ec06) )
 	ROM_LOAD( "95009215.bin", 0x100000, 0x100000, CRC(7b7796a3) SHA1(4283a74ff62d0ecf4beaae5e1c8805e3bf8a2e25) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3553 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12659,7 +12659,7 @@ ROM_START( sc5_3553 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009234.bin", 0x000000, 0x100000, CRC(5604cf0e) SHA1(48d04af6e6bfa77828bd26fdcf60a9b70cfc7f84) )
 	ROM_LOAD( "95009235.bin", 0x100000, 0x100000, CRC(ec2f7228) SHA1(2921c80c29bff886c7a35b382b5569dd9636cd67) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3555 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12691,7 +12691,7 @@ ROM_START( sc5_3555 )
 
 	ROM_LOAD( "95009242.bin", 0x000000, 0x100000, CRC(d8695bed) SHA1(26225772f008c52a8e4af239bb19f68911ea09dc) )
 	ROM_LOAD( "95009243.bin", 0x000000, 0x100000, CRC(16d039ce) SHA1(097dfc1bbcbd0c2ce096246f4f4a82110b989fd0) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3519 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12723,7 +12723,7 @@ ROM_START( sc5_3519 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009208.bin", 0x000000, 0x100000, CRC(f6450dbf) SHA1(3c48a2ca3cd08bff0d47e7b98c7d1d16b537b216) )
 	ROM_LOAD( "95009209.bin", 0x100000, 0x100000, CRC(c4b8b089) SHA1(e305f4fbaad2f4b6f96303fcefe2caf60fa8566d) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3510 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12759,7 +12759,7 @@ ROM_START( sc5_3510 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009063.bin", 0x000000, 0x100000, CRC(52b4e9a1) SHA1(2ff66ed13b2307ebc24500b920585f9cf04b0f4e) )
 	ROM_LOAD( "95009064.bin", 0x100000, 0x100000, CRC(1a94524b) SHA1(f5fa0904682888131ae359671ceeff0336adf5dd) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3557 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -12781,7 +12781,7 @@ ROM_START( sc5_3557 )
 	ROM_REGION( 0x400000, "ymz", ROMREGION_ERASE00 )
 	ROM_LOAD( "95009238.bin", 0x000000, 0x100000, CRC(fba0d54b) SHA1(e1dc6404f54b08a6c20c37fae135ff550574d523) )
 	ROM_LOAD( "95009239.bin", 0x100000, 0x100000, CRC(f7770307) SHA1(00363906064bdd67e800944df3f8d85236d8bc4c) )
-ROM_END	
+ROM_END
 
 ROM_START( sc5_3451 )
 	ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASEFF )
@@ -13109,7 +13109,7 @@ ROM_START( sc5unsrt )
 	ROM_LOAD( "95008125.bin", 0x000000, 0x100000, CRC(ad1d69d5) SHA1(66d07488fdec6b1c65b41e20d74d5add22746334) )
 	ROM_LOAD( "95008126.bin", 0x100000, 0x100000, CRC(28f979a8) SHA1(ce480ab19b3066343bf88d2fda78dc6a71cd61e2) )
 ROM_END
-#endif	
+#endif
 
 extern int find_project_string(running_machine &machine, int addrxor, int mode);
 
@@ -15448,22 +15448,3 @@ GAME( 200?, sc5_z057   ,0,         bfm_sc5, bfm_sc5, bfm_sc5_state, sc5, ROT0, "
 GAME( 200?, sc5_z058   ,0,         bfm_sc5, bfm_sc5, bfm_sc5_state, sc5, ROT0, "BFM","Wok 'n' Roll (Scorpion 5)", GAME_IS_SKELETON_MECHANICAL )
 GAME( 200?, sc5_z059   ,0,         bfm_sc5, bfm_sc5, bfm_sc5_state, sc5, ROT0, "BFM","Aladdin (Scorpion 5)", GAME_IS_SKELETON_MECHANICAL )
 GAME( 200?, sc5_z060   ,0,         bfm_sc5, bfm_sc5, bfm_sc5_state, sc5, ROT0, "BFM","Hard Dk (Scorpion 5)", GAME_IS_SKELETON_MECHANICAL )
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

src/mame/drivers/cardline.c

@@ -14,7 +14,7 @@
  XTAL  4 MHz
 
  TODO:
- 	 Really understand ASIC chip
+     Really understand ASIC chip
 
 ***********************************/
 
@@ -103,7 +103,7 @@ MC6845_UPDATE_ROW( cardline_state::crtc_update_row )
 	// how this works.
 
 	if(m_video & 1)
-	 	gfx_ofs = 0;
+		gfx_ofs = 0;
 
 	if(m_video & 2)
 		gfx_ofs = 0x1000;

src/mame/drivers/cv1k.c

@@ -193,7 +193,7 @@ public:
 		m_eepromout(*this, "EEPROMOUT"),
 		m_idleramoffs(0),
 		m_idlepc(0)
-	 { }
+		{ }
 
 	required_device<sh34_base_device> m_maincpu;
 	required_device<epic12_device> m_blitter;

src/mame/drivers/galaxian.c

@@ -5246,7 +5246,7 @@ static MACHINE_CONFIG_DERIVED( jumpbug, galaxian_base )
 	MCFG_CPU_PROGRAM_MAP(jumpbug_map)
 
 	/* sound hardware */
-	MCFG_SOUND_ADD("8910.0", AY8910, GALAXIAN_PIXEL_CLOCK/3/2/2)	/* matches PCB video - unconfirmed */
+	MCFG_SOUND_ADD("8910.0", AY8910, GALAXIAN_PIXEL_CLOCK/3/2/2)    /* matches PCB video - unconfirmed */
 	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.50)
 MACHINE_CONFIG_END
 

src/mame/drivers/gambl186.c

@@ -41,7 +41,7 @@ public:
 		m_maincpu(*this, "maincpu") { }
 
 	required_device<cpu_device> m_maincpu;
-    int m_comms_state;
+	int m_comms_state;
 	int m_comms_ind;
 	UINT8 m_comms_data[1002];
 
@@ -60,52 +60,52 @@ ADDRESS_MAP_END
 
 READ16_MEMBER(gambl186_state::comms_r)
 {
-    if ((offset == 0) && ACCESSING_BITS_0_7) //port 680 == data
+	if ((offset == 0) && ACCESSING_BITS_0_7) //port 680 == data
-    {
+	{
-        if ((m_comms_state == 0x16) && (m_comms_ind < sizeof(m_comms_data)))
+		if ((m_comms_state == 0x16) && (m_comms_ind < sizeof(m_comms_data)))
-        {
+		{
-            return m_comms_data[m_comms_ind++];
+			return m_comms_data[m_comms_ind++];
-        }
+		}
-    }
+	}
-    else if (offset == 1) //port 681 == status
+	else if (offset == 1) //port 681 == status
-    {
+	{
-        if (m_comms_state == 0x16) //read mode?
+		if (m_comms_state == 0x16) //read mode?
-        {
+		{
-            return 2;
+			return 2;
-        }
+		}
-        else if (m_comms_state == 0x31) //write mode?
+		else if (m_comms_state == 0x31) //write mode?
-        {
+		{
-            return 4;
+			return 4;
-        }
+		}
-    }
+	}
 
-    return 0;
+	return 0;
 }
 
 WRITE16_MEMBER(gambl186_state::comms_w)
 {
-    if (offset == 0)
+	if (offset == 0)
-    {
+	{
-        if ((m_comms_state == 0x31) && (m_comms_ind < (sizeof(m_comms_data) - 2)))
+		if ((m_comms_state == 0x31) && (m_comms_ind < (sizeof(m_comms_data) - 2)))
-        {
+		{
-            m_comms_data[++m_comms_ind] = (UINT8) ~data;
+			m_comms_data[++m_comms_ind] = (UINT8) ~data;
-        }
+		}
-    }
+	}
-    else if (offset == 1)
+	else if (offset == 1)
-    {
+	{
-        if (m_comms_state != data)
+		if (m_comms_state != data)
-        {
+		{
-            m_comms_ind = 0;
+			m_comms_ind = 0;
-        }
+		}
 
-        m_comms_state = data;
+		m_comms_state = data;
 
-        if (data == 0x4e) //reset?
+		if (data == 0x4e) //reset?
-        {
+		{
-            m_comms_data[0] = 5;
+			m_comms_data[0] = 5;
-            m_comms_data[sizeof(m_comms_data) - 1] = 0xec;
+			m_comms_data[sizeof(m_comms_data) - 1] = 0xec;
-        }
+		}
-    }
+	}
 }
 
 static ADDRESS_MAP_START( gambl186_io, AS_IO, 16, gambl186_state )

src/mame/drivers/gei.c

@@ -2017,4 +2017,3 @@ GAME( 1992, sexappl,  0,        findout,  sexappl, driver_device,  0,       ROT0
 
 GAME( 1992, geimulti, 0,        geimulti, geimulti, gei_state, geimulti,    ROT0, "Grayhound Electronics", "GEI Multi Game",                          GAME_IMPERFECT_GRAPHICS | GAME_IMPERFECT_SOUND )
 GAME( 1992, sprtauth, 0,        sprtauth, sprtauth, gei_state, geimulti,    ROT0, "Classic Games",         "Sports Authority",                        GAME_IMPERFECT_GRAPHICS | GAME_IMPERFECT_SOUND )
-

src/mame/drivers/headonb.c

@@ -51,9 +51,9 @@ public:
 	DECLARE_WRITE8_MEMBER(video_ram_w);
 
 	virtual void video_start();
-	
+
 	UINT32 screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect);
-	
+
 	TILE_GET_INFO_MEMBER(get_tile_info);
 };
 

src/mame/drivers/hexion.c

@@ -332,4 +332,3 @@ ROM_END
 
 GAME( 1992, hexion, 0,      hexion, hexion, driver_device, 0, ROT0, "Konami",                     "Hexion (Japan ver JAB)", 0 )
 GAME( 1992, hexionb,hexion, hexionb,hexion, driver_device, 0, ROT0, "bootleg (Impeuropex Corp.)", "Hexion (Asia ver AAA, bootleg)", 0 ) // we're missing an original Asia AAA
-