From 885f24ffa6d3c27cda2ca0c8ea59fda92d8b3b52 Mon Sep 17 00:00:00 2001 From: Guru Date: Tue, 4 Aug 2015 13:50:38 +0800 Subject: [PATCH] naomi.c: added trackball I/O board ROM to otrigger --- src/mame/drivers/naomi.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/src/mame/drivers/naomi.c b/src/mame/drivers/naomi.c index 1fa7b27fd20..5d966988884 100644 --- a/src/mame/drivers/naomi.c +++ b/src/mame/drivers/naomi.c @@ -1000,9 +1000,8 @@ Notes: (most info taken from poor quality pics/scans, better info is needed) |LED CN4 IC4 | |--------------------| Notes: - This is the I/O board used for Dynamic Golf which is - located under the panel. It's also used for spinner - controls such as those used on Outtrigger. + This is the I/O board used for Dynamic Golf and Out Trigger for the trackball + and is located under the panel. It must be daisy-chained to the normal I/O board with a USB cable. CN1 - 24 pin connector (not used on Dynamic Golf, other use unknown) @@ -1027,7 +1026,7 @@ Sega's I/O board has: - analog input - USB input (connect to NAOMI motherboard) - USB output (not used) -- shrinked D-sub 15pin connector (connect JVS video output, the signal is routed to JAMMA connector, signal is amplified to 3Vp-p and H/V sync signal is mixed (composite)) +- D-sub 15pin VGA-compatible connector (connect JVS video output, the signal is routed to JAMMA connector, signal is amplified to 3Vp-p and H/V sync signal is mixed (composite)) - external I/O connector (JST 12pin) - switch to select function of external I/O connector (extra button input or 7-seg LED(x2) output of total wins for 'Versus City' cabinet) - spare audio input (the signal goes to JAMMA speaker output) @@ -1397,8 +1396,8 @@ Notes: Development ROM board: -few unreleased and many prototype game versions known to exist on this ROM board, -currently only Rumble Fish 2 prototype dumped +There are a few unreleased and many prototype game versions known to exist on this ROM board. +Currently only Rumble Fish 2 prototype is dumped. PC BD SYSTEMX 3MODE FLASH Rev.B 1111-00001402 @@ -5091,6 +5090,9 @@ ROM_START( otrigger ) NAOMI_BIOS NAOMI_DEFAULT_EEPROM + ROM_REGION( 0x10000, "io_board", 0) + ROM_LOAD("epr-22084.ic3", 0x0000, 0x10000, CRC(18cf58bb) SHA1(1494f8215231929e41bbe2a133658d01882fbb0f) ) + ROM_REGION( 0xa000000, "rom_board", ROMREGION_ERASEFF) ROM_LOAD("epr-22163.ic22", 0x0000000, 0x0400000, CRC(3bdafb6a) SHA1(c4c5a4ba94d85c4353df22d70bb08be67e9c22c3) ) ROM_LOAD("mpr-22142.ic1", 0x0800000, 0x0800000, CRC(5b45fa35) SHA1(7d3fbecc6f0dce2b13bfb21ed68f44632b91b94b) )