mirror of
https://github.com/holub/mame
synced 2025-05-15 10:28:16 +03:00
(MESS) excalibur : floppies are working (nw)
This commit is contained in:
Robert
parent
0846c5295b
commit
927602a816
@ -12,18 +12,22 @@ We have Basic 1.1. Other known versions are 1.01, 2.1
|
||||
There are 2 versions of the colour prom, which have different palettes.
|
||||
We have the later version.
|
||||
|
||||
Control W then Enter will switch between 40 and 80 characters per line.
|
||||
Notes:
|
||||
- Control W then Enter will switch between 40 and 80 characters per line.
|
||||
- Control V turns cursor on
|
||||
- Graphics commands such as LINE, CIRCLE, HGRCLS, HGRSET etc only work with disk basic
|
||||
|
||||
ToDo:
|
||||
- Colours are approximate.
|
||||
- Disk controller
|
||||
- Graphics commands such as LINE and CIRCLE produce a syntax error.
|
||||
- Some commands such as HGRCLS are missing from the rom. Perhaps we need a later version?
|
||||
- Issues with bitmap graphics
|
||||
- Disk controller, works with old wd17xx but crashes on new wd.
|
||||
- Hardware supports 8 and 5.25 inch floppies, but we only support 5.25 as this
|
||||
is the only software that exists.
|
||||
- The schematic shows the audio counter connected to 2MHz, but this produces
|
||||
sounds that are too high. Connected to 1MHz for now.
|
||||
- Serial
|
||||
- Parallel / Centronics
|
||||
- Need software
|
||||
- Need more software
|
||||
- Pasting can sometimes drop a character.
|
||||
|
||||
****************************************************************************/
|
||||
@ -44,6 +48,8 @@ ToDo:
|
||||
#include "sound/wave.h"
|
||||
#include "sound/speaker.h"
|
||||
#include "machine/z80dma.h"
|
||||
#include "machine/rescap.h"
|
||||
#include "machine/74123.h"
|
||||
#if NEWFDC
|
||||
#include "machine/wd_fdc.h"
|
||||
#include "formats/excali64_dsk.h"
|
||||
@ -64,6 +70,7 @@ public:
|
||||
, m_crtc(*this, "crtc")
|
||||
, m_io_keyboard(*this, "KEY")
|
||||
, m_dma(*this, "dma")
|
||||
, m_u12(*this, "u12")
|
||||
, m_fdc(*this, "fdc")
|
||||
#if NEWFDC
|
||||
, m_floppy0(*this, "fdc:0")
|
||||
@ -92,6 +99,7 @@ public:
|
||||
MC6845_UPDATE_ROW(update_row);
|
||||
DECLARE_WRITE_LINE_MEMBER(crtc_de);
|
||||
DECLARE_WRITE_LINE_MEMBER(crtc_vs);
|
||||
DECLARE_WRITE8_MEMBER(motor_w);
|
||||
DECLARE_MACHINE_RESET(excali64);
|
||||
required_device<palette_device> m_palette;
|
||||
|
||||
@ -103,11 +111,13 @@ private:
|
||||
UINT8 m_kbdrow;
|
||||
bool m_crtc_vs;
|
||||
bool m_crtc_de;
|
||||
bool m_motor;
|
||||
required_device<cpu_device> m_maincpu;
|
||||
required_device<cassette_image_device> m_cass;
|
||||
required_device<mc6845_device> m_crtc;
|
||||
required_ioport_array<8> m_io_keyboard;
|
||||
required_device<z80dma_device> m_dma;
|
||||
required_device<ttl74123_device> m_u12;
|
||||
#if NEWFDC
|
||||
required_device<wd2793_t> m_fdc;
|
||||
required_device<floppy_connector> m_floppy0;
|
||||
@ -256,14 +266,27 @@ static const floppy_interface excali64_floppy_interface =
|
||||
};
|
||||
#endif
|
||||
|
||||
// pulses from port E4 bit 5 restart the 74123. After 3.6 secs without a pulse, the motor gets turned off.
|
||||
WRITE8_MEMBER( excali64_state::motor_w )
|
||||
{
|
||||
m_motor = BIT(data, 0);
|
||||
#if NEWFDC
|
||||
m_floppy0->get_device()->mon_w(!m_motor);
|
||||
#else
|
||||
//const char *floppy_tags[4] = { FLOPPY_0, FLOPPY_1, FLOPPY_2, FLOPPY_3 };
|
||||
legacy_floppy_image_device *flop = subdevice<legacy_floppy_image_device>(FLOPPY_0);
|
||||
flop->floppy_mon_w(!m_motor); // motor on
|
||||
//flop->floppy_drive_set_ready_state(1, 0); // this is commented out in flopdrv.c, so does nothing
|
||||
#endif
|
||||
}
|
||||
|
||||
READ8_MEMBER( excali64_state::porte8_r )
|
||||
{
|
||||
return 0xff;
|
||||
return 0xfc | (UINT8)m_motor;
|
||||
}
|
||||
|
||||
WRITE8_MEMBER( excali64_state::porte4_w )
|
||||
{
|
||||
//printf("%X ",data);
|
||||
#if NEWFDC
|
||||
floppy_image_device *floppy = NULL;
|
||||
if (BIT(data, 0)) floppy = m_floppy0->get_device();
|
||||
@ -272,32 +295,24 @@ WRITE8_MEMBER( excali64_state::porte4_w )
|
||||
if (floppy)
|
||||
floppy->ss_w(BIT(data, 4));
|
||||
#else
|
||||
UINT8 i;
|
||||
for (i = 0; i < 4; i++)
|
||||
{
|
||||
if BIT(data, i)
|
||||
{
|
||||
m_fdc->set_drive(i);
|
||||
break;
|
||||
}
|
||||
}
|
||||
//if (data & 0x01) m_fdc->set_drive(0);
|
||||
//if (data & 0x02) m_fdc->set_drive(1);
|
||||
//if (data & 0x04) m_fdc->set_drive(2);
|
||||
//if (data & 0x08) m_fdc->set_drive(3);
|
||||
//if (data & 0x10) m_fdc->set_side((data & 0x10) >> 4);
|
||||
const char *floppy_tags[4] = { FLOPPY_0, FLOPPY_1, FLOPPY_2, FLOPPY_3 };
|
||||
//UINT8 i;
|
||||
//for (i = 0; i < 4; i++)
|
||||
//{
|
||||
// if BIT(data, i)
|
||||
// {
|
||||
// m_fdc->set_drive(i);
|
||||
// break;
|
||||
// }
|
||||
//}
|
||||
if BIT(data, 0) m_fdc->set_drive(0);
|
||||
//if BIT(data, 1) m_fdc->set_drive(1);
|
||||
//if BIT(data, 2) m_fdc->set_drive(2);
|
||||
//if BIT(data, 3) m_fdc->set_drive(3);
|
||||
m_fdc->set_side(BIT(data, 4));
|
||||
|
||||
m_fdc->dden_w(1);//!BIT(data, 6)); // we want double density
|
||||
//if ((data & 0x04) == 0) // reset
|
||||
//m_fdc->reset();
|
||||
|
||||
// bit 3 connected to pin 23 "HRDY" of FDC
|
||||
// TEMP HACK, FDD motor and RDY FDC pin controlled by HLD pin of FDC
|
||||
legacy_floppy_image_device *flop = subdevice<legacy_floppy_image_device>(floppy_tags[i]);
|
||||
flop->floppy_mon_w(0); // motor on
|
||||
flop->floppy_drive_set_ready_state(1, 0);
|
||||
#endif
|
||||
m_u12->b_w(space,offset, BIT(data, 5));
|
||||
}
|
||||
|
||||
WRITE8_MEMBER( excali64_state::portec_w )
|
||||
@ -624,15 +639,16 @@ static MACHINE_CONFIG_START( excali64, excali64_state )
|
||||
MCFG_CASSETTE_ADD( "cassette" )
|
||||
#if NEWFDC
|
||||
MCFG_WD2793x_ADD("fdc", XTAL_16MHz / 16)
|
||||
MCFG_WD_FDC_FORCE_READY
|
||||
MCFG_WD_FDC_DRQ_CALLBACK(DEVWRITELINE("dma", z80dma_device, rdy_w))
|
||||
MCFG_FLOPPY_DRIVE_ADD("fdc:0", excali64_floppies, "525dd", floppy_image_device::default_floppy_formats)// excali64_state::floppy_formats)
|
||||
MCFG_FLOPPY_DRIVE_ADD("fdc:1", excali64_floppies, "525dd", floppy_image_device::default_floppy_formats)
|
||||
//MCFG_FLOPPY_DRIVE_ADD("fdc:1", excali64_floppies, "525dd", floppy_image_device::default_floppy_formats)
|
||||
#else
|
||||
MCFG_DEVICE_ADD("fdc", WD2793, 0)
|
||||
MCFG_WD17XX_DEFAULT_DRIVE4_TAGS
|
||||
//MCFG_WD17XX_INTRQ_CALLBACK(WRITELINE(nascom1_state, nascom2_fdc_intrq_w))
|
||||
//MCFG_WD17XX_DRQ_CALLBACK(WRITELINE(nascom1_state, nascom2_fdc_drq_w))
|
||||
//MCFG_WD17XX_DDEN_CALLBACK(VCC)
|
||||
MCFG_LEGACY_FLOPPY_4_DRIVES_ADD(excali64_floppy_interface)
|
||||
MCFG_WD17XX_DEFAULT_DRIVE1_TAGS
|
||||
MCFG_WD17XX_DRQ_CALLBACK(DEVWRITELINE("dma", z80dma_device, rdy_w))
|
||||
MCFG_LEGACY_FLOPPY_DRIVE_ADD(FLOPPY_0, excali64_floppy_interface)
|
||||
//MCFG_LEGACY_FLOPPY_4_DRIVES_ADD(excali64_floppy_interface)
|
||||
#endif
|
||||
MCFG_DEVICE_ADD("dma", Z80DMA, XTAL_16MHz/4)
|
||||
MCFG_Z80DMA_OUT_BUSREQ_CB(WRITELINE(excali64_state, busreq_w))
|
||||
@ -640,6 +656,15 @@ static MACHINE_CONFIG_START( excali64, excali64_state )
|
||||
MCFG_Z80DMA_OUT_MREQ_CB(WRITE8(excali64_state, memory_write_byte))
|
||||
MCFG_Z80DMA_IN_IORQ_CB(READ8(excali64_state, io_read_byte))
|
||||
MCFG_Z80DMA_OUT_IORQ_CB(WRITE8(excali64_state, io_write_byte))
|
||||
|
||||
MCFG_DEVICE_ADD("u12", TTL74123, 0)
|
||||
MCFG_TTL74123_CONNECTION_TYPE(TTL74123_GROUNDED) /* the hook up type (no idea what this means */
|
||||
MCFG_TTL74123_RESISTOR_VALUE(RES_K(100)) /* resistor connected between RCext & 5v */
|
||||
MCFG_TTL74123_CAPACITOR_VALUE(CAP_U(100)) /* capacitor connected between Cext and RCext */
|
||||
MCFG_TTL74123_A_PIN_VALUE(0) /* A pin - grounded */
|
||||
MCFG_TTL74123_B_PIN_VALUE(1) /* B pin - driven by port e4 bit 5 */
|
||||
MCFG_TTL74123_CLEAR_PIN_VALUE(1) /* Clear pin - pulled high */
|
||||
MCFG_TTL74123_OUTPUT_CHANGED_CB(WRITE8(excali64_state, motor_w))
|
||||
MACHINE_CONFIG_END
|
||||
|
||||
/* ROM definition */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user