mirror of
https://github.com/holub/mame
synced 2025-05-17 03:10:43 +03:00
MPU4 Changes: [AGEMAME]
* Added fix for lamp 'open circuit' errors which in turn make Connect 4 work better. * Fixed layout typo that caused the wrong piece to be displayed in Connect 4. * Documented the DUART and PTM better in MPU4 to allow for sampled sound changes later. * Changed 'serial_card_connected_ to link 7a, as it is the jumper on the ROM card that changes the IRQ priority, not the serial interface itself.
This commit is contained in:
Phil Bennett
parent
069cfa6e41
commit
a5d5e5d1f4
@ -18,46 +18,8 @@
|
||||
30-01-2007: J Wallace: Characteriser rewritten to run the 'extra' data needed by some games.
|
||||
24-01-2007: J Wallace: With thanks to Canonman and HIGHWAYMAN/System 80, I was able to confirm a seemingly
|
||||
ghastly misuse of a PIA is actually on the real hardware. This fixes the meters.
|
||||
30-12-2006: J Wallace: Fixed init routines, state saving is theoretically supported.
|
||||
23-09-2006: Converted 7Segment code to cleaner version, but have yet to add new 16k EPROM, as
|
||||
the original image was purported to come from a Barcrest BBS service, and is probably
|
||||
more 'official'.
|
||||
07-09-2006: It appears that the video firmware is intended to be a 16k EPROM, not 64k as dumped.
|
||||
In fact, the current dump is just the code repeated 4 times, when nothing earlier than
|
||||
0xC000 is ever called. Presumably, the ROM is loaded into C000, and the remainder of the
|
||||
'ROM' space is in fact the extra 32k of RAM apparently needed to hold the video board data.
|
||||
For now, we'll continue to use the old dump, as I am unsure as to how to map this in MAME.
|
||||
Changed Turn Over's name, it's either 12 Pound or 20 Pound Turn Over, depending on settings.
|
||||
|
||||
At this stage, I cannot see how to progress any further with the emulation, so I have transferred
|
||||
a non-AWP version of this driver to MAME for further study.
|
||||
|
||||
06-09-2006: Connect 4 added - VFD is currently reversed, although it looks to me like
|
||||
that's the correct behaviour, and that my 'correction' for Old Timer was wrong.
|
||||
AY sound does work, but is horrendous - presumably there's a filter on the
|
||||
sound that I haven't spotted. Trackball is apparently connected to AUX1, via
|
||||
Schmitt triggers - I wish I had a clue what this meant (El Condor).
|
||||
|
||||
05-09-2006: And the award for most bone-headed bug goes to.. me! the 6840 handler wasn't
|
||||
resetting the clocks after timeout, so the wave frequencies were way off.
|
||||
Machines now hang on reset due to a lack of reel support.
|
||||
CHR decoding now included, but still requires knowledge of the data table
|
||||
location - this should be present in the ROMs somewhere.
|
||||
|
||||
11-08-2006: It appears that the PIA IRQ's are not connected after all - but even
|
||||
disabling these won't get around the PTM issues.
|
||||
It also looks like the video card CHR is just a word-based version
|
||||
of the original, byte-based chip, meaning that should be fairly simple
|
||||
to emulate too, when the time comes.
|
||||
|
||||
08-07-2006: Revised mapping of peripherals, and found method of calculating CHR
|
||||
values - although their use is still unknown.
|
||||
|
||||
11-05-2006: El Condor, working from schematics and photos at present
|
||||
28-04-2006: El Condor
|
||||
20-05-2004: Re-Animator
|
||||
|
||||
See http://agemame.mameworld.info/techinfo/mpu4.php for Information.
|
||||
See http://agemame.mameworld.info/techinfo/mpu4.php for Information.
|
||||
|
||||
--- Board Setup ---
|
||||
|
||||
@ -78,12 +40,6 @@ up to a point, adding extra lamp support, different amounts of RAM, and (in many
|
||||
and related PIA and PTM for improved audio (This was eventually made the only way to generate sound in MOD4 of the hardware,
|
||||
when the AY8913 was removed from the main board)
|
||||
|
||||
Everything here is preliminary... the boards are quite fussy with regards their self tests
|
||||
and the timing may have to be perfect for them to function correctly. (as the comms are
|
||||
timer driven, the video is capable of various raster effects etc.)
|
||||
|
||||
Datasheets are available for the main components, The AGEMAME site mirrors a few of the harder-to-find ones.
|
||||
|
||||
--- Preliminary MPU4 Memorymap ---
|
||||
|
||||
(NV) indicates an item which is not present on the video version, which has a Comms card instead.
|
||||
@ -248,7 +204,6 @@ TODO: - Fix lamp timing, MAME doesn't update fast enough to see everything
|
||||
#include "machine/6840ptm.h"
|
||||
#include "machine/nvram.h"
|
||||
|
||||
#include "deprecat.h"
|
||||
#include "cpu/m6809/m6809.h"
|
||||
#include "sound/ay8910.h"
|
||||
#include "sound/okim6376.h"
|
||||
@ -292,9 +247,10 @@ static int IC23GB;
|
||||
static int IC23GA;
|
||||
static int prot_col;
|
||||
static int lamp_col;
|
||||
static int reel_flag;
|
||||
static int ic23_active;
|
||||
static int led_extend;
|
||||
static int serial_card_connected;
|
||||
static int link7a_connected;
|
||||
static int multiplex_smooth;
|
||||
static emu_timer *ic24_timer;
|
||||
static TIMER_CALLBACK( ic24_timeout );
|
||||
@ -460,7 +416,7 @@ static WRITE_LINE_DEVICE_HANDLER( cpu0_irq )
|
||||
device_t *pia6 = device->machine->device("pia_ic6");
|
||||
device_t *pia7 = device->machine->device("pia_ic7");
|
||||
device_t *pia8 = device->machine->device("pia_ic8");
|
||||
device_t *ptm6840 = device->machine->device("6840ptm");
|
||||
device_t *ptm2 = device->machine->device("ptm_ic2");
|
||||
|
||||
/* The PIA and PTM IRQ lines are all connected to a common PCB track, leading directly to the 6809 IRQ line. */
|
||||
int combined_state = pia6821_get_irq_a(pia3) | pia6821_get_irq_b(pia3) |
|
||||
@ -469,9 +425,9 @@ static WRITE_LINE_DEVICE_HANDLER( cpu0_irq )
|
||||
pia6821_get_irq_a(pia6) | pia6821_get_irq_b(pia6) |
|
||||
pia6821_get_irq_a(pia7) | pia6821_get_irq_b(pia7) |
|
||||
pia6821_get_irq_a(pia8) | pia6821_get_irq_b(pia8) |
|
||||
ptm6840_get_irq(ptm6840);
|
||||
ptm6840_get_irq(ptm2);
|
||||
|
||||
if (!serial_card_connected)
|
||||
if (!link7a_connected)
|
||||
{
|
||||
cputag_set_input_line(device->machine, "maincpu", M6809_IRQ_LINE, combined_state ? ASSERT_LINE : CLEAR_LINE);
|
||||
LOG(("6809 int%d \n", combined_state));
|
||||
@ -483,10 +439,11 @@ static WRITE_LINE_DEVICE_HANDLER( cpu0_irq )
|
||||
}
|
||||
}
|
||||
|
||||
static WRITE_LINE_DEVICE_HANDLER( cpu0_irq_m6840 )
|
||||
/*static WRITE_LINE_DEVICE_HANDLER( cpu0_irq_m6840 )
|
||||
{
|
||||
cpu0_irq(device->machine->device("pia_ic3"), state);
|
||||
}
|
||||
// cpu0_irq(device->machine->device("pia_ic3"), state);
|
||||
cpu0_irq(device->machine->device("6840ptm"), state);
|
||||
}*/
|
||||
|
||||
|
||||
/* Bankswitching */
|
||||
@ -538,7 +495,7 @@ static const ptm6840_interface ptm_ic2_intf =
|
||||
{ DEVCB_HANDLER(ic2_o1_callback),
|
||||
DEVCB_HANDLER(ic2_o2_callback),
|
||||
DEVCB_HANDLER(ic2_o3_callback) },
|
||||
DEVCB_LINE(cpu0_irq_m6840)
|
||||
DEVCB_LINE(cpu0_irq)//_m6840)
|
||||
};
|
||||
|
||||
|
||||
@ -710,6 +667,7 @@ static READ8_DEVICE_HANDLER( pia_ic4_portb_r )
|
||||
if ( signal_50hz ) ic4_input_b |= 0x04; /* 50 Hz */
|
||||
else ic4_input_b &= ~0x04;
|
||||
|
||||
ic4_input_b |= 0x02; //By triggering the overcurrent circuit here, we can make the MPU4 lamp test pass.
|
||||
#ifdef UNUSED_FUNCTION
|
||||
if ( lamp_overcurrent ) ic4_input_b |= 0x02;
|
||||
if ( lamp_undercurrent ) ic4_input_b |= 0x01;
|
||||
@ -728,7 +686,11 @@ static WRITE_LINE_DEVICE_HANDLER( pia_ic4_ca2_w )
|
||||
ic23_update();
|
||||
}
|
||||
|
||||
|
||||
static WRITE_LINE_DEVICE_HANDLER( pia_ic4_cb2_w )
|
||||
{
|
||||
LOG_IC3(("%s: IC4 PIA Write CA (input MUX strobe /LED B), %02X\n", cpuexec_describe_context(device->machine),state));
|
||||
reel_flag=state;
|
||||
}
|
||||
static const pia6821_interface pia_ic4_intf =
|
||||
{
|
||||
DEVCB_NULL, /* port A in */
|
||||
@ -740,7 +702,7 @@ static const pia6821_interface pia_ic4_intf =
|
||||
DEVCB_HANDLER(pia_ic4_porta_w), /* port A out */
|
||||
DEVCB_NULL, /* port B out */
|
||||
DEVCB_LINE(pia_ic4_ca2_w), /* line CA2 out */
|
||||
DEVCB_NULL, /* port CB2 out */
|
||||
DEVCB_LINE(pia_ic4_cb2_w), /* line CB2 out */
|
||||
DEVCB_LINE(cpu0_irq), /* IRQA */
|
||||
DEVCB_LINE(cpu0_irq) /* IRQB */
|
||||
};
|
||||
@ -869,7 +831,7 @@ static WRITE8_DEVICE_HANDLER( pia_ic6_portb_w )
|
||||
stepper_update(0, data & 0x0F );
|
||||
stepper_update(1, (data>>4) & 0x0F );
|
||||
|
||||
/* if ( pia6821_get_output_cb2(1)) */
|
||||
if (reel_flag)
|
||||
{
|
||||
if ( stepper_optic_state(0) ) optic_pattern |= 0x01;
|
||||
else optic_pattern &= ~0x01;
|
||||
@ -941,7 +903,7 @@ static WRITE8_DEVICE_HANDLER( pia_ic7_porta_w )
|
||||
stepper_update(2, data & 0x0F );
|
||||
stepper_update(3, (data >> 4)& 0x0F );
|
||||
|
||||
/* if ( pia6821_get_output_cb2(1)) */
|
||||
if (reel_flag)
|
||||
{
|
||||
if ( stepper_optic_state(2) ) optic_pattern |= 0x04;
|
||||
else optic_pattern &= ~0x04;
|
||||
@ -1542,7 +1504,7 @@ static MACHINE_START( mpu4mod2 )
|
||||
{
|
||||
mpu4_config_common(machine);
|
||||
|
||||
serial_card_connected=0;
|
||||
link7a_connected=0;
|
||||
mod_number=2;
|
||||
|
||||
/* setup 8 mechanical meters */
|
||||
@ -1562,7 +1524,7 @@ static MACHINE_START( mpu4dutch )
|
||||
{
|
||||
mpu4_config_common(machine);
|
||||
|
||||
serial_card_connected=0;
|
||||
link7a_connected=0;
|
||||
|
||||
// setup 8 mechanical meters ////////////////////////////////////////////
|
||||
Mechmtr_init(8);
|
||||
@ -1581,7 +1543,7 @@ static MACHINE_START( mpu4mod4 )
|
||||
{
|
||||
mpu4_config_common(machine);
|
||||
|
||||
serial_card_connected=0;
|
||||
link7a_connected=0;
|
||||
mod_number=4;
|
||||
|
||||
// setup 8 mechanical meters ////////////////////////////////////////////
|
||||
@ -1756,9 +1718,9 @@ static ADDRESS_MAP_START( mod2_memmap, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
|
||||
AM_RANGE(0x0850, 0x0850) AM_READWRITE(bankswitch_r,bankswitch_w) /* write bank (rom page select) */
|
||||
|
||||
/* AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w) */
|
||||
/* AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w) */ //Runs hoppers
|
||||
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("6840ptm", ptm6840_read, ptm6840_write) /* 6840PTM */
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("ptm_ic2", ptm6840_read, ptm6840_write)/* PTM6840 IC2 */
|
||||
|
||||
AM_RANGE(0x0a00, 0x0a03) AM_DEVREADWRITE("pia_ic3", pia6821_r, pia6821_w) /* PIA6821 IC3 */
|
||||
AM_RANGE(0x0b00, 0x0b03) AM_DEVREADWRITE("pia_ic4", pia6821_r, pia6821_w) /* PIA6821 IC4 */
|
||||
@ -1779,9 +1741,9 @@ static ADDRESS_MAP_START( mod4_yam_map, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
|
||||
AM_RANGE(0x0880, 0x0881) AM_DEVWRITE( "ym2413", ym2413_w )
|
||||
|
||||
// AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w)
|
||||
/* AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w) */ //Runs hoppers
|
||||
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("6840ptm", ptm6840_read, ptm6840_write) /* 6840PTM */
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("ptm_ic2", ptm6840_read, ptm6840_write)/* PTM6840 IC2 */
|
||||
|
||||
AM_RANGE(0x0a00, 0x0a03) AM_DEVREADWRITE("pia_ic3", pia6821_r, pia6821_w) /* PIA6821 IC3 */
|
||||
AM_RANGE(0x0b00, 0x0b03) AM_DEVREADWRITE("pia_ic4", pia6821_r, pia6821_w) /* PIA6821 IC4 */
|
||||
@ -1800,13 +1762,13 @@ static ADDRESS_MAP_START( mod4_oki_map, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
|
||||
AM_RANGE(0x0850, 0x0850) AM_WRITE(bankswitch_w) // write bank (rom page select)
|
||||
|
||||
AM_RANGE(0x0880, 0x0883) AM_DEVREADWRITE("pia_gamebd", pia6821_r,pia6821_w) // PIA6821 on game board
|
||||
AM_RANGE(0x0880, 0x0883) AM_DEVREADWRITE("pia_gamebd", pia6821_r,pia6821_w) // PIA6821 on sampled sound board
|
||||
|
||||
// AM_RANGE(0x08c0, 0x08c7) AM_DEVREADWRITE("??", ptm6840_read, ptm6840_write) // 6840PTM on game board
|
||||
// AM_RANGE(0x08c0, 0x08c7) AM_DEVREADWRITE("??", ptm6840_read, ptm6840_write) // 6840PTM on sampled sound board
|
||||
|
||||
// AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w)
|
||||
// AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w) //Runs hoppers
|
||||
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("6840ptm", ptm6840_read, ptm6840_write) /* 6840PTM */
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("ptm_ic2", ptm6840_read, ptm6840_write)/* PTM6840 IC2 */
|
||||
|
||||
AM_RANGE(0x0a00, 0x0a03) AM_DEVREADWRITE("pia_ic3", pia6821_r, pia6821_w) /* PIA6821 IC3 */
|
||||
AM_RANGE(0x0b00, 0x0b03) AM_DEVREADWRITE("pia_ic4", pia6821_r, pia6821_w) /* PIA6821 IC4 */
|
||||
@ -1831,9 +1793,9 @@ static ADDRESS_MAP_START( dutch_memmap, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
|
||||
// AM_RANGE(0x08c0, 0x08c7) AM_DEVREADWRITE("??", ptm6840_read, ptm6840_write) // 6840PTM on game board
|
||||
|
||||
// AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w)
|
||||
// AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w) //Runs hoppers
|
||||
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("6840ptm", ptm6840_read, ptm6840_write) /* 6840PTM */
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("ptm_ic2", ptm6840_read, ptm6840_write)/* PTM6840 IC2 */
|
||||
|
||||
AM_RANGE(0x0a00, 0x0a03) AM_DEVREADWRITE("pia_ic3", pia6821_r, pia6821_w) /* PIA6821 IC3 */
|
||||
AM_RANGE(0x0b00, 0x0b03) AM_DEVREADWRITE("pia_ic4", pia6821_r, pia6821_w) /* PIA6821 IC4 */
|
||||
@ -1867,7 +1829,7 @@ static MACHINE_CONFIG_START( mpu4mod2, driver_device )
|
||||
MCFG_TIMER_ADD_PERIODIC("50hz",gen_50hz, HZ(100))
|
||||
|
||||
/* 6840 PTM */
|
||||
MCFG_PTM6840_ADD("6840ptm", ptm_ic2_intf)
|
||||
MCFG_PTM6840_ADD("ptm_ic2", ptm_ic2_intf)
|
||||
|
||||
MCFG_PIA6821_ADD("pia_ic3", pia_ic3_intf)
|
||||
MCFG_PIA6821_ADD("pia_ic4", pia_ic4_intf)
|
||||
|
||||
@ -1,8 +1,5 @@
|
||||
/***********************************************************************************************************
|
||||
Barcrest MPU4 highly preliminary driver by J.Wallace, and Anonymous.
|
||||
|
||||
Any MAME-approved games should go here.
|
||||
|
||||
Barcrest MPU4 Extension driver by J.Wallace, and Anonymous.
|
||||
|
||||
--- Board Setup ---
|
||||
For the Barcrest MPU4 Video system, the GAME CARD (cartridge) contains the MPU4 video bios in the usual ROM
|
||||
@ -163,6 +160,10 @@ IRQ line connected to CPU
|
||||
-----------+---+-----------------+--------------------------------------------------------------------------
|
||||
C000-FFFF | R | D D D D D D D D | ROM
|
||||
-----------+---+-----------------+--------------------------------------------------------------------------
|
||||
Everything here is preliminary... the boards are quite fussy with regards their self tests
|
||||
and the timing may have to be perfect for them to function correctly. (as the comms are
|
||||
timer driven, the video is capable of various raster effects etc.)
|
||||
|
||||
TODO:
|
||||
- Correctly implement characteriser protection for each game.
|
||||
- Hook up trackball control for The Crystal Maze and The Mating Game - done, but game response is v. slow
|
||||
@ -1888,7 +1889,7 @@ static MACHINE_START( mpu4_vid )
|
||||
mpu4_config_common(machine);
|
||||
|
||||
/* setup communications */
|
||||
serial_card_connected = 1;
|
||||
link7a_connected = 1;
|
||||
|
||||
/* setup 8 mechanical meters */
|
||||
Mechmtr_init(8);
|
||||
@ -1946,8 +1947,8 @@ static ADDRESS_MAP_START( mpu4_6809_map, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
AM_RANGE(0x0000, 0x07ff) AM_RAM AM_SHARE("nvram")
|
||||
AM_RANGE(0x0800, 0x0800) AM_DEVREADWRITE("acia6850_0", acia6850_stat_r, acia6850_ctrl_w)
|
||||
AM_RANGE(0x0801, 0x0801) AM_DEVREADWRITE("acia6850_0", acia6850_data_r, acia6850_data_w)
|
||||
AM_RANGE(0x0880, 0x0881) AM_NOP /* Could be a UART datalogger is here. */
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("6840ptm", ptm6840_read, ptm6840_write)
|
||||
AM_RANGE(0x0880, 0x0881) AM_NOP //Read/write here
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("ptm_ic2", ptm6840_read, ptm6840_write)
|
||||
AM_RANGE(0x0a00, 0x0a03) AM_DEVREADWRITE("pia_ic3", pia6821_r, pia6821_w)
|
||||
AM_RANGE(0x0b00, 0x0b03) AM_DEVREADWRITE("pia_ic4", pia6821_r, pia6821_w)
|
||||
AM_RANGE(0x0c00, 0x0c03) AM_DEVREADWRITE("pia_ic5", pia6821_r, pia6821_w)
|
||||
@ -2113,9 +2114,9 @@ static ADDRESS_MAP_START( dealem_memmap, ADDRESS_SPACE_PROGRAM, 8 )
|
||||
AM_RANGE(0x0800, 0x0800) AM_DEVWRITE("crtc", mc6845_address_w)
|
||||
AM_RANGE(0x0801, 0x0801) AM_DEVREADWRITE("crtc", mc6845_register_r, mc6845_register_w)
|
||||
|
||||
/* AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w) */
|
||||
/* AM_RANGE(0x08e0, 0x08e7) AM_READWRITE(68681_duart_r,68681_duart_w) */ //Runs hoppers
|
||||
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("6840ptm", ptm6840_read, ptm6840_write) /* 6840PTM */
|
||||
AM_RANGE(0x0900, 0x0907) AM_DEVREADWRITE("ptm_ic2", ptm6840_read, ptm6840_write)/* PTM6840 IC2 */
|
||||
|
||||
AM_RANGE(0x0a00, 0x0a03) AM_DEVREADWRITE("pia_ic3", pia6821_r, pia6821_w) /* PIA6821 IC3 */
|
||||
AM_RANGE(0x0b00, 0x0b03) AM_DEVREADWRITE("pia_ic4", pia6821_r, pia6821_w) /* PIA6821 IC4 */
|
||||
@ -2239,7 +2240,7 @@ static MACHINE_CONFIG_START( mpu4_vid, driver_device )
|
||||
MCFG_NVRAM_ADD_0FILL("nvram") /* confirm */
|
||||
|
||||
/* 6840 PTM */
|
||||
MCFG_PTM6840_ADD("6840ptm", ptm_ic2_intf)
|
||||
MCFG_PTM6840_ADD("ptm_ic2", ptm_ic2_intf)
|
||||
|
||||
MCFG_PIA6821_ADD("pia_ic3", pia_ic3_intf)
|
||||
MCFG_PIA6821_ADD("pia_ic4", pia_ic4_intf)
|
||||
@ -2313,7 +2314,7 @@ static MACHINE_CONFIG_START( dealem, driver_device )
|
||||
|
||||
MCFG_TIMER_ADD_PERIODIC("50hz",gen_50hz, HZ(100))
|
||||
|
||||
MCFG_PTM6840_ADD("6840ptm", ptm_ic2_intf)
|
||||
MCFG_PTM6840_ADD("ptm_ic2", ptm_ic2_intf)
|
||||
|
||||
MCFG_PIA6821_ADD("pia_ic3", pia_ic3_intf)
|
||||
MCFG_PIA6821_ADD("pia_ic4", pia_ic4_intf)
|
||||
@ -3155,7 +3156,7 @@ GAME( 1993, crmazed, crmaze, crmaze, crmaze, crmaze, ROT0, "Barcrest"
|
||||
GAME( 1993, crmazea, crmaze, crmaze, crmaze, crmazea, ROT0, "Barcrest", "The Crystal Maze (v0.1, AMLD)", GAME_NOT_WORKING )//SWP 0.9
|
||||
|
||||
GAME( 1993, crmaze2, bctvidbs, crmaze, crmaze, crmaze2, ROT0, "Barcrest", "The New Crystal Maze Featuring Ocean Zone (v2.2)", GAME_NOT_WORKING )//SWP 1.0
|
||||
GAME( 1993, crmaze2d, crmaze2, crmaze, crmaze, crmaze2, ROT0, "Barcrest", "The New Crystal Maze Featuring Ocean Zone (v2.2d)", GAME_NOT_WORKING )//SWP 1.0D
|
||||
GAME( 1993, crmaze2d, crmaze2, crmaze, crmaze, crmaze2, ROT0, "Barcrest", "The New Crystal Maze Featuring Ocean Zone (v2.2, Datapak)", GAME_NOT_WORKING )//SWP 1.0D
|
||||
GAME( 1993, crmaze2a, crmaze2, crmaze, crmaze, 0, ROT0, "Barcrest", "The New Crystal Maze Featuring Ocean Zone (v0.1, AMLD)", GAME_NOT_WORKING )//SWP 1.0 /* unprotected? bootleg? */
|
||||
|
||||
GAME( 1994, crmaze3, bctvidbs, crmaze, crmaze, crmaze3, ROT0, "Barcrest", "The Crystal Maze Team Challenge (v0.9)", GAME_NOT_WORKING )//SWP 0.7
|
||||
|
||||
@ -313,7 +313,7 @@
|
||||
<backdrop name="lamp16" element="bluepiece" state="0">
|
||||
<bounds x="0" y="14" width="7" height="7"/>
|
||||
</backdrop>
|
||||
<backdrop name="lamp17" element="redpiece" state="0">
|
||||
<backdrop name="lamp17" element="bluepiece" state="0">
|
||||
<bounds x="8" y="14" width="7" height="7"/>
|
||||
</backdrop>
|
||||
<backdrop name="lamp18" element="bluepiece" state="0">
|
||||
|
||||
Loading…
Reference in New Issue
Block a user