Sprinter/mame
2
0
Fork 0
mirror of https://github.com/holub/mame synced 2025-07-04 01:18:59 +03:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

ay8910.cpp: Document device names (nw)

Browse Source
This commit is contained in:
AJR 2017-06-15 10:30:03 -04:00
parent adab8a2a69
commit a61d1ba698
1 changed files with 20 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
src/devices/sound/ay8910.cpp
View File

@ -380,7 +380,7 @@ AY-3-8913:
[4] This is claimed to be equivalent to TEST 2 on the datasheet
AY-3-8910/A: 2 I/O ports
GI AY-3-8910/A Programmable Sound Generator (PSG): 2 I/O ports
A7 thru A4 enable state for selecting a register can be changed with a
factory mask adjustment but default was 0000 for the "common" part shipped
(probably die "-100").
@ -392,7 +392,7 @@ AY-3-8910/A: 2 I/O ports
AY-3-8910 die is labeled "90-32033" with a 1979 copyright and a "-100" die
code.
AY-3-8910A die is labeled "90-32128" with a 1983 copyright.
AY-3-8912/A: 1 I/O port
GI AY-3-8912/A: 1 I/O port
/A9 pin doesn't exist and is considered pulled low.
TEST2 pin doesn't exist and is considered pulled high.
IOB pins do not exist and have unknown behavior if driven high/low and read
@ -411,7 +411,7 @@ AY-3-8913: 0 I/O ports
factory mask adjustment but default was 0000 for the "common" part shipped
AY-3-8913: Unused bits in registers have unknown behavior.
AY-3-8913 die is unknown.
AY-3-8914/A: 2 I/O ports
GI AY-3-8914/A: 2 I/O ports
A7 thru A4 enable state for selecting a register can be changed with a
factory mask adjustment but was 0000 for the part shipped with the
Intellivision.
@ -430,7 +430,7 @@ AY-3-8914/A: 2 I/O ports
I/O current source/sink behavior is unknown.
AY-3-8914 die is labeled "90-32022" with a 1978 copyright.
AY-3-8914A die is unknown.
AY-3-8916: 2 I/O ports
GI AY-3-8916: 2 I/O ports
A7 thru A4 enable state for selecting a register can be changed with a
factory mask adjustment; its mask is unknown. This chip was shipped
with certain later Intellivision II systems.
@ -440,7 +440,7 @@ AY-3-8916: 2 I/O ports
AY-3-8916: Unused bits in registers have unknown behavior.
I/O current source/sink behavior is unknown.
AY-3-8916 die is unknown.
AY-3-8917: 2 I/O ports
GI AY-3-8917: 2 I/O ports
A7 thru A4 enable state for selecting a register can be changed with a
factory mask adjustment but was 1111 for the part shipped with the
Intellivision ECS module.
@ -450,7 +450,7 @@ AY-3-8917: 2 I/O ports
AY-3-8917: Unused bits in registers have unknown behavior.
I/O current source/sink behavior is unknown.
AY-3-8917 die is unknown.
AY8930: 2 I/O ports
Microchip AY8930 Enhanced Programmable Sound Generator (EPSG): 2 I/O ports
BC2 pin exists but is always considered pulled high. The pin might have no
bond wire at all.
Pins 2 and 5 might be additional test pins rather than being NC.
@ -471,7 +471,7 @@ AY8930: 2 I/O ports
explicitly states that unused bits always read as 0.
I/O current source/sink behavior is unknown.
AY8930 die is unknown.
YM2149: 2 I/O ports
Yamaha YM2149 Software-Controlled Sound Generator (SSG): 2 I/O ports
A7 thru A4 enable state for selecting a register are 0000 for all? parts
shipped.
Pins 24 and 25 are /A9, A8 which are an active low and high chip enable.
@ -483,7 +483,7 @@ YM2149: 2 I/O ports
I/O current source/sink behavior is unknown.
YM2149 die is unknown; only one die revision, 'G', has been observed
from Yamaha chip/datecode silkscreen surface markings.
YM2203: 2 I/O ports
Yamaha YM2203: 2 I/O ports
The pinout of this chip is completely different from the AY-3-8910.
The entire way this chip is accessed is completely different from the usual
AY-3-8910 selection of chips, so there is a /CS and a /RD and a /WR and
@ -498,13 +498,13 @@ YM2203: 2 I/O ports
from Yamaha chip/datecode silkscreen surface markings. It is unknown
what behavioral differences exist between these two revisions.
The 'F' revision only appears during the first year of production.
YM3439: limited info: CMOS version of YM2149?
YMZ284: limited info: 0 I/O port, different clock divider
Yamaha YM3439: limited info: CMOS version of YM2149?
Yamaha YMZ284: limited info: 0 I/O port, different clock divider
The chip selection logic is again simplified here: pin 1 is /WR, pin 2 is
/CS and pin 3 is A0.
D0-D7 are conveniently all on one side of the 16-pin package.
Pin 8 is /IC (initial clear), with an internal pullup.
YMZ294: limited info: 0 I/O port
Yamaha YMZ294: limited info: 0 I/O port
Pinout is identical to YMZ284 except for two additions: pin 8 selects
between 4MHz (H) and 6MHz (L), while pin 10 is /TEST.
OKI M5255, Winbond WF19054, JFC 95101, File KC89C72, Toshiba T7766A : differences to be listed
@ -1466,7 +1466,7 @@ WRITE8_MEMBER( ay8914_device::write )
DEFINE_DEVICE_TYPE(AY8910, ay8910_device, "ay8910", "AY-3-8910A")
DEFINE_DEVICE_TYPE(AY8910, ay8910_device, "ay8910", "AY-3-8910A PSG")
ay8910_device::ay8910_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8910, tag, owner, clock, PSG_TYPE_AY, 3, 2)
@ -1539,7 +1539,7 @@ void ay8910_device::set_type(psg_type_t psg_type)
}
}
DEFINE_DEVICE_TYPE(AY8912, ay8912_device, "ay8912", "AY-3-8912A")
DEFINE_DEVICE_TYPE(AY8912, ay8912_device, "ay8912", "AY-3-8912A PSG")
ay8912_device::ay8912_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8912, tag, owner, clock, PSG_TYPE_AY, 3, 1)
@ -1547,7 +1547,7 @@ ay8912_device::ay8912_device(const machine_config &mconfig, const char *tag, dev
}
DEFINE_DEVICE_TYPE(AY8913, ay8913_device, "ay8913", "AY-3-8913A")
DEFINE_DEVICE_TYPE(AY8913, ay8913_device, "ay8913", "AY-3-8913 PSG")
ay8913_device::ay8913_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8913, tag, owner, clock, PSG_TYPE_AY, 3, 0)
@ -1555,7 +1555,7 @@ ay8913_device::ay8913_device(const machine_config &mconfig, const char *tag, dev
}
DEFINE_DEVICE_TYPE(AY8914, ay8914_device, "ay8914", "AY-3-8914A")
DEFINE_DEVICE_TYPE(AY8914, ay8914_device, "ay8914", "AY-3-8914A PSG")
ay8914_device::ay8914_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8914, tag, owner, clock, PSG_TYPE_AY, 3, 2)
@ -1563,7 +1563,7 @@ ay8914_device::ay8914_device(const machine_config &mconfig, const char *tag, dev
}
DEFINE_DEVICE_TYPE(AY8930, ay8930_device, "ay8930", "AY-3-8930A")
DEFINE_DEVICE_TYPE(AY8930, ay8930_device, "ay8930", "AY8930 EPSG")
ay8930_device::ay8930_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8930, tag, owner, clock, PSG_TYPE_AY, 3, 2)
@ -1571,7 +1571,7 @@ ay8930_device::ay8930_device(const machine_config &mconfig, const char *tag, dev
}
DEFINE_DEVICE_TYPE(YM2149, ym2149_device, "ym2149", "YM2149")
DEFINE_DEVICE_TYPE(YM2149, ym2149_device, "ym2149", "YM2149 SSG")
ym2149_device::ym2149_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YM2149, tag, owner, clock, PSG_TYPE_YM, 3, 2)
@ -1579,7 +1579,7 @@ ym2149_device::ym2149_device(const machine_config &mconfig, const char *tag, dev
}
DEFINE_DEVICE_TYPE(YM3439, ym3439_device, "ym3439", "YM3439")
DEFINE_DEVICE_TYPE(YM3439, ym3439_device, "ym3439", "YM3439 SSGC")
ym3439_device::ym3439_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YM3439, tag, owner, clock, PSG_TYPE_YM, 3, 2)
@ -1587,7 +1587,7 @@ ym3439_device::ym3439_device(const machine_config &mconfig, const char *tag, dev
}
DEFINE_DEVICE_TYPE(YMZ284, ymz284_device, "ymz284", "YMZ284")
DEFINE_DEVICE_TYPE(YMZ284, ymz284_device, "ymz284", "YMZ284 SSGL")
ymz284_device::ymz284_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YMZ284, tag, owner, clock, PSG_TYPE_YM, 1, 0)
@ -1595,7 +1595,7 @@ ymz284_device::ymz284_device(const machine_config &mconfig, const char *tag, dev
}
DEFINE_DEVICE_TYPE(YMZ294, ymz294_device, "ymz294", "YMZ294")
DEFINE_DEVICE_TYPE(YMZ294, ymz294_device, "ymz294", "YMZ294 SSGLP")
ymz294_device::ymz294_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YMZ294, tag, owner, clock, PSG_TYPE_YM, 1, 0)