fidelz80: added VSC foreign language sets

src/mame/drivers/fidelz80.cpp

@@ -598,7 +598,7 @@ PB.3 - violet wire
 PB.4 - white wire (and TSI BUSY line)
 PB.5 - selection jumper input (see below)
 PB.6 - TSI start line
-PB.7 - TSI ROM D0 line
+PB.7 - TSI ROM A12 line
 
 
 selection jumpers:
@@ -1070,7 +1070,7 @@ WRITE8_MEMBER(fidelz80_state::vsc_ppi_portc_w)
 {
 	// d0-d3: select digits
 	// d0-d7: select leds, input mux low bits
-	m_inp_mux = (m_inp_mux & 0x300) | data;
+	m_inp_mux = (m_inp_mux & ~0xff) | data;
 	m_led_select = data;
 	vsc_prepare_display();
 }
@@ -1081,7 +1081,8 @@ WRITE8_MEMBER(fidelz80_state::vsc_ppi_portc_w)
 READ8_MEMBER(fidelz80_state::vsc_pio_porta_r)
 {
 	// d0-d7: multiplexed inputs
-	return read_inputs(10);
+	return read_inputs(11);
+	
 }
 
 READ8_MEMBER(fidelz80_state::vsc_pio_portb_r)
@@ -1090,18 +1091,26 @@ READ8_MEMBER(fidelz80_state::vsc_pio_portb_r)
 
 	// d4: TSI BUSY line
 	ret |= (m_speech->busy_r()) ? 0 : 0x10;
-
+	
 	return ret;
 }
 
 WRITE8_MEMBER(fidelz80_state::vsc_pio_portb_w)
 {
 	// d0,d1: input mux highest bits
-	m_inp_mux = (m_inp_mux & 0xff) | (data << 8 & 0x300);
+	// d5: enable language switch
-
+	m_inp_mux = (m_inp_mux & ~0x700) | (data << 8 & 0x300) | (data << 5 & 0x400);
+	
+	//if (m_inp_mux & 0x400) debugger_break(machine());
+	
+	// d7: TSI ROM A12
+	
+	m_speech->force_update(); // update stream to now
+	m_speech_bank = data >> 7 & 1;
+	
 	// d6: TSI START line
 	m_speech->start_w(data >> 6 & 1);
-
+	
 	// d2: lower TSI volume
 	m_speech->set_output_gain(0, (data & 4) ? 0.5 : 1.0);
 }
@@ -1298,26 +1307,26 @@ static INPUT_PORTS_START( cc10 )
 	PORT_START("IN.4")
 	PORT_BIT(0x0f, IP_ACTIVE_HIGH, IPT_UNUSED)
 
-	PORT_START("LEVEL") // factory setting
+	PORT_START("LEVEL") // hardwired (VCC/GND?)
-	PORT_CONFNAME( 0x80, 0x00, "PPI.B.7: Maximum Levels" )
+	PORT_CONFNAME( 0x80, 0x00, "Maximum Levels" )
-	PORT_CONFSETTING( 0x00, "10" )
+	PORT_CONFSETTING( 0x00, "10" ) // factory setting
 	PORT_CONFSETTING( 0x80, "3" )
 INPUT_PORTS_END
 
 static INPUT_PORTS_START( vcc )
 	PORT_INCLUDE( vcc_base )
 
-	PORT_START("IN.4") // not consumer accessible
+	PORT_START("IN.4") // PCB jumpers, not consumer accessible
-	PORT_CONFNAME( 0x01, 0x00, "PCB Jumper: French" )
+	PORT_CONFNAME( 0x01, 0x00, "Language: French" )
 	PORT_CONFSETTING(    0x00, DEF_STR( Off ) )
 	PORT_CONFSETTING(    0x01, DEF_STR( On ) )
-	PORT_CONFNAME( 0x02, 0x00, "PCB Jumper: Spanish" )
+	PORT_CONFNAME( 0x02, 0x00, "Language: Spanish" )
 	PORT_CONFSETTING(    0x00, DEF_STR( Off ) )
 	PORT_CONFSETTING(    0x02, DEF_STR( On ) )
-	PORT_CONFNAME( 0x04, 0x00, "PCB Jumper: German" )
+	PORT_CONFNAME( 0x04, 0x00, "Language: German" )
 	PORT_CONFSETTING(    0x00, DEF_STR( Off ) )
 	PORT_CONFSETTING(    0x04, DEF_STR( On ) )
-	PORT_CONFNAME( 0x08, 0x00, "PCB Jumper: Special" )
+	PORT_CONFNAME( 0x08, 0x00, "Language: Special" )
 	PORT_CONFSETTING(    0x00, DEF_STR( Off ) )
 	PORT_CONFSETTING(    0x08, DEF_STR( On ) )
 INPUT_PORTS_END
@@ -1326,7 +1335,7 @@ static INPUT_PORTS_START( vccfr )
 	PORT_INCLUDE( vcc )
 
 	PORT_MODIFY("IN.4")
-	PORT_CONFNAME( 0x01, 0x01, "PCB Jumper: French" )
+	PORT_CONFNAME( 0x01, 0x01, "Language: French" )
 	PORT_CONFSETTING(    0x00, DEF_STR( Off ) )
 	PORT_CONFSETTING(    0x01, DEF_STR( On ) )
 INPUT_PORTS_END
@@ -1335,7 +1344,7 @@ static INPUT_PORTS_START( vccsp )
 	PORT_INCLUDE( vcc )
 
 	PORT_MODIFY("IN.4")
-	PORT_CONFNAME( 0x02, 0x02, "PCB Jumper: Spanish" )
+	PORT_CONFNAME( 0x02, 0x02, "Language: Spanish" )
 	PORT_CONFSETTING(    0x00, DEF_STR( Off ) )
 	PORT_CONFSETTING(    0x02, DEF_STR( On ) )
 INPUT_PORTS_END
@@ -1344,7 +1353,7 @@ static INPUT_PORTS_START( vccg )
 	PORT_INCLUDE( vcc )
 
 	PORT_MODIFY("IN.4")
-	PORT_CONFNAME( 0x04, 0x04, "PCB Jumper: German" )
+	PORT_CONFNAME( 0x04, 0x04, "Language: German" )
 	PORT_CONFSETTING(    0x00, DEF_STR( Off ) )
 	PORT_CONFSETTING(    0x04, DEF_STR( On ) )
 INPUT_PORTS_END
@@ -1449,6 +1458,13 @@ static INPUT_PORTS_START( vsc )
 	PORT_BIT(0x10, IP_ACTIVE_HIGH, IPT_KEYPAD) PORT_NAME("DM") PORT_CODE(KEYCODE_M)
 	PORT_BIT(0x20, IP_ACTIVE_HIGH, IPT_KEYPAD) PORT_NAME("ST") PORT_CODE(KEYCODE_S)
 	PORT_BIT(0xc0, IP_ACTIVE_HIGH, IPT_UNUSED)
+
+	PORT_START("IN.10") // hardwired (2 diodes)
+	PORT_CONFNAME( 0x03, 0x00, "Language" )
+	PORT_CONFSETTING( 0x00, "English" )
+	PORT_CONFSETTING( 0x01, "1" ) // todo: game dasm says it checks against 0/not0, 2, 3.. which language is which?
+	PORT_CONFSETTING( 0x02, "2" )
+	PORT_CONFSETTING( 0x03, "3" )
 INPUT_PORTS_END
 
 static INPUT_PORTS_START( vbrc )
@@ -1582,6 +1598,7 @@ static MACHINE_CONFIG_START( vsc, fidelz80_state )
 	/* sound hardware */
 	MCFG_SPEAKER_STANDARD_MONO("mono")
 	MCFG_SOUND_ADD("speech", S14001A, 25000) // R/C circuit, around 25khz
+	MCFG_S14001A_EXT_READ_HANDLER(READ8(fidelz80_state, vcc_speech_r))
 	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.75)
 MACHINE_CONFIG_END
 
@@ -1705,8 +1722,39 @@ ROM_START( vsc )
 	ROM_LOAD("101-64109.bin", 0x2000, 0x2000, CRC(08a3577c) SHA1(69fe379d21a9d4b57c84c3832d7b3e7431eec341) )
 	ROM_LOAD("101-32024.bin", 0x4000, 0x1000, CRC(2a078676) SHA1(db2f0aba7e8ac0f84a17bae7155210cdf0813afb) )
 
-	ROM_REGION( 0x1000, "speech", 0 )
+	ROM_REGION( 0x2000, "speech", 0 )
 	ROM_LOAD("101-32107.bin", 0x0000, 0x1000, CRC(f35784f9) SHA1(348e54a7fa1e8091f89ac656b4da22f28ca2e44d) )
+	ROM_RELOAD(               0x1000, 0x1000)
+ROM_END
+
+ROM_START( vscsp )
+	ROM_REGION( 0x10000, "maincpu", 0 )
+	ROM_LOAD("101-64108.bin", 0x0000, 0x2000, CRC(c9c98490) SHA1(e6db883df088d60463e75db51433a4b01a3e7626) )
+	ROM_LOAD("101-64109.bin", 0x2000, 0x2000, CRC(08a3577c) SHA1(69fe379d21a9d4b57c84c3832d7b3e7431eec341) )
+	ROM_LOAD("101-32024.bin", 0x4000, 0x1000, CRC(2a078676) SHA1(db2f0aba7e8ac0f84a17bae7155210cdf0813afb) )
+
+	ROM_REGION( 0x2000, "speech", 0 )
+	ROM_LOAD("vcc-spanish.bin", 0x0000, 0x2000, BAD_DUMP CRC(8766e128) SHA1(78c7413bf240159720b131ab70bfbdf4e86eb1e9) ) // taken from vcc/fexcelv, assume correct
+ROM_END
+
+ROM_START( vscg )
+	ROM_REGION( 0x10000, "maincpu", 0 )
+	ROM_LOAD("101-64108.bin", 0x0000, 0x2000, CRC(c9c98490) SHA1(e6db883df088d60463e75db51433a4b01a3e7626) )
+	ROM_LOAD("101-64109.bin", 0x2000, 0x2000, CRC(08a3577c) SHA1(69fe379d21a9d4b57c84c3832d7b3e7431eec341) )
+	ROM_LOAD("101-32024.bin", 0x4000, 0x1000, CRC(2a078676) SHA1(db2f0aba7e8ac0f84a17bae7155210cdf0813afb) )
+
+	ROM_REGION( 0x2000, "speech", 0 )
+	ROM_LOAD("vcc-german.bin", 0x0000, 0x2000, BAD_DUMP CRC(6c85e310) SHA1(20d1d6543c1e6a1f04184a2df2a468f33faec3ff) ) // taken from fexcelv, assume correct
+ROM_END
+
+ROM_START( vscfr )
+	ROM_REGION( 0x10000, "maincpu", 0 )
+	ROM_LOAD("101-64108.bin", 0x0000, 0x2000, CRC(c9c98490) SHA1(e6db883df088d60463e75db51433a4b01a3e7626) )
+	ROM_LOAD("101-64109.bin", 0x2000, 0x2000, CRC(08a3577c) SHA1(69fe379d21a9d4b57c84c3832d7b3e7431eec341) )
+	ROM_LOAD("101-32024.bin", 0x4000, 0x1000, CRC(2a078676) SHA1(db2f0aba7e8ac0f84a17bae7155210cdf0813afb) )
+
+	ROM_REGION( 0x2000, "speech", 0 )
+	ROM_LOAD("vcc-french.bin", 0x0000, 0x2000, BAD_DUMP CRC(fe8c5c18) SHA1(2b64279ab3747ee81c86963c13e78321c6cfa3a3) ) // taken from fexcelv, assume correct
 ROM_END
 
 
@@ -1757,7 +1805,10 @@ COMP( 1980, uvcsp,    vcc,    0,      vcc,     vccsp,  driver_device, 0, "Fideli
 COMP( 1980, uvcg,     vcc,    0,      vcc,     vccg,   driver_device, 0, "Fidelity Electronics", "Advanced Voice Chess Challenger (German)", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING )
 COMP( 1980, uvcfr,    vcc,    0,      vcc,     vccfr,  driver_device, 0, "Fidelity Electronics", "Advanced Voice Chess Challenger (French)", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING )
 
-COMP( 1980, vsc,      0,      0,      vsc,     vsc,    driver_device, 0, "Fidelity Electronics", "Voice Sensory Chess Challenger", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING | MACHINE_CLICKABLE_ARTWORK )
+COMP( 1980, vsc,      0,      0,      vsc,     vsc,    driver_device, 0, "Fidelity Electronics", "Voice Sensory Chess Challenger (English)", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING | MACHINE_CLICKABLE_ARTWORK )
+COMP( 1980, vscsp,    vsc,    0,      vsc,     vsc,    driver_device, 0, "Fidelity Electronics", "Voice Sensory Chess Challenger (Spanish)", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING | MACHINE_CLICKABLE_ARTWORK )
+COMP( 1980, vscg,     vsc,    0,      vsc,     vsc,    driver_device, 0, "Fidelity Electronics", "Voice Sensory Chess Challenger (German)", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING | MACHINE_CLICKABLE_ARTWORK )
+COMP( 1980, vscfr,    vsc,    0,      vsc,     vsc,    driver_device, 0, "Fidelity Electronics", "Voice Sensory Chess Challenger (French)", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING | MACHINE_CLICKABLE_ARTWORK )
 
 COMP( 1979, vbrc,     0,      0,      vbrc,    vbrc,   driver_device, 0, "Fidelity Electronics", "Voice Bridge Challenger", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING )
 COMP( 1980, bridgec3, vbrc,   0,      vbrc,    vbrc,   driver_device, 0, "Fidelity Electronics", "Voice Bridge Challenger III", MACHINE_SUPPORTS_SAVE | MACHINE_NOT_WORKING )

src/mame/includes/fidelz80.h

@@ -25,7 +25,7 @@ public:
 
 	// devices/pointers
 	required_device<cpu_device> m_maincpu;
-	optional_ioport_array<10> m_inp_matrix; // max 10
+	optional_ioport_array<11> m_inp_matrix; // max 11
 	optional_device<s14001a_device> m_speech;
 	optional_region_ptr<UINT8> m_speech_rom;
 

src/mame/mess.lst

@@ -2153,6 +2153,9 @@ uvcsp
 bridgec3
 vbrc
 vsc
+vscg
+vscfr
+vscsp
 csc
 fscc12
 fexcelv