z80pio: change an if/else block to switch/case,

dl1416: don't randomize ram at power on

src/devices/machine/z80pio.cpp

@@ -559,10 +559,24 @@ void z80pio_device::pio_port::write(uint8_t data)
 
 		data &= mask;
 
-		if ((m_icw & 0x60) == 0 && data != mask) match = true;
-		else if ((m_icw & 0x60) == 0x20 && data != 0) match = true;
-		else if ((m_icw & 0x60) == 0x40 && data == 0) match = true;
-		else if ((m_icw & 0x60) == 0x60 && data == mask) match = true;
+		switch (m_icw & 0x60)
+		{
+		case 0x00:
+			match = data != mask;
+			break;
+
+		case 0x20:
+			match = data != 0;
+			break;
+
+		case 0x40:
+			match = data == 0;
+			break;
+
+		case 0x60:
+			match = data == mask;
+			break;
+		}
 
 		if (!m_match && match && !m_ius)
 		{

src/devices/machine/z80pio.h

@@ -58,6 +58,7 @@ public:
 	// construction/destruction
 	z80pio_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock);
 
+	// configuration helpers
 	auto out_int_callback() { return m_out_int_cb.bind(); }
 	auto in_pa_callback() { return m_in_pa_cb.bind(); }
 	auto out_pa_callback() { return m_out_pa_cb.bind(); }
@@ -66,7 +67,6 @@ public:
 	auto out_pb_callback() { return m_out_pb_cb.bind(); }
 	auto out_brdy_callback() { return m_out_brdy_cb.bind(); }
 
-
 	// I/O line access
 	int rdy(int which) { return m_port[which].rdy(); }
 	void strobe(int which, bool state) { m_port[which].strobe(state); }
@@ -196,9 +196,9 @@ private:
 
 		int m_mode;                 // mode register
 		int m_next_control_word;    // next control word
-		uint8_t m_input;              // input latch
-		uint8_t m_output;             // output latch
-		uint8_t m_ior;                // input/output register
+		uint8_t m_input;            // input latch
+		uint8_t m_output;           // output latch
+		uint8_t m_ior;              // input/output register
 		bool m_rdy;                 // ready
 		bool m_stb;                 // strobe
 
@@ -206,14 +206,14 @@ private:
 		bool m_ie;                  // interrupt enabled
 		bool m_ip;                  // interrupt pending
 		bool m_ius;                 // interrupt under service
-		uint8_t m_icw;                // interrupt control word
-		uint8_t m_vector;             // interrupt vector
-		uint8_t m_mask;               // interrupt mask
+		uint8_t m_icw;              // interrupt control word
+		uint8_t m_vector;           // interrupt vector
+		uint8_t m_mask;             // interrupt mask
 		bool m_match;               // logic equation match
 	};
 
 	// internal state
-	pio_port             m_port[2];
+	pio_port            m_port[2];
 	devcb_write_line    m_out_int_cb;
 
 	devcb_read8         m_in_pa_cb;

src/devices/video/dl1416.cpp

@@ -225,15 +225,6 @@ void dl1414_device::device_start()
 	m_wr_in = true;
 	m_addr_in = 0x00;
 	m_data_in = 0x00;
-
-	// randomise internal RAM
-	for (unsigned i = 0; 4 > i; ++i)
-	{
-		m_digit_ram[i] = machine().rand() & 0x3f;
-		// TODO: only enable the following line if the device actually has a cursor (DL1416T and DL1416B), if DL1414 then cursor is always 0!
-		//m_cursor_state[i] = bool(BIT(device->machine().rand(), 7));
-		m_cursor_state[i] = false;
-	}
 }
 
 void dl1416_device::device_start()
@@ -261,7 +252,7 @@ void dl1414_device::device_reset()
 {
 	// push initial display state
 	for (unsigned i = 0; 4 > i; ++i)
-		m_update_cb(i, translate(m_digit_ram[i], m_cursor_state[i]), 0xffff);
+		do_update(i);
 }
 
 
@@ -325,7 +316,7 @@ void dl1414_device::bus_w(offs_t offset, u8 data)
 	if (m_digit_ram[offset] != data)
 	{
 		m_digit_ram[offset] = data;
-		m_update_cb(offset, translate(m_digit_ram[offset], m_cursor_state[offset]), 0xffff);
+		do_update(offset);
 	}
 }
 
@@ -336,6 +327,11 @@ void dl1414_device::set_cursor_state(offs_t offset, bool state)
 	if (state != m_cursor_state[offset])
 	{
 		m_cursor_state[offset] = state;
-		m_update_cb(offset, translate(m_digit_ram[offset], m_cursor_state[offset]), 0xffff);
+		do_update(offset);
 	}
 }
+
+void dl1414_device::do_update(offs_t offset)
+{
+	m_update_cb(offset, translate(m_digit_ram[offset], m_cursor_state[offset]), 0xffff);
+}

src/devices/video/dl1416.h

@@ -66,6 +66,8 @@ protected:
 private:
 	devcb_write16 m_update_cb;
 
+	void do_update(offs_t offset);
+
 	// internal state
 	u8 m_digit_ram[4]; // holds the digit code for each position
 	bool m_cursor_state[4]; // holds the cursor state for each position

src/mame/handheld/lk3000.cpp

@@ -9,7 +9,7 @@ It was also licensed to Nixdorf.
 Hardware notes:
 - 3870 MCU (Motorola brand) @ 4MHz(2MHz internal)
 - optional external ROM or RAM
-- 4*Litronix DL 1414 (16*17segs total)
+- 4*Litronix DL1414 (16*17segs total)
 - 33-button keypad
 
 The CPU and memory is on the cartridge. In theory, any hardware configuration