mirror of
https://github.com/holub/mame
synced 2025-06-05 12:26:35 +03:00
New Not Working machine
- Nutting Icebox
This commit is contained in:
Robbbert
parent
ecb741bc96
commit
d0af23f74d
@ -3690,6 +3690,7 @@ files {
|
||||
MAME_DIR .. "src/mame/drivers/i7000.cpp",
|
||||
MAME_DIR .. "src/mame/drivers/ibm3153.cpp",
|
||||
MAME_DIR .. "src/mame/drivers/icatel.cpp",
|
||||
MAME_DIR .. "src/mame/drivers/icebox.cpp",
|
||||
MAME_DIR .. "src/mame/drivers/if800.cpp",
|
||||
MAME_DIR .. "src/mame/drivers/imsai.cpp",
|
||||
MAME_DIR .. "src/mame/drivers/indiana.cpp",
|
||||
|
||||
199
src/mame/drivers/icebox.cpp
Normal file
199
src/mame/drivers/icebox.cpp
Normal file
@ -0,0 +1,199 @@
|
||||
// license:BSD-3-Clause
|
||||
// copyright-holders:Robbbert
|
||||
/******************************************************************************************************************
|
||||
|
||||
Nutting Icebox
|
||||
|
||||
2018-08-19 Skeleton driver. It's all guesswork.
|
||||
|
||||
It's a case with many slots for daughter boards, and 2 floppy drives. It appears to be an "in-circuit emulator"
|
||||
for an unknown arcade board.
|
||||
|
||||
The unit has 5 boards: 3 boards were photographed and are: a cpu board (Z80 and unmarked XTAL),
|
||||
a RS232 board (2x 8251, 8 dipswitches connected to a BR1941L, 4.9152 XTAL),
|
||||
and a board covered with TTL.
|
||||
|
||||
Commands:
|
||||
- At the main % prompt:
|
||||
-- A = Arcade
|
||||
-- C = Commercial
|
||||
-- D = Debug
|
||||
-- ^C = load data to 0 and jump there (disk boot?)
|
||||
-- ^T = load data from disk?
|
||||
-- ^X = new line
|
||||
- At the debug prompt: (to be done) Q to quit
|
||||
|
||||
Status:
|
||||
- Machine boots up, you can enter commands.
|
||||
|
||||
To Do:
|
||||
- Find out what ports E4-FF do.
|
||||
- Hook up the floppy drives when the ports are identified.
|
||||
|
||||
The floppy drives are a special type containing a FDC within. The FDC is a FD1771-B01 with a 4MHz XTAL.
|
||||
I suspect the drive issues a NMI when the internal DRQ asserts (code around F21C). Need to resolve how
|
||||
it handles writing data to 0000-up while keeping the NMI handler.
|
||||
|
||||
******************************************************************************************************************/
|
||||
|
||||
#include "emu.h"
|
||||
#include "cpu/z80/z80.h"
|
||||
#include "machine/i8251.h"
|
||||
#include "machine/com8116.h"
|
||||
#include "bus/rs232/rs232.h"
|
||||
//#include "machine/wd_fdc.h"
|
||||
#include "screen.h"
|
||||
|
||||
|
||||
class icebox_state : public driver_device
|
||||
{
|
||||
public:
|
||||
icebox_state(const machine_config &mconfig, device_type type, const char *tag)
|
||||
: driver_device(mconfig, type, tag)
|
||||
, m_maincpu(*this, "maincpu")
|
||||
, m_uart0(*this, "uart0")
|
||||
, m_uart1(*this, "uart1")
|
||||
, m_brg(*this, "brg")
|
||||
{ }
|
||||
|
||||
void icebox(machine_config &config);
|
||||
|
||||
private:
|
||||
void mem_map(address_map &map);
|
||||
void io_map(address_map &map);
|
||||
void machine_reset() override;
|
||||
|
||||
required_device<cpu_device> m_maincpu;
|
||||
required_device<i8251_device> m_uart0;
|
||||
required_device<i8251_device> m_uart1;
|
||||
required_device<com8116_device> m_brg;
|
||||
};
|
||||
|
||||
|
||||
void icebox_state::mem_map(address_map &map)
|
||||
{
|
||||
map(0x0000, 0x00ff).rom().region("maincpu", 0); // required for NMI handler and for initial boot
|
||||
map(0xf000, 0xfbff).rom().region("maincpu", 0);
|
||||
map(0xfc00, 0xffff).ram();
|
||||
}
|
||||
|
||||
void icebox_state::io_map(address_map &map)
|
||||
{
|
||||
map.global_mask(0xff);
|
||||
map.unmap_value_high();
|
||||
map(0xe0, 0xe0).rw("uart0", FUNC(i8251_device::data_r), FUNC(i8251_device::data_w));
|
||||
map(0xe1, 0xe1).rw("uart0", FUNC(i8251_device::status_r), FUNC(i8251_device::control_w));
|
||||
map(0xe2, 0xe2).rw("uart1", FUNC(i8251_device::data_r), FUNC(i8251_device::data_w));
|
||||
map(0xe3, 0xe3).rw("uart1", FUNC(i8251_device::status_r), FUNC(i8251_device::control_w));
|
||||
}
|
||||
|
||||
/* Input ports */
|
||||
static INPUT_PORTS_START( icebox )
|
||||
PORT_START("BAUD")
|
||||
PORT_DIPNAME( 0x0f, 0x0e, "Baud Rate for Terminal")
|
||||
PORT_DIPSETTING( 0x00, "50")
|
||||
PORT_DIPSETTING( 0x01, "75")
|
||||
PORT_DIPSETTING( 0x02, "110")
|
||||
PORT_DIPSETTING( 0x03, "134.5")
|
||||
PORT_DIPSETTING( 0x04, "150")
|
||||
PORT_DIPSETTING( 0x05, "300")
|
||||
PORT_DIPSETTING( 0x06, "600")
|
||||
PORT_DIPSETTING( 0x07, "1200")
|
||||
PORT_DIPSETTING( 0x08, "1800")
|
||||
PORT_DIPSETTING( 0x09, "2000")
|
||||
PORT_DIPSETTING( 0x0a, "2400")
|
||||
PORT_DIPSETTING( 0x0b, "3600")
|
||||
PORT_DIPSETTING( 0x0c, "4800")
|
||||
PORT_DIPSETTING( 0x0e, "9600")
|
||||
PORT_DIPSETTING( 0x0f, "19200")
|
||||
PORT_DIPNAME( 0xf0, 0x70, "Baud Rate for Printer")
|
||||
PORT_DIPSETTING( 0x00, "50")
|
||||
PORT_DIPSETTING( 0x10, "75")
|
||||
PORT_DIPSETTING( 0x20, "110")
|
||||
PORT_DIPSETTING( 0x30, "134.5")
|
||||
PORT_DIPSETTING( 0x40, "150")
|
||||
PORT_DIPSETTING( 0x50, "300")
|
||||
PORT_DIPSETTING( 0x60, "600")
|
||||
PORT_DIPSETTING( 0x70, "1200")
|
||||
PORT_DIPSETTING( 0x80, "1800")
|
||||
PORT_DIPSETTING( 0x90, "2000")
|
||||
PORT_DIPSETTING( 0xa0, "2400")
|
||||
PORT_DIPSETTING( 0xb0, "3600")
|
||||
PORT_DIPSETTING( 0xc0, "4800")
|
||||
PORT_DIPSETTING( 0xe0, "9600")
|
||||
PORT_DIPSETTING( 0xf0, "19200")
|
||||
INPUT_PORTS_END
|
||||
|
||||
void icebox_state::machine_reset()
|
||||
{
|
||||
u8 data = ioport("BAUD")->read();
|
||||
m_brg->write_str(data & 15); // Terminal
|
||||
m_brg->write_stt((data >> 4) & 15); // Printer
|
||||
//m_maincpu->set_pc(0xf000);
|
||||
}
|
||||
|
||||
//static void xor100_floppies(device_slot_interface &device)
|
||||
//{
|
||||
// device.option_add("flop", FLOPPY_8_SSDD); // Pertec "iCOM FD5200"
|
||||
//}
|
||||
|
||||
static DEVICE_INPUT_DEFAULTS_START( terminal ) // we need to remove bit 7 which is on the last character of each message
|
||||
DEVICE_INPUT_DEFAULTS( "RS232_RXBAUD", 0xff, RS232_BAUD_9600 )
|
||||
DEVICE_INPUT_DEFAULTS( "RS232_TXBAUD", 0xff, RS232_BAUD_9600 )
|
||||
DEVICE_INPUT_DEFAULTS( "RS232_STARTBITS", 0xff, RS232_STARTBITS_1 )
|
||||
DEVICE_INPUT_DEFAULTS( "RS232_DATABITS", 0xff, RS232_DATABITS_7 )
|
||||
DEVICE_INPUT_DEFAULTS( "RS232_PARITY", 0xff, RS232_PARITY_EVEN )
|
||||
DEVICE_INPUT_DEFAULTS( "RS232_STOPBITS", 0xff, RS232_STOPBITS_2 )
|
||||
DEVICE_INPUT_DEFAULTS_END
|
||||
|
||||
MACHINE_CONFIG_START(icebox_state::icebox)
|
||||
/* basic machine hardware */
|
||||
MCFG_DEVICE_ADD("maincpu",Z80, 2'000'000) // unknown crystal and clock
|
||||
MCFG_DEVICE_PROGRAM_MAP(mem_map)
|
||||
MCFG_DEVICE_IO_MAP(io_map)
|
||||
|
||||
I8251(config, m_uart0, 0);
|
||||
m_uart0->txd_handler().set("rs232a", FUNC(rs232_port_device::write_txd));
|
||||
m_uart0->dtr_handler().set("rs232a", FUNC(rs232_port_device::write_dtr));
|
||||
m_uart0->rts_handler().set("rs232a", FUNC(rs232_port_device::write_rts));
|
||||
|
||||
rs232_port_device &rs232a(RS232_PORT(config, "rs232a", default_rs232_devices, "terminal"));
|
||||
rs232a.rxd_handler().set(m_uart0, FUNC(i8251_device::write_rxd));
|
||||
rs232a.dsr_handler().set(m_uart0, FUNC(i8251_device::write_dsr));
|
||||
rs232a.cts_handler().set(m_uart0, FUNC(i8251_device::write_cts));
|
||||
rs232a.set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal)); // must be exactly here
|
||||
|
||||
I8251(config, m_uart1, 0);
|
||||
m_uart1->txd_handler().set("rs232b", FUNC(rs232_port_device::write_txd));
|
||||
m_uart1->dtr_handler().set("rs232b", FUNC(rs232_port_device::write_dtr));
|
||||
m_uart1->rts_handler().set("rs232b", FUNC(rs232_port_device::write_rts));
|
||||
|
||||
rs232_port_device &rs232b(RS232_PORT(config, "rs232b", default_rs232_devices, nullptr));
|
||||
rs232b.rxd_handler().set(m_uart1, FUNC(i8251_device::write_rxd));
|
||||
rs232b.dsr_handler().set(m_uart1, FUNC(i8251_device::write_dsr));
|
||||
rs232b.cts_handler().set(m_uart1, FUNC(i8251_device::write_cts));
|
||||
|
||||
COM5016_5(config, m_brg, 4.9152_MHz_XTAL); // BR1941L
|
||||
m_brg->fr_handler().set(m_uart0, FUNC(i8251_device::write_txc));
|
||||
m_brg->fr_handler().append(m_uart0, FUNC(i8251_device::write_rxc));
|
||||
m_brg->ft_handler().set(m_uart1, FUNC(i8251_device::write_txc));
|
||||
m_brg->ft_handler().append(m_uart1, FUNC(i8251_device::write_rxc));
|
||||
|
||||
// MCFG_DEVICE_ADD("fdc", FD1771, 4_MHz_XTAL / 2)
|
||||
// MCFG_FLOPPY_DRIVE_ADD("fdc:0", floppies, "flop", floppy_image_device::default_floppy_formats)
|
||||
// MCFG_FLOPPY_DRIVE_SOUND(true)
|
||||
// MCFG_FLOPPY_DRIVE_ADD("fdc:1", floppies, "flop", floppy_image_device::default_floppy_formats)
|
||||
// MCFG_FLOPPY_DRIVE_SOUND(true)
|
||||
MACHINE_CONFIG_END
|
||||
|
||||
/* ROM definition */
|
||||
ROM_START( icebox )
|
||||
ROM_REGION( 0x1000, "maincpu", 0 )
|
||||
ROM_LOAD( "ice0.bin", 0x0000, 0x0800, CRC(252092c0) SHA1(8b6c53994dbb1aa76fdb6b72961e12071c100809) )
|
||||
ROM_LOAD( "ice1.bin", 0x0800, 0x0800, CRC(f4dc4b93) SHA1(cd8c3b2a1ceb4e5efb35af9bcac7ebaab6a8a308) )
|
||||
ROM_END
|
||||
|
||||
/* Driver */
|
||||
|
||||
// YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS
|
||||
COMP( 19??, icebox, 0, 0, icebox, icebox, icebox_state, empty_init, "Nutting Associates", "ICEBOX", MACHINE_NOT_WORKING | MACHINE_NO_SOUND_HW ) // Terminal beeps
|
||||
@ -15354,6 +15354,9 @@ ibm5160 // 1982 IBM XT 5160
|
||||
ibmpcjr // 1984 IBM PC Jr
|
||||
ibmpcjx // 1985 IBM PC JX
|
||||
|
||||
@source:icebox.cpp
|
||||
icebox // Nutting Icebox
|
||||
|
||||
@source:icatel.cpp
|
||||
icatel //
|
||||
|
||||
|
||||
@ -305,6 +305,7 @@ ibm6580.cpp
|
||||
ibmpc.cpp
|
||||
ibmpcjr.cpp
|
||||
icatel.cpp
|
||||
icebox.cpp
|
||||
ie15.cpp
|
||||
if800.cpp
|
||||
imds.cpp
|
||||
|
||||
Loading…
Reference in New Issue
Block a user