Subject: 8257dma
Hi Aaron,
Small changes for 8257.
Fixed terminal count stop for autoload mode and added callback function existance check [Miodrag Milanovic]
Regards,
Miodrag
convert between attotimes and a clock tick at an integral frequency.
Changed the 6532 RIOT device into a proper device. Rewrote the
logic to be simpler and leverage the new attotime functions. Changed
the I/O port setters to specify a mask, and changed the I/O port
callbacks to pass in the previous value. Updated tourtabl and
gameplan drivers to use the new device interface.
Converted audio/starwars.c, audio/exidy.c, and audio/gottlieb.c to
use the new RIOT implementation instead of rolling their own.
Began gottlieb.c cleanup. Converted palette calculations to resistor
weights. Corrected video timing. Reduced the number of separate
machine drivers. Fixed incorrect spriteram sizes. Populated full
memory maps for the main CPU and the rev 1 sound board. More to
come.
- Rearranged decoding behavior.
- Updated code style to MAME standards.
- Tested each single-word opcode with custom ROMs.
(This is a precursor to other major dsp56k changes I have made. I just gotta' get plygonet commanders up and running to do some tests)
- TGP now correctly uses table roms (model1/2 updated accordingly)
- removed FIFO hack on srallyc (game now runs)
- added analog ports reading for model 2A/B/C
- fixed some loading instructions in the TGP. that fixes srallyc automatic transmission bug
Added validity checks to ensure no duplicate sound or CPU tags.
Fixed several duplicate sound tags from the last checkin.
-listxml now outputs the tag names for CPUs and sound chips.
well, the fix is not that but changing them this way:
program_write_dword_32le(i960.r[I960_FP]-16, i960.PC);
program_write_dword_32le(i960.r[I960_FP]-12, i960.AC);
in take_interrupt.
It seems it came from a partial fix in the ret instruction. the manual says that PC is saved at FP-16 and AC at FP-12
it was reversed in mame, so when trying to fix it, i suppose Ernesto forgot to change the push too.
I've tested this fix and apart from having daytona working, pilot kids 2A works too (that I think has been broken for ages).
MDRV_SOUND_ADD. All sound chips must now include a tag.
Laboriously changed all existing drivers to define a
unique tag for each sound chip.
CPUs are next, but will require a more hands-on manual
process to produce reasonable tags.
properly ignore the "break into debugger" keypress and not allow
related characters to filter through. Removed some hacks related to
making that work in the past.
Changed osd_wait_for_debugger() to take a machine parameter and a
"firsttime" parameter, which is set to 1 the first time the function
is called after a break. The Windows debugger uses this to ensure
that the debugger has focus when you break into it.
EEPROM data, and the size is in terms of units, not bytes. Updated all
drivers accordingly.
Changed the ROM loading code to actually alter the region flags based
on the CPU endianness and bus width when creating the region, rather
than fixing them up on the fly. This means that callers to
memory_region_flags() will get the correct results.
Changed the expression engine to use two callbacks for read/write rather
than relying on externally defined functions.
Expanded memory access support in the expression engine. Memory accesses
can now be specified as [space][num]<size>@<address>. 'space' can be
one of the following:
p = program address space of CPU #num (default)
d = data address space of CPU #num
i = I/O address space of CPU #num
o = opcode address space of CPU #num (R/W access to decrypted opcodes)
r = direct RAM space of CPU #num (always allows writes, even for ROM)
e = EEPROM index #num
c = direct REGION_CPU#num access
u = direct REGION_USER#num access
g = direct REGION_GFX#num access
s = direct REGION_SOUND#num access
The 'num' field is optional for p/d/i/o/r, where is defaults to the
current CPU, and for e, where it defaults to EEPROM #0. 'num' is required
for all region-related prefixes. Some examples:
w@curpc = word at 'curpc' in the active CPU's program address space
dd@0 = dword at 0x0 in the active CPU's data address space
r2b@100 = byte at 0x100 from a RAM/ROM region in CPU #2's program space
ew@7f = word from EEPROM address 0x7f
u2q@40 = qword from REGION_USER2, offset 0x40
The 'size' field is always required, and can be b/w/d/q for byte, word,
dword, and qword accesses.
- All games on all drivers should work as before except "colmns97" and "stress" which crash due to sound system trouble.
- All idle skips are still included. They are quite a bit less effective than they were on the interpreter, but they still give a boost.
- Fast RAM bypass is not included yet so this does not represent final performance. That said, it's consistently faster than the interpreter even now. Example: sfiii3 on 0.126 gets 609% on the interpreter and 961% on the DRC.
Major thanks to Aaron for his assistance with several sticky core bugs and other issues encountered writing this.
lurking. If you run into anything odd, please let me know.
Added new module uiinput.c which manages input for the user interface.
The OSD is responsible for pushing mouse events and character events
to this interface in order to support mouse movement and text-based
input (currently only used for the select game menu). Added support
for navigating through the menus using the mouse.
[Nathan Woods, Aaron Giles]
Redesigned the UI menus so that they can maintain a richer state. Now
the menus can be generated once and reused, rather than requiring them
to be regenerated on each frame. All menus also share a comment eventing
system and navigation through them is managed centrally. Rewrote all the
menus to use the new system, apart from the cheat menus, which are now
disabled. Reorganized the video menu to make it easier to understand.
[Aaron Giles]
- Roll back older periodic function
Now standard/old format work in this function
Otherwords, several operations which doesn't exist in older
function and added recently are now disabled
- Separated load_cheat_code() to 3 indipendent functions
And added new cheat options, "Load New/Standard/Old Format Code"
(Default : load all format codes)
NOTE : delete all cheat options in the database before start
or reload default options (Shift + Reload key)
in cheat general menu
- Added format strings structure to accept huge size strings
in loading a database to prevent from breaking other strings
- Changed Link in new format
Label code is now "Link-Label" and sub-label is "Label-Sub-Link"
"Standard-Link" is no longer label
- Added choose_label_index() to manage label selection
- Fixed build_label_index_table() to prevent from crashing
And disabled to build label index table in case of
standard/old format
- Fixed memory free problem in case of standard/old code
- Fixed several reported/found bugs
* marked IDT instructions for R4650 only
* accounted for time taken in throwaway likely branch slots
* fixed jalr to respect the correct link register
* fixed c.eq, c.lt, c.le to fail if unordered
* fixed swxc1, sdxc1 to use the correct source register (fixes many Gauntlet problems)
* fixed CCR31 display in debugger
* fixes assert: src/emu/video.c:664: visarea->min_x < width
* Test whether screen type is vector and ignore min_x < width in this case
* This affected a number of vector games and the only other fix would be to rewrite the vector code
Subject: another Machine -> machine cleanup
This cleans up most of the Machine stuff in src/emu/machine. There is
a bit left to clean up, but it's mostly stuck at some interfaces now.
Subject: [patch] make MSVC_BUILD=1 -j<n> build fix
Hi mamedev,
The following build tweak fixes make MSVC_BUILD=1 -j2. It also fixes
an oversight in the cross-build support.
~aa
Subject: [patch] Fix minor CPU/SOUND core build issues
Hi mamedev,
This small patch fixes a few build problems with the cpu/sound cores
M65CE02, ALPHA8201, TMC0285, TMS5200 and corrects the dependencies for
the mips core.
~aa
macro from the source code. All MAME builds now include
the debugger, and it is enabled/disabled exclusively by
the runtime command-line/ini settings. This is a minor
speed hit for now, but will be further optimized going
forward.
Changed the 'd' suffix in the makefile to apply to DEBUG
builds (versus DEBUGGER builds as it did before).
Changed machine->debug_mode to machine->debug_flags.
These flags now indicate several things, such as whether
debugging is enabled, whether CPU cores should call the
debugger on each instruction, and whether there are live
watchpoints on each address space.
Redesigned a significant portion of debugcpu.c around
the concept of maintaining these flags globally and a
similar, more complete set of flags internally for each
CPU. All previous functionality should work as designed
but should be more robust and faster to work with.
Added new debugger hooks for starting/stopping CPU
execution. This allows the debugger to decide whether
or not a given CPU needs to call the debugger on each
instruction during the coming timeslice.
Added new debugger hook for reporting exceptions.
Proper exception breakpoints are not yet implemented.
Added new module debugger.c which is where global
debugger functions live.
- Merged 3 different search menu functions to search_main_menu()
- Added new cheat options, "Vertical/Horizontal Key Repeat Speed"
NOTE : delete all cheat options in the database before start
or reload default options (Shift + Reload key)
in cheat general menu
- Changed assignment of Entry for Activation Key and Pre-enable
command code. Now there are check the tag in comment field
instead of index number. But it's only for new format command
and old is as before
- Added tag output in save_activation_key() and save_pre_enable()
- Cleaned up save_cheat_options() to output description
- Changed memory read function in watchpoints
No longer "Debugger" watchpoint mis-hit "Cheat" watchpoint
- Fixed several reported/found bugs
- Renamed funcitons/enum based on coding guidlines
All functions are completed in this update
- connected EEPROM (doesn't seem to affect much)
- cleaned up system register access
GTI Club driver:
- altered network IRQ clear to fix several problems
- added Guru readme
- fixed crashes due to missing inputs
- gticlub "works" again
ZR107 driver:
- added Guru readme
- cleaned up system register access
- these games work again with altered network IRQ timing
NWK-TR driver:
- added Guru readme
DRC frontend:
- now passes pointer to previous instruction when describing
PPC frontend:
- attempts to roughly take into account branch and CR logical
folding in timing computations
- Added configurable i8x41/i8x42 subtype support.
- Fixed carry flag handling in ADDC A,#N instruction.
- Fixed carry flag handling in RLC A instruction.
* added save state support to the SHARC CPU core
* added save state support to the PowerPC recompiler
* added save state support to the virtual TLB system
* added save state support to the RF5C400 sound core
* added save state support to konppc module
* added save state support to K056800 host controller
* added save state support to the Konami hornet driver
Fixed poor default CLUT handling in the voodoo driver
Subject: [patch] memory_region madness reloaded
Hi mamedev,
The memory_region and memory_region_length functions are probably the
two most common functions in MAME that don't take a machine parameter
but should given the syntax of the related apis memory_region_type and
memory_region_flags. Clearly they didn't get the parameter because of
the sheer number of changes needed to change the apis. This pair of
patches makes the change, and deals with the consequences.
The second patch then changes the api for memory_region and
memory_region_length, and fixes the fallout. It generally plumbs
through machine parameters where needed, except for the case of sound
apis which I deferred doing so till later. This increased the number
of deprecat.h includes by ~50. Given it is a massive patch, there are
bound to be a few mistakes in it (I had to make ~20% of the changes by
hand), but I exercised care and reviewed the patch several times to
minimize the problems.
Subject: [patch] memory_region madness reloaded
Hi mamedev,
The memory_region and memory_region_length functions are probably the
two most common functions in MAME that don't take a machine parameter
but should given the syntax of the related apis memory_region_type and
memory_region_flags. Clearly they didn't get the parameter because of
the sheer number of changes needed to change the apis. This pair of
patches makes the change, and deals with the consequences.
The first patch makes some changes to help the second patch
along, as well as moves some uses of the memory_region apis within for
loops outside the loops.
* added save state support to the MIPS3 recompiler
* added save state support to CAGE audio system
* added save state support to the voodoo emulator
* added save state support to the smc91c9x emulator
* added save state support to the kinst, seattle, and vegas drivers
* fixed core video handling of save states with dynamic screen resolutions
SMC91C9x:
* converted to proper device
* updated seattle and vegas drivers to allocate devices
* added separate 91C96 device for eventual 2049 use
* cleaned up code
Removed call to discrete_reset() in the initialization code. It is already
called by the sound system during reset, at which point it is safe to read
input ports.
- reactivated back-end validation mechanism
- added back-end validation for ADD/SUB/MUL/DIV/CMP forms
- fixed several errors in dealing with more obscure flag combinations
on a command-line parameter and the configuration. Changed Windows OSD
code to use this instead of its own logic. Changed -snapview to share the
logic as well, enabling 'auto' as a -snapview option.
Enabled by default for snapshots and movie rendering.
Added new option: -snapsize, which lets you specify the target
resolution for snapshots and movies. The existing behavior is still
the default: create snapshots and movies at native pixel
resolutions.
Added new option: -snapview, which lets you specify a particular
view to use for rendering snapshots and movies. The existing
behavior is still the default: use a special internal view and
render each screen to its own snapshot in its own file. When using
this option to specify a view other than 'internal', only a single
snapshot file will be produced regardless of how many screens the
game has.
Improved AVI and MNG recording to properly duplicate/skip frames
as appropriate to keep the correct framerate.
MAMETesters Bugs Fixed
----------------------
00277: [Misc.] groundfx.c, gunbustr.c, superchs.c, taito_f3.c,
undrfire.c, psikyosh.c: Cheat search causes fatal error
Source Changes
--------------
Updated cheat system
- Changed the function of default memory read in case of the search
to prevent from crashing if a game uses cpu_spinutil()
Now basically used do_memory_read() instead of do_cpu_read()
(Try to search in actfancr between this and previous version)
NOTE : It's not fundamental solution but no longer crash
- Cleaned up read_data() and write_data()
- Cleaned up save/load routine and added open_cheat_database()
- Added new menu "Cheat Commands" into the cheat main menu
the following commands are supported in this menu
* reload cheat code (the same as Reload Database key)
* cheats ON/OFF (the same as Toggle Cheat key)
* watchpoints ON/OFF (the same as Shift + Toggle Cheat key)
* save description (save the title of the game)
* save raw code (save raw cheat code with new format)
- Fixed several bugs which has found in testing
- Renamed functions based on coding guidlines
Subject: 8080/8085 fix
Hello Aaron,
While working on drivers for some 8080 machines, I have noticed that there are some errors in flags settings in CPU implementation.
I have done fixes and now sending patch for code . Also there are changes to set right timings for both 8080 and 8085 since not all timings are up to documentation.
Regards,
Miodrag
Subject: [patch] Static qualifiers, header file cleanups, and new
include files for MAME
The first patch adds static qualifiers where appropriate, adds missing
#include statements, source comments and header declarations, as well
as removes dead declarations. The only part that required judgement
was deciding whether audio/galaxian.c declarations should be in
galaxold.h or galaxian.h, it doesn't make sense for them to be
declared in both. This exercise did find a bug, galaxold_init_stars
was declared incorrectly in video/fastfred.c.
Sent: Thursday, June 05, 2008 9:00 PM
To: submit@mamedev.org
Subject: Machine -> machine cleanups
This cleans up the usage of Machine in many of the src/video files.
* fixed adc/sbb so that they don't optimize out ever
* fixed detection of special and/or/xor cases
* fixed GETFLGS opcode so that it doesn't return anything other than requested flags
* changed LZCNT/BSWAP to be more flexible in register selection
C back-end:
* implemented flag variants of SEXT/ROLAND/ROLINS/LZCNT/BSWAP
PPC DRC:
* added more symbols for debugging
* fixed lmw/stmw if rA is one of the loaded/stored registers
* removed unnecessary variables & structure members
* optimized for the XER and CR0 case where XER doesn't need an overflow calculation
*
* changed SPU receive model to a push model; updated drivers accordingly
* added macros for setting the SPU transmit handler and sending bytes
* cleaned up ppc.h
* added detection of MMU enablement in 403GCX case
* fixed bug in protection bounds violation detection for 4XX to get ppd
to the "ppc4xx_spu_rx_data unimplemented" message
* fixed conflicting layout (not super happy with the technique...)
x64 back-end:
* added a "hop" around the prolog of the HANDLE opcode to allow fall-through
x86 back-end:
* redesigned stack management to keep the stack at the same 16-byte alignment
PPC DRC:
* fixed parameter ordering for masked reads/writes
* Added VBLANK IRQ clear
* Added ATAPI IRQ clear
* Tried to add UART IRQ clear but it doesn't yet work
* Most of the games start to show something again with these changes
* Added fast RAM region
PPC DRC:
* Fixed TLB filling for 4XX protection ranges
PC16552d:
* Tried to wire up assert/clear signals for this chip based on guesswork
(anyone want to implement it properly? :)
* reduced address bus width of 4xx series to 31 bits per the
documentation
PPC DRC:
* fixed bug that would jump to incorrect PC after filling the
TLB during a mismatch event
* added explicit address truncation to 31 bits for 4xx series
* added new PPCDRC_ACCURATE_SINGLES option, which removes the
excessive (and very likely unecessary) extra rounding when
performing the "fast" single-precision floating point ops
Konami drivers:
* designated fast RAM accesses for work RAM
* removed unnecessary mirroring
Model 3:
* identified and fixed VBLANK bit in real3d status which was
causing the system to hang at startup
* designated fast RAM accesses for work RAM
53C810:
* changed read/write handles to proper READ8/WRITE8_HANDLER
callbacks so they can eventually be used directly
* changed from tracking "live" registers to tracking "necessary" registers
* genericized register tracking to be more flexible
* added previous instruction pointer to opcode descriptions
PowerPC frontend/DRC:
* cleaned up register tracking implementation
* fixed numerous errors and shortcomings in the tracking
* added support for removing unnecessary XER CA and CR0 computations
* updated UML logging to output new frontend statistics
MIPS3 frontend/DRC:
* tweaked register tracking to match new DRC frontend system
* updated UML logging to output new frontend statistics
* fixed DIVS/DIVU opcode so they properly compute SZ flags when requested;
fixes camera wackiness in nbapbp
PPC DRC:
* added support for 4xx protection registers via the MMU
* added TLBH, TLBU, and DEC to the list of registers in the debugger
* turned off "end of transfer" DMA signals in favor of "transfer count 0"
signals; fixes memory-to-memory DMA in fiveside
* Converted sysreg_r/w to 8-bit handlers
* Added hack to make network IRQs work; brings some games back to life
UML:
* Fixed STORE opcode description to allow immediate source operands
x86/x64 back-ends:
* Added flag support to SEXT, ROLAND, ROLINS, LZCNT opcodes
PPC DRC:
* Rewrote lswi/stswi as subroutines
* Made accesses to tempdata explicitly dword or qword
* Fixed SRR0 when generating a syscall
* Removed no longer necessary TESTs on extsb/w, rlwinm, rlwnm, rlwimi, cntlzw
* Fixed bug where the SO flag was not being computed for compares
* Fixed flag computations for mulhw/mulhwu/mullw
* Fixed subtlety of shifts between 32 and 63 in srw/sraw
* Fixed mffs/mtfsf to use FP registers
* Fixed mtfsfi to use the immediate value properly
* Now marking terminal count bit in DMA status register
* Added simple symbol table to the UML for improved disassembly
* Changed optional disassembler cache parameter to a drcuml object
PPC DRC:
* Added symbols for most common variables
* Fixed bug in handling XER carry flag for subo. forms
* Simplified flag insertion logic for opcodeo. forms
* Added logic to simplify opcodes as much as possible at the UML layer.
* Removed similar logic in the x86 and x64 back-ends.
* Added stricter parameter validation for registers and mapvars
* Removed explicit flag requests from the shorthand opcodes
* Added optimization function to drcuml which is called at block end
* Added logic to compute the necessary flags based on upcoming opcodes
and only select those flags which are required
* Updated the PPC and MIPS3 DRCs to no longer explicitly specify flags
* Wrote new disassembler based on enhanced opcode info structure.
* Moved disassembler into drcuml.c and removed old code.
* Extended disassembler buffer sizes to at least 256 bytes.
* Added more extensive per-opcode information in preparation for UML
optimization step.
* Made validation more thorough using the extended information.
* Disabled back-end validation for now until it can be revisited
using the new tables.
* Changed GETFLGS encoding so that the mask is in parameter 2 instead
of the flags field.
----------------------
- 01845: [Core] all games: cheats are broken
- 01846: [Misc.] -CHEAT trigger causes MAME crash with PSX-type CPU drivers
Source Changes
--------------
Updated cheat system
- Locked search region when malloc fails to allocate gigantic memory
instead of fatal error. Also locked zero malloc error in case of
search speed = all memory in 32-bit CPU. And added search region
range checker to lock a search region with a big risk
- Fixed a bug that old code is always converted to specified
separator in enable/disable menu
- Refined new cheat format.
* Rewritten cheat format again. newest format is
":gamename::type::address::data::extend_data:(description:comment)"
Expanded type field now requires 10 bytes (not 8 bytes) and
it divides internal cpu (2 bytes) and type (8 bytes) parameters
* Removed VWrite, VRWrite. The flag of Value Selection is merged
into expanded type field now.
* Added CBit (Condition Bit). This checks bit in read data then
set or clear bit in case of true.
* Rearranged cheat code viwer based on newest cheat format
- Fixed unworking Load Old Format option. If you want to load old or
older format code, set it (default is OFF)
- Renamed functions/structures based on coding guidlines
All structures and included parameters are completed
- Merged resize_*_no_dispose() into resize_*()
- Removed the hack of search region for SH-2 CPU because required
region is now set as expected without this hack
Subject: [patch] memory_region madness
The memory_region and memory_region_length functions are probably the
two most common functions in MAME that don't take a machine parameter
but probably should given the direction MAME has been going in
removing global variable references. Attached are massive patches to
accomplish this. I wish they could be smaller, but sadly, this is
butchery, not brain surgery.
The first patch makes some simplifications to help the second patch
along. It is a general improvement as well, and hopefully can be
applied even if the second patch is rejected. Specifically:
1. Introduced/updated some include files for files that export
functions whose apis will need to be changed (cps1.h, decocrpt.h,
ms32.h, pgm.h, fd1089.h, konami1.h). In the case of konami.c, I
renamed the file konami1.c and changed the api and callers to only
require one function export.
2. Pulled memory_region*() calls out of for loops and folded the
occasional duplicated call. The compiler can't likely infer that the
results are constant, so this should be a minor performance win as
well.
- rewrote PowerPC implementation as a dynamic recompiler on top
of the universal recompiler engine
- wrote a front-end to analyze PowerPC code paths and register usage
- wrote a common shared module with C implementations of tricky
CPU behaviors
- added separate CPU types for the variants supported, instead of
relying on a hidden model enum
- rewrote the serial port emulation for the 4xx series to be more
accurate and not rely on separate DMA handlers
- rewrote the MMU handling to implement a software TLB that faults
in pages and handles changed bits appropriately
- implemented emulation of the PowerPC 603's software TLB, which
allows the model 3 games to run without a hack to disable the MMU
Updated the PowerPC disassembler to share constants with the rest of
the core, and to more aggressively use simplified mnemonics, especially
for branches. [Aaron Giles]
Universal recompiler:
- fixed frontend to handle opcode widths different from bus width
- added several new opcodes:
* (D)GETFLGS - copies the UML flags to a destination operand
* FDRNDS - rounds a double precision value to single precision
- renamed several opcodes:
* SETC -> CARRY
* XTRACT -> ROLAND
* INSERT -> ROLINS
- consolidated the following opcodes:
* LOAD?U -> LOAD
* LOAD?S -> LOADS
* STORE? -> STORE
* READ?U -> READ
* READ?M -> READM
* WRITE? -> WRITE
* WRITM? -> WRITEM
* SEXT? -> SEXT
* FTOI?? -> FTOINT
* FFRI? -> FFRINT
* FFRF? -> FFRFLT
- removed some opcodes:
* FLAGS - can be done with GETFLGS/LOAD4/ROLINS
* ZEXT - can be achieved with AND
* READ?S - can be achieved with READ/SEXT
- updated C, x86, and x64 back-ends to support these opcode changes
- updated disassembler to support these opcode changes
MIPS3 dynamic recompiler:
- updated to use new/changed opcode forms
- changed context switch so that it only swaps a single pointer
Konami Hornet changes: [Aaron Giles]
- updated to new PowerPC configurations
- updated some memory handlers to be native 8-bit handlers
- cleaned up JVS implementation to work with new serial code
- added fast RAM for the work RAM to give a small speed boost
Konami GTI Club changes: [Aaron Giles]
- updated to new PowerPC configurations
- updated some memory handlers to be native 8-bit handlers
Konami Viper/ZR107 changes: [Aaron Giles]
- updated to new PowerPC configurations
Sega Model 3 changes: [Aaron Giles]
- updated to new PowerPC configurations
- reimplemented/centralized interrupt handling
- these games are broken for the moment
Fixed crasher due to some Konami games using 8 layers in
the K056832 implementation, even though it was only written
for 4. [Aaron Giles]
Added fisttp opcode to i386 disassembler. [Aaron Giles]
- Added Microbus support, clock divisor selection, and CKO mode selection to the COP420
- Changed Thayer's Quest keyboard interface to at least slightly resemble the schematics
- Styling changes
- Added instruction cycle counts.
- Added interrupt support.
- Added HALT support.
- Fixed INT instruction.
- Added incomplete support for DIV and MUL instructions.
- Fixed MOV [#nnnn],BA and MOV [#nnnn],HL instructions.
* added NODE_RELATIVE(NODE, offset) macro to discrete.h
* fix asteroid.c, canyon.c, skydiver.c and tank8.c to use this macro instead of adding directly to the node
fixed Testers bug [01039]
-------------------------------
Updated cheat sytem drastically
* Supported (preliminary) new cheat format
- Added new operations
PDWWrite, RWrite, VRWrite, CWrite, Move, Branch, Loop, Popup
- Added new options
ValueSelectNegative, Return, AddressReadFrom, DataReadFrom
- Added cheat variables
You can store data with Write or Move operations and
read as an address or data from each fields
- Added condition check
for CWrite, Branch and Popup operations
- Added new custom codes
Separator, Layer
- Supported Shared Code [MESS ONLY]
different machine shares common code for a game
* Allowed mixed label-select or user-select with standard code
* Added label selector menu for label-selection code
* Added extend comment displayer for multi-line comments
* Added command menu for cheat list and watchpoint
Easy selectable cheat commands in this menu
* Added debug view menu [DEBUG BUILD ONLY]
It displays internal info to debug cheat system
* Supported unique separator by ui_draw_menu() in several menus
* Added user defined search region
You can set free memory range from cheat database
* Enhanced error check for cheat code to prevent from unexpected working
Error code is locked. If you select this code, the analyser works
instead of the code activater
* Enhanced value input with keyboard-less
Cheat edit key gives new input system in several menus
Left/right keys moves the edit cursor and up/down keys changes a value
* Added cheat command save, reload, reset in option menu
* Supported address shift in searching
Now searchable default region in TMS340*0 cpu games (Trog, Smash T.V. etc)
* Refined cheat menu handling with function pointer called cheat_menu_handler
* Added format strings table to manage in an integrated fashion
* Deleted unused hacks of default search region for Neo Geo and TMS34010
* Refined code based on MAME coding guidelines
- Renamed many functions/structures/constants
But not complete due to too many items
- Converted small but often used functions to INLINE
- Fixed a comparison in case of 0 or NULL
- Added missing function prototype for several functions
names are generated.
Added new astring functions astring_del, astring_replace, and astring_replacec
to help perform simple search/replace substitution.
1. In the MIPS core:
- renamed struct mips3_config -> mips3_config
- updated all drivers to the new names
- removed MIPS3DRC_STRICT_COP0 flag, which is no longer used
- a few minor cleanups
2. In the CPU interface:
- added new 'intention' parameter to the translate callback to
indicate read/write/fetch access, user/supervisor mode, and
a flag for debugging
- updated all call sites to pass an appropriate value
- updated all CPU cores to the new prototype
3. In the UML:
- added new opcode SETC to set the carry flag from a source bit
- added new opcode BSWAP to swap bytes within a value
- updated C, x86, x64 back-ends to support the new opcodes
- updated disassembler to support the new opcodes
4. In the DRC frontend:
- fixed bug in handling edge case with the PC near the 0 or ~0
Changed error reporting during input port detokenization to fill a buffer
rather than fatalerror-ing immediately. Should now properly skip over
any invalid tokens.
Enhanced error detection during input port detokenization to catch
duplicate bits. There are a lot of these!
Updated initialization code to print errors and fatal only if the input
ports were unable to be constructed at all.
Typedef'ed a real eeprom_interface structure.
Added a PORT_CUSTOM for the eeprom bit reading. Updated several
drivers to use that by specifying it in their input ports instead
of having a custom read handler that inserted the bit forcefully.
Added a PORT_CUSTOM for the ticket dispenser callback as well.
Updated the dcheese driver to use it.
Many more drivers can be updated to use these new PORT_CUSTOMs
in the future, eliminating hacky input port read handlers.
mode DIPs on the top of the menu
Fixed behavior of toggle switches so that they don't lose their value
when the UI is up. They also can now be used for multibit DIP switch
settings in which case they toggle through all the options.
New functions input_field_select_next_setting() and
input_field_select_previous_setting() which can be used to iterate
properly through DIP switches. Fixed the behavior for cases where
conditional ports are in play (you could get stuck). Changed uimenu.c
to call these instead of implementing its own.
Changed uimenu.c so that hitting ENTER on a DIP switch resets it to
its default value. This is analagous to how the OSD sliders behave.
- Reworked the color routines switching to resnet system.
- Added a resistor network diagram.
- Switch to pre-defined crystal value.
- Changed the WATCHDOG_TIME_INIT to be based on miliseconds instead of hertz.
- Other minor cleanup/fixes.
- Updated technical notes.
Subject: [patch] Missed Machine->machine changes
Hi mamedev,
A short incremental to my last deprecat.h patches. This one is the
result of a slightly improved fixup script, which finds more cases
where Machine can be replaced with machine. Six more files lose
deprecat.h.
~aa
Subject: [patch] More Machine->machine changes, add machine to irq
callbacks
Hi mamedev,
Here are two more patches to eliminate Machine globals. The first
patch was autogenerated by the attached fixup script. That script has
been updated to catch additional cases which it previously missed
(when Machine is the last parameter to a function or Machine is used
in an assignment). This makes ~50 more files deprecat.h free.
A sizable chunk (~20%) of the remaining uses of the Machine global in
the drivers are due to irq callbacks for sound and machine updates.
Typically such callbacks need to call cpunum_set_input_line, which
requires a machine parameter, so if the callbacks don't pass the
machine parameter, these routines have no choice but to reference the
global variable.
The second patch attempts to address most cases of this by adding the
machine parameter to the callback interfaces. This allows us to
remove #include "deprecat.h" from ~150 files, at the cost of having to
fix up hundreds of callbacks.
In total, these patches reduced the number of files with deprecat.h
from 783 to 575.
~aa
Subject: saturn CPU patch
Dear MAMEDev,
The attached patch corrects several bugs in the emulation of the saturn
CPU. These corrections are needed to make new HP48 drivers (to be
submitted to MESS imminently) work.
AFAIK, MESS is the only place where this CPU is used, so, the patch
should
not cause any regression in MAME.
The patch is against 0125u1.
Best regards,
-
Antoine Mine
* Added new opcode LZCNT which returns the number of leading zeros in
a parameter.
* Added new opcode XTRACT which is a combined rotate/mask (basically
rlwinm from PowerPC)
* Added new opcode INSERT which is a combined rotate/mask/blend
(basically rlwimi from PowerPC). Best. Opcode. Ever.
* Updated all back-ends to support these new opcodes.
* Fixed several bugs relating to shifts/rotates and optimizing out
cases incorrectly.
MIPS3 DRC changes:
* Updated to use INSERT and XTRACT where appropriate
* Cleaned up register usage to enable an additional direct mapping;
this means Linux gets 1 now and Windows gets 3
machine registers if the machine supports it. Currently only x64 on
Windows has enough free registers to do so, though PowerPC will almost
certainly be able to take advantage of this. Gives a minor speedup.
* Fixed front-end so that virtual no-op instructions are still targeted
as branch targets.
* Fixed front-end to mark the beginning of each sequence as needing TLB
validation, since any sequence can be jumped to from anywhere.
* Redid the MIPS3 TLB implementation. Fixed the exception vector and
type handling. Changed the bitfields to directly map from the MIPS TLB
format. Added distinction between TLB fill and TLB valid/modified
exceptions.
* Added separate modes for user, supervisor, and kernel modes. Each mode
does proper verification of addresses now and generates address errors
for invalid accesses.
* Fixed several bugs in the TLB implementation; not everything works
yet but it's a lot closer.
* Made COP0 access checking mandatory in non-kernel modes.
* Fixed several crashes when recompiling virtual no-ops.
* Fixed TLB bug where entries for virtual address 0 were present by
default.
* Fixed bug in the map variable implementation that would sometimes
result in incorrectly recovered values.
This will be expanded in the future.
Added two new opcodes: SAVE and RESTORE to save and restore the entire
virtual machine state for examination/setup.
Added new back-end function get_info() which returns information from
the back-end about how many actual registers will be mapped.
Fixed a bug that mapped the high a low parts of registers to the same
address. This should help the C back-end run better on big-endian
architectures.
* Input ports are now maintained hierarchically. At the top
level are input ports, which contain a list of fields. Each
field represents one or more bits of the port. Certain fields
such as DIP switches and configuration switches contain a
list of settings, which can be selected. DIP switch fields
can also contain a list of DIP switch locations.
* Normalized behavior of port overrides (via PORT_INCLUDE or
by defining multiple overlapping bits). All fields within a
port are kept in strict increasing bit order, so altered DIP
switches are now kept in the appropriate order. This addresses
MAMETesters bug 01671.
* Live port state is now fully separate from configured
state. This is manifested in a similar way to devices, where
a const list of ports can be managed either offline or live.
Each port has a pointer to an opaque set of live state which
is NULL when offline or valid when live. Each port also has
a running_machine * which is also NULL when offline.
* Because of this new arrangement, the conversion from tokens
to a list of ports now requires reasonably complex memory
allocation, so these port lists must be explicitly allocated
and freed (they are not mantained by automatic resource
allocation).
* Custom and changed callbacks now take a pointer to a field
config instead of a running machine. This provides more
information about what field triggered the change notification.
The machine can be found by referenced field->port->machine.
* The inptport.c module has been cleaned up and many
ambiguities resolved. Most of this is internal, though it did
result in osd_customize_inputport_list() being changed to
osd_customize_input_type_list(). The parameter to this function
is now a linked list instead of an array, and the structures
referenced have been reorganized somewhat.
* Updated config.c to pass machine parameters to its callbacks.
* Updated validity checks, XML output, and UI system to handle
the new structures.
* Moved large table of default input settings to a separate
include file inpttype.h.
* Removed gross hacks in trackfld and hyperspt NVRAM. These
may be broken as a result.
Subject: [patch] Remove opbase globals from the public interface
Hi mamedev,
There are several variables associated with opbase handling which are
global and documented in memory.h and thus their use is not well
controlled. This patch attempts to remedy this. Because they are
used in various inline memory functions, they can't yet be made local
to memory.c, but by rescoping their declaration they can be hidden,
much like we hide totalcpu.
Most of the uses are in OPBASE_HANDLER() macros, so by encapsulating
the opbase state into a struct and adding that to the handler
interface those can be converted to local variable manipulation. There
is one use in missile.c in a MACHINE_START that I simply removed, it
shouldn't be needed.
One side effect of this patch is that the various unsafe memory macros
can't be used directly, they will be a compiler error now. That is
probably for the best.
~aa
to write RGB bitmaps. Unfortunately, the only option is fully
uncompressed, which means the resulting AVIs are *HUGE* and
may not play correctly in realtime due to high data rate. The
intention is that these uncompressed AVIs are post-processed
by other utilities to compress the video and produce a
realtime playable result.
Added new command-line option -aviwrite which works just like
-mngwrite, except it produces AVIs and streams sound to them.
Updated documentation accordingly.
Shift+F12 still produces MNGs for now, though this might change
in the future.
Modified fileio.c to retain the full pathname to the file so
that it can be queried while the file is open.
is drcuml.c, which defines a universal machine language
syntax that can be generated by a frontend recompiler and
then retargeted via a generic backend interface to any of
a number of different architectures. A disassembler for the
UML is also included to allow examination of the generated
UML code.
Currently supported backend architectures include 32-bit x86,
64-bit x86, and a platform-neutral interpreted C backend that
can be used as a fallback for platforms without native
support. The C backend also performs additional validation
to ensure assumptions are met.
Along with the new architecture is a new MIPS III/IV
recompiler frontend. This frontend has been rewritten from
the old x64-specific recompiler to generate UML opcodes
instead. This means that the single recompiler can be used
to target multiple backend architectures and should in
theory produce identical results across all of them.
The old 32-bit and 64-bit MIPS recompilers are now officially
retired. The new system provides similar performance (within
5% generally) to the old system and has similar compatibility.
The only currently known issues are some problems with the
two Gauntlet 3D games.
Subject: PIC 8259 changes
Hello Aaron,
As I have announced before, here are some changes on pic8259.
for changelog:
[PIC8259] Adding support for 8080/85 mode interrupts
Please just check it against x86 platform, not sure if is_x86 in ICW4 is obligatory in case of using it on x86 platform.
Regards,
Miodrag
Subject: [patch] Small deprecat.h related cleanup
Hi mamedev,
While doing some work on eliminating some uses of deprecat.h, I came
across a few files that didn't have it that used deprecated features.
A little investigation revealed they were getting it through
debugger.h, typically by referencing m68000.h. Since deprecat.h is
intended to document the files that need updating (otherwise it would
just be included in a common header), I reworked debugger.h to not
import it when the debugger is not enabled, and fixed the files that
broke as a result.
~aa
Subject: [patch] Remove more Machine globals, #include "deprecat.h"
Hi mamedev,
The attached patch goes through and converts a number of Machine
globals to machine locals, and then removes #include "deprecat.h" if
appropriate. The script that generated it is included, since the
patch itself is rather large and would have been time consuming to
produce otherwise.
The script doesn't convert cases of Machine that aren't in common
macros. I'll try to tackle those later if someone doesn't beat me to
it.
~aa
Subject: [patch] Eliminate assignments in conditionals
Hi mamedev,
Assignments in conditionals are never really needed in C and are
occasionally just plain bugs (== gets typed as =). As such, it would
be good to remove these from MAME so that compilers that warn on this
construct can flag the likely bugs (MSVC does this for example). The
attached patch does just that. In addition, it refactors some
repeated code which had this in taito_f3.c into a couple macros. Using
inline functions would unfortunately have required more significant
changes, perhaps I'll tackle that another day.
~aa
* change DC offset for AY-3-8910 to 0.2V
* tones are now distinguishable again
galaxian.c:
* adjust "konami" sound volume
gyruss.c:
* adjust sound volume
* adds a model to calculate mixing of channels with different resistance loads.
* based on above, each channel may be assigned a different load in individual case
i.e. channels not tied together
* rewrote ay8910.c to make emulation simpler
* changed the config structure to include a flag field and output resistor loads.
* Updated all drivers affected.
* Added some "Todos" related to stuff I discovered when reading datasheets.
* Fixed a bug in disc_flt.c (konami filters)
galaxian.c:
* Fixed discrete sound and konami filter addressing
* Changed addressing of AY-3-8910 to be in line with schematics
gyruss.c:
* Added discrete sound for filtering ("konami"-style) and mixing.
Hello Aaron,
I have found few more things not ok in T11, this time I have fixed it myself.
1. HALT - should call interrupt vector
2. ILLEGAL - had PC=0 at the end which makes code not run fine
3. MARK - now it is implemented
Can you please check if your drivers are working fine with these cahanges.
After adjustments I have some things working finaly.
Please inform me,
Miodrag Milanovic
Subject: [patch] Fix 01711: connect4, mpu4met0, mpu4tst2, mpu4utst, bctvidbs: Using -CHEAT trigger causes a crash
Hi mamedev,
This patch fixes bug 01711. Given the location of the original assert
it is clear the original code wasn't quite right.
~aa
Subject: [patch] Fix 00149: No error report for invalid BIOS setting.
Hi mamedev,
This small patch makes specifying an invalid bios a fatalerror and
removes the need to expose system_bios to the drivers by reworking the
code in playch10.c to determine its bios more directly (in other
words, it removes an ugly hack). This should resolve bug 00149,
although I did not implement the popmessage as suggested.
~aa
Attached is diff which makes Touchmaster games playable.
General changes:
- Added preliminary 68681 DUART (machine\68681.c)
- Moved Microtouch touch screen controller emulation to separate module (machine\microtch.c)
New games added or promoted from NOT_WORKING status
---------------------------------------------------
Touchmaster [Mariusz Wojcieszek]
Touchmaster 3000 [Mariusz Wojcieszek]
Touchmaster 4000 [Mariusz Wojcieszek]
Touchmaster 5000 [Mariusz Wojcieszek]
Touchmaster 7000 [Mariusz Wojcieszek]
direct byte, word, dword, and qword accessors for all bus sizes,
there are now masked word, dword, and qword accessors for all
bus sizes.
IMPORTANT: masks that are passed to the _masked_* functions are
NOT inverted. Although inverted masks are still passed to callback
functions, when you request a masked read or write the masks should
represent the bits you want.
Updated the various MIPS cores that use these functions to invert
their masks.
Added support in the T-11 core for an external vector via irq_callback.
Apparently the hardware actually did support this and it is necessary
for emulating the BK 0010/11 computer in MESS.
range to be RAM-like for reads but calls the given handler for writes.
Replaced AM_READWRITE(SMH_RAM, handler) with AM_RAM_WRITE(handler).
Also replaced AM_RAM AM_WRITE(handler) with AM_RAM_WRITE(handler).
accordingly.
Added new functions for dynamically installing device memory
read/write handlers.
Updated install_memory_XXX_handler() functions to take a machine
parameter. Updated all drivers accordingly.
Merged installation of read and write handlers where appropriate.
Simplified memory.c code for dynamic installation so that a single
function handles all the work; a NULL read or write handler
indicates not to install anything for reads or writes.
memory maps. To do so, you either need to specify a shift amount
(mapping to a particular subset of the bus) or SHIFT_PACKED, which
maps a single larger sized read/write down to multiple reads or
writes at the smaller size.
Removed word-sized handlers from 6821pia.c. Updated drivers that
needed them to use these new interfaces instead.
Updated gaelco3d.c and itech8.c to remove the need for memconv.h
by using this new feature.
Re-removed input_port_set_digital_value().
src/emu/cpu/m68000/m68kmame.c:
src/emu/cpu/minx/minx.c:
- Fixed compilation errors on CPU cores not enabled in MAME
src/emu/inptport.c:
src/emu/inptport.h:
- Readded input_port_set_digital_value() (which is needed for natural
keyboard inpout in MESS)
- Added a running_machine parameter to inputx_update()
* save state support for FD1094 chips
* improved graphics in athena
* improved sound balance in armedf
* derived refresh rate for toaplan1 games
* improved sound balance in tmnt games
* derived clocks for suprridr
* tweaked xmen visible area
* derived clocks and refresh rate in twin16 driver
Subject: change for cpunum_set_irq_callback() callback function
This patch adds the running_machine* parameter to the function passed
into cpunum_set_irq_callback() and adds the IRQ_CALLBACK macro for
the callback function.
Subject: Update for "Euro League (bootleg)"
Hello,
some tiny updates for the driver wc90b.c :
-Added dumps for all GALs on the PCB
-Removed the second YM2203, it isn't present on the bootleg boards
-Changed the clocks according to the oscilators found on the board,
the previous speeds were measured on a goal92 PCB, not using a real "Euro League" PCB.
-Added a new osc to xtal.h
If you need any info about this update, please mail me.
Regards: ClawGrip (Tomas Garcia-Meras)
--
Also merged memory maps [Aaron Giles]
only remaining form is the one that takes a pointer parameter.
Added macros for STATE_PRESAVE and STATE_POSTLOAD to define common
functions. Added machine parameter to these functions.
Updated all drivers and CPU/sound cores to use the new macros
and consolidate on the single function type. As a result pushed
the machine parameter through a few initialization stacks.
Removed unnecessary postload callbacks which only marked all tiles
dirty, since this is done automatically by the tilemap engine.
trace through in a debug build, yet should operate the same as before.
Created a complete set of functions for all databus sizes (8,16,32,64) and
all endiannesses. A few functions are redundant, but it is now very clear
which functions to use in which scenarios. It is also now possible to rely
on being able to access values of 8, 16, 32 or 64 bits via the built-in
accessors without fear of crashing.
Updated all cores using 8-bit handlers to explicitly call the 8-bit handlers
with the appropriate endianness.
Fixed a few games which were calling n-bit handlers directly to use the
generic forms. In the future, this is all the access drivers will have.
fixed reading from SXYP
fixed reading from IRGB
fixed writing to LZCR
fixed sign extension of GTE control registers
fixed writing to FLAG
New games added or promoted from NOT_WORKING status
---------------------------------------------------
1 on 1 Government (JAPAN)
Added ability to test the instruction/data cache ram. The scratchpad and BIU register are now handled internally to the CPU.
All writes are performed with masks. SWL/SWR used to be implemented with two writes ( one byte and one word ) when writing three bytes, now it only ever performs one. Byte and Word writes use masks as they leave the rest of the register on the bus, which can be picked up by larger registers.
The read/write functions to use are cached when the SR bits are updated, as are the bad address masks.
Added coprocessor 1 & 3 support, though they don't do anything useful.
All loads now go through the delay pipeline, a lwl/lwr will grab the value out of the pipeline if it's updating the same register.
Added undocumented behaviour of BLEZ/BGTZ. The comparison for zero can be changed by specifying an alternate register in the RT field ( the documentation says you should always use register 0 ).
Restricted to 16 COP0 registers & generate an exception if any of the 5 for the MMU are used.
Added BCF/BCT instructions, although I have found no conditions that affect them yet.
Generates an exception if any MMU instructions are executed.
Sets the CE instruction for all exceptions, not just those involving a coprocessor. The bits of the opcode that specify the coprocessor are grabbed no matter what the instruction.
Added TAR register and BT bit in SR. When an exception occurs during a branch, BT determines whether it was taken or not. The TAR register gets set to the destination of the branch.
Fixed the BD bit when you are in a branch delay slot and you didn't take the branch, this shows up in the pipeline as !pc.
Fixed branches within a branch delay slot.
Multiply & divide instructions can be aborted if you write to HI/LO before reading the result.
Added data breakpoints, you don't appear to be able to set breakpoints on any of the addresses internal to the CPU.
Multiply/divide/GTE instructions can execute when an exception is taken, although the EPC indicates that it hasn't. The BIOS avoids rerunning GTE instructions as they are destructive, so you have to make sure they run.
Added bus error handling, PSXCPU is limited to 8mb of ram & any access outside this range will trigger an exception. I believe this is to be an internal limit.
Added CXD8611R as a specific CPU type, System 12 appears to allow more than 8mb of ram & it's possible that this is different.
Mapped out all instructions to either generate an exception or ignore bits.
Updated the disassembler to match the decoding.
Fixed disassembling of branch instructions in a branch delay slot.
Lui checks for a ori/addiu following and will show you the result.
Added step over/out support.
Fixed standalone disassembler.
Rewrote INP recording from scratch, since all old INPs are broken anyways.
Header now includes timestamp, which overrides the default time base for MAME's system time.
Each frame recorded now gets a timestamp.
Analog ports are recorded once per frame and interpolated.
Analog port calculations are all done in fixed point for consistent results.
A bunch of other minor tweaks in the input port code.
There may still be a few changes to the final INP format (considering adding
NVRAM data directly in the INP file, for example....) but this at least seems
to work for the games I've tried.
All custom itemids were mapped to class SWITCH. With the recent modification, this implicitly changed to ABSOLUTE.
This fix will use the passed itemid to determine the class.
Subject: pit8253 device
I have converted the pit8253 implementation into a device. To make it
easier to use I've also created a src/emu/devconv.h in the same style
as src/emu/memconv.h.
I do not have all roms/disk images to test all drivers. I have only
been able to test pf2012, filetto, and topgunnr.
Subject: Further ACIA changes
Added dynamic control of RX and TX pins to 6850 ACIA emulation - this is
needed for correct operation of the MPU4 Video communications system,
and may be handy for some MESS systems. To use, set the rx and tx clocks
to 0 in the acia interface, then use acia_tx_clock_in() and
acia_rx_clock_in() respectively.
Subject: small change for MESS cleanup
This adds the "Machine" parameter to a MESS function call in MAME
code to go along with Machine -> machine ckeanups in MESS
Subject: Machine -> machine cleanups
This patch changes "Machine" to "machine", when the runnin-machine
parameter is already available. In some cases I could even remove the
dprecat.h.
I will look for some occurances where it can be easily changed and
afterward take a step at adding the running_machine parameter in a
few places.
* Fix timing of stream_update in discrete_sound_w
All sound cores update before processing changed data
* Add streeam_update to discrete_sound_r
* Now supports multiple output nodes per module.
There is the possibility to support multiple outputs per module.
In this case, NODE_XXX is the default output. Alternative outputs may
be accessed by using NODE_XXX_YY where 00<Y<08.
You may also access nodes with macros:
NODE_XXX = NODE_SUB(XXX, 0)
NODE_XXX = NODE(XXX)
NODE_XXX_YY = NODE_SUB(XXX, YY) with YY != 00
This should e.g. make discrete sound emulation easier
when dealing with e.g. flip flops (Q & QQ) and binary counters
* added sanity checks to check consistency issues introduced by this change
* modules specify number of outputs ==> Certain special modules (WAVELOG)
may no longer be used as input nodes
* removed explicit (NODE_XX + expr) from a couple of drivers
All occurrences of ACCESSING_LSB, ACCESSING_MSB, ACCESSING_LSB16, ACCESSING_MSB16, ACCESSING_LSB32, ACCESSING_MSB32, ACCESSING_LSW32, ACCESSING_MSW32 & simple mem_mask checks have been replace with the new macros.
The old macros are gone.
* Give us a Break [2 sets]
* Ten Up [2 sets]
Neither are playable; they don't register coins for some reason.
2. Fixed interrupt handling and 16-bit memory accessors in 6840ptm.c
Also cleaned up code for the sake of readability.
3. JPM games now have their own object archive file.
- implemented serial input/output
- fixed XAD/LDD, XIS1, RMB3 opcodes
- fixed clock divider
- fixed internal memory map size
- added some cpu variants
As a result, Draco at least initializes the AY-8910 now.
* itemclass now part of token if item is not found
Settings for joysticks which use a custom item id will still be lost. A fallback has to be provided here since those will use a token generated from the input item name.
Subject: Unnecessary assert in video.c
The assert
assert(machine->config->devicelist != NULL);
in video.c causes the MESS mk1 driver to fail because it doesn't have
any devices - no screens and no sound devices. It works fine when the
assert is removed.
--Dirk
Subject: SH-4 debugger output fix
This patch fixes "garbage" (newlines) in the debugger window when
debugging the SH-4 CPU.
It also conatins a small comment fix in video/playch10.c and the
removal of some yet unused or just obsolete macros in emu/cpuint.h.
a NULL list head (in which case you have an empty device list). All the
code works fine with a NULL head and returns appropriate values. Removed
changes to video_screen_count() and video_screen_first() which were added
to work around this behavior.
or not the VIDEO_UPDATE was called as a result.
Modified amiga.c to use this information so that we guarantee a call
to amiga_render_scanline() regardless of the video state.
Fixes 01521: ar_sdwr: Game hangs on title screen
This is still WIP bug I've been working on it for sveral weeks and I want to get it out before leaving for holidays.
- Fixed Alpha 8201/830x MCU simulation.
- all hacks from the equites driver removed
- fixed equites restart position after going underground
- fixed hvolume, splndrbt 2 players
- removed hacks from exctsccr2
- fixed CPU gameplay in shougi
- Gekisou promoted to working
- added dump of Alpha 8201 MCU to games that use it (the ROM isn't used yet, HMCS44 CPU core needs to be written first)
- major cleanup of the mess in equites.c:
- many thanks to Corrado Tomaselli for precious hardware info.
- implemented bg perspective scrolling using PROMs
- fixed sprite flip & disable
- fixed bg color
- converted bg to tilemaps
- fixed fg banking
- fixed screen flip
- removed meaningless banking of player inputs
- added UI adjuster for MSM5232 frequency
- MSM5232 volume control
- fixed MSM5232 noise LFSR formula (done by Jarek Burczynski; thanks to Corrado Tomaselli for samples)
- changed MSM5232 emulator to output channels separately
- added output of SOLO channels to MSM5232 emulator.
- mametesters bugs fixed:
- 00217 splndrbt: On boot the pcb displays a clean light blu screen while in mame there is a black road.
- 00220 splndrbt: Concerning the gfx, on the pcb the background is not linear as shown in mame.
- 00223 splndrbt: On the first level when you pass the asteroid belt the star road should be light blue instead of black like mam
- fixed champbas inputs
- merged talbot with champbas, some driver clenaup
- fixed shougi inputs
- switched exctsccb to use the correct gfx ROMs (matches screenshot found in 01058 exctsccb: Exciting soccer bootleg should be placed in champbas.c.)
- fixed sprite bpp in exctscrr, removed the horrible hacks that were used to fix colors and transparency.
- fixed sound clipping in exctsccr
refresh information from the device's inline_config, since this is
done before the screen devices are start. Fixes 01491: switchres
causes Exception at EIP=009413BF: ACCESS VIOLATION.
Also, fixed render_target_get_minimum_size() to return nominal values
if no screens are found.
Added DEVINFO_INT_TOKEN_BYTES, which is queried before device
startup. It should return the size of the structure that will
be hung off of device->token. It must not return 0.
Changed the core device interface to allocate and zero a block
of memory the size of DEVINFO_INT_TOKEN_BYTES before calling
device_start. The pointer to this memory is already attached
to device->token at the time device_start is called.
The primary motivation for this is to allow the device_start
function to make internal calls and pass the device_config *
around as if the object were fully constructed. Since the token
is used to indicate whether or not a device is live, this makes
the device "live" at the time device_start is called rather
than after it completes.
I applied the same fix to verifyroms. Now a status message is printed for every sample/ROM set regardless if an individual or all the sets are audited.
My fix is a bit heavy handed. The real access violation happens in update_digital_joysticks() after the comment "read all the associated ports" and before the next comment
Converted Centipede, as an example.
To define a scanline timer, use something like this:
MDRV_TIMER_ADD("32V", SCANLINE, generate_interrupt)
MDRV_TIMER_SCANLINE("main", 0, 16)
The first number is the first scanline the timer will fire on, the 2nd number is the increment.
So in this case, the timer will fire on 0, 16, 32, ..., 224, 240, then wrap around
because the screen is defined as 256 lines high.
The current scanline is passed to the callback in its 'param' argument
Subject: small fix to cpu.mak
Attached please find a small patch to include M68000 CPU only when you're
compiling a build with the M68K. this is needed to e.g. compile tiny
builds .
Subject: patch for SVP (Sega Virtua Processor) emulation
hello,
this patch adds support for Sega Virtua Processor, to run
Genesis/MegaDrive version of Virtua Racing, intended to be used by
MESS. It consists of a CPU core SSP1601, and updates in megadriv.c:
* SSP1601 replaces SSP1610, as it has been confirmed by Stiletto and
other sources that SVP actually contains SSP1601. The current SSP1610
is placeholder only (nearly completely unimplemented) anyway.
* Changes in megadriv.c add a new driver for Genesis/MegaDrive+SVP
combination, also add SVP memory controller logic and memory map.
The diff has already been reviewed by Reip and SSP1610 removal was one
of his suggestions (SSP1610 is not used by any drivers).
Attached is update for Merit hardware based on V9938 (CRT-250 and CRT-260 - meritm.c).
New playable games:
Pit Boss II
Super Pit Boss
Pit Boss Megastar
Megatouch IV
Megatouch IV Tournament Edition
Megatouch 6
Changed slapstic management to always install an opbase handler to more
aggressively catch code executing in the slapstic region. Updated all
drivers to separate the slapstic region of ROM into a different ROM
section from the fixed ROM.
Changed input ports to register a frame callback, which is
called immediately after throttling and updating. This is the
proper "sync point" between emulated time and real time. Moved
all analog and digital port processing into a central place
here. Added tracking of time since the previous frame update
and use that as an estimate for the time of the current frame.
This is used to scale analog ports without the use of
cpu_scalebyfcount(). This is not perfect in the case where
frame rates are dynamic (vector games), but works well for
other cases.
Further cleanup of memory header and code.
- Added video_screen_auto_bitmap_alloc(screen) -- it is just a shorthand for
auto_bitmap_alloc(video_screen_get_width(screen), video_screen_get_height(screen), video_screen_get_format(screen))
which is a common operation
- The Dynax/Don Den Lover games now do their updating in VIDEO_UPDATE instead of VIDEO_EOF. This semmed to
have fixed the palette problems
- Went through some of these drivers and changed Machine to machine
Made address versus byte offsets explicit throughout.
Removed some unused parameters.
Consolidated initialization process.
Removed maximum memory block count.
Centralized bank management.
Added masked handlers and change_pc to the accessors.
Added memory_get_accessors() to return a pointer to the accessors
for a given address space/databus width/endian configuration.
More to come.
MRA*_BANK*/MRA*_BANK* -> SMH_BANK*
MRA*_RAM/MRA*_ROM -> SMH_RAM
MRA*_ROM/MWA*_ROM -> SMH_ROM
MRA*_NOP/MWA*_NOP -> SMH_NOP
MRA*_UNMAP/MWA*_UNMAP -> SMH_UNMAP
This removes the silly need for a bunch of redundant constants
with faux type definitions that didn't buy anything.
Moved some memory system constants into memory.c.
Converted address maps to tokens. Changed the address_map structure
to house global map-wide information and hung a list of entries off
of it corresponding to each address range. Introduced new functions
address_map_alloc() and address_map_free() to build/destroy these
structures. Updated all code as necessary.
Fixed several instances of porttagtohandler*() in the address maps.
Drivers should use AM_READ_PORT() macros instead.
ADDRESS_MAP_EXTERN() now is required to specify the number of
databits, just like ADDRESS_MAP_START.
Removed ADDRESS_MAP_FLAGS() grossness. There are now three new macros
which replace its former usage. ADDRESS_MAP_GLOBAL_MASK(mask)
specifies a global address-space-wide mask on all addresses. Useful
for cases where one or more address lines simply are not used at
all. And ADDRESS_MAP_UNMAP_LOW/HIGH specifies the behavior of
unmapped reads (do they come back as 0 or ~0).
Changed internal memory mapping behavior to keep only a single
address map and store the byte-adjusted values next in the address
map entries rather than maintaining two separate maps. Many other
small internal changes/cleanups.
All callers that used 0 for the screen number now use machine->primary_screen
As a gap meassure, Where necessary, create a parallel set of video_screen_*_scrnum functions that take scrnum
All callers that specified a specific screen number now call the *_scrnum versions
Changed game info screen and overlay UI to display the screen tag instead of screen number
- Private state screen information now hangs off the public one, instead of the other way around
- Combines video_global and video_private into a single structure
The following shook out from this that are applicable to other devices as well:
- running_machine is no longer taken, passed or stored
- mc6845_t is now private
- since passing device_config's is not device type safe, I added a
get_safe_token() to mc6845.c to check the device passed in for the valid type.
I think something like this should be added to the core.
- As a side note, I really don't think that device_config is a good name,
naming it simply device_t or something like that might be better.
than tokens and individual bits to the device callbacks. Updated
all existing devices accordingly.
Removed machine from the parameters of some of the device_get_info
and device_set_info calls because that information is stored
with the device now.
* Change "Machine->" to "machine->" in AM_BASE_MEMBER, AM_SIZE_MEMBER
* Pass Machine in construct_address_map
This is not perfect yet, but there is no need any longer to include deprecat.h in drivers using AM_*_MEMBER.
Subject: Frequencies diff
Changed/verified clocks on the following pcbs: 1943, Arkanoid, Action
Holliwood GalsPanic, Ben Bero Beh, 1000 Miglia, Pit and Run, Prehistoric
Isle, Rastan, Hotmind, Hardtimes, Stagger1 and Tiger Road
Changed/verified Oki pin 7 on the following pcbs: 1000 miglia,
Galspanic, Action Holliwood, Hotmind, HardTimes, World Rally, Stagger1
Subject: "fix" for the "game information" resolutions.
Hi.
In 0.123u3 the bug "multiscreeninfo0123u2gre" was fixed, however it changed
its behaviour as it now shows the "default" resolution the driver uses
rather than the resolution the screen(s) actually use at the moment.
As I don't know if this change was intentional I've attached a simple diff
that changes from defstate.visarea to the real visible visarea.
Greets,
Ariane "SailorSat" Fugmann
which specify device read/write handlers in address maps, along
with the type/tag of the device they reference.
Converted MC6845 read/write handlers to READ/WRITE8_DEVICE_HANDLERs.
Updated all MC6845-using drivers to use the new macros and call
the updated functions. Removed the many little helper functions
that used to do this work.
Added validity checks to ensure that the devices referenced
actually exist.
Updated all call-through handlers appropriately. Renamed read8_handler to
read8_machine_func, replicating this pattern throughout.
Defined new set of memory handler functions which are similar but which
pass a const device_config * in place of the running_machine *. These are
called read8_device_func, etc. Added macros READ8_DEVICE_HANDLER() for
specifying functions of this type. Note that some plumbing still needs to
happen in memory.c before this will work.
This check-in should remove the need for the global Machine and in turn
"deprecat.h" for a lot of drivers, but that work has not been done. On
the flip side, some new accesses to the global Machine were added in the
emu/ files. These should be addressed over time, but are smaller in
number than the references in the driver.
Usage is very similar to PORT_CUSTOM. See the Astro Invader driver for an example
- Removed input_port_set_changed_callback and converted all users to PORT_CHANGED
The only difference between the old callback and the ones supplied by PORT_CHANGED is
that values passed by PORT_CHANGED are normalized to start at bit 0, just like
PORT_CUSTOM.
suffixed with _func. Did this throughout the core and
drivers I was familiar with.
Fixed gcc compiler error with recent render.c changes.
gcc does not like explicit (int) casts on float or
double functions. This is fracking annoying and stupid,
but there you have it.
video_screen_get_time_until_update().
Fixed CCPU and QB3 to no longer rely on cpu_scalebyfcount().
Fixed busted timing in the CCPU core. Changed watchdog to
count internally rather than using external watchdog support.
Altered CCPU to accept interrupt signals from the driver.
Updated clocks in the cinemat driver to be derived from the
clock crystal.
* Illustrates how to keep existing memory read/write handlers
This is slower than caching the device interface, but does not have an impact on
devices accessed at a low frequency like in this case.
* added ATTR_FORCE_INLINE to osdcomm.h
* added ATTR_NONNULL
* moved U64 S64 fram mamecore.h to osdcomm.h
* define SETJMP_GNUC_PROTECT() in osdcomm.h for use in ppc602, ppc603
- Added a video_screen_register_vbl_cb() function for registering VBLANK callbanks
- Changed inptport.c and debugcpu.c to make use the VBLANK callbacks
- Added video_screen_get_time_until_vblank_start()
- CCPU and anything using cpu_scalebyfcount() are currently broken
- I did some fairly extensive testing, but this is a very signficant internal change,
so some things may have broke
to use the macros.
Added the concept of device classes. Devices specify their class
in their get_info function. Classes can be used to walk through
devices at a more general level than their type. Functions have
been added to iterate through devices by class just as you can
by type.
Removed some unused fields from device_config.
- Since the Commodore 40xx computers program an HSYNC width that extends past the end of
the scanline, I am clamping it in lack of anything better to do.
- Define a new MDRV_CPU_VBLANK_INT_HACK() (ZV: defined in deprecat.h) which is a copy of the current MDRV_CPU_VBLANK_INT()
- Find all the places where VBLANK_INT is used with something other than 1 interrupt per frame and change it to the new macro
- Remove the "# per frame" parameter from the MDRV_SCREEN_VBLANK_INT() and add a screen tag in its place; updated all callers appropriately.
- ZV: Added some validation of the interrupt setup to validate.c
The idea behind this is that using a VBLANK interrupt with more than one interrupt per frame in conceptually wrong.
The screen tag will allow us to move the interrupt timing code from cpuexec.c to video.c, where it really belongs.
Subject: A fix for the z80pio
Hi there,
Here is a one-line fix for the z80pio.
At the moment when the interrupt control word is sent (with interrupts
enabled), an interrupt occurs. In reality, interrupts are disabled until
the interrupt mask byte is sent.
Subject: MPU4 Changes part 2
Right, I've added a bit of CTS pin checking logic, so that the status
flag is actually set when the pin changes state.
I've also simplified the MPU4 ACIA clock logic, but it's still not ideal
(Ideally, the ACIA should only run one transmit or receive event each
time the PTM O1 pin goes high, but that's not possible right now, so I
just set the clocks as close to off as I can when the pin is low, and to
something that approximates the distance between output state changes
when it's on). There's also a few more little cleanups based on
schematics and flyers from TAFA, and an emulation of the master reset
behaviour. Incidentally, if anyone wants to see just why this isn't
kicking into life now, by all means do, since there's nothing left that
I can see that it can get hung up on, other than the video chip, and the
aforementioned ACIA logic.
Subject: uPD7801, uPD78C05, and uPD78C06 cpu cores added to the uPD7810
cpu core
This patch adds basic support for the NEC uPD7801, uPD78C05, and
uPD78C06 cpus to the uPD7810 cpu core.
This fixes the ape sprite positioning in Crazy Kong -- no more gap between feet and platform
- Merged Yamato driver with Crazy Climber
- XX Mission tilemap conversion
- Removes VIDEO_START(generic) -- no longer used
constructors to tokenized lists. For the most part
this is a non-invasive change, except for those drivers
using MDRV_WATCHDOG_TIME_INIT. In order to allow for
tokenization of attotimes, a set of new macros is
provided called UINT64_ATTOTIME_IN_x() which follows the
same pattern as ATTOTIME_IN_x() but packs the attotime
down into a single 64-bit value for easier tokenization.
Separated MDRV_DEVICE_CONFIG_DATA into 32-bit and 64-bit
versions. Added floating-point versions with configurable
resolutions.
Fixed several errors in the machine drivers which were
caught by the additional checks now done in the machine
config detokenization code.
Converted speakers into devices. Machine->config no
longer houses an array of speakers; instead they are
iterated through using the new macros (defined in sound.h)
speaker_output_first() and speaker_output_next(). Updated
all relevant code to do this.
Improved game info display with multiple screens. Fixed
bug which caused all screens to display equally.
Added typedefs for all the machine config callback
functions at the top of driver.h.
* flip_screen_x and flip_screen_y made static
* add flip_screen_x_get() and flip_screen_y_get()
* change writes to flip_screen_x from last commit to flip_screen_set_no_update()
* added save state calls for flip_screen_x and flip_screen_y
* add "int flip_screen_get(void)"
* define flip_screen flip_screen_get()
* clean up drivers with collisions
* mark write accesses to flip_screen_x with FIXME
tokenizing data structures, as currently used by the input
port system. Redid the input port tokenization to be more
compact and make use of the new macros.
- I still left drawgfx.c as is, the only piece of code that used any of the functions in drawgfx
was s2636.c -- everything else uses 8-bit bitmaps as a replacement for a two dimensional array
- Moved some variable declerations so that they are only visible where they are actually used
Note that the diff is large only because I removed a level of indentation from a huge chunk of code.
I could do that because the case it was checking for was already caught by one of the asserts added.
* verinfo: New syntax.
verinfo now uses the following syntax: verinfo.exe -b windows|winui|mess.
Does not depend on compile time defines any longer.
* makefile will include - if it exists - src/osd/$(CROSS_BUILD_OSD)/build.mak.
This was necessary to enable cross builds for winui. winui adds mkhelp to build tools and the rules for mkhelp thus had to be moved outside src/osd/winui/winui.mak
* Tested on Linux 64bit, Linux 32bit, Windows 32bit mingw, Windows 32bit MSVC
* Cross build environment to be posted to the list
ALL DRIVERS MUST NOW EXPLICITLY DECLARE THEIR SCREENS.
Read on for more detail....
Added device tag as a parameter to the start function for devices.
Updated MC6845 to accept this tag.
Added new functions for iterating through the device list and
counting devices of a given type. Updated search and iteration
functions to accept DEVICE_TYPE_WILDCARD to work across all
devices.
Added new macro MDRV_DEVICE_CONFIG_DATA() which is used to set a
single item in an inline data structure.
Removed the per-screen palette_base. This was an idea that never
really worked out, nor have we really needed it.
Defined a new device type VIDEO_SCREEN. Currently this has no
live functionality, but merely serves as a placeholder/identifier
for video screens. Eventually some of the screen management code
may move into the start/stop/reset functions.
Changed MDRV_SCREEN_* macros to build up VIDEO_SCREEN devices
rather than storing values in the screen[] array.
Changed MDRV_SCREEN_ADD to specify a screen type (RASTER, VECTOR,
LCD for the moment).
Removed the older VIDEO_TYPE_RASTER and VIDEO_TYPE_VECTOR; this
information is now determined by walking the screen list.
Removed the screen[] array from machine_config. Modified all code
referencing Machine->config->screen[] and changed it to iterate
over the devices using the new video_screen_first() and
video_screen_next() functions.
(The next step will be to add video_* functions that accept a tag
instead of screen index, and then move systems over to always
referencing screens by tag instead of index.)
Removed implicit screen #0. This means that ALL DRIVERS MUST
EXPLICITLY DECLARE THEIR SCREENS. Updated all drivers to do
so. While there, grouped all MDRV_SCREEN_* parameters together.
Also removed unnecessary VIDEO_TYPE_RASTER and VIDEO_TYPE_VECTOR.
Also removed VBLANK and bitmap format information from vector
games. This was painful and very tedious.
Changed game information to display info about all screens.
* PALETTE_INIT no longer has a colortable parameter
* removed game_colortable and remapped_colortable from machine_config
* updated a few stragglers that still referenced these fields
* removed tile_draw_colortable from tilemap.c
(From Zsolt): Added support for the new colortable object in the palette viewer
Changed the input port tokens to use a union instead of casting everything to FPTR.
In the future, C99-enabled compilers will be able to achieve type safety with
designated initializers.
Subject: _mul_32x32_hi() and _mulu_32x32_hi() patch
Hi/2.
I've attached patches to fix validation fail of '_mul_32x32_hi()' and
'_mulu_32x32_hi()' inline function when compiled GCC v3.3.5 with I686
optimization in according to advice of 'Vas Crabb'
Subject: Various little changes from the last month
I've been meaning to send these in for ages, but the day job has been
insane for a while now, so it's been hard to keep these up to date.
Firstly, I've fixed a few corner cases I've noticed in the 6840
emulation based on running the MPU4 test ROMs, and added the ability to
dynamically alter the external clock frequencies in game (since these
pins can be connected to other timing devices in a daisy chain, this may
well prove handy for speech chips and the like).
The 6850 core has also been changed to allow dynamic RX and TX clock
alteration, to at least try to remove a few of the MPU4 timing problems
(the ACIA clocks are triggered by the output pin of one of the 6840
timers, so the clock rate will vary according to what has been
programmed into the counter, rather than a fixed value).
MPU4 has been changed to document the Video board a bit better, and to
change a game name to match what is actually on the marquee. Other names
have changed, to better describe the program nature (AMLD versions are
legally speaking not SWPs, as there is no capacity for payout, so AMLD
SWP is an oxymoron).
Lastly, since I was smoketesting 6840ptm using cchasm anyway, I've added
some documentation of the Cosmic Chasm crystals, and merged the memory
maps.
to the sound and CPU interfaces. This is still a bit WIP, but works at
a fundamental level. Currently the only example of usage is in qix.c for
the MC6845 CRTC.
New module: mconfig.c/.h. Moved all machine_config and MDRV_* macros here,
out of driver.c/.h. Added MDRV macros for adding/removing/configuring
devices.
qix.c: Moved video part of machine driver to video/qix.c. Added MC6845
as a device in the machine driver. Removed explicit MC6845 initialization
from VIDEO_START in favor of simply retrieving the token from the device
interface code.
mc6845.c: Updated all callbacks to pass the mc6845_t * object. Updated
all drivers accordingly. Added a minimal device interface.
Deprecated the following constants because global constants that pretend
to document things but which are only guesses are dumb:
- DEFAULT_60HZ_VBLANK_DURATION
- DEFAULT_30HZ_VBLANK_DURATION
- DEFAULT_REAL_60HZ_VBLANK_DURATION
- DEFAULT_REAL_30HZ_VBLANK_DURATION
- DEFAULT_60HZ_3S_VBLANK_WATCHDOG
- DEFAULT_30HZ_3S_VBLANK_WATCHDOG
Updated all drivers to explicitly specify the equivalent bogus times.
Added comments for the "REAL" VBLANK durations to indicate that they are
not accurate.
Hi mamedev,
Here's my periodic batch of code cleanups. The usual batch of adding static/const plus some include fixes. In addition, I reverted some of the changes to build.mak from u1 which made some MSVC builds fail, and adjusted/optimized an m10.c gfx_layout. I also added some missing cores to cpuintrf.c, sndintrf.c and added some missing #if's to 5220intf.c.
~aa
Since it's an SCSPx2 with ADPCM instead of FM it's already feature-complete except filter envelopes.
A bug in the ARM7 core causes incorrect pan/level values to be computed in e.g. the Naomi SOUND TEST menu (I've also been seeing this in DSF playback). This is not a defect in the AICA.
Please credit ElSemi, Deunan Knute, kingshriek, and myself.
moved decryption table setup to 'config' struct for the CPU.
added latest tables from robiza, making Risky Challenge playable, promoted it to working
told CPU core to not decrypt code after brkn instruction, enabling it again on iret, allowing me to remove several 'don't decrypt range' hacks in robiza's code.
updated all drivers accordingly.
currently the disassembly is a bit weird now, this will need looking at.
Samuele Zannoli:
- Add SH4 I/O ports
- Connected the 93C46 of the naomi and the x76f100 of the rom board and filled them with dummy data to satisfy the BIOS
- Implemented some of the JVS transfers that will be needed to use the controls
- Implemented ROM board DMA
- Set proper NAOMI RAM sizes (32 MB main, 8 MB for AICA)
- Improved PVR-TA graphics emulation
Deunan Knute:
- Set proper ARM7 clock. (Yes, it's really that slow!)
Subject: [patch] CPU/SOUND independence fixes
Hi mamedev,
Here's some updates to the CPU/SOUND cores to improve build
independence. While I was at it, I rescued the M65CE02 core from
bitrot hell (perhaps m65ce02.[ch] should just be deleted), and fixed
some MESS cores that were broken by the deprecat.h changes.
Subject: Frequencies verifications
I corrected the clocks on the following pcbs: Formation Z, MagMax,
SlapFight and Tiger Heli
Changed Oki m6295 pin 7 to "high" on Toki and Blood Bros
pool_object_add (via src/emu/debug/debugcmt.c:107): Attempted to add a NULL object of size 0
This was happening when mame_debug_init was being called with 0 CPUs (eg. when starting MAME from the command line without a ROMset specified).
Subject: [patch] Fix some comments
Hi mamedev,
The following patch updates the initialization comments at the top of
mame.c and corrects/adds a few filename declarations at the top of a
handful of files.
~aa
Added AM_WRITEONLY as a shortcut for AM_WRITE(MWAx_RAM).
Cleaned up Kangaroo driver:
* documented MB8841 (needs to be decapped to get code)
* proper video timing
* full memory maps
* simplified and more accurate video logic
- Added some instructions to the H8/30xx CPU:
or.l ERs, ERd
rotl/shal.l ERd
not.l/neg.l ERd
exts.w Rd
sub/or/xor.l #Imm:32, ERd
bset/bnot/bclr.b Rn, @ERd
bst/bist.b #Imm:3, @ERd
bnot.b #Imm:3, @ERd
- Added H8/3007 & H8/3044 variants with their memory maps.
Preliminary implementation of the H8/3007 timers.
(a make clean is required)
P.S.
I've moved the docs we have in docs/cpu/H8-30xx and added a couple more.
Roms are in roms/current/p/puzzlet.zip
a new compile-time define (ENABLE_DEBUGGER). This means that MAME_DEBUG no longer means
"enable debugger", it simply enables debugging features such as assertions and debug code
in drivers.
Also removed the various levels of opbase protection in memory.h and always just turned
on full bounds checking.
Fixed build break due to missing ampoker.lay -> ampoker2.lay renaming.
Added #include "deprecat.h" where necessary to make this happen.
Cleaned up cpuexec.c/.h to latest core style.
Cleaned up implementation of extended INP header in inptport.c.
Removed external access to cycles_currently_ran().
Replaced use of cycles_currently_ran() in v9938 code with mame_rand(), since that is effectively the same thing. :)
Subject: AGEMAME upstream patches for u8/0.123
I thought I'd push a few minor coding improvements in now, while I still
have something resembling free time.
Firstly, I've made a few changes to the 6840 interrupt handling, to be
more like that in the 6821 driver, and to hopefully reduce the IRQ
swamping that could occur using the old setup. In the process, I've
added the 6840 IRQ handler to the wire-OR in the MPU4 driver, as that's
what the schematic shows (there's just one track for each interrupt
class, all the way down the PCB to the cartridge loading point). Since I
was looking at that, I made MPU4 games that didn't use a CRT as
screenless as they can get at present, and altered the logging options
to avoid a redefinition issue if you wanted the core and driver portions
to log at different levels.
Scorpion 2 has also been altered to match the MPU4 coding style, where
proper handlers re now included for the stepper motor data, which can
then be expanded on in AGEMAME.
* full memory maps
* partial machine driver removes need for replicating filtering logic
* updated all relevant drivers
Cleaned up Time Pilot and Tutankham drivers:
* correct clocks where possible
* merged memory maps
* fully decoded memory maps
* replaced hacky sprite rendering in Time Pilot with partial updates
* save state support
* removed Power Surge kludge, replaced with unmapped handler control
* Tutankham runs at 60fps, with IRQs every other frame
* Proper IRQ ack in Tutankham
longer used. Source needs to be recompiled because of the changed enum.
- Changed copybitmap and copyscrollbitmap:
There are now 2 versions of each, one without and with transparency:
void copybitmap(mame_bitmap *dest,mame_bitmap *src,int flipx,int flipy, int sx,int sy,const rectangle *clip);
void copybitmap_trans(mame_bitmap *dest,mame_bitmap *src,int flipx,int flipy, int sx,int sy,const rectangle *clip, pen_t transparent_pen);
void copyscrollbitmap(mame_bitmap *dest,mame_bitmap *src, nt rows,const int *rowscroll,int cols,const int *colscroll, const rectangle *clip);
void copyscrollbitmap_trans(mame_bitmap *dest,mame_bitmap *src, int rows,const int *rowscroll,int cols,const int *colscroll, const rectangle *clip, pen_t transparent_pen);
The version without _trans is the equivalent of the old TRANSPARENCY_NONE, The *_trans version is the equivalent
of the old TRANSPARENCY_PEN. The old TRANSPARENCY_COLOR mode is done via calling *_trans version and passing in
the pen that has been looked up via machine->pens[].
So for example, copybitmap(..., TRANSPARENCY_COLOR, 0) becomes
copybitmap_trans(..., machine->pens[0])
- Changed all drivers to the new calls. Suprising how few drivers still use these functions.
Most have still not been converted to tilemaps, or they are still writing to a tmpbitmap
which gets copied over to the real bitmap in VIDEO_UPDATE.
- Changed machine->screen[0].visarea to 'cliprect' where appropriate.
The idea is to create extra work if a driver wants to use these and hopefully
gives an incentive to look for an alternate solution
- Added #include of deprecat.h that rely on these contructs
- Removed a bunch of unneccassary #include's from these files
Subject: z80gb cpu core patch
Changes:
- Small timing fixes when leaving HALT state.
- Fixed bug in retrieving Z80GB_SPEED pseudo register.
--
From: Wilbert Pol [mailto:wilbert@jdg.info]
Subject: Re: timer_set_global_time patch
This patch for the z80gb cpu core also fixes my problems without the
need to recode a lot of things:
- Split the execution of an instruction into separate fetch and
execute phase.
Subject: other frequencies verified
Corrected Diet gogo h6280 clock so that it behaves correctly with
Charles Macdonald fix to the cpu core.
Verified anc corrected frequencies and pin 7 okim6295 on the following
games:
The new zealand story (3 z80 version), Trio The punch, Vandyke,
paradise.c games, Downtown, Shaolin's Road and Twins.
Updated Xtal.h with 1.056mhz resonator from Trio the punch
Subject: [patch] Fix C4305 warnings, other MSVC tweaks
Hi mamedev,
This patch is a bit of a potpourri. It is the result of enabling most
of the suppressed warnings when using MSVC compilers and seeing what
issues arose with different compilers (I used 70,71,80,90). Two of
the warnings were judged to be useful to enable and methodically fix.
Some issues spotted by the other warnings were also fixed.
1. Fixed issues flagged by MSVC warning C4305 (type truncation).
Almost all of these are harmless double->float narrowing in
initializers, but one warning spotlighted a bug in segasyse.c, where
code to use a higher sprite number had no effect due to the
insufficient range of UINT8.
2. Removed /wd4550 for VS7/VS71 compilers (expression evaluates to a
function which is missing an argument list). There are no cases of
this warning currently, and if there were they would most certainly be
bugs. This also allowed the warning suppression lists to be remerged
for VS7 and VS2005.
3. Decoupled intrinsic support decisions from PTR64 in eivc.h.
4. Fixed some VS7-specific issues (OPTIMIZE=0 at least compiles now).
That compiler doesn't support "long long" or "ll" (rsp.c/dkong.c).
5. Added a missing case statement in sm8500d.c. Noticed while
reviewing dead code warnings.
6. Replaced a number of static constants with an enum in sidenvel.h.
This is unrelated to the rest of this patch, but it was overdue to be
done.
- Changed the Berzerk driver to set the S14001A clock as per the schematics. This proves that the schematics are correct and the comment suggesting the contrary can be removed.
- Final pass on single-stepping behavior [SGINut]
- Corrected VRCP element lookup [SGINut]
- Corrected unaligned DMA behavior [Ville Linde] (Ville, do you mind that I submit this?)
- cleaned up and merged ninjakd2, mnight and omegaf drivers into a single driver
- added flip screen support to all games
- fixed sprite overdraw mode:
- ninjakd2 congratulations screen (e.g. stage 3) shows japanese characters which were previously missing
- in ninjakd2, at the beginning of a level items are visible during the initial fade in. I'm not sure if this is correct but the other effects wouldn't work otherwise
- in mnight attract mode, when the big ship is firing the other sprites no longer leave trails
- in mnight at the end of a level the screen is slowly filled with balls and then slowly cleared to begin the following level. Same effect in the death sequence during attract mode.
- added proper computation of sprites to be drawn taking into account double size sprites. This fixes sticking shots in mnight without need for a hack.
- lowered ninjakd2 PCM playback rate to 13020 (from 16000). This seems to sound better and is a round division from one of the master clocks.
- removed ROM patch that was used to avoid the input protection in omegaf, added a rough but effective protection simulation.
- corrected some dip switches
- hooked up sound cpu reset line
- simplified ROM loading for the older games swizzling address lines in driver init.
> This one line fix addresses the crash reported in newui0118u4ora. I
> think most of the other issues reported in the bug are fixed by this
> as well, but I didn't test this thoroughly. Perhaps we should close
> the bug and have the testers file a new bug if remaining issues are
> found.
Updated drivers accordingly.
Major cleanup to the ddragon driver:
- improved video and interrupt timing
- consolidated common memory maps and input ports
- added save state support
- correct clocks
Previous checks would not catch modifications in DRIVER_INIT or MACHINE_START calls.
Also changed one of the cheat calls back to using more generic switch detection so they can be triggered via joysticks.
Changes:
- Re-fixed RSP single-step activation behavior
- Reading the RSP PC returns only the least significant 12 bits
- Fixed flag behavior when read out via CFC2
Oh God, why Nintendo, why? Why make the RSP immediately stop when the main CPU sets single-stepping, but have the RSP execute one instruction before entering single-stepping mode when it sets it on itself? "You manaics! Damn you! God damn you all to hell!"
Changes:
- Initialize RSP registers to 0 in lieu of mame_rand
- Re-fix RSP single-stepping mode when set by a CPU other than the RSP
* 8085 has an internal clock divider by 2. Changed i8085.c to reflect this for I8085. I8080 still at 1.
Games using I8085:
* Changed clock to reflect internal clock divider now in i8085.c
* Added some FIXME: comments where clocks for I8085 are outside specs
Quite possibly the most useless RSP change I'll ever make, given that no game should ever be affected by these changes. But, eh, accuracy. Apparently only the accumulator registers are initialized to a non-random value on power-on, and apparently the RSP executes exactly one instruction before kicking over into single-step mode when it's set in the status register.
- Fixed accumulator state on powerup by testing against real hardware
- Fixed single-step behavior by testing against real hardware
The system 10 & 12 clock speeds have been raised as they run on an upgraded chipset.
All clocks are currently set to divide by 2 externally, I don't know if this is correct.
The clock is also divided internally as we have no wait states, incorrect dma timing, no gpu timing, no dma bus stealing and no gte timing.
Verified and changed cpu frequencies and oki m6295 pin 7 on the
following pcbs:
Asuka&Asuka, Cadash, Equites h/w games and sound board, F1GP, Super
Formula, Gladiator, Ping Pong king, Great Swordsman, Irem m52 sound
board, Tropical Angel, Explosive Breakers, Magical Crystal, Mad Gear,
Roller Aces, Chinese Hero, Simpsons, Golfing Greats, Time Pilot 84.
Updated Xtal.h to use new OSC values found on Great swordman, Gladiator
h/w and Equites sound board.
Updated informations in Equites.c for the sound board
- Removed videoram_w, colorram_w and spriteram_w and changed all drivers using it to access RAM directly. Still kept the _r function as some old style drivers are relying on them for mirroring support. Will investigate and address those next
Updated all CPU cores to return a CPUINFO_INT_CLOCK_MULTIPLIER of 1.
Changed the core to actually respect both CPUINFO_INT_CLOCK_MULTIPLIER and CPUINFO_INT_CLOCK_DIVIDER.
Updated a number of drivers to use cpunum_get_clock() instead of Machine->drv->cpu[x].clock.
***** Raw input clock speeds should now be specified for all CPUs in the MACHINE_DRIVER. *****
Removed explicit divisors from all drivers using the following CPU types,
which were already specifying non-1 values for CPUINFO_INT_CLOCK_DIVIDER:
* COP4x0
* I8039/8048 families
* M68(7)05, HD63705
* M6809E
* PIC16C5X
* TMS32010
* TMS340x0
In a few cases, it appears that the divisor was not being used, so I guessed in those cases whether or not
the specified clock speed was raw.
src/mame/audio/berzerk.c
- Added sh_reset
src/mame/audio/exidy.c
src/mame/includes/exidy.h
- Added reset functionality
- Moved Victory hardware routines here
src/mame/drivers/victory.c
- Some clean-up, mirrored memory map for audio CPU
src/mame/video/victory.c
- Simplified code by removing complicated
dirty tracking. Now VIDEO_UPDATE is
called on every frame, further simplifing
code
src/mame/drivers/exidy.c
- Mirrored memory map for audio CPU
- Added sh_reset
src/emu/machine/6821pia.c
src/emu/machine/6821pia.h
- Added orthogonal accessors
- Removed hacky update_shared_irq_handler(), now the same
IRQ callback maybe called multiple times, but this shouldn't
be a problem
- IRQ lines are cleared on a reset
src/emu/sound/tms5220.c
- Disabled code that set the Buffer Empty flag after a stop
frame. This fixes Victory. This might be the incorrect fix
but the old code wasn't working either.
Cleaned up jaguar driver:
* proper video timing, configured by the chipset
* 32-bit rendering, removing 16bpp hacks
* support for borders
* proper object processor timing, including multiple passes per line
* added R3041 as a clone of the R3000
* fixed XTALs based on documentation
* fixed movd instructions
* add MB8884 and M58715 cpu types
* moved timer hack to M58715
* added ram_mask for internal ram access
* added R.A11 as 'M' to dasm flags
* added EA "IO" port
* mario now uses M58715 as sound cpu
Here's a patch that fixes compile errors when compiling a C++ source file including "render.h"
and "palette.h". C++ (at least g++) does not like typedef's for an enum coming before the actual enum.
While investigating alternate gfx layout schemes, I stumbled across
the fact that some drivers are allocating graphics with one layout and
then decoding them with another (!). There's no guarantee this will
work, but for the drivers that do so (all Konami games), the layouts
are similar enough that it does. A related potential bug is that many
drivers are decoding using the layout provided to allocgfx, not the
layout attached the element returned from allocgfx. If the element
had scaling applied to it, this would be incorrect, but since scaling
is rare these are also benign. It would also be a problem if the
layout data had a different internal representation (which is
something I'm experimenting with), so to reduce the possibility of
coding errors and allow for future changes, I'd like to remove the
layout parameter from decodechar.
So here's two patches, the first fixes the affected Konami drivers to
allocate and decode using the same layouts. It changes the notion of
plane_order and bpp in the functions somewhat to let the start
routines select the appropriate layout, but acceptably so IMHO (I can
clean this up further if there are loud objections). The second patch
then removes the layout parameter from all the decodechar() calls.
I also reviewed MESS to see if it had similar problems and didn't find
any.
Changed and verified frequencies on Ikari Warriors h/w, Tnk3, Hyper Sports, Jackal and S.A.R
Updated xtal.h to support the 13.4mhz crystal found on Ikari warriors and TNK3 h/w
Verified and corrected a lot of frequencies and oki6295 pin 7 on pcbs:
Double Dribble, Chequered Flag, Diet gogo, Boulderdash, Sly Spy, Psycho
Nics Oscar, Captain Silver, Magical Cat Adventure, Raiden, Superman,
Twin Hawk, Vimana, Ghox, Dogyunn, truxton2, Pipi and Bibis, Fix Eight
and Money Money
They were all verified with frequency counter, even the strangest ones
are right.
Cleaned up atarijsa memory maps.
Added save state support to atarirle, and cleaned it up a bit.
Added save state support to atarig1 driver.
Fixed pitfight0109u2gre
Removed hack in setting the timer in the MIPS core, which caused missed timers on the aleck64 games.
Fixed icount management in the RSP core which caused it to report negative cycle counts.
Fixes aleck64_0120red and mtetrisc0115u1red.
This patch fixes the following issue in the 6522 emulation:
- When writing to the ACR register with the timer 1 in continuous
counting mode, the timer 1 value should not be reloaded but keep on
counting.
This fixes the winwork.c and poly(new).c meory leaks in the viper.c
driver. I didn't look at the x86drc.c, because Aaron said it will be
changed soon and there is no need to investigate those leaks at all.
As I wanted to update my own personal TODO about that fix I
recognised it only happens in viper.c as well, so I took a stab at
it. It was just anothe rmissing cleanup function and I also cleaned
up the *_exit() potions/usage of the cores supporting DRC a bit.
0. This patch does minor cleanup to existing layouts, trimming/padding
entries as appropriate and reformating a few layouts.
1. This patch introduces a GFXLAYOUT_RAW() macro, and uses it
throughout. It codifies the requirements for a raw layout in one
place.
2. This patch adds new validation code to the core for some previously
unchecked assumptions about layouts, and reduces the number of
references to the gfx_layout fields in preparation for a change in the
representation.
3. This patch constifies the remaining non-const gfx_layouts in MAME.
It does this by adjusting the code so that the only modification to a
layout ever needed is for the total field, which is then handled by
modifying a stack-based copy of the layout before invoking allocgfx. I
also spent some time consolidating and simplifying the layout code in
konamiic.c.
- removed years from copyright notices
- removed redundant (c) from copyright notices
- updated "the MAME Team" to be "Nicola Salmoria and the MAME Team"
Added save state support to YM2413.
Modified slapstic code to support address range mirrors.
Cleaned up Rampart driver:
- simplified rendering code
- full memory map
- added save state
beastrzb097u2red.patch
- added GAME_NOT_WORKING flag, so this bogus bug report can be
removed (not even worth 1 buck!)
20080104_1.patch
- fixes a memory in src/mame/machine/stvcd.c
memoryleak0118u1ora.patch
- fixes a memory leak, that only happened when no RawInput API was
available
memory_leak0111u6ora_1.patch
- only a partial patch - model3.c still missing
* XTAL-based timing
* Correct video timing
* Full memory map
* Correct memory usage ("zero page" RAM is shared with videoram)
* Removed all input hacks
* Fixed interrupt generation
* Connected coin counters
* Added save state support
Also fixed incorrect dependency in cdrom.c.
This is an updated version of my earlier ATTR_PRINTF patch. It was
reviewed by Atari Ace to use ATTR_PRINTF properly and fixes even more
format errors. I also reviewed the whole source again and it is now
used in all possible places.
Removed ui_popup(). Drivers should always be using popmessage() instead (has been this way for a while).
Augmented popmessage() so that you can pass NULL to immediately dismiss any messages.
* fixed interrupt handling
* added support for edge-triggered interrupts on '32
* expanded interrupt support for the '32
* updated drivers using TMS3203x core to deassert interrupts
* added externally accessible functions for converting '3x floating point format
* updated gaelco3d driver to use new functions
Zeus2 (+related) updates:
* fixed save states for DCS games
* cleaned up Zeus2 waveram handling
* added Zeus2 save state support
* added preliminary model and quad rendering support for Zeus2
* added support to timekpr for the ZPRAM used on Zeus2
* hooked up ZPRAM in Zeus2 games
* hooked up controls in Zeus2 games
* updated poly.c to ensure it is idle before saving state
The attached patch adjusts most conditional logging in MAME to use the
idiom "do { if (VERBOSE) logerror x; } while (0)". This has the
benefit that the compiler checks the syntax of the logging even in the
case it will be eliminated, and in fact a number of cases here needed
adjustments to compile because of this.
Here is a fix I've done to the Z80 CPU core that removes the increasing
of the R register from each IX/IY related (FD xx or DD xx) instruction.
This corrects the amount the R register should increased to to 2,
instead of 3. Documentation I've read suggests that the R register is
increased by 1 for each instruction with no prefix, and by 2 for each
instruction with a prefix (DD, FD, ED, CB, DD CB and FD CB). This fixes
some protected cassette loaders in the MESS Amstrad CPC driver, and
maybe others, which require the R register to be correct for the next
routine to be decoded correctly. I'd doubt that there is much, if any,
noticeable impact for MAME, as the R register is really only useful to a
program as a simple random number generator (or seed).
I've tested the fix with Pacman, in MAME, and when it comes across a LD
IX,xxxx or ADD IX,xx it will increase R by 2, whereas previously, it
increased R by 3.
Added artifical Z offset of -2 to make the full screen show in crusnexo.
Really fixed TMS3203x interrupt handling.
Added hack to catch invalid SP values during 32031 execution (debug mode only).
* fixed interrupt handling
* added support for edge-triggered interrupts on '32
* expanded interrupt support for the '32
* updated drivers using TMS3203x core to deassert interrupts
* added externally accessible functions for converting '3x floating point format
* updated gaelco3d driver to use new functions
Zeus2 (+related) updates:
* fixed save states for DCS games
* cleaned up Zeus2 waveram handling
* added Zeus2 save state support
* added preliminary model and quad rendering support for Zeus2
* added support to timekpr for the ZPRAM used on Zeus2
* hooked up ZPRAM in Zeus2 games
* hooked up controls in Zeus2 games
* updated poly.c to ensure it is idle before saving state
This patch should complete the addition of static qualifiers to all
MAME symbols that aren't explicitly exported. It primarily handles
generated code (e.g. amspdwy.c), plus a handful of cases I'd
previously missed and some new cases introduced in the last update.
One interesting bit was the discovery that the 32-bit scanline
routines in drawgfx.c are unused. I debated eliminating them but
decided instead to just export them. Various internal drawgfx
functions were conditionally removed by examining a new RAW define,
although one routine (blockmove_8toN_alphaone) was determined to be
dead code.
While investigating constifying MESS, I came across a few core APIs
that were missing const qualifiers which this patch fixes. I also
consted up tx1.c while I was at it.
- cvs games: according to PCBInfos speech chip is TMS5100.
Changed driver to use TMS5100 and "game system operational" now sounds more natural
- removed sound/m58817.*
- added support for multiple coefficients maps to tms5110.*
- added coefficient maps for TMS5100 and M58817 from documented sources to tms5110r.c
- fixed interpolation factors (see tms5110r.c for reason)
- made lattice calculation precision 9bit
- added support for READBIT and LOADADDRESS commands to tms5110.c
- more changes in line with various patents
This small patch makes some minor "code quality" improvements to MAME.
First off, some remaing static/const qualifier missed cases were
addressed. Secondly, a few cases of missing #include "foo.h" were
added. Thirdly, a few global names were modified to make them less
generic/more consistent (voodoo.c, vrender0.c, lethal.c, rungun.c,
zac2650.c). Fourthly, some dead/useless code was removed
(i8051.c,model1.c,romcmp.c).
* Cleaned up zeus wave RAM accessors.
* Changed rendering code to allow for greater parallelism on multicore systems.
* Removed some vestigial zeus 2 hacks.
* Reduced visible area to remove artifacts.
* Made right/bottom vertices inclusive to fix some gapping issues.
* Fixed invasn lightgun offset.
* Marked invasn as playable.
Zeus 2 hardware:
* Fixed ROM loading, added banking support.
* Separated zeus 2 video implementation from zeus implementation.
* Implemented direct pixel accesses; enough to get startup screens to show.
ADSP-2100:
* Properly documented ADSP-2104 internal memory map.
