/*************************************************************************** commodore pet series computer PeT mess@utanet.at documentation vice emulator www.funet.fi andre fachat (vice emulator, docu, web site, excellent keyboard pictures) ***************************************************************************/ /* 2008 - Driver Updates --------------------- (most of the informations are taken from http://www.zimmers.net/cbmpics/ ) (also, check http://www.6502.org/users/andre/petindex/local/cbm-model-list.1.0.txt for a more comprehensive list of models) [CBM systems which belong to this driver] * Commodore PET 2001 (1977) - board design 1 * PET 2001 Series / CBM 20XX Series (1979) - board design 2, upgraded ROMs PET 2001, the first of the series came initially with a calculator style keyboard, later changed to a larger and better full-stroke one (actually it was available in two versions: Businness and Home Computer, the latter also containing graphics on the keys). Plenty of models were released in this series, depending on the RAM size, the keyboard type and the screen dimension (see below). CPU: MOS 6502 (1 MHz) RAM: 4K and 8K early models (Expandable to 32k addressable, more banked); 8K, 16K, 32K later models (Expandable again to larger RAM config) ROM: 18 kilobytes early models; 20 kilobytes later ones Video: MOS Technology 6545 CRTC (9" Monochrome display; 40 columns x 25 rows ) Sound: None ine arlier models; Piezo electronic speaker later ones(One square wave voice; Three octaves) Ports: MOS 6520 PIA, MOS 6522 VIA (IEEE-488 edge-connector Port; 2 Commodore Datasette ports; 'EXPANSION' port; CBM parallel programmable "User" port Keyboard: "Calculator" 69 key QWERTY in early models and Full 69 keys QWERTY in later ones (16 key numeric keypad!; 4 direction 2-key cursor-pad ) Additional hardware: Datasette Model Table (*): PET 2001-4K Calculator Keyboard, Black Trim PET 2001-8K Calculator Keyboard, Blue Trim, 9" Screen PET 2001-8C Calculator Keyboard, Blue Trim, 9" Screen B&W (**) PET 2001B-8 Business Keyboard, 12" Screen PET 2001B-16 Business Keyboard, 12" Screen PET 2001B-32 Business Keyboard, 12" Screen (***) PET 2001N-8 Home Computer Keyboard, 12" Screen PET 2001N-16 Home Computer Keyboard, 9" and 12" Screen PET 2001N-32 Home Computer Keyboard, BASIC 4.0 Notes: B&W = Black and White Screen G&W = Green and White Screen Calculator Keyboard models also had a built-in datasette Home Computer Keyboard also features graphics on keys (*) Models 2001B-XX & 2001-XXB are the same. Same applies to 2001N-XX & 2001-XXN (**) Also confirmed with Black Trim and 9" Screen G&W (***) Also confirmed with Black Trim and 9" Screen B&W * Commodore CBM 3008 / 3016 / 3032 (1979) - board design 2, upgraded ROMs In Europe, Philips was already selling a machine called PET, so they forced Commodore to change name. The result was the CBM 30XX Series, where XX is equal to the RAM size. These were basically PET models with 9" Screen and upgraded ROMs. There also existed a German CBM 3001, which was a PET 2001, B or N. Notice that these systems used to boot CPU: MOS 6502 (1MHz) RAM: 8K, 16k, and 32k models (Expandable to even more banked memory) ROM: 20 Kilobytes Video: MOS Technology 6545 CRTC (9" Monochrome display; 40 columns x 25 rows) Sound: Piezo electronic speaker (One square wave voice; Three octaves) Ports: MOS 6520 PIA, MOS 6522 VIA (IEEE-488 edge-connector Port; 2 Commodore Datasette ports; 'EXPANSION' port; CBM parallel programmable "User" port) Keyboard: Full 69 key QWERTY (16 key numeric keypad!; 4 direction 2-key cursor-pad) * Commodore PET 40XX / CBM 40XX (1980) - board design 2, BASIC 4, 9" Screen * Commodore PET 40XX / CBM 40XX (1981) - board design 3, BASIC 4, 12" Screen While the 40XX machines (again 4008, 4016, 4032) coming with design 2 were quite similar to the previous ones (except for the new BASIC version), the machines with design 3 were quite different: there was CRTC support, it was possible to upgrade to 80 cols and a piezo beeper. CPU: MOS 6502 (1 MHz) RAM: 8K, 16k, and 32k models (Expandable to even more banked memory) ROM: 20 Kilobytes Video: MOS Technology 6545 CRTC (9" and 12" Monochrome displays; 40 columns x 25 rows) Sound: Piezo electronic speaker (One square wave voice; Three octaves) Ports: MOS 6520 PIA, MOS 6522 VIA (IEEE-488 edge-connector Port; 2 Commodore Datasette ports; 'EXPANSION' port; CBM parallel programmable "User" port) Keyboard: Full 69 key QWERTY (16 key numeric keypad!; 4 direction 2-key cursor-pad) * Commodore PET 8032 / CBM 8032 (1981) - board design 3, BASIC 4, 12" Screen Again, 80 columns screen and piezo beeper; BASIC 4 has a 80 columns editor ROM. It was possible to expand it to a 8096. CPU: MOS 6502 (1 MHz) RAM: 32k standard (Expandable to even more banked memory) ROM: 20 Kilobytes Video: MOS Technology 6545 CRTC (12" Monochrome displays; 80 columns x 25 rows) Sound: Piezo electronic speaker (One square wave voice; Three octaves) Ports: MOS 6520 PIA, MOS 6522 VIA (IEEE-488 edge-connector Port; 2 Commodore Datasette ports; 'EXPANSION' port; CBM parallel programmable "User" port) Keyboard: Full 73 key QWERTY (11 key numeric keypad!; 4 direction 2-key cursor-pad) * Commodore PET 8032-SK / CBM 8032-SK - board design 3 & 4, BASIC 4, 12" Screen New (smaller) case with detachable keyboard (SK=Separate Keyboard). Board with design 3 didn't fit very well the new case and required extra cables. It was possible to expand it to a 8096-SK. CPU: MOS 6502 (1 MHz) RAM: 32k standard (8096 expanded to 96k, 64k is banked memory) ROM: 20 Kilobytes Video: MOS Technology 6545 CRTC (12" Monochrome display; 80 columns x 25 rows) Sound: Piezo electronic speaker (One square wave voice; Three octaves) Ports: MOS 6520 PIA, MOS 6522 VIA (IEEE-488 square-connector Port; 2 Commodore Datasette ports; 'EXPANSION' port; CBM parallel programmable "User" port) Keyboard: Full 73 key QWERTY (11 key numeric keypad!; 4 direction 2-key cursor-pad) * Commodore CBM 200 Series (198?) Rebadged CMB 80XX models: the CBM 200 was basically a CBM 8032-SK and the CBM 220 was a CBM 8096-SK. * Commodore Super PET / MMF9000 (1981) - BASIC 4, 12" Screen Based on PET 8032. Sold in Germany as MMF (MicroMainFrame) 9000. Machines sold in Italy had 134kB of RAM. CPU: MOS Technology 6502 & 6809 (1 MHz clock speeds) RAM: 96 kilobytes (64K was contained on an expansion board above the motherboard; Early SP9000 models had two boards above the motherboard; Some models also had 3 or more switches) ROM: 48 kilobytes Video: MOS Technology 6545 CRTC (12" Monochrome display; 80 columns x 25 rows; 3+ character sets, 256 characters each) Sound: Piezo electronic speaker (One square wave voice; Three octaves) Ports: 6551 ACIA, MOS 6520 PIA, MOS 6522 VIA (IEEE-488 edge-connector Port; 2 Commodore Datasette ports; 'EXPANSION' port; RS232 Internal port; CBM parallel programmable "User" port; Memory and Processor selection switches) Keyboard: Full-sized 73 key QWERTY (Multi-Font 62 key keyboard; APL Symbols on the front of the keys; 11 key numeric keypad; Editor functions on the front of the keys; 2-key 4-direction cursor-pad) * Commodore CBM SP9000 Similar to Super PET. Dual uP 6502/6809, 96kB RAM, business keyboard. * Commodore PET 8296 / CBM 8296 (1984) - BASIC 4, 12" Screen Shipped with 128k RAM and separate keyboard, it is a complete redesign of the PET universal board. It fits into the separate keyboard case, and directly holds 128k RAM, of which 96k can be used as in the 8096. In addition, using "user jumpers" on the motherboard, the ROM can be completely switched off to access the RAM "under the ROM", so that the complete 128k RAM are accessible. The "user jumpers" could be set to connect to the userport, so this could even be done under program control. CPU: MOS 6502 (1 MHz) RAM: 160K (32k standard) ROM: 24 Kilobytes Video: MOS Technology 6545 CRTC (12" Monochrome displays; 80 columns x 25 rows) Sound: Piezo electronic speaker (One square wave voice; Three octaves) Ports: MOS 6520 PIA, MOS 6522 VIA (IEEE-488 Port; Commodore Datasette port; 'EXPANSION' port; CBM parallel programmable "User" port) Keyboard: Full 73 key QWERTY (11 key numeric keypad!; 4 direction 2-key cursor-pad) see http://www.6502.org/users/andre/petindex/8x96.html and http://www.sothius.com/hypertxt/welcome.html?./additional/cbm8296addition.html for more informations * Commodore PET 8296D / CBM 8296D (1984) - BASIC 4, 12" Screen It was a 8296 with built-in 8250-LP disk drive. * Commodore CBM 8296GD Mentioned at http://www.commodore.ca/products/pet/commodore_pet.htm#Commodore%20PET%20Chronology as a 8296 with a high resolution graphics board and drive. No other info available. [Other models] * Teacher's PET Simply a PET 2001-N with a different label, due to a marketing campaign in US schools * MDS 6500 Modified 2001N-32 with matching 2040 drive. 500 made. * "CASSIE" Synergistics Inc. rebadged 8032 [Board Designs] All these models can be reduced to four board types (source William Levak's doc, layouts from PETFAQ): Static Board (PET 2001) ----------------------- Four variations based on type of RAM(6550 or 2114) and ROM(6540 or 2316B). 4K or 8K static RAM (selected by jumper). 40 column display A video interrupt interferes with disk drive operation. Display timing not compatible with Basic 4.0. ROM sockets: A2 2K character ROM sockets: A2 2K character (2316B) H1 C000-CFFF (6540) H1 C000-C7FF H2 D000-DFFF H2 D000-D7FF H3 E000-E7FF H3 E000-E7FF H4 F000-FFFF H4 F000-F7FF H5 C000-CFFF H5 C800-CFFF H6 D000-DFFF H6 D800-DFFF H7 F000-FFFF H7 F800-FFFF IEEE user tape #2 +------####-####--##-+ ! # ! # ! # exp ! # bus ! # ! # 2000 Series ! ! circa 1977/78 Max RAM - 8k ! (2k) ROMS ! [w/daughter board exp to 32k shown] ! F F E D D C C ! ! 8 0 0 8 0 8 0 ! ! ! tape # RAM MEMORY ! #1 # ! +--------------------+ Dynamic Board (PET/CBM 2001-N/2001-B/4000) ------------------------------------------ 4K, 8K, 16K or 32K dynamic RAM (selected by jumper). 40 column display Can run all versions of 40 column Basic (Basic 1 must be copied to 4K ROMs) Can be jumpered to replace the older board. ROM sockets: UD3 9000-9FFF UD4 A000-AFFF UD5 B000-BFFF UD6 C000-CFFF UD7 D000-DFFF UD8 E000-E7FF UD9 F000-FFFF UF10 2K character IEEE user tape #1 +------####-####--##-+ ! #! ! #! ! #! exp ! ROMS #! bus ! F E D C B A 9 #! ! #! 3000, 4000 Series ! ! (3000 series is European version) ! ! circa 1979/80 Max RAM - 32k ! ! ! ! ! ! tape # RAM MEMORY ! #2 # ! +--------------------+ 80 Column Board (CBM 8000) -------------------------- 16K or 32K RAM (selected by jumper). Uses CTRC to generate 80 column display. Can only run the 80 column version of Basic 4.0. Not compatible with older boards. ROM sockets: UA3 2K or 4K character UD6 F000-FFFF UD7 E000-E7FF UD8 D000-DFFF UD9 C000-CFFF UD10 B000-BFFF UD11 A000-AFFF UD12 9000-9FFF The layout is the same of the one used in Universal Boards below. Universal Board (CBM 8000/PET 4000-12) -------------------------------------- This is an 80 column board with jumpers for different configurations. 16K or 32K RAM (selected by jumper). Uses CTRC to generate 40 or 80 column display (selected by jumpers). Can only run Basic 4.0 versions that support the CRTC. Can be jumpered to replace all older boards. ROM sockets: UA3 2K or 4K character UD6 F000-FFFF UD7 E000-E7FF UD8 D000-DFFF UD9 C000-CFFF UD10 B000-BFFF UD11 A000-AFFF UD12 9000-9FFF IEEE user tape #1 +------####-####--##-+ ! # # tape ! # # #2 ! R exp bus # ! ! A #! ! M 9 #! ! A #! 4000, 8000 Series ! M R B ! circa 1981 Max RAM - 32k* ! E O C ! [8296 layout not shown] ! M M D ! ! O S E ! ! R F ! ! Y ! ! spkr! +--------------------+ [TO DO] * Verify if pre-CRTC models had differences between NTSC & PAL systems. If no differences arise we can merge back the following sets: + cbm30 (same as pet2001n) & cbm30b (same as pet2001b) + cbm40o (same as pet40on) & cbm40ob (same as pet40ob) * Emulate SuperPET / SP9000 / MMF9000 and their differences * Emulate CBM 8296 & 8296D (basically only a placeholder now) * Add proper tape support * Add sound support, for systems which had it * Find out answers to the following details: + Did BASIC 2 also come as upgrade ROMs for PET 2001 with Static Board? If this is the case, we need to support the splitted versions of the ROMs as an alternative BIOS to pet2001. + Did final PET 40XX & CBM 40XX with 40 Columns & CRTC support had business or normal keyboards? * Find confirmation about some models (which I don't believe ever existed, but...): + were there PET 2001-16k & PET 2001-32k with Calculator type keyboard? + were there CBM 20XX in Europe? + what about the following unrealistic RAM configurations: 4004? 8008? 8016? 8064? + did a CBM 210 exist? */ #include "emu.h" #include "cpu/m6809/m6809.h" #include "cpu/m6502/m6502.h" #include "machine/6821pia.h" #include "machine/6522via.h" #include "includes/pet.h" #include "machine/cbmipt.h" #include "video/mc6845.h" #include "machine/ram.h" /* devices config */ #include "includes/cbm.h" #include "formats/cbm_snqk.h" #include "machine/ieee488.h" /************************************* * * Main CPU memory handlers * *************************************/ static ADDRESS_MAP_START(pet_mem , AS_PROGRAM, 8, pet_state ) AM_RANGE(0x8000, 0x83ff) AM_MIRROR(0x0c00) AM_RAM AM_SHARE("videoram") AM_RANGE(0xa000, 0xe7ff) AM_ROM AM_RANGE(0xe810, 0xe813) AM_DEVREADWRITE("pia_0", pia6821_device, read, write) AM_RANGE(0xe820, 0xe823) AM_DEVREADWRITE("pia_1", pia6821_device, read, write) AM_RANGE(0xe840, 0xe84f) AM_DEVREADWRITE("via6522_0", via6522_device, read, write) /* AM_RANGE(0xe900, 0xe91f) AM_DEVREAD_LEGACY("ieee_bus", cbm_ieee_state) // for debugging */ AM_RANGE(0xf000, 0xffff) AM_ROM ADDRESS_MAP_END static ADDRESS_MAP_START( pet40_mem , AS_PROGRAM, 8, pet_state ) AM_RANGE(0x8000, 0x83ff) AM_MIRROR(0x0c00) AM_RAM AM_SHARE("videoram") AM_RANGE(0xa000, 0xe7ff) AM_ROM AM_RANGE(0xe810, 0xe813) AM_DEVREADWRITE("pia_0", pia6821_device, read, write) AM_RANGE(0xe820, 0xe823) AM_DEVREADWRITE("pia_1", pia6821_device, read, write) AM_RANGE(0xe840, 0xe84f) AM_DEVREADWRITE("via6522_0", via6522_device, read, write) AM_RANGE(0xe880, 0xe880) AM_DEVWRITE("crtc", mc6845_device, address_w) AM_RANGE(0xe881, 0xe881) AM_DEVREADWRITE("crtc", mc6845_device, register_r, register_w) AM_RANGE(0xf000, 0xffff) AM_ROM ADDRESS_MAP_END static ADDRESS_MAP_START( pet80_mem , AS_PROGRAM, 8, pet_state ) AM_RANGE(0x8000, 0x8fff) AM_RAMBANK("bank1") AM_RANGE(0x9000, 0x9fff) AM_RAMBANK("bank2") AM_RANGE(0xa000, 0xafff) AM_RAMBANK("bank3") AM_RANGE(0xb000, 0xbfff) AM_RAMBANK("bank4") AM_RANGE(0xc000, 0xe7ff) AM_RAMBANK("bank6") #if 1 AM_RANGE(0xe800, 0xefff) AM_RAMBANK("bank7") #else AM_RANGE(0xe810, 0xe813) AM_DEVREADWRITE_LEGACY("pia_0", pia6821_r, pia6821_w) AM_RANGE(0xe820, 0xe823) AM_DEVREADWRITE_LEGACY("pia_1", pia6821_r, pia6821_w) AM_RANGE(0xe840, 0xe84f) AM_DEVREADWRITE("via6522_0", via6522_device, read, write) AM_RANGE(0xe880, 0xe880) AM_DEVWRITE("crtc", mc6845_device, address_w) AM_RANGE(0xe881, 0xe881) AM_DEVREADWRITE("crtc", mc6845_device, register_r, register_w) #endif AM_RANGE(0xf000, 0xffff) AM_READ_BANK("bank8") AM_RANGE(0xf000, 0xffef) AM_WRITE_BANK("bank8") AM_RANGE(0xfff1, 0xffff) AM_WRITE_BANK("bank9") ADDRESS_MAP_END /* 0xe880 crtc 0xefe0 6702 encoder 0xeff0 acia6551 0xeff8 super pet system latch 61432 SuperPET system latch bit 0 1=6502, 0=6809 bit 1 0=read only bit 3 diagnostic sense: set to 1 to switch to 6502 61436 SuperPET bank select latch bit 0-3 bank bit 7 1=enable system latch */ static ADDRESS_MAP_START( superpet_mem , AS_PROGRAM, 8, pet_state ) AM_RANGE(0x0000, 0x7fff) AM_RAM AM_SHARE("memory") AM_RANGE(0x8000, 0x87ff) AM_RAM AM_SHARE("videoram") AM_RANGE(0xa000, 0xe7ff) AM_ROM AM_RANGE(0xe810, 0xe813) AM_DEVREADWRITE("pia_0", pia6821_device, read, write) AM_RANGE(0xe820, 0xe823) AM_DEVREADWRITE("pia_1", pia6821_device, read, write) AM_RANGE(0xe840, 0xe84f) AM_DEVREADWRITE("via6522_0", via6522_device, read, write) AM_RANGE(0xe880, 0xe880) AM_DEVWRITE("crtc", mc6845_device, address_w) AM_RANGE(0xe881, 0xe881) AM_DEVREADWRITE("crtc", mc6845_device, register_r, register_w) /* 0xefe0, 0xefe3, mos 6702 */ /* 0xeff0, 0xeff3, acia6551 */ AM_RANGE(0xeff8, 0xefff) AM_READWRITE_LEGACY(superpet_r, superpet_w) AM_RANGE(0xf000, 0xffff) AM_ROM ADDRESS_MAP_END static ADDRESS_MAP_START( superpet_m6809_mem, AS_PROGRAM, 8, pet_state ) AM_RANGE(0x0000, 0x7fff) AM_RAM AM_SHARE("memory") /* same memory as m6502 */ AM_RANGE(0x8000, 0x87ff) AM_RAM AM_SHARE("videoram") /* same memory as m6502 */ AM_RANGE(0x9000, 0x9fff) AM_RAMBANK("bank1") /* 64 kbyte ram turned in */ AM_RANGE(0xa000, 0xe7ff) AM_ROM AM_RANGE(0xe810, 0xe813) AM_DEVREADWRITE("pia_0", pia6821_device, read, write) AM_RANGE(0xe820, 0xe823) AM_DEVREADWRITE("pia_1", pia6821_device, read, write) AM_RANGE(0xe840, 0xe84f) AM_DEVREADWRITE("via6522_0", via6522_device, read, write) AM_RANGE(0xe880, 0xe880) AM_DEVWRITE("crtc", mc6845_device, address_w) AM_RANGE(0xe881, 0xe881) AM_DEVREADWRITE("crtc", mc6845_device, register_r, register_w) AM_RANGE(0xeff8, 0xefff) AM_READWRITE_LEGACY(superpet_r, superpet_w) AM_RANGE(0xf000, 0xffff) AM_ROM ADDRESS_MAP_END /************************************* * * Input Ports * *************************************/ static INPUT_PORTS_START( pet ) PORT_INCLUDE( pet_keyboard ) /* ROW0 -> ROW9 */ PORT_INCLUDE( pet_special ) /* SPECIAL */ PORT_INCLUDE( pet_config ) /* CFG */ INPUT_PORTS_END static INPUT_PORTS_START( petb ) PORT_INCLUDE( pet_business_keyboard ) /* ROW0 -> ROW9 */ PORT_INCLUDE( pet_special ) /* SPECIAL */ PORT_INCLUDE( pet_config ) /* CFG */ PORT_MODIFY("CFG") PORT_BIT( 0x180, 0x000, IPT_UNUSED ) INPUT_PORTS_END static INPUT_PORTS_START( cbm8096 ) PORT_INCLUDE( petb ) PORT_MODIFY("CFG") PORT_DIPNAME( 0x08, 0x08, "CBM8096, 8296 Expansion Memory") PORT_DIPSETTING( 0x00, DEF_STR( No ) ) PORT_DIPSETTING( 0x08, DEF_STR( Yes ) ) INPUT_PORTS_END static INPUT_PORTS_START (superpet) PORT_INCLUDE( petb ) PORT_MODIFY("CFG") PORT_DIPNAME( 0x04, 0x04, "CPU Select") PORT_DIPSETTING( 0x00, "M6502" ) PORT_DIPSETTING( 0x04, "M6809" ) INPUT_PORTS_END /************************************* * * Graphics definitions * *************************************/ static const unsigned char pet_palette[] = { 0,0,0, /* black */ 0,0x80,0, /* green */ }; static const gfx_layout pet_charlayout = { 8,8, 256, /* 256 characters */ 1, /* 1 bits per pixel */ { 0 }, /* no bitplanes; 1 bit per pixel */ /* x offsets */ { 0,1,2,3,4,5,6,7 }, /* y offsets */ { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8, }, 8*8 }; static const gfx_layout pet80_charlayout = { 8,16, 256, /* 256 characters */ 1, /* 1 bits per pixel */ { 0 }, /* no bitplanes; 1 bit per pixel */ /* x offsets */ { 0,1,2,3,4,5,6,7 }, /* y offsets */ { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8, 8*8, 9*8, 10*8, 11*8, 12*8, 13*8, 14*8, 15*8 }, 8*16 }; static GFXDECODE_START( pet ) GFXDECODE_ENTRY( "gfx1", 0x0000, pet_charlayout, 0, 1 ) GFXDECODE_ENTRY( "gfx1", 0x0800, pet_charlayout, 0, 1 ) GFXDECODE_END static GFXDECODE_START( pet80 ) GFXDECODE_ENTRY( "gfx1", 0x0000, pet80_charlayout, 0, 1 ) GFXDECODE_ENTRY( "gfx1", 0x1000, pet80_charlayout, 0, 1 ) GFXDECODE_END static GFXDECODE_START( superpet ) GFXDECODE_ENTRY( "gfx1", 0x0000, pet80_charlayout, 0, 1 ) GFXDECODE_ENTRY( "gfx1", 0x1000, pet80_charlayout, 0, 1 ) GFXDECODE_ENTRY( "gfx1", 0x2000, pet80_charlayout, 0, 1 ) GFXDECODE_ENTRY( "gfx1", 0x3000, pet80_charlayout, 0, 1 ) GFXDECODE_END static const mc6845_interface crtc_pet40 = { "screen", 8, NULL, pet40_update_row, NULL, DEVCB_LINE(pet_display_enable_changed), DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, NULL }; static const mc6845_interface crtc_pet80 = { "screen", 16, NULL, pet80_update_row, NULL, DEVCB_LINE(pet_display_enable_changed), DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, NULL }; void pet_state::palette_init() { int i; for ( i = 0; i < sizeof(pet_palette) / 3; i++ ) { palette_set_color_rgb(machine(), i, pet_palette[i*3], pet_palette[i*3+1], pet_palette[i*3+2]); } } VIDEO_START_MEMBER(pet_state,pet_crtc) { } static IEEE488_INTERFACE( ieee488_intf ) { DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, DEVCB_NULL, DEVCB_DEVICE_LINE_MEMBER("pia_1", pia6821_device, cb1_w), DEVCB_DEVICE_LINE_MEMBER("pia_1", pia6821_device, ca1_w), DEVCB_NULL }; /************************************* * * Machine driver * *************************************/ static MACHINE_CONFIG_START( pet_general, pet_state ) /* basic machine hardware */ MCFG_CPU_ADD("maincpu", M6502, XTAL_8MHz/8) MCFG_CPU_PROGRAM_MAP(pet_mem) MCFG_CPU_VBLANK_INT_DRIVER("screen", pet_state, pet_frame_interrupt) /* video hardware */ MCFG_SCREEN_ADD("screen", RASTER) MCFG_SCREEN_REFRESH_RATE(60) MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500)) /* not accurate */ MCFG_SCREEN_SIZE(320, 200) MCFG_SCREEN_VISIBLE_AREA(0, 320 - 1, 0, 200 - 1) MCFG_SCREEN_UPDATE_DRIVER(pet_state, screen_update_pet) MCFG_GFXDECODE( pet ) MCFG_PALETTE_LENGTH(ARRAY_LENGTH(pet_palette) / 3) /* cassette */ MCFG_CASSETTE_ADD( CASSETTE_TAG, cbm_cassette_interface ) MCFG_CASSETTE_ADD( CASSETTE2_TAG, cbm_cassette_interface ) /* via */ MCFG_VIA6522_ADD( "via6522_0", 0, pet_via) /* pias */ MCFG_PIA6821_ADD( "pia_0", pet_pia0) MCFG_PIA6821_ADD( "pia_1", pet_pia1) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( pet, pet_general ) MCFG_QUICKLOAD_ADD("quickload", cbm_pet, "p00,prg", CBM_QUICKLOAD_DELAY_SECONDS) MCFG_FRAGMENT_ADD(pet_cartslot) /* internal ram */ MCFG_RAM_ADD(RAM_TAG) MCFG_RAM_DEFAULT_SIZE("32K") MCFG_RAM_EXTRA_OPTIONS("8K,16K") /* IEEE bus */ MCFG_CBM_IEEE488_ADD(ieee488_intf, "c4040") MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( petb, pet ) MCFG_PIA6821_MODIFY( "pia_0", petb_pia0 ) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( pet2001, pet_general ) MCFG_QUICKLOAD_ADD("quickload", cbm_pet1, "p00,prg", CBM_QUICKLOAD_DELAY_SECONDS) MCFG_FRAGMENT_ADD(pet_cartslot) /* internal ram */ MCFG_RAM_ADD(RAM_TAG) MCFG_RAM_DEFAULT_SIZE("8K") MCFG_RAM_EXTRA_OPTIONS("4K") /* IEEE bus */ MCFG_CBM_IEEE488_ADD(ieee488_intf, "c4040") MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( pet40, pet ) MCFG_CPU_MODIFY( "maincpu" ) MCFG_CPU_PROGRAM_MAP( pet40_mem) MCFG_MC6845_ADD("crtc", MC6845, XTAL_17_73447MHz/3 /* This is a wild guess and mostly likely incorrect */, crtc_pet40) MCFG_VIDEO_START_OVERRIDE(pet_state, pet_crtc ) MCFG_SCREEN_MODIFY("screen") MCFG_SCREEN_UPDATE_DEVICE( "crtc", mc6845_device, screen_update ) MCFG_FRAGMENT_ADD(pet4_cartslot) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( pet40pal, pet40 ) MCFG_SCREEN_MODIFY("screen") MCFG_SCREEN_REFRESH_RATE(50) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( pet80, pet_general ) MCFG_QUICKLOAD_ADD("quickload", cbm_pet, "p00,prg", CBM_QUICKLOAD_DELAY_SECONDS) MCFG_FRAGMENT_ADD(pet_cartslot) MCFG_CPU_MODIFY( "maincpu" ) MCFG_CPU_PROGRAM_MAP( pet80_mem) /* video hardware */ MCFG_SCREEN_MODIFY("screen") MCFG_SCREEN_SIZE(640, 250) MCFG_SCREEN_VISIBLE_AREA(0, 640 - 1, 0, 250 - 1) MCFG_SCREEN_UPDATE_DEVICE( "crtc", mc6845_device, screen_update ) MCFG_MC6845_ADD("crtc", MC6845, XTAL_12MHz / 2 /* This is a wild guess and mostly likely incorrect */, crtc_pet80) MCFG_GFXDECODE( pet80 ) MCFG_VIDEO_START_OVERRIDE(pet_state, pet_crtc ) MCFG_PIA6821_MODIFY( "pia_0", petb_pia0 ) MCFG_FRAGMENT_ADD(pet4_cartslot) /* internal ram */ MCFG_RAM_ADD(RAM_TAG) MCFG_RAM_DEFAULT_SIZE("32K") /* IEEE bus */ MCFG_CBM_IEEE488_ADD(ieee488_intf, "c8050") MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( pet80pal, pet80 ) MCFG_SCREEN_MODIFY("screen") MCFG_SCREEN_REFRESH_RATE(50) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( superpet, pet80 ) MCFG_CPU_MODIFY( "maincpu" ) MCFG_CPU_PROGRAM_MAP( superpet_mem) /* m6809 cpu */ MCFG_CPU_ADD("m6809", M6809, 1000000) MCFG_CPU_PROGRAM_MAP(superpet_m6809_mem) MCFG_CPU_VBLANK_INT_DRIVER("screen", pet_state, pet_frame_interrupt) MCFG_SCREEN_MODIFY("screen") MCFG_SCREEN_REFRESH_RATE(50) MCFG_GFXDECODE( superpet ) MCFG_PIA6821_MODIFY( "pia_0", petb_pia0 ) MACHINE_CONFIG_END /************************************* * * ROM definition(s) * *************************************/ /* PET 2001 - Board type 1 (Static Board) */ /* BASIC 1 - "*** COMMODORE BASIC ***" at boot */ /* Four board variations depending on ROM sockets: either 6540 or 2316B RAM: either 6550 or 2114 The ROM content is the same in both cases, but the labels differ. Below we use labels from the 2316B version. For documentation sake, these would have been the labels based on the board with 6540 ROMs 901439-01.h1 / 901439-09.h1 901439-05.h5 901439-02.h2 901439-06.h6 901439-03.h3 901439-04.h4 901439-07.h7 901439-08.a2 Also, in some board with 2316B, the location of the ROMs changes h1 <-> h5, h2 <-> h6 and h4 <-> h7 */ ROM_START( pet2001 ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_SYSTEM_BIOS( 0, "basic1", "BASIC 1r" ) ROMX_LOAD( "901447-09.h1", 0xc000, 0x800, CRC(03cf16d0) SHA1(1330580c0614d3556a389da4649488ba04a60908), ROM_BIOS(1) ) ROM_SYSTEM_BIOS( 1, "basic1o", "BASIC 1" ) ROMX_LOAD( "901447-01.h1", 0xc000, 0x800, CRC(a055e33a) SHA1(831db40324113ee996c434d38b4add3fd1f820bd), ROM_BIOS(2) ) ROM_LOAD( "901447-02.h5", 0xc800, 0x800, CRC(69fd8a8f) SHA1(70c0f4fa67a70995b168668c957c3fcf2c8641bd) ) ROM_LOAD( "901447-03.h2", 0xd000, 0x800, CRC(d349f2d4) SHA1(4bf2c20c51a63d213886957485ebef336bb803d0) ) ROM_LOAD( "901447-04.h6", 0xd800, 0x800, CRC(850544eb) SHA1(d293972d529023d8fd1f493149e4777b5c253a69) ) ROM_LOAD( "901447-05.h3", 0xe000, 0x800, CRC(9e1c5cea) SHA1(f02f5fb492ba93dbbd390f24c10f7a832dec432a) ) ROM_LOAD( "901447-06.h4", 0xf000, 0x800, CRC(661a814a) SHA1(960717282878e7de893d87242ddf9d1512be162e) ) ROM_LOAD( "901447-07.h7", 0xf800, 0x800, CRC(c4f47ad1) SHA1(d440f2510bc52e20c3d6bc8b9ded9cea7f462a9c) ) ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "901447-08.a2", 0x0000, 0x800, CRC(54f32f45) SHA1(3e067cc621e4beafca2b90cb8f6dba975df2855b) ) ROM_END /* PET 2001-N / 2001-B / CBM 30XX / PET 40XX (early) / CBM 40XX (early) - Board type 2 (Dynamic Board) */ /* BASIC 1 upgraded / BASIC 2 - "### COMMODORE BASIC ###" at boot */ /* Again different kind of ROM sockets can be found. */ /* These boards would support BASIC 1 as well, if the content would be put on 4K ROMs */ /* BASIC 2 */ ROM_START( pet2001n ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-01.ud6", 0xc000, 0x1000, CRC(63a7fe4a) SHA1(3622111f486d0e137022523657394befa92bde44) ) // BASIC 2 ROM_LOAD( "901465-02.ud7", 0xd000, 0x1000, CRC(ae4cb035) SHA1(1bc0ebf27c9bb62ad71bca40313e874234cab6ac) ) // BASIC 2 ROM_LOAD( "901447-24.ud8", 0xe000, 0x800, CRC(e459ab32) SHA1(5e5502ce32f5a7e387d65efe058916282041e54b) ) // Screen Editor (40 columns, no CRTC, Normal Keyb) ROM_LOAD( "901465-03.ud9", 0xf000, 0x1000, CRC(f02238e2) SHA1(38742bdf449f629bcba6276ef24d3daeb7da6e84) ) // Kernal ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "901447-10.uf10", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* BASIC 2 - Business Keyboard (Number keys, etc.) */ ROM_START( pet2001b ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-01.ud6", 0xc000, 0x1000, CRC(63a7fe4a) SHA1(3622111f486d0e137022523657394befa92bde44) ) // BASIC 2 ROM_LOAD( "901465-02.ud7", 0xd000, 0x1000, CRC(ae4cb035) SHA1(1bc0ebf27c9bb62ad71bca40313e874234cab6ac) ) // BASIC 2 ROM_LOAD( "901474-01.ud8", 0xe000, 0x800, CRC(05db957e) SHA1(174ace3a8c0348cd21d39cc864e2adc58b0101a9) ) // Screen Editor (40 columns, no CRTC, Business Keyb) ROM_LOAD( "901465-03.ud9", 0xf000, 0x1000, CRC(f02238e2) SHA1(38742bdf449f629bcba6276ef24d3daeb7da6e84) ) // Kernal ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "901447-10.uf10", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END #define rom_cbm30 rom_pet2001n #define rom_cbm30b rom_pet2001b /* BASIC 4, but 40 columns only and no CRTC */ ROM_START( pet40on ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_SYSTEM_BIOS( 0, "basic4", "BASIC 4r" ) ROMX_LOAD( "901465-23.ud5", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc), ROM_BIOS(1) ) // BASIC 4 ROM_SYSTEM_BIOS( 1, "basic4o", "BASIC 4" ) ROMX_LOAD( "901465-19.ud5", 0xb000, 0x1000, CRC(3a5f5721) SHA1(bc2b7c99495fea3eda950ee9e3d6cabe448a452b), ROM_BIOS(2) ) ROM_LOAD( "901465-20.ud6", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud7", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901447-29.ud8", 0xe000, 0x800, CRC(e5714d4c) SHA1(e88f56e5c54b0e8d8d4e8cb39a4647c803c1f51c) ) // Screen Editor (40 columns, no CRTC, Normal Keyb) ROM_LOAD( "901465-22.ud9", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "901447-10.uf10", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* BASIC 4, but 40 columns only and no CRTC - Business Keyboard (Number keys, etc.) */ ROM_START( pet40ob ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_SYSTEM_BIOS( 0, "basic4", "BASIC 4r" ) ROMX_LOAD( "901465-23.ud5", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc), ROM_BIOS(1) ) ROM_SYSTEM_BIOS( 1, "basic4o", "BASIC 4" ) ROMX_LOAD( "901465-19.ud5", 0xb000, 0x1000, CRC(3a5f5721) SHA1(bc2b7c99495fea3eda950ee9e3d6cabe448a452b), ROM_BIOS(2) ) ROM_LOAD( "901465-20.ud6", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud7", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901474-02.ud8", 0xe000, 0x800, CRC(75ff4af7) SHA1(0ca5c4e8f532f914cb0bf86ea9900f20f0a655ce) ) // Screen Editor (40 columns, no CRTC, Business Keyb) ROM_LOAD( "901465-22.ud9", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "901447-10.uf10", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END #define rom_cbm40o rom_pet40on #define rom_cbm40ob rom_pet40ob /* PET 40XX (later) / PET 80XX / CBM 400XX (later) / CBM 80XX - Board type 3 (80 columns Board) & 4 (Universal Board) */ /* BASIC 4, Board 3: 80 columns only using CRTC - Board 4: 40 or 80 columns using CRTC, changed through a jumper on the board */ /* Board 3 ones can only run the 80 columns BASIC 4, Board 4 can run all BASIC versions supporting CRTC */ /* 40 columns - 60 Hz */ ROM_START( pet40n ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901499-01.ud7", 0xe000, 0x800, CRC(5f85bdf8) SHA1(8cbf086c1ce4dfb2a2fe24c47476dfb878493dee) ) // Screen Editor (40 columns, CRTC 60Hz, Normal Keyb?) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "901447-10.ua3", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* 40 columns - 50 Hz */ ROM_START( cbm40n ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901498-01.ud7", 0xe000, 0x800, CRC(3370e359) SHA1(05af284c914d53a52987b5f602466de75765f650) ) // Screen Editor (40 columns, CRTC 50Hz, Normal Keyb?) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "901447-10.ua3", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* 80 columns - 60 Hz */ ROM_START( pet40b ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901474-03.ud7", 0xe000, 0x800, CRC(5674dd5e) SHA1(c605fa343fd77c73cbe1e0e9567e2f014f6e7e30) ) // Screen Editor (80 columns, CRTC 60Hz, Business Keyb) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x2000, "gfx1", 0 ) ROM_LOAD( "901447-10.ua3", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* 80 columns - 50 Hz */ ROM_START( cbm40b ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_SYSTEM_BIOS( 0, "default", "BASIC 4" ) ROMX_LOAD( "901474-04.ud7", 0xe000, 0x800, CRC(abb000e7) SHA1(66887061b6c4ebef7d6efb90af9afd5e2c3b08ba), ROM_BIOS(1) ) // Screen Editor (80 columns, CRTC 50Hz, Business Keyb) ROM_SYSTEM_BIOS( 1, "alt", "BASIC 4 (alt Editor)" ) ROMX_LOAD( "901474-04a.ud7", 0xe000, 0x800, BAD_DUMP CRC(845a44e6) SHA1(81975eab31a8f4f51ae2a20d099a567c7b3f2dd1), ROM_BIOS(2) ) ROM_SYSTEM_BIOS( 2, "old", "BASIC 4 (Editor dated 3681)" ) ROMX_LOAD( "901474-04o.ud7", 0xe000, 0x800, CRC(c1ffca3a) SHA1(7040b283ba39e9630e3d147f7d076b7abc39bc70), ROM_BIOS(3) ) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x2000, "gfx1", 0 ) ROM_LOAD( "901447-10.ua3", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* 80 columns - 60 Hz - can be expanded to 96k RAM */ ROM_START( pet80 ) ROM_REGION( 0x20000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901474-03.ud7", 0xe000, 0x800, CRC(5674dd5e) SHA1(c605fa343fd77c73cbe1e0e9567e2f014f6e7e30) ) // Screen Editor (80 columns, CRTC 60Hz, Business Keyb) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x2000, "gfx1", 0 ) ROM_LOAD( "901447-10.ua3", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* 80 columns - 50 Hz - can be expanded to 96k RAM */ ROM_START( cbm80 ) ROM_REGION( 0x20000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_SYSTEM_BIOS( 0, "default", "BASIC 4" ) ROMX_LOAD( "901474-04.ud7", 0xe000, 0x800, CRC(abb000e7) SHA1(66887061b6c4ebef7d6efb90af9afd5e2c3b08ba), ROM_BIOS(1) ) // Screen Editor (80 columns, CRTC 50Hz, Business Keyb) ROM_SYSTEM_BIOS( 1, "alt", "BASIC 4 (alt Editor)" ) ROMX_LOAD( "901474-04a.ud7", 0xe000, 0x800, BAD_DUMP CRC(845a44e6) SHA1(81975eab31a8f4f51ae2a20d099a567c7b3f2dd1), ROM_BIOS(2) ) ROM_SYSTEM_BIOS( 2, "old", "BASIC 4 (Editor dated 3681)" ) ROMX_LOAD( "901474-04o.ud7", 0xe000, 0x800, CRC(c1ffca3a) SHA1(7040b283ba39e9630e3d147f7d076b7abc39bc70), ROM_BIOS(3) ) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x2000, "gfx1", 0 ) ROM_LOAD( "901447-10.ua3", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END /* Two different layouts are documented for the m6809 */ /* The 2532 EEPROM listed below (2516 for the .u21 one) could have been replaced by three 2764 EEPROM. In this case the labels would have been as follows 970018-12.u47 (contents: u17+u18 below) 970019-12.u48 (contents: u19+u20 below) 970020-12.u49 (contents: u21+u22 below) */ ROM_START( superpet ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901474-04.ud7", 0xe000, 0x800, CRC(abb000e7) SHA1(66887061b6c4ebef7d6efb90af9afd5e2c3b08ba) ) // Screen Editor (80 columns, CRTC 50Hz, Business Keyb) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x10000, "m6809", 0 ) ROM_LOAD( "901898-01.u17", 0xa000, 0x1000, CRC(728a998b) SHA1(0414b3ab847c8977eb05c2fcc72efcf2f9d92871) ) ROM_LOAD( "901898-02.u18", 0xb000, 0x1000, CRC(6beb7c62) SHA1(df154939b934d0aeeb376813ec1ba0d43c2a3378) ) ROM_LOAD( "901898-03.u19", 0xc000, 0x1000, CRC(5db4983d) SHA1(6c5b0cce97068f8841112ba6d5cd8e568b562fa3) ) ROM_LOAD( "901898-04.u20", 0xd000, 0x1000, CRC(f55fc559) SHA1(b42a2050a319a1ffca7868a8d8d635fadd37ec37) ) ROM_LOAD( "901897-01.u21", 0xe000, 0x800, CRC(b2cee903) SHA1(e8ce8347451a001214a5e71a13081b38b4be23bc) ) ROM_LOAD( "901898-05.u22", 0xf000, 0x1000, CRC(f42df0cb) SHA1(9b4a5134d20345171e7303445f87c4e0b9addc96) ) ROM_REGION( 0x4000, "gfx1", 0 ) ROM_LOAD( "901640-01.ub3", 0x0000, 0x1000, CRC(ee8229c4) SHA1(bf346f11595a3e65e55d6aeeaa2c0cec807b66c7) ) ROM_END #define rom_sp9000 rom_superpet /* CBM 8296 / 8296D - only ROM loading added */ ROM_START( cbm8296 ) ROM_REGION( 0x20000, "maincpu", 0 ) ROM_LOAD( "324746-01.ue7", 0xb000, 0x3000, CRC(7935b528) SHA1(5ab17ee70467152bf2130e3f48a2aa81e9df93c9) ) // BASIC 4 // FIX ME!! ROM_CONTINUE( 0xf000, 0x1000 ) ROM_LOAD( "901474-04.ue8", 0xe000, 0x800, CRC(c1ffca3a) SHA1(7040b283ba39e9630e3d147f7d076b7abc39bc70) ) // Dated 0384, coincides with 3681 above according to Andr? Fachat's notes ROM_REGION( 0x4000, "gfx1", 0 ) ROM_LOAD( "901447-10.uc5", 0x0000, 0x800, CRC(d8408674) SHA1(0157a2d55b7ac4eaeb38475889ebeea52e2593db) ) // Character Generator ROM_END #define rom_cbm8296d rom_cbm8296 /* PAL regional variants */ ROM_START( cbm80ger ) ROM_REGION( 0x20000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "german.bin", 0xe000, 0x800, CRC(1c1e597d) SHA1(7ac75ed73832847623c9f4f197fe7fb1a73bb41c) ) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x2000, "gfx1", 0 ) ROM_LOAD( "chargen.de", 0x0000, 0x800, CRC(3bb8cb87) SHA1(a4f0df13473d7f9cd31fd62cfcab11318e2fb1dc) ) ROM_END ROM_START( cbm80swe ) ROM_REGION( 0x20000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "swedish.bin", 0xe000, 0x800, CRC(75901dd7) SHA1(2ead0d83255a344a42bb786428353ca48d446d03) ) // It had a label "8000-UD7, SCREEN-04" ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x2000, "gfx1", 0 ) ROM_LOAD( "901447-14.ua3", 0x0000, 0x800, CRC(48c77d29) SHA1(aa7c8ff844d16ec05e2b32acc586c58d9e35388c) ) // Character Generator ROM_END /* This had only the CharGen dumped, the editor needs to be dumped as well (and the other ones verified)!! */ ROM_START( cbm30nor ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-01.ud6", 0xc000, 0x1000, CRC(63a7fe4a) SHA1(3622111f486d0e137022523657394befa92bde44) ) // BASIC 2 ROM_LOAD( "901465-02.ud7", 0xd000, 0x1000, CRC(ae4cb035) SHA1(1bc0ebf27c9bb62ad71bca40313e874234cab6ac) ) // BASIC 2 ROM_LOAD( "901474-01.ud8", 0xe000, 0x800, BAD_DUMP CRC(05db957e) SHA1(174ace3a8c0348cd21d39cc864e2adc58b0101a9) ) // Screen Editor to be redumped ROM_LOAD( "901465-03.ud9", 0xf000, 0x1000, CRC(f02238e2) SHA1(38742bdf449f629bcba6276ef24d3daeb7da6e84) ) // Kernal ROM_REGION( 0x1000, "gfx1", 0 ) ROM_LOAD( "norwegian.uf10", 0x0000, 0x800, CRC(7c00534a) SHA1(2c46bd5f5351530ceb52686e5196de995e28e24f) ) // Character Generator dumped from a CBM 3032 // FIX ME!! ROM_END /* This had only the CharGen dumped, the editor needs to be dumped as well (and the other ones verified)!! */ ROM_START( cbm80hun ) ROM_REGION( 0x20000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "901474-04.ud7", 0xe000, 0x800, BAD_DUMP CRC(abb000e7) SHA1(66887061b6c4ebef7d6efb90af9afd5e2c3b08ba) ) // Screen Editor (80 columns, CRTC 50Hz, Business Keyb) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x2000, "gfx1", 0 ) ROM_LOAD( "hungarian.ua3", 0x0000, 0x800, CRC(a02d8122) SHA1(2fedbb59068b457d98f28de79f1817e25f745604) ) // Character Generator // FIX ME!! ROM_END /* Swedish M6809 roms needed */ ROM_START( mmf9000s ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "901465-23.ud10", 0xb000, 0x1000, CRC(ae3deac0) SHA1(975ee25e28ff302879424587e5fb4ba19f403adc) ) // BASIC 4 ROM_LOAD( "901465-20.ud9", 0xc000, 0x1000, CRC(0fc17b9c) SHA1(242f98298931d21eaacb55fe635e44b7fc192b0a) ) // BASIC 4 ROM_LOAD( "901465-21.ud8", 0xd000, 0x1000, CRC(36d91855) SHA1(1bb236c72c726e8fb029c68f9bfa5ee803faf0a8) ) // BASIC 4 ROM_LOAD( "swedish.bin", 0xe000, 0x800, CRC(75901dd7) SHA1(2ead0d83255a344a42bb786428353ca48d446d03) ) ROM_LOAD( "901465-22.ud6", 0xf000, 0x1000, CRC(cc5298a1) SHA1(96a0fa56e0c937da92971d9c99d504e44e898806) ) // Kernal ROM_REGION( 0x20000, "m6809", 0 ) ROM_LOAD( "901898-01.u17", 0xa000, 0x1000, BAD_DUMP CRC(728a998b) SHA1(0414b3ab847c8977eb05c2fcc72efcf2f9d92871) ) ROM_LOAD( "901898-02.u18", 0xb000, 0x1000, BAD_DUMP CRC(6beb7c62) SHA1(df154939b934d0aeeb376813ec1ba0d43c2a3378) ) ROM_LOAD( "901898-03.u19", 0xc000, 0x1000, BAD_DUMP CRC(5db4983d) SHA1(6c5b0cce97068f8841112ba6d5cd8e568b562fa3) ) ROM_LOAD( "901898-04.u20", 0xd000, 0x1000, BAD_DUMP CRC(f55fc559) SHA1(b42a2050a319a1ffca7868a8d8d635fadd37ec37) ) ROM_LOAD( "901897-01.u21", 0xe000, 0x800, BAD_DUMP CRC(b2cee903) SHA1(e8ce8347451a001214a5e71a13081b38b4be23bc) ) ROM_LOAD( "901898-05.u22", 0xf000, 0x1000, BAD_DUMP CRC(f42df0cb) SHA1(9b4a5134d20345171e7303445f87c4e0b9addc96) ) ROM_REGION( 0x4000, "gfx1", 0 ) ROM_LOAD("skand.gen.ub3", 0x0000, 0x1000, CRC(da1cd630) SHA1(35f472114ff001259bdbae073ae041b0759e32cb) ) // Actual label was "901640-01 SKAND.GEN." ROM_END /*************************************************************************** Game driver(s) ***************************************************************************/ /* YEAR NAME PARENT COMPAT MACHINE INPUT INIT COMPANY FULLNAME */ COMP(1977, pet2001, 0, 0, pet2001, pet, pet_state, pet2001, "Commodore Business Machines", "PET 2001", GAME_NO_SOUND) COMP(1979, pet2001n, pet2001, 0, pet, pet, pet_state, pet, "Commodore Business Machines", "PET 2001-N", GAME_NO_SOUND) COMP(1979, pet2001b, pet2001, 0, petb, petb, pet_state, pet, "Commodore Business Machines", "PET 2001-B", GAME_NO_SOUND) COMP(1979, cbm30, pet2001, 0, pet, pet, pet_state, pet, "Commodore Business Machines", "CBM 30xx", GAME_NO_SOUND) COMP(1979, cbm30b, pet2001, 0, petb, petb, pet_state, pet, "Commodore Business Machines", "CBM 30xx (Business keyboard)", GAME_NO_SOUND) COMP(1979, cbm30nor, pet2001, 0, petb, petb, pet_state, pet, "Commodore Business Machines", "CBM 30xx (Norway, Business keyboard)", GAME_NO_SOUND) /* So called, THIN-40 */ COMP(1980, pet40on, pet2001, 0, pet, pet, pet_state, pet, "Commodore Business Machines", "PET 40xx (Basic 4, no CRTC, Normal keyboard)", GAME_NO_SOUND) COMP(1980, pet40ob, pet2001, 0, petb, petb, pet_state, pet, "Commodore Business Machines", "PET 40xx (Basic 4, no CRTC, Business keyboard)", GAME_NO_SOUND) COMP(1980, cbm40o, pet2001, 0, pet, pet, pet_state, pet, "Commodore Business Machines", "CBM 40xx (Basic 4, no CRTC, Normal keyboard)", GAME_NO_SOUND) COMP(1980, cbm40ob, pet2001, 0, petb, petb, pet_state, pet, "Commodore Business Machines", "CBM 40xx (Basic 4, no CRTC, Business keyboard)", GAME_NO_SOUND) COMP(1981, pet80, 0, 0, pet80, cbm8096, pet_state, pet80, "Commodore Business Machines", "PET 80xx (Basic 4, CRTC 60Hz, 80 columns)", GAME_NO_SOUND) COMP(1981, cbm80, pet80, 0, pet80pal, cbm8096, pet_state, pet80, "Commodore Business Machines", "CBM 80xx (Basic 4, CRTC 50Hz, 80 columns)", GAME_NO_SOUND) COMP(1981, cbm80ger, pet80, 0, pet80pal, cbm8096, pet_state, pet80, "Commodore Business Machines", "CBM 80xx (Germany, Basic 4, CRTC 50Hz, 80 columns)", GAME_NO_SOUND) COMP(1981, cbm80hun, pet80, 0, pet80pal, cbm8096, pet_state, pet80, "Commodore Business Machines", "CBM 80xx (Hungary, Basic 4, CRTC 50Hz, 80 columns)", GAME_NO_SOUND) COMP(1981, cbm80swe, pet80, 0, pet80pal, cbm8096, pet_state, pet80, "Commodore Business Machines", "CBM 80xx (Sweden, Basic 4, CRTC 50Hz, 80 columns)", GAME_NO_SOUND) /* So called, FAT-40 */ COMP(1981, pet40b, pet80, 0, pet80, cbm8096, pet_state, pet80, "Commodore Business Machines", "PET 40xx (Basic 4, CRTC 60Hz, 80 columns)", GAME_NO_SOUND) COMP(1981, pet40n, pet2001, 0, pet40, pet, pet_state, pet, "Commodore Business Machines", "PET 40xx (Basic 4, CRTC 60Hz, 40 columns)", GAME_NO_SOUND) COMP(1981, cbm40b, pet80, 0, pet80pal, cbm8096, pet_state, pet80, "Commodore Business Machines", "CBM 40xx (Basic 4, CRTC 50Hz, 80 columns)", GAME_NO_SOUND) COMP(1981, cbm40n, pet2001, 0, pet40pal, pet, pet_state, pet, "Commodore Business Machines", "CBM 40xx (Basic 4, CRTC 50Hz, 40 columns)", GAME_NO_SOUND) COMP(1981, superpet, 0, 0, superpet, superpet, pet_state, superpet,"Commodore Business Machines", "SuperPET (CRTC 50Hz)", GAME_NO_SOUND | GAME_NOT_WORKING) COMP(1981, sp9000, superpet, 0, superpet, superpet, pet_state, superpet,"Commodore Business Machines", "CBM SP9000 / MicroMainFrame 9000 (CRTC 50Hz)", GAME_NO_SOUND | GAME_NOT_WORKING) COMP(198?, mmf9000s, superpet, 0, superpet, superpet, pet_state, superpet,"Commodore Business Machines", "MicroMainFrame 9000 (Sweden, CRTC 50Hz)", GAME_NO_SOUND | GAME_NOT_WORKING) COMP(1984, cbm8296, pet80, 0, pet80pal, cbm8096, pet_state, pet80, "Commodore Business Machines", "CBM 8296 (Basic 4, CRTC 50Hz, 80 columns)", GAME_NO_SOUND) COMP(1984, cbm8296d, pet80, 0, pet80pal, cbm8096, pet_state, pet80, "Commodore Business Machines", "CBM 8296D", GAME_NO_SOUND)