mame/src/emu/cpu/m6502/m4510.c

556 lines
19 KiB
C

/*****************************************************************************
*
* m4510.c
* Portable 4510 emulator V1.0beta1
*
* Copyright Peter Trauner, all rights reserved
* documentation preliminary databook
* documentation by michael steil mist@c64.org
* available at ftp://ftp.funet.fi/pub/cbm/c65
*
* - This source code is released as freeware for non-commercial purposes.
* - You are free to use and redistribute this code in modified or
* unmodified form, provided you list me in the credits.
* - If you modify this source code, you must add a notice to each modified
* source file that it has been changed. If you're a nice person, you
* will clearly mark each change too. :)
* - If you wish to use this for commercial purposes, please contact me at
* pullmoll@t-online.de
* - The author of this copywritten work reserves the right to change the
* terms of its usage and license at any time, including retroactively
* - This entire notice must remain in the source code.
*
*****************************************************************************/
/*
c65 memory management
(reset)
c64 ff
c65 20 (interface)
a (c65 mode)
a:00 x:e3 y:00 z:b3
c65 64 (interface)
c64 ff
b (c65 dosmode?)
c65 65 (interface, full colorram)
a:00 x:11 y:80 z:31
c64 ff
c (?)
c64 07
a:00 x:00 y:00 z:00
a c65 mode
diskcontroller accesses
monitor
c64 ff
a:a0 x:82 y:00 z:83
c64 mode
c65 0
c65 2f:0 !
c64 ff
a:00 x:00 y:00 z:00
internal 8 mb to 64k switching (jmp routine in rom)
( seams to be incomplete, in chapter 1 1megabyte memory mapper )
a x y z
g 0 00 e0 00 f0
g 10000 00 e1 00 f1
g 20000 00 e2 00 f2
g 30000 00 e3 00 f3
g 40000 00 e4 00 f4
g 50000 00 e5 00 f5
g 60000 00 e6 00 f6
.
.
g f0000 00 ef 00 ff
the same for 100000 .. 700000
g 800000 00 e3 00 b3
thesis:
a: ?0?0 0000
? ? only in monitor mode set
x: xxxx address bits a19 .. a16 for memory accesses with a15 0 ?
0000 c64 mode
0001 dosmode
1110 c65 mode, plain ram access
(0000-1fff contains the switching code, so not switchable!?)
1000 monitor
1 map 6000-7fff
1 map 4000-5fff
1 map 2000-3fff
1 map 0000-1fff
y: ?000 0000
? only in dos mode set
z: xxxx address bits a19 .. a16 for memory accesses with a15 1 ?
0000 c64 mode
0011 dosmode
1000 monitor
1011 c65 mode
1111 plain ram access
1 map e000-ffff
1 map c000-dfff
1 map a000-bfff
1 map 8000-9fff
*/
#include "emu.h"
#include "debugger.h"
#include "m6502.h"
#include "m4510.h"
#include "minc4510.h"
#include "opsce02.h"
#include "ops4510.h"
#define M6502_NMI_VEC 0xfffa
#define M6502_RST_VEC 0xfffc
#define M6502_IRQ_VEC 0xfffe
#define M4510_RST_VEC M6502_RST_VEC
#define M4510_IRQ_VEC M6502_IRQ_VEC
#define M4510_NMI_VEC M6502_NMI_VEC
#define VERBOSE 0
#define LOG(x) do { if (VERBOSE) logerror x; } while (0)
typedef struct _m4510_Regs m4510_Regs;
struct _m4510_Regs {
void (*const *insn)(m4510_Regs *); /* pointer to the function pointer table */
PAIR ppc; /* previous program counter */
PAIR pc; /* program counter */
PAIR sp; /* stack pointer (always 100 - 1FF) */
PAIR zp; /* zero page address */
/* contains B register zp.b.h */
PAIR ea; /* effective address */
UINT8 a; /* Accumulator */
UINT8 x; /* X index register */
UINT8 y; /* Y index register */
UINT8 z; /* Z index register */
UINT8 p; /* Processor status */
UINT8 interrupt_inhibit; /* Some instructions, like MAP, inhibit interrupt */
UINT8 pending_irq; /* nonzero if an IRQ is pending */
UINT8 after_cli; /* pending IRQ and last insn cleared I */
UINT8 nmi_state;
UINT8 irq_state;
UINT16 low, high;
UINT32 mem[8];
device_irq_callback irq_callback;
cpu_device *device;
const address_space *space;
int icount;
read8_space_func rdmem_id; /* readmem callback for indexed instructions */
write8_space_func wrmem_id; /* writemem callback for indexed instructions */
UINT8 ddr;
UINT8 port;
m6510_port_read_func port_read;
m6510_port_write_func port_write;
};
INLINE m4510_Regs *get_safe_token(running_device *device)
{
assert(device != NULL);
assert(device->type() == CPU);
assert(cpu_get_type(device) == CPU_M4510);
return (m4510_Regs *)downcast<cpu_device *>(device)->token();
}
/***************************************************************
* include the opcode macros, functions and tables
***************************************************************/
INLINE int m4510_cpu_readop(m4510_Regs *cpustate)
{
register UINT16 t=cpustate->pc.w.l++;
return memory_decrypted_read_byte(cpustate->space, M4510_MEM(t));
}
INLINE int m4510_cpu_readop_arg(m4510_Regs *cpustate)
{
register UINT16 t=cpustate->pc.w.l++;
return memory_raw_read_byte(cpustate->space, M4510_MEM(t));
}
#define M4510
#include "t65ce02.c"
static UINT8 default_rdmem_id(const address_space *space, offs_t address)
{
m4510_Regs *cpustate = get_safe_token(space->cpu);
return memory_read_byte_8le(space, M4510_MEM(address));
}
static void default_wrmem_id(const address_space *space, offs_t address, UINT8 data)
{
m4510_Regs *cpustate = get_safe_token(space->cpu);
memory_write_byte_8le(space, M4510_MEM(address), data);
}
static CPU_INIT( m4510 )
{
m4510_Regs *cpustate = get_safe_token(device);
const m6502_interface *intf = (const m6502_interface *)device->baseconfig().static_config();
cpustate->interrupt_inhibit = 0;
cpustate->rdmem_id = default_rdmem_id;
cpustate->wrmem_id = default_wrmem_id;
cpustate->port_read = NULL;
cpustate->port_write = NULL;
cpustate->irq_callback = irqcallback;
cpustate->device = device;
cpustate->space = device->space(AS_PROGRAM);
if ( intf )
{
if ( intf->read_indexed_func )
cpustate->rdmem_id = intf->read_indexed_func;
if ( intf->write_indexed_func )
cpustate->wrmem_id = intf->write_indexed_func;
if ( intf->port_read_func )
cpustate->port_read = intf->port_read_func;
if ( intf->port_write_func )
cpustate->port_write = intf->port_write_func;
}
}
static CPU_RESET( m4510 )
{
m4510_Regs *cpustate = get_safe_token(device);
cpustate->insn = insn4510;
/* wipe out the rest of the m65ce02 structure */
/* read the reset vector into PC */
/* reset z index and b bank */
PCL = RDMEM(M4510_RST_VEC);
PCH = RDMEM(M4510_RST_VEC+1);
/* after reset in 6502 compatibility mode */
cpustate->sp.d = 0x01ff; /* high byte descriped in databook */
cpustate->z = 0;
B = 0;
cpustate->p = F_E|F_B|F_I|F_Z; /* set E, I and Z flags */
cpustate->interrupt_inhibit = 0;
cpustate->pending_irq = 0; /* nonzero if an IRQ is pending */
cpustate->after_cli = 0; /* pending IRQ and last insn cleared I */
cpustate->irq_callback = NULL;
/* don't know */
cpustate->high=0x8200;
cpustate->mem[7]=0x20000;
cpustate->port = 0xff;
cpustate->ddr = 0x00;
}
static CPU_EXIT( m4510 )
{
/* nothing to do yet */
}
INLINE void m4510_take_irq(m4510_Regs *cpustate)
{
if(( !(P & F_I) ) && (cpustate->interrupt_inhibit == 0))
{
EAD = M4510_IRQ_VEC;
cpustate->icount -= 7;
PUSH(PCH);
PUSH(PCL);
PUSH(P & ~F_B);
P = (P & ~F_D) | F_I; /* knock out D and set I flag */
PCL = RDMEM(EAD);
PCH = RDMEM(EAD+1);
LOG(("M4510 '%s' takes IRQ ($%04x)\n", cpustate->device->tag(), PCD));
/* call back the cpuintrf to let it clear the line */
if (cpustate->irq_callback) (*cpustate->irq_callback)(cpustate->device, 0);
}
cpustate->pending_irq = 0;
}
static CPU_EXECUTE( m4510 )
{
m4510_Regs *cpustate = get_safe_token(device);
do
{
UINT8 op;
PPC = PCD;
debugger_instruction_hook(device, PCD);
/* if an irq is pending, take it now */
if( cpustate->pending_irq )
m4510_take_irq(cpustate);
op = RDOP();
(*insn4510[op])(cpustate);
/* check if the I flag was just reset (interrupts enabled) */
if( cpustate->after_cli )
{
LOG(("M4510 '%s' after_cli was >0", cpustate->device->tag()));
cpustate->after_cli = 0;
if (cpustate->irq_state != CLEAR_LINE)
{
LOG((": irq line is asserted: set pending IRQ\n"));
cpustate->pending_irq = 1;
}
else
{
LOG((": irq line is clear\n"));
}
}
else
if( cpustate->pending_irq )
m4510_take_irq(cpustate);
} while (cpustate->icount > 0);
}
static void m4510_set_irq_line(m4510_Regs *cpustate, int irqline, int state)
{
if (irqline == INPUT_LINE_NMI)
{
if (cpustate->nmi_state == state) return;
cpustate->nmi_state = state;
if( state != CLEAR_LINE )
{
LOG(("M4510 '%s' set_nmi_line(ASSERT)\n", cpustate->device->tag()));
EAD = M4510_NMI_VEC;
cpustate->icount -= 7;
PUSH(PCH);
PUSH(PCL);
PUSH(P & ~F_B);
P = (P & ~F_D) | F_I; /* knock out D and set I flag */
PCL = RDMEM(EAD);
PCH = RDMEM(EAD+1);
LOG(("M4510 '%s' takes NMI ($%04x)\n", cpustate->device->tag(), PCD));
}
}
else
{
cpustate->irq_state = state;
if( state != CLEAR_LINE )
{
LOG(("M4510 '%s' set_irq_line(ASSERT)\n", cpustate->device->tag()));
cpustate->pending_irq = 1;
}
}
}
UINT8 m4510_get_port(cpu_device *device)
{
m4510_Regs *cpustate = get_safe_token(device);
return (cpustate->port & cpustate->ddr) | (cpustate->ddr ^ 0xff);
}
static READ8_HANDLER( m4510_read_0000 )
{
UINT8 result = 0x00;
m4510_Regs *cpustate = get_safe_token(space->cpu);
switch(offset)
{
case 0x0000: /* DDR */
result = cpustate->ddr;
break;
case 0x0001: /* Data Port */
if (cpustate->port_read)
result = cpustate->port_read(cpustate->device, 0);
result = (cpustate->ddr & cpustate->port) | (~cpustate->ddr & result);
break;
}
return result;
}
static WRITE8_HANDLER( m4510_write_0000 )
{
m4510_Regs *cpustate = get_safe_token(space->cpu);
switch(offset)
{
case 0x0000: /* DDR */
cpustate->ddr = data;
break;
case 0x0001: /* Data Port */
cpustate->port = data;
break;
}
if (cpustate->port_write)
cpustate->port_write(cpustate->device, 0, m4510_get_port(downcast<cpu_device *>(space->cpu)));
}
static ADDRESS_MAP_START(m4510_mem, ADDRESS_SPACE_PROGRAM, 8)
AM_RANGE(0x0000, 0x0001) AM_READWRITE(m4510_read_0000, m4510_write_0000)
ADDRESS_MAP_END
static CPU_TRANSLATE( m4510 )
{
m4510_Regs *cpustate = get_safe_token(device);
if (space == ADDRESS_SPACE_PROGRAM)
*address = M4510_MEM(*address);
return TRUE;
}
/**************************************************************************
* Generic set_info
**************************************************************************/
static CPU_SET_INFO( m4510 )
{
m4510_Regs *cpustate = get_safe_token(device);
switch (state)
{
/* --- the following bits of info are set as 64-bit signed integers --- */
case CPUINFO_INT_INPUT_STATE + M4510_IRQ_LINE: m4510_set_irq_line(cpustate, M4510_IRQ_LINE, info->i); break;
case CPUINFO_INT_INPUT_STATE + INPUT_LINE_NMI: m4510_set_irq_line(cpustate, INPUT_LINE_NMI, info->i); break;
case CPUINFO_INT_PC: PCW = info->i; break;
case CPUINFO_INT_REGISTER + M4510_PC: cpustate->pc.w.l = info->i; break;
case CPUINFO_INT_SP: SPL = info->i; break;
case CPUINFO_INT_REGISTER + M4510_S: cpustate->sp.b.l = info->i; break;
case CPUINFO_INT_REGISTER + M4510_P: cpustate->p = info->i; break;
case CPUINFO_INT_REGISTER + M4510_A: cpustate->a = info->i; break;
case CPUINFO_INT_REGISTER + M4510_X: cpustate->x = info->i; break;
case CPUINFO_INT_REGISTER + M4510_Y: cpustate->y = info->i; break;
case CPUINFO_INT_REGISTER + M4510_Z: cpustate->z = info->i; break;
case CPUINFO_INT_REGISTER + M4510_B: cpustate->zp.b.h = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM_LOW: cpustate->low = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM_HIGH: cpustate->high = info->i; break;
case CPUINFO_INT_REGISTER + M4510_EA: cpustate->ea.w.l = info->i; break;
case CPUINFO_INT_REGISTER + M4510_ZP: cpustate->zp.w.l = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM0: cpustate->mem[0] = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM1: cpustate->mem[1] = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM2: cpustate->mem[2] = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM3: cpustate->mem[3] = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM4: cpustate->mem[4] = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM5: cpustate->mem[5] = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM6: cpustate->mem[6] = info->i; break;
case CPUINFO_INT_REGISTER + M4510_MEM7: cpustate->mem[7] = info->i; break;
}
}
/**************************************************************************
* Generic get_info
**************************************************************************/
CPU_GET_INFO( m4510 )
{
m4510_Regs *cpustate = (device != NULL && device->token() != NULL) ? get_safe_token(device) : NULL;
switch (state)
{
/* --- the following bits of info are returned as 64-bit signed integers --- */
case CPUINFO_INT_CONTEXT_SIZE: info->i = sizeof(m4510_Regs); break;
case CPUINFO_INT_INPUT_LINES: info->i = 2; break;
case CPUINFO_INT_DEFAULT_IRQ_VECTOR: info->i = 0; break;
case DEVINFO_INT_ENDIANNESS: info->i = ENDIANNESS_LITTLE; break;
case CPUINFO_INT_CLOCK_MULTIPLIER: info->i = 1; break;
case CPUINFO_INT_CLOCK_DIVIDER: info->i = 1; break;
case CPUINFO_INT_MIN_INSTRUCTION_BYTES: info->i = 1; break;
case CPUINFO_INT_MAX_INSTRUCTION_BYTES: info->i = 3; break;
case CPUINFO_INT_MIN_CYCLES: info->i = 1; break;
case CPUINFO_INT_MAX_CYCLES: info->i = 10; break;
case DEVINFO_INT_DATABUS_WIDTH + ADDRESS_SPACE_PROGRAM: info->i = 8; break;
case DEVINFO_INT_ADDRBUS_WIDTH + ADDRESS_SPACE_PROGRAM: info->i = 20; break;
case DEVINFO_INT_ADDRBUS_SHIFT + ADDRESS_SPACE_PROGRAM: info->i = 0; break;
case CPUINFO_INT_LOGADDR_WIDTH_PROGRAM: info->i = 16; break;
case CPUINFO_INT_PAGE_SHIFT_PROGRAM: info->i = 13; break;
case DEVINFO_INT_DATABUS_WIDTH + ADDRESS_SPACE_DATA: info->i = 0; break;
case DEVINFO_INT_ADDRBUS_WIDTH + ADDRESS_SPACE_DATA: info->i = 0; break;
case DEVINFO_INT_ADDRBUS_SHIFT + ADDRESS_SPACE_DATA: info->i = 0; break;
case DEVINFO_INT_DATABUS_WIDTH + ADDRESS_SPACE_IO: info->i = 0; break;
case DEVINFO_INT_ADDRBUS_WIDTH + ADDRESS_SPACE_IO: info->i = 0; break;
case DEVINFO_INT_ADDRBUS_SHIFT + ADDRESS_SPACE_IO: info->i = 0; break;
case CPUINFO_INT_INPUT_STATE + M4510_IRQ_LINE: info->i = cpustate->irq_state; break;
case CPUINFO_INT_INPUT_STATE + INPUT_LINE_NMI: info->i = cpustate->nmi_state; break;
case CPUINFO_INT_PREVIOUSPC: info->i = cpustate->ppc.w.l; break;
case CPUINFO_INT_PC: info->i = PCD; break;
case CPUINFO_INT_REGISTER + M4510_PC: info->i = cpustate->pc.w.l; break;
case CPUINFO_INT_SP: info->i = SPL; break;
case CPUINFO_INT_REGISTER + M4510_S: info->i = cpustate->sp.b.l; break;
case CPUINFO_INT_REGISTER + M4510_P: info->i = cpustate->p; break;
case CPUINFO_INT_REGISTER + M4510_A: info->i = cpustate->a; break;
case CPUINFO_INT_REGISTER + M4510_X: info->i = cpustate->x; break;
case CPUINFO_INT_REGISTER + M4510_Y: info->i = cpustate->y; break;
case CPUINFO_INT_REGISTER + M4510_Z: info->i = cpustate->z; break;
case CPUINFO_INT_REGISTER + M4510_B: info->i = cpustate->zp.b.h; break;
case CPUINFO_INT_REGISTER + M4510_MEM_LOW: info->i = cpustate->low; break;
case CPUINFO_INT_REGISTER + M4510_MEM_HIGH: info->i = cpustate->high; break;
case CPUINFO_INT_REGISTER + M4510_EA: info->i = cpustate->ea.w.l; break;
case CPUINFO_INT_REGISTER + M4510_ZP: info->i = cpustate->zp.w.l; break;
case CPUINFO_INT_REGISTER + M4510_MEM0: info->i = cpustate->mem[0]; break;
case CPUINFO_INT_REGISTER + M4510_MEM1: info->i = cpustate->mem[1]; break;
case CPUINFO_INT_REGISTER + M4510_MEM2: info->i = cpustate->mem[2]; break;
case CPUINFO_INT_REGISTER + M4510_MEM3: info->i = cpustate->mem[3]; break;
case CPUINFO_INT_REGISTER + M4510_MEM4: info->i = cpustate->mem[4]; break;
case CPUINFO_INT_REGISTER + M4510_MEM5: info->i = cpustate->mem[5]; break;
case CPUINFO_INT_REGISTER + M4510_MEM6: info->i = cpustate->mem[6]; break;
case CPUINFO_INT_REGISTER + M4510_MEM7: info->i = cpustate->mem[7]; break;
/* --- the following bits of info are returned as pointers to data or functions --- */
case CPUINFO_FCT_SET_INFO: info->setinfo = CPU_SET_INFO_NAME(m4510); break;
case CPUINFO_FCT_INIT: info->init = CPU_INIT_NAME(m4510); break;
case CPUINFO_FCT_RESET: info->reset = CPU_RESET_NAME(m4510); break;
case CPUINFO_FCT_EXIT: info->exit = CPU_EXIT_NAME(m4510); break;
case CPUINFO_FCT_EXECUTE: info->execute = CPU_EXECUTE_NAME(m4510); break;
case CPUINFO_FCT_BURN: info->burn = NULL; break;
case CPUINFO_FCT_DISASSEMBLE: info->disassemble = CPU_DISASSEMBLE_NAME(m4510); break;
case CPUINFO_PTR_INSTRUCTION_COUNTER: info->icount = &cpustate->icount; break;
case DEVINFO_PTR_INTERNAL_MEMORY_MAP + ADDRESS_SPACE_PROGRAM: info->internal_map8 = ADDRESS_MAP_NAME(m4510_mem); break;
case CPUINFO_FCT_TRANSLATE: info->translate = CPU_TRANSLATE_NAME(m4510); break;
/* --- the following bits of info are returned as NULL-terminated strings --- */
case DEVINFO_STR_NAME: strcpy(info->s, "M4510"); break;
case DEVINFO_STR_FAMILY: strcpy(info->s, "CBM Semiconductor Group CSG 65CE02"); break;
case DEVINFO_STR_VERSION: strcpy(info->s, "1.0beta"); break;
case DEVINFO_STR_SOURCE_FILE: strcpy(info->s, __FILE__); break;
case DEVINFO_STR_CREDITS: strcpy(info->s, "Copyright Juergen Buchmueller\nCopyright Peter Trauner\nall rights reserved."); break;
case CPUINFO_STR_FLAGS:
sprintf(info->s, "%c%c%c%c%c%c%c%c",
cpustate->p & 0x80 ? 'N':'.',
cpustate->p & 0x40 ? 'V':'.',
cpustate->p & 0x20 ? 'R':'.',
cpustate->p & 0x10 ? 'B':'.',
cpustate->p & 0x08 ? 'D':'.',
cpustate->p & 0x04 ? 'I':'.',
cpustate->p & 0x02 ? 'Z':'.',
cpustate->p & 0x01 ? 'C':'.');
break;
case CPUINFO_STR_REGISTER + M4510_PC: sprintf(info->s, "PC:%04X", cpustate->pc.w.l); break;
case CPUINFO_STR_REGISTER + M4510_S: sprintf(info->s, "S:%02X", cpustate->sp.b.l); break;
case CPUINFO_STR_REGISTER + M4510_P: sprintf(info->s, "P:%02X", cpustate->p); break;
case CPUINFO_STR_REGISTER + M4510_A: sprintf(info->s, "A:%02X", cpustate->a); break;
case CPUINFO_STR_REGISTER + M4510_X: sprintf(info->s, "X:%02X", cpustate->x); break;
case CPUINFO_STR_REGISTER + M4510_Y: sprintf(info->s, "Y:%02X", cpustate->y); break;
case CPUINFO_STR_REGISTER + M4510_Z: sprintf(info->s, "Z:%02X", cpustate->z); break;
case CPUINFO_STR_REGISTER + M4510_B: sprintf(info->s, "B:%02X", cpustate->zp.b.h); break;
case CPUINFO_STR_REGISTER + M4510_MEM_LOW: sprintf(info->s, "M0:%01X", cpustate->low); break;
case CPUINFO_STR_REGISTER + M4510_MEM_HIGH: sprintf(info->s, "M1:%01X", cpustate->high); break;
case CPUINFO_STR_REGISTER + M4510_EA: sprintf(info->s, "EA:%04X", cpustate->ea.w.l); break;
case CPUINFO_STR_REGISTER + M4510_ZP: sprintf(info->s, "ZP:%03X", cpustate->zp.w.l); break;
}
}