Sprinter/mame
2
0
Fork 0
mirror of https://github.com/holub/mame synced 2025-05-21 21:29:15 +03:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
31257a208a
mame/src/mess/drivers/kyocera.c
Curt Coder f12ca5dc6a Fixed regression. (nw)
2013-02-02 16:52:35 +00:00

1582 lines
54 KiB
C
Raw Blame History

/******************************************************************************************
Kyocera Kyotronics 85 (and similar laptop computers)
2009/04 Very Preliminary Driver (video emulation courtesy of very old code by
Hamish Coleman)
Comments about bit usage from Tech References and Virtual T source.
Supported systems:
- Kyosei Kyotronic 85
- Olivetti M10 (slightly diff hw, BIOS is shifted by 2 words)
- NEC PC-8201A (slightly diff hw)
- TRS-80 Model 100
- Tandy Model 102 (slightly diff hw)
- Tandy Model 200 (diff video & rtc)
To Do:
- Find dumps of systems which could easily be added:
* Olivetti M10 Modem (US) (diff BIOS than the European version)
* NEC PC-8201 (original Japanese version of PC-8201A)
* NEC PC-8300 (similar hardware to PC-8201)
* NEC PC-8300 w/BradyWriter II ROMs
******************************************************************************************/
/*
TODO:
- un-Y2K-hack tandy200
- keyboard is unresponsive for couple of seconds after boot
- soft power on/off
- IM6042 UART
- pc8201 48K RAM option
- pc8201 NEC PC-8241A video interface (TMS9918, 16K videoRAM, 8K ROM)
- pc8201 NEC PC-8233 floppy controller
- pc8201 NEC floppy disc drives (PC-8031-1W, PC-8031-2W, PC-80S31)
- trsm100 Tandy Portable Disk Drive (TPDD: 100k 3?", TPDD2: 200k 3?") (undumped HD63A01V1 MCU + full custom uPD65002, serial comms via the missing IM6042, not going to happen anytime soon)
- trsm100 Chipmunk disk drive (384k 3?") (full custom logic, not going to happen)
- trsm100 RS232/modem select
- tandy200 UART8251
- tandy200 RTC alarm
- tandy200 TCM5089 DTMF sound
- international keyboard option ROMs
*/
/*
* PC-8201/8300 HARDWARE PORT DEFINITIONS *
-Port-
Name Hex Dec Notes
-------- --- --- -----------------------------------------
A8255 070 112 Video interface port A (8255)
B8255 071 113 Video interface port B (8255)
C8255 072 114 Video interface port C (8255)
CW8255 073 115 Video interface command/mode port (8255)
*/
#include "includes/kyocera.h"
/* Read/Write Handlers */
READ8_MEMBER( pc8201_state::bank_r )
{
/*
bit signal description
0 LADR1 select address 0 to 7fff
1 LADR2 select address 0 to 7fff
2 HADR1 select address 8000 to ffff
3 HADR2 select address 8000 to ffff
4
5
6 SELB serial interface status bit 1
7 SELA serial interface status bit 0
*/
return (m_iosel << 5) | m_bank;
}
void pc8201_state::bankswitch(UINT8 data)
{
address_space &program = m_maincpu->space(AS_PROGRAM);
int rom_bank = data & 0x03;
int ram_bank = (data >> 2) & 0x03;
m_bank = data & 0x0f;
if (rom_bank > 1)
{
/* RAM */
program.install_readwrite_bank(0x0000, 0x7fff, "bank1");
}
else
{
/* ROM */
program.install_read_bank(0x0000, 0x7fff, "bank1");
program.unmap_write(0x0000, 0x7fff);
}
membank("bank1")->set_entry(rom_bank);
switch (ram_bank)
{
case 0:
if (m_ram->size() > 16 * 1024)
{
program.install_readwrite_bank(0x8000, 0xffff, "bank2");
}
else
{
program.unmap_readwrite(0x8000, 0xbfff);
program.install_readwrite_bank(0xc000, 0xffff, "bank2");
}
break;
case 1:
program.unmap_readwrite(0x8000, 0xffff);
break;
case 2:
if (m_ram->size() > 32 * 1024)
program.install_readwrite_bank(0x8000, 0xffff, "bank2");
else
program.unmap_readwrite(0x8000, 0xffff);
break;
case 3:
if (m_ram->size() > 64 * 1024)
program.install_readwrite_bank(0x8000, 0xffff, "bank2");
else
program.unmap_readwrite(0x8000, 0xffff);
break;
}
membank("bank2")->set_entry(ram_bank);
}
WRITE8_MEMBER( pc8201_state::bank_w )
{
/*
bit signal description
0 LADR1 select address 0 to 7fff
1 LADR2 select address 0 to 7fff
2 HADR1 select address 8000 to ffff
3 HADR2 select address 8000 to ffff
4
5
6
7
*/
bankswitch(data);
}
WRITE8_MEMBER( pc8201_state::scp_w )
{
/*
bit signal description
0
1
2
3 REMOTE cassette motor
4 TSTB RTC strobe
5 PSTB printer strobe
6 SELB serial interface select bit 1
7 SELA serial interface select bit 0
*/
/* cassette motor */
m_cassette->change_state(BIT(data,3) ? CASSETTE_MOTOR_ENABLED : CASSETTE_MOTOR_DISABLED, CASSETTE_MASK_MOTOR);
/* RTC strobe */
m_rtc->stb_w(BIT(data, 4));
/* printer strobe */
m_centronics->strobe_w(BIT(data, 5));
/* serial interface select */
m_iosel = data >> 5;
}
WRITE8_MEMBER( kc85_state::uart_ctrl_w )
{
/*
bit signal description
0 SBS stop bit select
1 EPE even parity enable
2 PI parity inhibit
3 CLS1 character length select bit 1
4 CLS2 character length select bit 2
5
6
7
*/
m_uart->sbs_w(BIT(data, 0));
m_uart->epe_w(BIT(data, 1));
m_uart->pi_w(BIT(data, 2));
m_uart->cls1_w(BIT(data, 3));
m_uart->cls2_w(BIT(data, 4));
m_uart->crl_w(1);
}
READ8_MEMBER( kc85_state::uart_status_r )
{
/*
bit signal description
0 CD carrier detect
1 OE overrun error
2 FE framing error
3 PE parity error
4 TBRE transmit buffer register empty
5 RP
6 +5V
7 _LPS low power sensor
*/
UINT8 data = 0x40;
// TODO carrier detect
// overrun error
data |= m_uart->oe_r() << 1;
// framing error
data |= m_uart->fe_r() << 2;
// parity error
data |= m_uart->pe_r() << 3;
// transmit buffer register empty
data |= m_uart->tbre_r() << 4;
// rp TODO
data |= 0x20;
// low power sensor
data |= BIT(m_battery->read(), 0) << 7;
return data;
}
READ8_MEMBER( pc8201_state::uart_status_r )
{
/*
bit signal description
0 _DCD/_RD data carrier detect / ring detect
1 OE overrun error
2 FE framing error
3 PE parity error
4 TBRE transmit buffer register empty
5 RP
6 +5V
7 _LPS low power signal
*/
UINT8 data = 0x40;
// TODO data carrier detect / ring detect
// overrun error
data |= m_uart->oe_r() << 1;
// framing error
data |= m_uart->fe_r() << 2;
// parity error
data |= m_uart->pe_r() << 3;
// transmit buffer register empty
data |= m_uart->tbre_r() << 4;
// rp TODO
data |= 0x20;
// low power sensor
data |= BIT(m_battery->read(), 0) << 7;
return data;
}
WRITE8_MEMBER( pc8201_state::romah_w )
{
/*
bit signal
0 A16
1 ROM SEL
2
3
4
5
6
7
*/
// ROM address bit 16
m_rom_addr = (BIT(data, 0) << 16) | (m_rom_addr & 0xffff);
// ROM select
m_rom_sel = BIT(data, 1);
}
WRITE8_MEMBER( pc8201_state::romal_w )
{
/*
bit signal
0 A0
1 A1
2 A2
3 A3
4 A4
5 A5
6 A6
7 A7
*/
m_rom_addr = (m_rom_addr & 0x1ff00) | data;
}
WRITE8_MEMBER( pc8201_state::romam_w )
{
/*
bit signal
0 A8
1 A9
2 A10
3 A11
4 A12
5 A13
6 A14
7 A15
*/
m_rom_addr = (m_rom_addr & 0x100ff) | (data << 8);
}
READ8_MEMBER( pc8201_state::romrd_r )
{
UINT8 data = 0xff;
if (m_rom_sel)
{
data = m_option->base()[m_rom_addr & 0x1ffff];
}
return data;
}
WRITE8_MEMBER( kc85_state::modem_w )
{
/*
bit signal description
0 telephone line signal selection relay output
1 EN MC14412 enable output
2
3
4
5
6
7
*/
//m_modem->en_w(BIT(data, 1));
}
WRITE8_MEMBER( kc85_state::ctrl_w )
{
/*
bit signal description
0 _STROM ROM selection (0=standard, 1=option)
1 _STROBE printer strobe output
2 STB RTC strobe output
3 _REMOTE cassette motor
4
5
6
7
*/
/* ROM bank selection */
membank("bank1")->set_entry(BIT(data, 0));
/* printer strobe */
m_centronics->strobe_w(BIT(data, 1));
/* RTC strobe */
m_rtc->stb_w(BIT(data, 2));
/* cassette motor */
m_cassette->change_state(BIT(data,3) ? CASSETTE_MOTOR_ENABLED : CASSETTE_MOTOR_DISABLED, CASSETTE_MASK_MOTOR);
}
READ8_MEMBER( kc85_state::keyboard_r )
{
UINT8 data = 0xff;
if (!BIT(m_keylatch, 0)) data &= m_y0->read();
if (!BIT(m_keylatch, 1)) data &= m_y1->read();
if (!BIT(m_keylatch, 2)) data &= m_y2->read();
if (!BIT(m_keylatch, 3)) data &= m_y3->read();
if (!BIT(m_keylatch, 4)) data &= m_y4->read();
if (!BIT(m_keylatch, 5)) data &= m_y5->read();
if (!BIT(m_keylatch, 6)) data &= m_y6->read();
if (!BIT(m_keylatch, 7)) data &= m_y7->read();
if (!BIT(m_keylatch, 8)) data &= m_y8->read();
return data;
}
void tandy200_state::bankswitch(UINT8 data)
{
address_space &program = m_maincpu->space(AS_PROGRAM);
int rom_bank = data & 0x03;
int ram_bank = (data >> 2) & 0x03;
m_bank = data & 0x0f;
if (rom_bank == 3)
{
/* invalid ROM bank */
program.unmap_readwrite(0x0000, 0x7fff);
}
else
{
program.install_read_bank(0x0000, 0x7fff, "bank1");
program.unmap_write(0x0000, 0x7fff);
membank("bank1")->set_entry(rom_bank);
}
if (m_ram->size() < ((ram_bank + 1) * 24 * 1024))
{
/* invalid RAM bank */
program.unmap_readwrite(0xa000, 0xffff);
}
else
{
program.install_readwrite_bank(0xa000, 0xffff, "bank2");
membank("bank2")->set_entry(ram_bank);
}
}
READ8_MEMBER( tandy200_state::bank_r )
{
return m_bank;
}
WRITE8_MEMBER( tandy200_state::bank_w )
{
bankswitch(data);
}
READ8_MEMBER( tandy200_state::stbk_r )
{
UINT8 data = 0xff;
if (!BIT(m_keylatch, 0)) data &= m_y0->read();
if (!BIT(m_keylatch, 1)) data &= m_y1->read();
if (!BIT(m_keylatch, 2)) data &= m_y2->read();
if (!BIT(m_keylatch, 3)) data &= m_y3->read();
if (!BIT(m_keylatch, 4)) data &= m_y4->read();
if (!BIT(m_keylatch, 5)) data &= m_y5->read();
if (!BIT(m_keylatch, 6)) data &= m_y6->read();
if (!BIT(m_keylatch, 7)) data &= m_y7->read();
if (!BIT(m_keylatch, 8)) data &= m_y8->read();
return data;
}
WRITE8_MEMBER( tandy200_state::stbk_w )
{
/*
bit signal description
0 _PSTB printer strobe output
1 REMOTE cassette motor
2
3
4
5
6
7
*/
/* printer strobe */
m_centronics->strobe_w(BIT(data, 0));
/* cassette motor */
m_cassette->change_state(BIT(data,1) ? CASSETTE_MOTOR_ENABLED : CASSETTE_MOTOR_DISABLED, CASSETTE_MASK_MOTOR);
}
READ8_MEMBER( kc85_state::lcd_r )
{
UINT8 data = 0;
data |= m_lcdc0->read(space, offset);
data |= m_lcdc1->read(space, offset);
data |= m_lcdc2->read(space, offset);
data |= m_lcdc3->read(space, offset);
data |= m_lcdc4->read(space, offset);
data |= m_lcdc5->read(space, offset);
data |= m_lcdc6->read(space, offset);
data |= m_lcdc7->read(space, offset);
data |= m_lcdc8->read(space, offset);
data |= m_lcdc9->read(space, offset);
return data;
}
WRITE8_MEMBER( kc85_state::lcd_w )
{
m_lcdc0->write(space, offset, data);
m_lcdc1->write(space, offset, data);
m_lcdc2->write(space, offset, data);
m_lcdc3->write(space, offset, data);
m_lcdc4->write(space, offset, data);
m_lcdc5->write(space, offset, data);
m_lcdc6->write(space, offset, data);
m_lcdc7->write(space, offset, data);
m_lcdc8->write(space, offset, data);
m_lcdc9->write(space, offset, data);
}
/* Memory Maps */
static ADDRESS_MAP_START( kc85_mem, AS_PROGRAM, 8, kc85_state )
ADDRESS_MAP_UNMAP_HIGH
AM_RANGE(0x0000, 0x7fff) AM_ROMBANK("bank1")
AM_RANGE(0x8000, 0xffff) AM_RAMBANK("bank2")
ADDRESS_MAP_END
static ADDRESS_MAP_START( pc8201_mem, AS_PROGRAM, 8, pc8201_state )
ADDRESS_MAP_UNMAP_HIGH
AM_RANGE(0x0000, 0x7fff) AM_RAMBANK("bank1")
AM_RANGE(0x8000, 0xffff) AM_RAMBANK("bank2")
ADDRESS_MAP_END
static ADDRESS_MAP_START( tandy200_mem, AS_PROGRAM, 8, tandy200_state )
ADDRESS_MAP_UNMAP_HIGH
AM_RANGE(0x0000, 0x7fff) AM_ROMBANK("bank1")
AM_RANGE(0x8000, 0x9fff) AM_ROM
AM_RANGE(0xa000, 0xffff) AM_RAMBANK("bank2")
ADDRESS_MAP_END
static ADDRESS_MAP_START( kc85_io, AS_IO, 8, kc85_state )
ADDRESS_MAP_UNMAP_HIGH
// AM_RANGE(0x70, 0x70) AM_MIRROR(0x0f) optional RAM unit
// AM_RANGE(0x80, 0x80) AM_MIRROR(0x0f) optional I/O controller unit
// AM_RANGE(0x90, 0x90) AM_MIRROR(0x0f) optional answering telephone unit
// AM_RANGE(0xa0, 0xa0) AM_MIRROR(0x0f) optional modem
AM_RANGE(0xb0, 0xb7) AM_MIRROR(0x08) AM_DEVREADWRITE(I8155_TAG, i8155_device, io_r, io_w)
AM_RANGE(0xc0, 0xc0) AM_MIRROR(0x0f) AM_DEVREADWRITE(IM6402_TAG, im6402_device, read, write)
AM_RANGE(0xd0, 0xd0) AM_MIRROR(0x0f) AM_READWRITE(uart_status_r, uart_ctrl_w)
AM_RANGE(0xe0, 0xe0) AM_MIRROR(0x0f) AM_READWRITE(keyboard_r, ctrl_w)
AM_RANGE(0xf0, 0xf1) AM_MIRROR(0x0e) AM_READWRITE(lcd_r, lcd_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( trsm100_io, AS_IO, 8, kc85_state )
AM_IMPORT_FROM(kc85_io)
AM_RANGE(0xa0, 0xa0) AM_MIRROR(0x0f) AM_WRITE(modem_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( pc8201_io, AS_IO, 8, pc8201_state )
ADDRESS_MAP_UNMAP_HIGH
// AM_RANGE(0x70, 0x70) AM_MIRROR(0x0f) optional video interface 8255
AM_RANGE(0x80, 0x80) AM_MIRROR(0x03) AM_WRITE(romah_w)
AM_RANGE(0x84, 0x84) AM_MIRROR(0x03) AM_WRITE(romal_w)
AM_RANGE(0x88, 0x88) AM_MIRROR(0x03) AM_WRITE(romam_w)
AM_RANGE(0x8c, 0x8c) AM_MIRROR(0x03) AM_READ(romrd_r)
AM_RANGE(0x90, 0x90) AM_MIRROR(0x0f) AM_WRITE(scp_w)
AM_RANGE(0xa0, 0xa0) AM_MIRROR(0x0f) AM_READWRITE(bank_r, bank_w)
AM_RANGE(0xb0, 0xb7) AM_MIRROR(0x08) AM_DEVREADWRITE(I8155_TAG, i8155_device, io_r, io_w)
AM_RANGE(0xc0, 0xc0) AM_MIRROR(0x0f) AM_DEVREADWRITE(IM6402_TAG, im6402_device, read, write)
AM_RANGE(0xd0, 0xd0) AM_MIRROR(0x0f) AM_READ(uart_status_r) AM_WRITE(uart_ctrl_w)
AM_RANGE(0xe0, 0xe0) AM_MIRROR(0x0f) AM_READ(keyboard_r)
AM_RANGE(0xf0, 0xf1) AM_MIRROR(0x0e) AM_READWRITE(lcd_r, lcd_w)
ADDRESS_MAP_END
static ADDRESS_MAP_START( tandy200_io, AS_IO, 8, tandy200_state )
ADDRESS_MAP_UNMAP_HIGH
AM_RANGE(0x90, 0x9f) AM_DEVREADWRITE(RP5C01A_TAG, rp5c01_device, read, write)
// AM_RANGE(0xa0, 0xa0) AM_MIRROR(0x0f) AM_DEVWRITE(TCM5089_TAG, write)
AM_RANGE(0xb0, 0xb7) AM_MIRROR(0x08) AM_DEVREADWRITE(I8155_TAG, i8155_device, io_r, io_w)
AM_RANGE(0xc0, 0xc0) AM_MIRROR(0x0e) AM_DEVREADWRITE(I8251_TAG, i8251_device, data_r, data_w)
AM_RANGE(0xc1, 0xc1) AM_MIRROR(0x0e) AM_DEVREADWRITE(I8251_TAG, i8251_device, status_r, control_w)
AM_RANGE(0xd0, 0xd0) AM_MIRROR(0x0f) AM_READWRITE(bank_r, bank_w)
AM_RANGE(0xe0, 0xe0) AM_MIRROR(0x0f) AM_READWRITE(stbk_r, stbk_w)
AM_RANGE(0xf0, 0xf0) AM_MIRROR(0x0e) AM_DEVREADWRITE(HD61830_TAG, hd61830_device, data_r, data_w)
AM_RANGE(0xf1, 0xf1) AM_MIRROR(0x0e) AM_DEVREADWRITE(HD61830_TAG, hd61830_device, status_r, control_w)
ADDRESS_MAP_END
/* Input Ports */
static INPUT_PORTS_START( kc85 )
PORT_START("Y0")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_L) PORT_CHAR('l') PORT_CHAR('L')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_M) PORT_CHAR('m') PORT_CHAR('M')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_N) PORT_CHAR('n') PORT_CHAR('N')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_B) PORT_CHAR('b') PORT_CHAR('B')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_V) PORT_CHAR('v') PORT_CHAR('V')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_C) PORT_CHAR('c') PORT_CHAR('C')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_X) PORT_CHAR('x') PORT_CHAR('X')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Z) PORT_CHAR('z') PORT_CHAR('Z')
PORT_START("Y1")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_K) PORT_CHAR('k') PORT_CHAR('K')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_J) PORT_CHAR('j') PORT_CHAR('J')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_H) PORT_CHAR('h') PORT_CHAR('H')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_G) PORT_CHAR('g') PORT_CHAR('G')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_F) PORT_CHAR('f') PORT_CHAR('F')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_D) PORT_CHAR('d') PORT_CHAR('D')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_S) PORT_CHAR('s') PORT_CHAR('S')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_A) PORT_CHAR('a') PORT_CHAR('A')
PORT_START("Y2")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_I) PORT_CHAR('i') PORT_CHAR('I')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_U) PORT_CHAR('u') PORT_CHAR('U')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Y) PORT_CHAR('y') PORT_CHAR('Y')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_T) PORT_CHAR('t') PORT_CHAR('T')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_R) PORT_CHAR('r') PORT_CHAR('R')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_E) PORT_CHAR('e') PORT_CHAR('E')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_W) PORT_CHAR('w') PORT_CHAR('W')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Q) PORT_CHAR('q') PORT_CHAR('Q')
PORT_START("Y3")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_SLASH) PORT_CHAR('/') PORT_CHAR('?')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR('>')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',') PORT_CHAR('<')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_QUOTE) PORT_CHAR('\'') PORT_CHAR('"')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_COLON) PORT_CHAR(';') PORT_CHAR(':')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('[') PORT_CHAR(']')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_P) PORT_CHAR('p') PORT_CHAR('P')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_O) PORT_CHAR('o') PORT_CHAR('O')
PORT_START("Y4")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('*')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('&')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_6) PORT_CHAR('6') PORT_CHAR('^')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_5) PORT_CHAR('5') PORT_CHAR('%')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_4) PORT_CHAR('4') PORT_CHAR('$')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_3) PORT_CHAR('3') PORT_CHAR('#')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_CHAR('@')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_1) PORT_CHAR('1') PORT_CHAR('!')
PORT_START("Y5")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_DOWN) PORT_CODE(KEYCODE_DOWN) PORT_CHAR(UCHAR_MAMEKEY(DOWN))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_UP) PORT_CODE(KEYCODE_UP) PORT_CHAR(UCHAR_MAMEKEY(UP))
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_RIGHT) PORT_CODE(KEYCODE_RIGHT) PORT_CHAR(UCHAR_MAMEKEY(RIGHT))
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_LEFT) PORT_CODE(KEYCODE_LEFT) PORT_CHAR(UCHAR_MAMEKEY(LEFT))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_EQUALS) PORT_CHAR('=') PORT_CHAR('+')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_MINUS) PORT_CHAR('-') PORT_CHAR('_')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_CHAR(')')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR('(')
PORT_START("Y6")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("ENTER") PORT_CODE(KEYCODE_ENTER) PORT_CHAR(13)
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PRINT") PORT_CODE(KEYCODE_F11) PORT_CHAR(UCHAR_MAMEKEY(F11))
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("LABEL") PORT_CODE(KEYCODE_F10) PORT_CHAR(UCHAR_MAMEKEY(F10))
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PASTE") PORT_CODE(KEYCODE_F9) PORT_CHAR(UCHAR_MAMEKEY(F9))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("ESC") PORT_CODE(KEYCODE_ESC) PORT_CHAR(UCHAR_MAMEKEY(ESC))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("\xE2\x86\x92|") PORT_CODE(KEYCODE_TAB) PORT_CHAR('\t')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("DEL BKSP") PORT_CODE(KEYCODE_BACKSPACE) PORT_CHAR(8)
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("SPACE") PORT_CODE(KEYCODE_SPACE) PORT_CHAR(' ')
PORT_START("Y7")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F8") PORT_CODE(KEYCODE_F8) PORT_CHAR(UCHAR_MAMEKEY(F8))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F7") PORT_CODE(KEYCODE_F7) PORT_CHAR(UCHAR_MAMEKEY(F7))
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F6") PORT_CODE(KEYCODE_F6) PORT_CHAR(UCHAR_MAMEKEY(F6))
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F5") PORT_CODE(KEYCODE_F5) PORT_CHAR(UCHAR_MAMEKEY(F5))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F4") PORT_CODE(KEYCODE_F4) PORT_CHAR(UCHAR_MAMEKEY(F4))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F3") PORT_CODE(KEYCODE_F3) PORT_CHAR(UCHAR_MAMEKEY(F3))
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F2") PORT_CODE(KEYCODE_F2) PORT_CHAR(UCHAR_MAMEKEY(F2))
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F1") PORT_CODE(KEYCODE_F1) PORT_CHAR(UCHAR_MAMEKEY(F1))
PORT_START("Y8")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PAUSE BREAK") PORT_CODE(KEYCODE_F12) PORT_CHAR(UCHAR_MAMEKEY(F12))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("CAPS LOCK") PORT_CODE(KEYCODE_CAPSLOCK) PORT_TOGGLE
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("NUM") PORT_CODE(KEYCODE_RCONTROL) PORT_CHAR(UCHAR_MAMEKEY(RCONTROL))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("CODE") PORT_CODE(KEYCODE_RALT) PORT_CHAR(UCHAR_MAMEKEY(RALT))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("GRAPH") PORT_CODE(KEYCODE_LALT) PORT_CHAR(UCHAR_MAMEKEY(LALT))
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("CTRL") PORT_CODE(KEYCODE_LCONTROL) PORT_CHAR(UCHAR_MAMEKEY(LCONTROL))
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("SHIFT") PORT_CODE(KEYCODE_LSHIFT) PORT_CODE(KEYCODE_RSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
PORT_START("BATTERY")
PORT_CONFNAME( 0x01, 0x01, "Battery Status" )
PORT_CONFSETTING( 0x01, DEF_STR( Normal ) )
PORT_CONFSETTING( 0x00, "Low Battery" )
INPUT_PORTS_END
static INPUT_PORTS_START( pc8201a )
PORT_INCLUDE( kc85 )
PORT_MODIFY("Y3")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_RCONTROL) PORT_CHAR(']') PORT_CHAR('}')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_SLASH) PORT_CHAR('/') PORT_CHAR('?')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR('>')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',') PORT_CHAR('<')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_CLOSEBRACE) PORT_CHAR('\\') PORT_CHAR('|')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('@') PORT_CHAR('^')
PORT_MODIFY("Y4")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('(')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('\'')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_6) PORT_CHAR('6') PORT_CHAR('&')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_CHAR('"')
PORT_MODIFY("Y5")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PAST INS") PORT_CODE(KEYCODE_INSERT) PORT_CHAR(UCHAR_MAMEKEY(INSERT))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("SPACE") PORT_CODE(KEYCODE_SPACE) PORT_CHAR(' ')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_RALT) PORT_CHAR('[') PORT_CHAR('{')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_MINUS) PORT_CHAR('-') PORT_CHAR('=')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_QUOTE) PORT_CHAR(':') PORT_CHAR('*')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_COLON) PORT_CHAR(';') PORT_CHAR('+')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_CHAR('_')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR(')')
PORT_MODIFY("Y6")
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("ESC") PORT_CODE(KEYCODE_ESC)
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("\xE2\x86\x92|") PORT_CODE(KEYCODE_TAB)
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_RIGHT) PORT_CODE(KEYCODE_RIGHT) PORT_CHAR(UCHAR_MAMEKEY(RIGHT))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_LEFT) PORT_CODE(KEYCODE_LEFT) PORT_CHAR(UCHAR_MAMEKEY(LEFT))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_DOWN) PORT_CODE(KEYCODE_DOWN) PORT_CHAR(UCHAR_MAMEKEY(DOWN))
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_UP) PORT_CODE(KEYCODE_UP) PORT_CHAR(UCHAR_MAMEKEY(UP))
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("DEL BKSP") PORT_CODE(KEYCODE_BACKSPACE) PORT_CHAR(8)
PORT_MODIFY("Y7")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("STOP") PORT_CODE(KEYCODE_F8) PORT_CHAR(UCHAR_MAMEKEY(F8))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("f.5") PORT_CODE(KEYCODE_F5) PORT_CHAR(UCHAR_MAMEKEY(F5))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("f.4") PORT_CODE(KEYCODE_F4) PORT_CHAR(UCHAR_MAMEKEY(F4))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("f.3") PORT_CODE(KEYCODE_F3) PORT_CHAR(UCHAR_MAMEKEY(F3))
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("f.2") PORT_CODE(KEYCODE_F2) PORT_CHAR(UCHAR_MAMEKEY(F2))
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("f.1") PORT_CODE(KEYCODE_F1) PORT_CHAR(UCHAR_MAMEKEY(F1))
PORT_MODIFY("Y8")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("CAPS LOCK") PORT_CODE(KEYCODE_CAPSLOCK) PORT_TOGGLE
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNUSED )
INPUT_PORTS_END
static INPUT_PORTS_START( olivm10 )
PORT_START("Y0")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_5) PORT_CHAR('5') PORT_CHAR('%')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_4) PORT_CHAR('4') PORT_CHAR('$')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_3) PORT_CHAR('3') PORT_CHAR('#')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_CHAR('"')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_1) PORT_CHAR('1') PORT_CHAR('!')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_TILDE) PORT_CHAR('[') PORT_CHAR('{')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_W) PORT_CHAR('w') PORT_CHAR('W')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Q) PORT_CHAR('q') PORT_CHAR('Q')
PORT_START("Y1")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_EQUALS) PORT_CHAR('^') PORT_CHAR('~')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_MINUS) PORT_CHAR('-') PORT_CHAR('=')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_CHAR('_')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR(')')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('(')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('\'')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_6) PORT_CHAR('6') PORT_CHAR('&')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Y) PORT_CHAR('y') PORT_CHAR('Y')
PORT_START("Y2")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_M) PORT_CHAR('m') PORT_CHAR('M')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',') PORT_CHAR('<')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR('>')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_SLASH) PORT_CHAR('/') PORT_CHAR('?')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_QUOTE) PORT_CHAR(':') PORT_CHAR('*')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_COLON) PORT_CHAR(';') PORT_CHAR('+')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('@') PORT_CHAR('`')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_CLOSEBRACE) PORT_CHAR(']') PORT_CHAR('}')
PORT_START("Y3")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_N) PORT_CHAR('n') PORT_CHAR('N')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_B) PORT_CHAR('b') PORT_CHAR('B')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_V) PORT_CHAR('v') PORT_CHAR('V')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_C) PORT_CHAR('c') PORT_CHAR('C')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_X) PORT_CHAR('x') PORT_CHAR('X')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Z) PORT_CHAR('z') PORT_CHAR('Z')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_BACKSLASH2) PORT_CHAR('\\') PORT_CHAR('|')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_A) PORT_CHAR('a') PORT_CHAR('A')
PORT_START("Y4")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_L) PORT_CHAR('l') PORT_CHAR('L')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_K) PORT_CHAR('k') PORT_CHAR('K')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_J) PORT_CHAR('j') PORT_CHAR('J')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_H) PORT_CHAR('h') PORT_CHAR('H')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_G) PORT_CHAR('g') PORT_CHAR('G')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_F) PORT_CHAR('f') PORT_CHAR('F')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_D) PORT_CHAR('d') PORT_CHAR('D')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_S) PORT_CHAR('s') PORT_CHAR('S')
PORT_START("Y5")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("SPACE") PORT_CODE(KEYCODE_SPACE) PORT_CHAR(' ')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_P) PORT_CHAR('p') PORT_CHAR('P')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_O) PORT_CHAR('o') PORT_CHAR('O')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_I) PORT_CHAR('i') PORT_CHAR('I')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_U) PORT_CHAR('u') PORT_CHAR('U')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_T) PORT_CHAR('t') PORT_CHAR('T')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_R) PORT_CHAR('r') PORT_CHAR('R')
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_E) PORT_CHAR('e') PORT_CHAR('E')
PORT_START("Y6")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PASTE") PORT_CODE(KEYCODE_F9) PORT_CHAR(UCHAR_MAMEKEY(F9))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("ENTER") PORT_CODE(KEYCODE_ENTER) PORT_CHAR(13)
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("\xE2\x86\x92|") PORT_CODE(KEYCODE_TAB) PORT_CHAR('\t')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("DEL BS") PORT_CODE(KEYCODE_BACKSPACE) PORT_CHAR(8)
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_DOWN) PORT_CODE(KEYCODE_DOWN) PORT_CHAR(UCHAR_MAMEKEY(DOWN))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_UP) PORT_CODE(KEYCODE_UP) PORT_CHAR(UCHAR_MAMEKEY(UP))
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_RIGHT) PORT_CODE(KEYCODE_RIGHT) PORT_CHAR(UCHAR_MAMEKEY(RIGHT))
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(UTF8_LEFT) PORT_CODE(KEYCODE_LEFT) PORT_CHAR(UCHAR_MAMEKEY(LEFT))
PORT_START("Y7")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F8") PORT_CODE(KEYCODE_F8) PORT_CHAR(UCHAR_MAMEKEY(F8))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F7") PORT_CODE(KEYCODE_F7) PORT_CHAR(UCHAR_MAMEKEY(F7))
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F6") PORT_CODE(KEYCODE_F6) PORT_CHAR(UCHAR_MAMEKEY(F6))
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F5") PORT_CODE(KEYCODE_F5) PORT_CHAR(UCHAR_MAMEKEY(F5))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F4") PORT_CODE(KEYCODE_F4) PORT_CHAR(UCHAR_MAMEKEY(F4))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F3") PORT_CODE(KEYCODE_F3) PORT_CHAR(UCHAR_MAMEKEY(F3))
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F2") PORT_CODE(KEYCODE_F2) PORT_CHAR(UCHAR_MAMEKEY(F2))
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F1") PORT_CODE(KEYCODE_F1) PORT_CHAR(UCHAR_MAMEKEY(F1))
PORT_START("Y8")
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PAUSE BREAK") PORT_CODE(KEYCODE_F12) PORT_CHAR(UCHAR_MAMEKEY(F12))
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("CAPS LOCK") PORT_CODE(KEYCODE_CAPSLOCK) PORT_TOGGLE
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("NUM") PORT_CODE(KEYCODE_RALT) PORT_CHAR(UCHAR_MAMEKEY(RALT))
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("GRAPH") PORT_CODE(KEYCODE_LALT) PORT_CHAR(UCHAR_MAMEKEY(LALT))
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("CTRL") PORT_CODE(KEYCODE_LCONTROL) PORT_CHAR(UCHAR_MAMEKEY(LCONTROL))
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("SHIFT") PORT_CODE(KEYCODE_LSHIFT) PORT_CODE(KEYCODE_RSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PRINT") PORT_CODE(KEYCODE_F11) PORT_CHAR(UCHAR_MAMEKEY(F11))
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("LABEL") PORT_CODE(KEYCODE_F10) PORT_CHAR(UCHAR_MAMEKEY(F10))
PORT_START("BATTERY")
PORT_CONFNAME( 0x01, 0x01, "Battery Status" )
PORT_CONFSETTING( 0x01, DEF_STR( Normal ) )
PORT_CONFSETTING( 0x00, "Low Battery" )
INPUT_PORTS_END
/* uPD1990A Interface */
static UPD1990A_INTERFACE( kc85_upd1990a_intf )
{
DEVCB_NULL,
DEVCB_CPU_INPUT_LINE(I8085_TAG, I8085_RST75_LINE)
};
/* RP5C01A Interface */
static RP5C01_INTERFACE( tandy200_rtc_intf )
{
DEVCB_NULL /* alarm */
};
/* 8155 Interface */
WRITE8_MEMBER( kc85_state::i8155_pa_w )
{
/*
bit description
0 LCD chip select 0, key scan 0, RTC C0
1 LCD chip select 1, key scan 1, RTC C1
2 LCD chip select 2, key scan 2, RTC C2
3 LCD chip select 3, key scan 3, RTC CLK
4 LCD chip select 4, key scan 4, RTC DATA IN
5 LCD chip select 5, key scan 5
6 LCD chip select 6, key scan 6
7 LCD chip select 7, key scan 7
*/
/* keyboard */
m_keylatch = (m_keylatch & 0x100) | data;
/* LCD */
m_lcdc0->cs2_w(BIT(data, 0));
m_lcdc1->cs2_w(BIT(data, 1));
m_lcdc2->cs2_w(BIT(data, 2));
m_lcdc3->cs2_w(BIT(data, 3));
m_lcdc4->cs2_w(BIT(data, 4));
m_lcdc5->cs2_w(BIT(data, 5));
m_lcdc6->cs2_w(BIT(data, 6));
m_lcdc7->cs2_w(BIT(data, 7));
/* RTC */
m_rtc->c0_w(BIT(data, 0));
m_rtc->c1_w(BIT(data, 1));
m_rtc->c2_w(BIT(data, 2));
m_rtc->clk_w(BIT(data, 3));
m_rtc->data_in_w(BIT(data, 4));
}
WRITE8_MEMBER( kc85_state::i8155_pb_w )
{
/*
bit signal description
0 LCD chip select 8, key scan 8
1 LCD chip select 9
2 _MC melody control output
3 DCD/_RD RS232 DCD/_RD select (0=RS232, 1=modem)
4 APO auto power off output
5 BELL buzzer output (0=ring, 1=not ring)
6 _DTR RS232 data terminal ready output
7 _RTS RS232 request to send output
*/
/* keyboard */
m_keylatch = (BIT(data, 0) << 8) | (m_keylatch & 0xff);
/* LCD */
m_lcdc8->cs2_w(BIT(data, 0));
m_lcdc9->cs2_w(BIT(data, 1));
/* beeper */
m_buzzer = BIT(data, 2);
m_bell = BIT(data, 5);
if (m_buzzer) speaker_level_w(m_speaker, m_bell);
}
READ8_MEMBER( kc85_state::i8155_pc_r )
{
/*
bit description
0 CDI clock data input
1 SLCT _BUSY signal from printer
2 BUSY BUSY signal from printer
3 BCR bar code reader data input
4 _CTS RS232 clear to send input
5 _DSR RS232 DSR input
*/
UINT8 data = 0;
// clock data input
data |= m_rtc->data_out_r();
// centronics busy
data |= m_centronics->not_busy_r() << 1;
data |= m_centronics->busy_r() << 2;
return data;
}
WRITE_LINE_MEMBER( kc85_state::i8155_to_w )
{
if (!m_buzzer && m_bell)
{
speaker_level_w(m_speaker, state);
}
m_uart->trc_w(state);
m_uart->rrc_w(state);
}
static I8155_INTERFACE( kc85_8155_intf )
{
DEVCB_NULL, /* port A read */
DEVCB_DRIVER_MEMBER(kc85_state, i8155_pa_w), /* port A write */
DEVCB_NULL, /* port B read */
DEVCB_DRIVER_MEMBER(kc85_state, i8155_pb_w), /* port B write */
DEVCB_DRIVER_MEMBER(kc85_state, i8155_pc_r), /* port C read */
DEVCB_NULL, /* port C write */
DEVCB_DRIVER_LINE_MEMBER(kc85_state, i8155_to_w) /* timer output */
};
WRITE8_MEMBER( tandy200_state::i8155_pa_w )
{
/*
bit description
0 print data 0, key scan 0
1 print data 1, key scan 1
2 print data 2, key scan 2
3 print data 3, key scan 3
4 print data 4, key scan 4
5 print data 5, key scan 5
6 print data 6, key scan 6
7 print data 7, key scan 7
*/
m_centronics->write(space, 0, data);
m_keylatch = (m_keylatch & 0x100) | data;
}
WRITE8_MEMBER( tandy200_state::i8155_pb_w )
{
/*
bit signal description
0 key scan 8
1 ORIG/ANS (1=ORIG, 0=ANS)
2 _BUZZER (0=data from 8155 TO, 1=data from PB2)
3 _RS232C (1=modem, 0=RS-232)
4 PCS power cut signal
5 BELL buzzer data output
6 MEN modem enable output
7 CALL connects and disconnects the phone line
*/
/* keyboard */
m_keylatch = (BIT(data, 0) << 8) | (m_keylatch & 0xff);
/* beeper */
m_buzzer = BIT(data, 2);
m_bell = BIT(data, 5);
if (m_buzzer) speaker_level_w(m_speaker, m_bell);
}
READ8_MEMBER( tandy200_state::i8155_pc_r )
{
/*
bit signal description
0 _LPS low power sense input
1 _BUSY not busy input
2 BUSY busy input
3 BCR bar code reader data input
4 CD carrier detect input
5 CDBD carrier detect break down input
*/
UINT8 data = 0x01;
data |= m_centronics->not_busy_r() << 1;
data |= m_centronics->busy_r() << 2;
return data;
}
WRITE_LINE_MEMBER( tandy200_state::i8155_to_w )
{
if (!m_buzzer && m_bell)
{
speaker_level_w(m_speaker, state);
}
}
static I8155_INTERFACE( tandy200_8155_intf )
{
DEVCB_NULL, /* port A read */
DEVCB_DRIVER_MEMBER(tandy200_state, i8155_pa_w), /* port A write */
DEVCB_NULL, /* port B read */
DEVCB_DRIVER_MEMBER(tandy200_state, i8155_pb_w), /* port B write */
DEVCB_DRIVER_MEMBER(tandy200_state, i8155_pc_r), /* port C read */
DEVCB_NULL, /* port C write */
DEVCB_DRIVER_LINE_MEMBER(tandy200_state, i8155_to_w) /* timer output */
};
/* IM6402 Interface */
static IM6402_INTERFACE( uart_intf )
{
0,
0,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL
};
/* I8251 Interface */
static const i8251_interface tandy200_uart_intf =
{
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL,
DEVCB_NULL
};
/* Machine Drivers */
void kc85_state::machine_start()
{
address_space &program = m_maincpu->space(AS_PROGRAM);
/* initialize RTC */
m_rtc->cs_w(1);
m_rtc->oe_w(1);
/* configure ROM banking */
program.install_read_bank(0x0000, 0x7fff, "bank1");
program.unmap_write(0x0000, 0x7fff);
membank("bank1")->configure_entry(0, m_rom->base());
membank("bank1")->configure_entry(1, m_option->base());
membank("bank1")->set_entry(0);
/* configure RAM banking */
switch (m_ram->size())
{
case 16 * 1024:
program.unmap_readwrite(0x8000, 0xbfff);
program.install_readwrite_bank(0xc000, 0xffff, "bank2");
break;
case 32 * 1024:
program.install_readwrite_bank(0x8000, 0xffff,"bank2");
break;
}
membank("bank2")->configure_entry(0, m_ram->pointer());
membank("bank2")->set_entry(0);
/* register for state saving */
save_item(NAME(m_bank));
save_item(NAME(m_keylatch));
save_item(NAME(m_buzzer));
save_item(NAME(m_bell));
}
void pc8201_state::machine_start()
{
UINT8 *ram = m_ram->pointer();
/* initialize RTC */
m_rtc->cs_w(1);
m_rtc->oe_w(1);
/* configure ROM banking */
membank("bank1")->configure_entry(0, m_rom->base());
membank("bank1")->configure_entry(1, m_option->base());
membank("bank1")->configure_entries(2, 2, ram + 0x8000, 0x8000);
membank("bank1")->set_entry(0);
/* configure RAM banking */
membank("bank2")->configure_entry(0, ram);
membank("bank2")->configure_entries(2, 2, ram + 0x8000, 0x8000);
membank("bank2")->set_entry(0);
bankswitch(0);
/* register for state saving */
save_item(NAME(m_bank));
save_item(NAME(m_keylatch));
save_item(NAME(m_buzzer));
save_item(NAME(m_bell));
save_item(NAME(m_iosel));
}
void trsm100_state::machine_start()
{
address_space &program = m_maincpu->space(AS_PROGRAM);
/* initialize RTC */
m_rtc->cs_w(1);
m_rtc->oe_w(1);
/* configure ROM banking */
program.install_read_bank(0x0000, 0x7fff, "bank1");
program.unmap_write(0x0000, 0x7fff);
membank("bank1")->configure_entry(0, m_rom->base());
membank("bank1")->configure_entry(1, m_option->base());
membank("bank1")->set_entry(0);
/* configure RAM banking */
switch (m_ram->size())
{
case 8 * 1024:
program.unmap_readwrite(0x8000, 0xcfff);
program.install_readwrite_bank(0xe000, 0xffff, "bank2");
break;
case 16 * 1024:
program.unmap_readwrite(0x8000, 0xbfff);
program.install_readwrite_bank(0xc000, 0xffff, "bank2");
break;
case 24 * 1024:
program.unmap_readwrite(0x8000, 0x9fff);
program.install_readwrite_bank(0xa000, 0xffff, "bank2");
break;
case 32 * 1024:
program.install_readwrite_bank(0x8000, 0xffff, "bank2");
break;
}
membank("bank2")->configure_entry(0, m_ram->pointer());
membank("bank2")->set_entry(0);
/* register for state saving */
save_item(NAME(m_bank));
save_item(NAME(m_keylatch));
save_item(NAME(m_buzzer));
save_item(NAME(m_bell));
}
void tandy200_state::machine_start()
{
/* configure ROM banking */
membank("bank1")->configure_entry(0, m_rom->base());
membank("bank1")->configure_entry(1, m_rom->base() + 0x10000);
membank("bank1")->configure_entry(2, m_option->base());
membank("bank1")->set_entry(0);
/* configure RAM banking */
membank("bank2")->configure_entries(0, 3, m_ram->pointer(), 0x6000);
membank("bank2")->set_entry(0);
/* register for state saving */
save_item(NAME(m_bank));
save_item(NAME(m_tp));
save_item(NAME(m_keylatch));
save_item(NAME(m_buzzer));
save_item(NAME(m_bell));
}
static const cassette_interface kc85_cassette_interface =
{
cassette_default_formats,
NULL,
(cassette_state)(CASSETTE_STOPPED | CASSETTE_MOTOR_DISABLED | CASSETTE_SPEAKER_ENABLED),
NULL,
NULL
};
WRITE_LINE_MEMBER(kc85_state::kc85_sod_w)
{
device_t *device = machine().device(CASSETTE_TAG);
dynamic_cast<cassette_image_device *>(device)->output(state ? +1.0 : -1.0);
}
READ_LINE_MEMBER(kc85_state::kc85_sid_r)
{
device_t *device = machine().device(CASSETTE_TAG);
return dynamic_cast<cassette_image_device *>(device)->input() > 0.0;
}
static I8085_CONFIG( kc85_i8085_config )
{
DEVCB_NULL, /* STATUS changed callback */
DEVCB_NULL, /* INTE changed callback */
DEVCB_DRIVER_LINE_MEMBER(kc85_state,kc85_sid_r), /* SID changed callback (I8085A only) */
DEVCB_DRIVER_LINE_MEMBER(kc85_state,kc85_sod_w) /* SOD changed callback (I8085A only) */
};
TIMER_DEVICE_CALLBACK_MEMBER(tandy200_state::tandy200_tp_tick)
{
m_maincpu->set_input_line(I8085_RST75_LINE, m_tp);
m_tp = !m_tp;
}
static MACHINE_CONFIG_START( kc85, kc85_state )
/* basic machine hardware */
MCFG_CPU_ADD(I8085_TAG, I8085A, XTAL_4_9152MHz)
MCFG_CPU_PROGRAM_MAP(kc85_mem)
MCFG_CPU_IO_MAP(kc85_io)
MCFG_CPU_CONFIG(kc85_i8085_config)
/* video hardware */
MCFG_FRAGMENT_ADD(kc85_video)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_SOUND_ADD(SPEAKER_TAG, SPEAKER_SOUND, 0)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.25)
/* devices */
MCFG_I8155_ADD(I8155_TAG, XTAL_4_9152MHz/2, kc85_8155_intf)
MCFG_UPD1990A_ADD(UPD1990A_TAG, XTAL_32_768kHz, kc85_upd1990a_intf)
MCFG_IM6402_ADD(IM6402_TAG, uart_intf)
MCFG_CENTRONICS_PRINTER_ADD(CENTRONICS_TAG, standard_centronics)
MCFG_CASSETTE_ADD(CASSETTE_TAG, kc85_cassette_interface)
/* option ROM cartridge */
MCFG_CARTSLOT_ADD("cart")
MCFG_CARTSLOT_EXTENSION_LIST("rom,bin")
MCFG_CARTSLOT_NOT_MANDATORY
MCFG_CARTSLOT_INTERFACE("trsm100_cart")
/* software lists */
MCFG_SOFTWARE_LIST_ADD("cart_list", "trsm100")
/* internal ram */
MCFG_RAM_ADD(RAM_TAG)
MCFG_RAM_DEFAULT_SIZE("16K")
MCFG_RAM_EXTRA_OPTIONS("32K")
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( pc8201, pc8201_state )
/* basic machine hardware */
MCFG_CPU_ADD(I8085_TAG, I8085A, XTAL_4_9152MHz)
MCFG_CPU_PROGRAM_MAP(pc8201_mem)
MCFG_CPU_IO_MAP(pc8201_io)
MCFG_CPU_CONFIG(kc85_i8085_config)
/* video hardware */
MCFG_FRAGMENT_ADD(kc85_video)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_SOUND_ADD(SPEAKER_TAG, SPEAKER_SOUND, 0)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.25)
/* devices */
MCFG_I8155_ADD(I8155_TAG, XTAL_4_9152MHz/2, kc85_8155_intf)
MCFG_UPD1990A_ADD(UPD1990A_TAG, XTAL_32_768kHz, kc85_upd1990a_intf)
MCFG_IM6402_ADD(IM6402_TAG, uart_intf)
MCFG_CENTRONICS_PRINTER_ADD(CENTRONICS_TAG, standard_centronics)
MCFG_CASSETTE_ADD(CASSETTE_TAG, kc85_cassette_interface)
/* option ROM cartridge */
MCFG_CARTSLOT_ADD("cart")
MCFG_CARTSLOT_EXTENSION_LIST("rom,bin")
MCFG_CARTSLOT_NOT_MANDATORY
MCFG_CARTSLOT_INTERFACE("pc8201_cart")
/* 128KB ROM cassette */
MCFG_CARTSLOT_ADD("cart2")
MCFG_CARTSLOT_EXTENSION_LIST("rom,bin")
MCFG_CARTSLOT_NOT_MANDATORY
MCFG_CARTSLOT_INTERFACE("pc8201_cart2")
/* software lists */
MCFG_SOFTWARE_LIST_ADD("cart_list", "pc8201")
/* internal ram */
MCFG_RAM_ADD(RAM_TAG)
MCFG_RAM_DEFAULT_SIZE("16K")
MCFG_RAM_EXTRA_OPTIONS("32K,64K,96K")
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( trsm100, trsm100_state )
/* basic machine hardware */
MCFG_CPU_ADD(I8085_TAG, I8085A, XTAL_4_9152MHz)
MCFG_CPU_PROGRAM_MAP(kc85_mem)
MCFG_CPU_IO_MAP(trsm100_io)
MCFG_CPU_CONFIG(kc85_i8085_config)
/* video hardware */
MCFG_FRAGMENT_ADD(kc85_video)
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_SOUND_ADD(SPEAKER_TAG, SPEAKER_SOUND, 0)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.25)
/* devices */
MCFG_I8155_ADD(I8155_TAG, XTAL_4_9152MHz/2, kc85_8155_intf)
MCFG_UPD1990A_ADD(UPD1990A_TAG, XTAL_32_768kHz, kc85_upd1990a_intf)
MCFG_IM6402_ADD(IM6402_TAG, uart_intf)
MCFG_CENTRONICS_PRINTER_ADD(CENTRONICS_TAG, standard_centronics)
MCFG_CASSETTE_ADD(CASSETTE_TAG, kc85_cassette_interface)
// MCFG_MC14412_ADD(MC14412_TAG, XTAL_1MHz)
/* option ROM cartridge */
MCFG_CARTSLOT_ADD("cart")
MCFG_CARTSLOT_EXTENSION_LIST("rom,bin")
MCFG_CARTSLOT_NOT_MANDATORY
MCFG_CARTSLOT_INTERFACE("trsm100_cart")
/* software lists */
MCFG_SOFTWARE_LIST_ADD("cart_list", "trsm100")
/* internal ram */
MCFG_RAM_ADD(RAM_TAG)
MCFG_RAM_DEFAULT_SIZE("8K")
MCFG_RAM_EXTRA_OPTIONS("16K,24K,32K")
MACHINE_CONFIG_END
static MACHINE_CONFIG_DERIVED( tandy102, trsm100 )
MCFG_RAM_MODIFY(RAM_TAG)
MCFG_RAM_DEFAULT_SIZE("24K")
MCFG_RAM_EXTRA_OPTIONS("32K")
MACHINE_CONFIG_END
static MACHINE_CONFIG_START( tandy200, tandy200_state )
/* basic machine hardware */
MCFG_CPU_ADD(I8085_TAG, I8085A, XTAL_4_9152MHz)
MCFG_CPU_PROGRAM_MAP(tandy200_mem)
MCFG_CPU_IO_MAP(tandy200_io)
MCFG_CPU_CONFIG(kc85_i8085_config)
/* video hardware */
MCFG_FRAGMENT_ADD(tandy200_video)
/* TP timer */
MCFG_TIMER_DRIVER_ADD_PERIODIC("tp", tandy200_state, tandy200_tp_tick, attotime::from_hz(XTAL_4_9152MHz/2/8192))
/* sound hardware */
MCFG_SPEAKER_STANDARD_MONO("mono")
MCFG_SOUND_ADD(SPEAKER_TAG, SPEAKER_SOUND, 0)
MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.25)
// MCFG_TCM5089_ADD(TCM5089_TAG, XTAL_3_579545MHz)
/* devices */
MCFG_I8155_ADD(I8155_TAG, XTAL_4_9152MHz/2, tandy200_8155_intf)
MCFG_RP5C01_ADD(RP5C01A_TAG, XTAL_32_768kHz, tandy200_rtc_intf)
MCFG_I8251_ADD(I8251_TAG, /*XTAL_4_9152MHz/2,*/ tandy200_uart_intf)
// MCFG_MC14412_ADD(MC14412_TAG, XTAL_1MHz)
MCFG_CENTRONICS_PRINTER_ADD(CENTRONICS_TAG, standard_centronics)
MCFG_CASSETTE_ADD(CASSETTE_TAG, kc85_cassette_interface)
/* option ROM cartridge */
MCFG_CARTSLOT_ADD("cart")
MCFG_CARTSLOT_EXTENSION_LIST("rom,bin")
MCFG_CARTSLOT_NOT_MANDATORY
MCFG_CARTSLOT_INTERFACE("tandy200_cart")
/* software lists */
MCFG_SOFTWARE_LIST_ADD("cart_list", "tandy200")
/* internal ram */
MCFG_RAM_ADD(RAM_TAG)
MCFG_RAM_DEFAULT_SIZE("24K")
MCFG_RAM_EXTRA_OPTIONS("48K,72K")
MACHINE_CONFIG_END
/* ROMs */
ROM_START( kc85 )
ROM_REGION( 0x8000, I8085_TAG, 0 )
ROM_LOAD( "kc85rom.bin", 0x0000, 0x8000, CRC(8a9ddd6b) SHA1(9d18cb525580c9e071e23bc3c472380aa46356c0) )
ROM_REGION( 0x8000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart", 0x0000, 0x8000, ROM_MIRROR | ROM_OPTIONAL)
ROM_END
// This BIOS is 99% bad: it contains no Japanese keyboard layout and if you enter the following BASIC program
// 10 FOR A=0 TO 255
// 20 PRINT CHR$(A);
// 30 NEXT A
// there are no Japanese characters printed out (contrary to what can be seen at Takeda's emu page)
ROM_START( pc8201 )
ROM_REGION( 0x10000, I8085_TAG, 0 )
ROM_LOAD( "ipl.rom", 0x0000, 0x8000, BAD_DUMP CRC(3725d32a) SHA1(5b63b520e667b202b27c630cda821beae819e914) )
ROM_REGION( 0x8000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart1", 0x0000, 0x8000, ROM_MIRROR | ROM_OPTIONAL)
ROM_REGION( 0x20000, CASSETTE_TAG, ROMREGION_ERASEFF )
ROM_CART_LOAD("cart2", 0x0000, 0x20000, ROM_MIRROR | ROM_OPTIONAL)
ROM_END
ROM_START( pc8201a )
ROM_REGION( 0x10000, I8085_TAG, 0 )
ROM_LOAD( "pc8201rom.rom", 0x0000, 0x8000, CRC(30555035) SHA1(96f33ff235db3028bf5296052acedbc94437c596) )
ROM_REGION( 0x8000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart", 0x0000, 0x8000, ROM_MIRROR | ROM_OPTIONAL)
ROM_REGION( 0x20000, CASSETTE_TAG, ROMREGION_ERASEFF )
ROM_CART_LOAD("cart2", 0x0000, 0x20000, ROM_MIRROR | ROM_OPTIONAL)
ROM_END
ROM_START( npc8300 )
ROM_REGION( 0x10000, I8085_TAG, 0 )
ROM_LOAD( "831000-438_n83a_basic_1986_microsoft_8716_z01.bin", 0x0000, 0x8000, CRC(a3c15dcb) SHA1(f0322dfe3f2e951de043bf6d0973e6ffc2c87181))
ROM_REGION( 0x8000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart1", 0x0000, 0x8000, ROM_MIRROR | ROM_OPTIONAL)
ROM_REGION( 0x20000, CASSETTE_TAG, ROMREGION_ERASEFF )
ROM_CART_LOAD("cart2", 0x0000, 0x20000, ROM_MIRROR | ROM_OPTIONAL)
ROM_END
ROM_START( trsm100 )
/*
Board Code ROM type ROM Code Comment
-------------------------------------------------------------------
PLX110CH1X custom LH535618 early North America
PLX110EH1X 27C256 compatible 3256C07-3J1/11US late North America
PLX120CH1X 27C256 compatible 3256C05-3E1/11EP European/Italian
*/
ROM_REGION( 0x8000, I8085_TAG, 0 )
ROM_LOAD( "m100rom.m12", 0x0000, 0x8000, CRC(730a3611) SHA1(094dbc4ac5a4ea5cdf51a1ac581a40a9622bb25d) )
// increased to 0x30000 to fully load 'Booster Pack', but its banking is still unknown
ROM_REGION( 0x30000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart", 0x0000, 0x30000, ROM_MIRROR | ROM_OPTIONAL)
ROM_END
ROM_START( m10 )
// 3256C02-4B3/I Italian
ROM_REGION( 0x8010, I8085_TAG, 0 )
ROM_LOAD( "m10rom.m12", 0x0000, 0x8000, CRC(f0e8447a) SHA1(d58867276213116a79f7074109b7d7ce02e8a3af) )
ROM_REGION( 0x8000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart", 0x0000, 0x8000, ROM_MIRROR | ROM_OPTIONAL)
ROM_END
ROM_START( tandy102 )
ROM_REGION( 0x8000, I8085_TAG, 0 )
ROM_LOAD( "m102rom.m12", 0x0000, 0x8000, CRC(08e9f89c) SHA1(b6ede7735a361c80419f4c9c0e36e7d480c36d11) )
ROM_REGION( 0x8000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart", 0x0000, 0x8000, ROM_MIRROR | ROM_OPTIONAL)
ROM_END
ROM_START( tandy200 )
ROM_REGION( 0x18000, I8085_TAG, 0 )
ROM_LOAD( "rom #1-1.m15", 0x00000, 0x8000, NO_DUMP )
ROM_LOAD( "rom #1-2.m13", 0x08000, 0x2000, NO_DUMP )
ROM_LOAD( "rom #2.m14", 0x10000, 0x8000, NO_DUMP )
ROM_LOAD( "t200rom.bin", 0x0000, 0xa000, BAD_DUMP CRC(e3358b38) SHA1(35d4e6a5fb8fc584419f57ec12b423f6021c0991) ) /* Y2K hacked */
ROM_CONTINUE( 0x10000, 0x8000 )
ROM_REGION( 0x8000, "option", ROMREGION_ERASEFF )
ROM_CART_LOAD("cart", 0x0000, 0x8000, ROM_NOMIRROR | ROM_OPTIONAL)
ROM_END
/* System Drivers */
/* YEAR NAME PARENT COMPAT MACHINE INPUT INIT COMPANY FULLNAME */
COMP( 1983, kc85, 0, 0, kc85, kc85, driver_device, 0, "Kyosei", "Kyotronic 85 (Japan)", 0 )
COMP( 1983, m10, kc85, 0, kc85, olivm10, driver_device, 0, "Olivetti", "M-10", 0 )
//COMP( 1983, m10m, kc85, 0, kc85, olivm10, driver_device, 0, "Olivetti", "M-10 Modem (US)", 0 )
COMP( 1983, trsm100, 0, 0, trsm100, kc85, driver_device, 0, "Tandy Radio Shack", "TRS-80 Model 100", 0 )
COMP( 1986, tandy102, trsm100,0, tandy102, kc85, driver_device, 0, "Tandy Radio Shack", "Tandy 102", 0 )
COMP( 1983, pc8201, 0, 0, pc8201, pc8201a, driver_device, 0, "Nippon Electronic Company", "PC-8201 (Japan)", 0 )
COMP( 1983, pc8201a, pc8201, 0, pc8201, pc8201a, driver_device, 0, "Nippon Electronic Company", "PC-8201A", 0 )
COMP( 1987, npc8300, pc8201, 0, pc8201, pc8201a, driver_device, 0, "Nippon Electronic Company", "PC-8300", GAME_NOT_WORKING )
COMP( 1984, tandy200, 0, 0, tandy200, kc85, driver_device, 0, "Tandy Radio Shack", "Tandy 200", 0 )
Reference in New Issue View Git Blame Copy Permalink