Sprinter/mame
2
0
Fork 0
mirror of https://github.com/holub/mame synced 2025-05-22 21:58:57 +03:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
cc1eff9abd
mame/src/mess/drivers/vcs80.c
Curt Coder fc33a3716e (MESS) Tagmap lookup cleanup. (nw)
2013-01-28 15:00:44 +00:00

264 lines
7.8 KiB
C
Raw Blame History

/***************************************************************************
VCS-80
12/05/2009 Skeleton driver.
http://hc-ddr.hucki.net/entwicklungssysteme.htm#VCS_80_von_Eckhard_Schiller
This system is heavily based on the tk80. The display and keyboard matrix
are very similar, while the operation is easier in the vcs80. The hardware
is completely different however.
Pasting:
0-F : as is
A+ : ^
A- : V
MA : -
GO : X
When booted, the system begins at 0000 which is ROM. You need to change the
address to 0400 before entering a program. Here is a test to paste in:
0400-11^22^33^44^55^66^77^88^99^0400-
Press the up-arrow to confirm data has been entered.
Operation:
4 digits at left is the address; 2 digits at right is the data.
As you increment addresses, the middle 2 digits show the previous byte.
You can enter 4 digits, and pressing 'MA' will transfer this info
to the left, thus setting the address to this value. Press 'A+' to
store new data and increment the address.
****************************************************************************/
#include "includes/vcs80.h"
#include "vcs80.lh"
/* Read/Write Handlers */
READ8_MEMBER( vcs80_state::pio_r )
{
switch (offset)
{
case 0: return m_pio->control_read();
case 1: return m_pio->control_read();
case 2: return m_pio->data_read(1);
case 3: return m_pio->data_read(0);
}
return 0;
}
WRITE8_MEMBER( vcs80_state::pio_w )
{
switch (offset)
{
case 0: m_pio->control_write(1, data); break;
case 1: m_pio->control_write(0, data); break;
case 2: m_pio->data_write(1, data); break;
case 3: m_pio->data_write(0, data); break;
}
}
/* Memory Maps */
static ADDRESS_MAP_START( vcs80_mem, AS_PROGRAM, 8, vcs80_state )
AM_RANGE(0x0000, 0x01ff) AM_ROM
AM_RANGE(0x0400, 0x07ff) AM_RAM
ADDRESS_MAP_END
static ADDRESS_MAP_START( vcs80_io, AS_IO, 8, vcs80_state )
ADDRESS_MAP_GLOBAL_MASK(0xff)
AM_RANGE(0x04, 0x07) AM_READWRITE(pio_r, pio_w)
ADDRESS_MAP_END
/* Input Ports */
static INPUT_PORTS_START( vcs80 )
PORT_START("Y0")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_0) PORT_CHAR('0')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_1) PORT_CHAR('1')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_2) PORT_CHAR('2')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_3) PORT_CHAR('3')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_4) PORT_CHAR('4')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_5) PORT_CHAR('5')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_6) PORT_CHAR('6')
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_7) PORT_CHAR('7')
PORT_START("Y1")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_8) PORT_CHAR('8')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_9) PORT_CHAR('9')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_A) PORT_CHAR('A')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_B) PORT_CHAR('B')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_C) PORT_CHAR('C')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_D) PORT_CHAR('D')
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_E) PORT_CHAR('E')
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_F) PORT_CHAR('F')
PORT_START("Y2")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("A+") PORT_CODE(KEYCODE_UP) PORT_CHAR('^')
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("A-") PORT_CODE(KEYCODE_DOWN) PORT_CHAR('V')
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("MA") PORT_CODE(KEYCODE_M) PORT_CHAR('-')
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("RE") PORT_CODE(KEYCODE_R) PORT_CHAR('R')
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("GO") PORT_CODE(KEYCODE_G) PORT_CODE(KEYCODE_X) PORT_CHAR('X')
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("TR") PORT_CODE(KEYCODE_T)
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("ST") PORT_CODE(KEYCODE_S)
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("PE") PORT_CODE(KEYCODE_P)
INPUT_PORTS_END
/* Z80-PIO Interface */
TIMER_DEVICE_CALLBACK_MEMBER(vcs80_state::vcs80_keyboard_tick)
{
if (m_keyclk)
{
m_keylatch++;
m_keylatch &= 7;
}
m_pio->port_a_write(m_keyclk << 7);
m_keyclk = !m_keyclk;
}
READ8_MEMBER( vcs80_state::pio_pa_r )
{
/*
bit description
PA0 keyboard and led latch bit 0
PA1 keyboard and led latch bit 1
PA2 keyboard and led latch bit 2
PA3 GND
PA4 keyboard row input 0
PA5 keyboard row input 1
PA6 keyboard row input 2
PA7 demultiplexer clock input
*/
UINT8 data = 0;
/* keyboard and led latch */
data |= m_keylatch;
/* keyboard rows */
data |= BIT(m_y0->read(), m_keylatch) << 4;
data |= BIT(m_y1->read(), m_keylatch) << 5;
data |= BIT(m_y2->read(), m_keylatch) << 6;
/* demultiplexer clock */
data |= (m_keyclk << 7);
return data;
}
WRITE8_MEMBER( vcs80_state::pio_pb_w )
{
/*
bit description
PB0 VQD30 segment A
PB1 VQD30 segment B
PB2 VQD30 segment C
PB3 VQD30 segment D
PB4 VQD30 segment E
PB5 VQD30 segment G
PB6 VQD30 segment F
PB7 _A0
*/
UINT8 led_data = BITSWAP8(data & 0x7f, 7, 5, 6, 4, 3, 2, 1, 0);
int digit = m_keylatch;
/* skip middle digit */
if (digit > 3) digit++;
output_set_digit_value(8 - digit, led_data);
}
static Z80PIO_INTERFACE( pio_intf )
{
DEVCB_CPU_INPUT_LINE(Z80_TAG, INPUT_LINE_IRQ0), /* callback when change interrupt status */
DEVCB_DRIVER_MEMBER(vcs80_state, pio_pa_r), /* port A read callback */
DEVCB_NULL, /* port A write callback */
DEVCB_NULL, /* portA ready active callback */
DEVCB_NULL, /* port B read callback */
DEVCB_DRIVER_MEMBER(vcs80_state, pio_pb_w), /* port B write callback */
DEVCB_NULL /* portB ready active callback */
};
/* Z80 Daisy Chain */
static const z80_daisy_config vcs80_daisy_chain[] =
{
{ Z80PIO_TAG },
{ NULL }
};
/* Machine Initialization */
void vcs80_state::machine_start()
{
m_pio->strobe_a(1);
m_pio->strobe_b(1);
/* register for state saving */
save_item(NAME(m_keylatch));
save_item(NAME(m_keyclk));
}
/* Machine Driver */
static MACHINE_CONFIG_START( vcs80, vcs80_state )
/* basic machine hardware */
MCFG_CPU_ADD(Z80_TAG, Z80, XTAL_5MHz/2) /* U880D */
MCFG_CPU_PROGRAM_MAP(vcs80_mem)
MCFG_CPU_IO_MAP(vcs80_io)
MCFG_CPU_CONFIG(vcs80_daisy_chain)
/* keyboard timer */
MCFG_TIMER_DRIVER_ADD_PERIODIC("keyboard", vcs80_state, vcs80_keyboard_tick, attotime::from_hz(1000))
/* video hardware */
MCFG_DEFAULT_LAYOUT( layout_vcs80 )
/* devices */
MCFG_Z80PIO_ADD(Z80PIO_TAG, XTAL_5MHz/2, pio_intf)
/* internal ram */
MCFG_RAM_ADD(RAM_TAG)
MCFG_RAM_DEFAULT_SIZE("1K")
MACHINE_CONFIG_END
/* ROMs */
ROM_START( vcs80 )
ROM_REGION( 0x10000, Z80_TAG, 0 )
ROM_LOAD( "monitor.rom", 0x0000, 0x0200, CRC(44aff4e9) SHA1(3472e5a9357eaba3ed6de65dee2b1c6b29349dd2) )
ROM_END
/* Driver Initialization */
DIRECT_UPDATE_MEMBER(vcs80_state::vcs80_direct_update_handler)
{
/* _A0 is connected to PIO PB7 */
m_pio->port_b_write((!BIT(address, 0)) << 7);
return address;
}
DRIVER_INIT_MEMBER(vcs80_state,vcs80)
{
machine().device(Z80_TAG)->memory().space(AS_PROGRAM).set_direct_update_handler(direct_update_delegate(FUNC(vcs80_state::vcs80_direct_update_handler), this));
machine().device(Z80_TAG)->memory().space(AS_IO).set_direct_update_handler(direct_update_delegate(FUNC(vcs80_state::vcs80_direct_update_handler), this));
}
/* System Drivers */
/* YEAR NAME PARENT COMPAT MACHINE INPUT INIT COMPANY FULLNAME FLAGS */
COMP( 1983, vcs80, 0, 0, vcs80, vcs80, vcs80_state, vcs80, "Eckhard Schiller", "VCS-80", GAME_SUPPORTS_SAVE | GAME_NO_SOUND)
Reference in New Issue View Git Blame Copy Permalink