a9f017e86c
Videa/Sente stuff from the brief period before it was acquired by Bally is still in the bally project.
551 lines
24 KiB
C++
551 lines
24 KiB
C++
// license:BSD-3-Clause
|
|
// copyright-holders:Angelo Salese
|
|
/**************************************************************************************************
|
|
|
|
Midway Quicksilver II/Graphite skeleton driver
|
|
|
|
TODO (BIOS):
|
|
- Accesses missing keyboard and RTC areas, needs to fix up Super I/O type;
|
|
- Currently used SMBus device EEPROM is incompatible with the BIOS used here, it expects a 4 to byte [0x02] (= SDRAM), there's no real code path for currently used DDR SDRAM setting.
|
|
Eventually will throw a "SPD device data missing or inconclusive."
|
|
- Several hang points before VGA drawing text, pinpoint them all;
|
|
- Detects a Pentium II at 700 MHz (?)
|
|
|
|
TODO:
|
|
- Fix HDD BAD_DUMPs ("primary master hard disk fail" in shutms11):
|
|
\- hydro -chs 392,255,63
|
|
\- offrthnd -chs 784,255,63
|
|
NB: arctthnd just returns a more canonical -chs 16383,16,63,
|
|
the other two hydrthnd dumps -chs 6256,16,63
|
|
- In pcipc hydrthnd101b/hydrthnd100d draws some basic debug strings thru
|
|
VGA then throws 6 short beeps "peripheral problem", does extensive checks
|
|
with COM1 $3f8-$3ff, implying that is failing for Diego I/O.
|
|
- In pcipc/shutms11 arctthnd keeps repeating arpl calls, is the dump ok?
|
|
- In pcipc/shutms11 ultarctc Windows 2000 bootstrap BSoDs with a
|
|
INACCESSIBLE_BOOT_DEVICE;
|
|
- ultarctcup cdrom has several tools inside for debugging the custom HW;
|
|
- It's unclear about how the ultarctcup update really works by reading the
|
|
notes below: it picks up an Arctic Thunder disk and updates it?
|
|
On incompatible HW? Investigate once we get there.
|
|
|
|
===================================================================================================
|
|
|
|
Hardware configurations:
|
|
|
|
Hydro Thunder: Quicksilver II system and Diego I/O board
|
|
Offroad Thunder: Quicksilver II system and Magicbus I/O board
|
|
Arctic Thunder: Graphite system and Substitute I/O board
|
|
|
|
All of the games communicate with their I/O boards serially.
|
|
|
|
Quicksilver II hardware:
|
|
- Main CPU: Intel Celeron (Pentium II) 333/366MHz
|
|
- Motherboard: Intel SE440BX-2 "4S4EB2X0.86A.0017.P10"
|
|
- RAM: 64MB PC100-222-620 non-ecc
|
|
- Sound: Integrated YMF740C (DS-1L) (XG PCI version)
|
|
- Networking: SMC EZ Card 10 / SMC1208T (probably 10ec:8029 1113:1208)
|
|
- Video Card: Quantum Obsidian 3DFX Voodoo 2 (CPLD protected)
|
|
- Storage: Hard Drive
|
|
- OS: TNT Embedded Kernel
|
|
|
|
Chipsets (440BX AGPset):
|
|
- 82443BX Northbridge
|
|
- 82371EB PIIX4 PCI-ISA Southbridge
|
|
|
|
Note: This was once claimed to run on Windows 95 or 98 but has been proven (mostly) false. The TNT Kernel was a "DOS Extender"
|
|
that allows core Windows NT functions to work on MS DOS. It's also possible it runs on a custom made OS as both games do not display
|
|
anything DOS related.
|
|
|
|
Graphite hardware:
|
|
- Main CPU: Intel Pentium III 733MHz
|
|
- Motherboard: BCM GT694VP
|
|
- RAM: 128MB PC100/133
|
|
- Sound: Integrated AC'97 Controller on VT82C686A Southbridge
|
|
+ ES1373/CT5880 Audio Chip
|
|
or CMI8738/8768 driver with PCIR 13f6:0111, as per XP-2K-ME folder (?)
|
|
- Networking: SMC EZ Card 10 / SMC1208T (probably 10ec:8029 1113:1208)
|
|
- Video Card: 3DFX Voodoo 3
|
|
- Storage: Hard Drive (copy protected)
|
|
- OS: Windows 2000 Professional
|
|
|
|
Chipsets (VIA Pro133A):
|
|
- VT82C694X Northbridge
|
|
- VT82C686A Southbridge
|
|
|
|
Note: Entirely different motherboard/chipset hardware (most likely needs its own driver). This game's storage device has a
|
|
copy protection scheme that "locks" the storage device to the motherboard's serial number. If a drive doesn't match the
|
|
motherboard's serial number, the game launcher will give an error.
|
|
|
|
I/O boards:
|
|
|
|
MIDWAY GAMES INC
|
|
5770-15983-04
|
|
DIEGO
|
|
|
|
|--------------------------------------------------------------|
|
|
| JP13 JP14 JP15 J1 JP2 |
|
|
| |
|
|
| JP1 JP5 JP6 |
|
|
| JP4 |
|
|
| JP3 |
|
|
| U1 |
|
|
| JP11 U2 U3 |
|
|
| |
|
|
| U12 JP12 |
|
|
|JP9 |
|
|
| U5 U6 U10 JP8|
|
|
| U8 S1 |
|
|
| Y2 |
|
|
| U7 Q2 U4 |
|
|
| |
|
|
| JP15 J2 J3 |
|
|
| P1 JP10 JP7 |
|
|
|--------------------------------------------------------------|
|
|
|
|
Notes:
|
|
J1: Video connector from/to video card
|
|
J2/J3: USB ports (not used)
|
|
JP1: Alternate video connector from/to video card
|
|
JP2: Video output signal to monitor
|
|
JP3: 3 pin jumper: Blue video level, *Open: high, 1-2: low, 2-3: high
|
|
JP4: 3 pin jumper: Green video level, *Open: high, 1-2: low, 2-3: high
|
|
JP5: 3 pin jumper: Red video level, *Open: high, 1-2: low, 2-3: high
|
|
JP6: 3 pin jumper: Video sync polarity, *Open: pos, 1-2: neg, 2-3: pos
|
|
JP7: 13 pin connector for switches and analog controls/potentiometers
|
|
JP8: 14 pin connector for coin, service, volume and test inputs
|
|
JP9: 20 pin ribbon cable connector to wheel driver board
|
|
JP10: 9 pin connector for coin meter
|
|
JP11: 2 pin connector for watchdog reset
|
|
JP12: connector for development use, not used
|
|
JP13-14: connectors, not used
|
|
JP15: Alternate serial port
|
|
JP16: Power connector
|
|
P1: DB9 serial port to computer
|
|
Q2: ULN2064B Darlington Transistor
|
|
S1: Dip Switches (8).
|
|
S1-3: *Off: Game Mode, On: Test Mode
|
|
S1-4: *Off: 25" Cabinet, On: 39" Cabinet
|
|
S1-8: Off: Watchdog Disabled, *On: Watchdog Enabled
|
|
U1: Texas Instruments LS85A Logic Gate
|
|
U2-3: EL244CS Amplifier
|
|
U4: LTC1098 8-bit Serial A/D converter
|
|
U5: PC16550DV UART Interface IC
|
|
U6: Motorola MC74HC273A Octal D Flip-Flop (LS273 based)
|
|
U7: DS14185WM RS-232 Interface IC
|
|
U8: CY7C63513-PVC 8-bit RISC Microcontroller @12MHz (6MHz OSC)
|
|
U10: Atmel 24C01A Serial EEPROM
|
|
U12: MAX707CSA Supervisory Circuit
|
|
Y2: Crystal/XTAL 6.000 MHz
|
|
|
|
|
|
MIDWAY GAMES INC
|
|
5770-16226-01
|
|
MAGICBUS
|
|
|
|
|--------------------------------------------------------------------------------------------|
|
|
| J2 JP21 JP22 JP12 JP9 J1 |
|
|
| JP24 JP6 |
|
|
| P1 JP5 JP3 JP2 JP1 |
|
|
| JP23 U19 |
|
|
| U22 JP4 |
|
|
|JP10 Q4 U2 U3 U1 |
|
|
| U17 |
|
|
| Y1 U18 |
|
|
| U5 |
|
|
| U20 |
|
|
|JP11 U21 |
|
|
| |
|
|
| U6 S2 S1 |
|
|
| JP20 |
|
|
| |
|
|
|JP16 U12 U16 U15 |
|
|
| |
|
|
| U11 |
|
|
| JP17 JP19 JP18 JP13 JP14 JP15 |
|
|
|--------------------------------------------------------------------------------------------|
|
|
|
|
Notes:
|
|
J1: Video connector from/to video card
|
|
J2: USB port (not used)
|
|
JP1: 3 pin jumper: Blue video level, *Open: high, 1-2: low, 2-3: high
|
|
JP2: 3 pin jumper: Green video level, *Open: high, 1-2: low, 2-3: high
|
|
JP3: 3 pin jumper: Red video level, *Open: high, 1-2: low, 2-3: high
|
|
JP4: 3 pin jumper: Video sync polarity, Open: pos, *1-2: neg, 2-3: pos
|
|
JP5: Alternate video connector from/to video card
|
|
JP6: Video output signal to monitor
|
|
JP9: Power connector
|
|
JP10: 20 pin ribbon cable connector to wheel driver board
|
|
JP11: 20 pin ribbon cable connector, not used
|
|
JP12-14: connectors, not used
|
|
JP15: 14 pin connector for analog controls/potentiometers
|
|
JP16: 15 pin connector for gameplay inputs
|
|
JP17: connector, not used
|
|
JP18: 14 pin connector for coin, service, volume and test inputs
|
|
JP19: connector, not used
|
|
JP20: connector for development use, not used
|
|
JP21: 2 pin connector for watchdog reset
|
|
JP22: 9 pin connector for coin meter
|
|
JP23: Alternate serial port
|
|
JP24: connector, not used
|
|
P1: DB9 serial port to computer
|
|
Q4: ULN2064B Darlington Transistor
|
|
S1: Dip Switches (8)
|
|
S1-7: *Off: UART, On: USB
|
|
S1-8: *Off: Watchdog Enabled, On: Watchdog Disabled
|
|
S2: Dip Switches (8), all set to "off"
|
|
U1: LS85A Logic Gate
|
|
U2-3: EL244CS Amplifier
|
|
U5: MAX707CSA Supervisory Circuit
|
|
U6: Motorola MC74HC273A Octal D Flip-Flop (LS273 based)
|
|
U11: ADC0834 Serial I/O Converter
|
|
U12-15: HC541 Octal Buffer
|
|
U17: Atmel 24C01A Serial EEPROM
|
|
U18: CY7C63513-PVC 8-bit RISC Microcontroller @12MHz (6MHz OSC)
|
|
U19: DS14185WM RS-232 Interface IC
|
|
U20: PC16550DV UART Interface IC
|
|
U21: Oscillator 3.6864 MHz
|
|
U22: HC04 Hex Inverter
|
|
Y1: Crystal/XTAL 6.000 MHz
|
|
|
|
MIDWAY GAMES INC.
|
|
SUBSTITUTE MAGICBUS
|
|
5770-16367-02
|
|
|
|
|--------------------------------------------------------------------------------------------|
|
|
| J2 P1 JP21 JP22 JP12 JP9 J1 |
|
|
| JP23 JP24 JP6 |
|
|
| U21 U24 U22 JP5 JP3 JP2 JP1 |
|
|
| |
|
|
| U23 JP4 |
|
|
|JP10 |
|
|
| U11 U7 U8 |
|
|
| |
|
|
| |
|
|
| U6 |
|
|
|JP11 Y2 U20 |
|
|
| |
|
|
| U25 U4 |
|
|
| S2 S1 |
|
|
|JP16 U15 U16 U17 U19 U18 U5 U13 U12 U14 |
|
|
| |
|
|
| |
|
|
| |
|
|
| JP17 JP19 JP18 JP13 JP14 JP15 |
|
|
|--------------------------------------------------------------------------------------------|
|
|
|
|
Notes:
|
|
J1/JP5: Video connector from/to video card, not used
|
|
J2: USB port, not used
|
|
JP1-4: Video signal jumpers, not used
|
|
JP6: Video output signal to monitor, not used
|
|
JP9: Power connector
|
|
JP10: 20 pin ribbon cable connector to wheel driver board
|
|
JP11: 20 pin ribbon cable connector, not used
|
|
JP12-14: connectors, not used
|
|
JP15: 14 pin connector for analog controls/potentiometers
|
|
JP16: 15 pin connector, attack button
|
|
JP17: connector, not used
|
|
JP18: 14 pin connector for coin, service, volume and test inputs
|
|
JP19: 8 pin connector, start button
|
|
JP20: connector for development use, not used
|
|
JP21: 2 pin connector for watchdog reset
|
|
JP22: 9 pin connector for coin meter
|
|
JP23: Alternate serial port
|
|
JP24: connector, not used
|
|
P1: DB9 serial port to computer
|
|
S1: Dip Switches (8)
|
|
S1: Dip Switches (8)
|
|
S1-7: *Off: UART, On: USB
|
|
S1-8: *Off: Watchdog Enabled, On: Watchdog Disabled
|
|
S2: Dip Switches (8)
|
|
U4-5: MC74HC273A Octal D Flip-Flop (LS273 based)
|
|
U6: 74HC04D Hex inverter
|
|
U7: MAX707CSA Supervisory Circuit
|
|
U8: MAX765CSA Switching Voltage Regulator
|
|
U11: Atmel 24C01A Serial EEPROM
|
|
U12-19: HC541 Octal Buffer
|
|
U20: 87C552 8-bit Microcontroller (Intel MCS-51 based with a 10-bit A/D converter) @ 16MHz
|
|
U21: DS14185WM RS-232 Interface IC
|
|
U22-24: ULN2064B Darlington Transistor
|
|
U25: 74HC367D Hex Buffer/Line Driver
|
|
Y2: Crystal/XTAL 16.000 MHz
|
|
|
|
**************************************************************************************************/
|
|
|
|
|
|
#include "emu.h"
|
|
|
|
#include "bus/isa/isa_cards.h"
|
|
#include "bus/pci/virge_pci.h"
|
|
//#include "bus/rs232/hlemouse.h"
|
|
//#include "bus/rs232/null_modem.h"
|
|
//#include "bus/rs232/rs232.h"
|
|
//#include "bus/rs232/sun_kbd.h"
|
|
//#include "bus/rs232/terminal.h"
|
|
#include "cpu/i386/i386.h"
|
|
#include "cpu/mcs51/i80c51.h"
|
|
#include "machine/fdc37c93x.h"
|
|
#include "machine/i82443bx_host.h"
|
|
#include "machine/i82371eb_isa.h"
|
|
#include "machine/i82371eb_ide.h"
|
|
#include "machine/i82371eb_acpi.h"
|
|
#include "machine/i82371eb_usb.h"
|
|
#include "machine/pci.h"
|
|
#include "machine/pci-smbus.h"
|
|
#include "video/voodoo_pci.h"
|
|
|
|
namespace {
|
|
|
|
#define PCI_J4D2_ID "pci:0d.0"
|
|
#define PCI_J4D1_ID "pci:0e.0"
|
|
#define PCI_J4C1_ID "pci:0f.0"
|
|
#define PCI_J4B1_ID "pci:10.0"
|
|
// J4E1
|
|
#define PCI_AGP_ID "pci:01.0:00.0"
|
|
|
|
class midway_quicksilver2_state : public driver_device
|
|
{
|
|
public:
|
|
midway_quicksilver2_state(const machine_config &mconfig, device_type type, const char *tag)
|
|
: driver_device(mconfig, type, tag)
|
|
, m_maincpu(*this, "maincpu")
|
|
, m_voodoo2(*this, PCI_AGP_ID)
|
|
{
|
|
}
|
|
|
|
void midqslvr(machine_config &config);
|
|
|
|
private:
|
|
required_device<pentium2_device> m_maincpu;
|
|
// optional for debugging ...
|
|
optional_device<voodoo_2_pci_device> m_voodoo2;
|
|
|
|
void midqslvr_map(address_map &map) ATTR_COLD;
|
|
|
|
static void superio_config(device_t *device);
|
|
};
|
|
|
|
class midway_graphite_state : public driver_device
|
|
{
|
|
public:
|
|
midway_graphite_state(const machine_config &mconfig, device_type type, const char *tag)
|
|
: driver_device(mconfig, type, tag)
|
|
, m_maincpu(*this, "maincpu")
|
|
{ }
|
|
|
|
void graphite(machine_config &config);
|
|
|
|
private:
|
|
required_device<pentium3_device> m_maincpu;
|
|
|
|
void graphite_map(address_map &map) ATTR_COLD;
|
|
};
|
|
|
|
|
|
|
|
void midway_quicksilver2_state::midqslvr_map(address_map &map)
|
|
{
|
|
map.unmap_value_high();
|
|
}
|
|
|
|
static void isa_internal_devices(device_slot_interface &device)
|
|
{
|
|
device.option_add("fdc37m707", FDC37M707);
|
|
}
|
|
|
|
void midway_quicksilver2_state::superio_config(device_t *device)
|
|
{
|
|
fdc37m707_device &fdc = *downcast<fdc37m707_device *>(device);
|
|
fdc.set_sysopt_pin(0);
|
|
fdc.gp20_reset().set_inputline(":maincpu", INPUT_LINE_RESET);
|
|
fdc.gp25_gatea20().set(":pci:07.0", FUNC(i82371eb_isa_device::a20gate_w));
|
|
fdc.irq1().set(":pci:07.0", FUNC(i82371eb_isa_device::pc_irq1_w));
|
|
fdc.irq8().set(":pci:07.0", FUNC(i82371eb_isa_device::pc_irq8n_w));
|
|
#if 0
|
|
fdc.txd1().set(":serport0", FUNC(rs232_port_device::write_txd));
|
|
fdc.ndtr1().set(":serport0", FUNC(rs232_port_device::write_dtr));
|
|
fdc.nrts1().set(":serport0", FUNC(rs232_port_device::write_rts));
|
|
fdc.txd2().set(":serport1", FUNC(rs232_port_device::write_txd));
|
|
fdc.ndtr2().set(":serport1", FUNC(rs232_port_device::write_dtr));
|
|
fdc.nrts2().set(":serport1", FUNC(rs232_port_device::write_rts));
|
|
#endif
|
|
}
|
|
|
|
void midway_quicksilver2_state::midqslvr(machine_config &config)
|
|
{
|
|
PENTIUM2(config, m_maincpu, 100'000'000); // Celeron, downclocked for debugging
|
|
m_maincpu->set_addrmap(AS_PROGRAM, &midway_quicksilver2_state::midqslvr_map);
|
|
//m_maincpu->set_addrmap(AS_IO, &midway_quicksilver2_state::midqslvr_io);
|
|
m_maincpu->set_irq_acknowledge_callback("pci:07.0:pic8259_master", FUNC(pic8259_device::inta_cb));
|
|
m_maincpu->smiact().set("pci:00.0", FUNC(i82443bx_host_device::smi_act_w));
|
|
|
|
P87C552(config, "iocpu", 16'000'000).set_disable();
|
|
|
|
PCI_ROOT(config, "pci", 0);
|
|
I82443BX_HOST(config, "pci:00.0", 0, "maincpu", 64*1024*1024);
|
|
I82443BX_BRIDGE(config, "pci:01.0", 0 ); //"pci:01.0:00.0");
|
|
//I82443BX_AGP (config, "pci:01.0:00.0");
|
|
|
|
i82371eb_isa_device &isa(I82371EB_ISA(config, "pci:07.0", 0, m_maincpu, true));
|
|
isa.boot_state_hook().set([](u8 data) { /* printf("%02x\n", data); */ });
|
|
isa.smi().set_inputline("maincpu", INPUT_LINE_SMI);
|
|
isa.a20m().set_inputline("maincpu", INPUT_LINE_A20);
|
|
|
|
i82371eb_ide_device &ide(I82371EB_IDE(config, "pci:07.1", 0, m_maincpu));
|
|
ide.irq_pri().set("pci:07.0", FUNC(i82371eb_isa_device::pc_irq14_w));
|
|
ide.irq_sec().set("pci:07.0", FUNC(i82371eb_isa_device::pc_mirq0_w));
|
|
|
|
I82371EB_USB (config, "pci:07.2", 0);
|
|
I82371EB_ACPI(config, "pci:07.3", 0);
|
|
ACPI_PIIX4 (config, "pci:07.3:acpi");
|
|
SMBUS (config, "pci:07.3:smbus", 0);
|
|
|
|
ISA16_SLOT(config, "board4", 0, "pci:07.0:isabus", isa_internal_devices, "fdc37m707", true).set_option_machine_config("fdc37m707", superio_config);
|
|
ISA16_SLOT(config, "isa1", 0, "pci:07.0:isabus", pc_isa16_cards, nullptr, false);
|
|
ISA16_SLOT(config, "isa2", 0, "pci:07.0:isabus", pc_isa16_cards, nullptr, false);
|
|
|
|
// YMF740G goes thru "pci:0c.0"
|
|
// Expansion slots, mapping SVGA for debugging
|
|
// TODO: all untested, check clock
|
|
// TODO: confirm Voodoo going in AGP slot
|
|
#if 1
|
|
VOODOO_2_PCI(config, m_voodoo2, 0, m_maincpu, "screen"); // "pci:0d.0" J4D2
|
|
m_voodoo2->set_fbmem(2);
|
|
m_voodoo2->set_tmumem(4, 4);
|
|
m_voodoo2->set_status_cycles(1000);
|
|
|
|
// TODO: fix legacy raw setup here
|
|
screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
|
|
screen.set_refresh_hz(57);
|
|
screen.set_size(640, 480);
|
|
screen.set_visarea(0, 640 - 1, 0, 480 - 1);
|
|
screen.set_screen_update(PCI_AGP_ID, FUNC(voodoo_2_pci_device::screen_update));
|
|
#endif
|
|
// "pci:0d.0" J4D2
|
|
// "pci:0e.0" J4D1
|
|
PCI_SLOT(config, "pci:1", pci_cards, 14, 0, 1, 2, 3, "virge");
|
|
}
|
|
|
|
// Graphite runs on incompatible HW, consider splitting if things starts to get hairy ...
|
|
|
|
void midway_graphite_state::graphite_map(address_map &map)
|
|
{
|
|
map(0x00000000, 0x0009ffff).ram();
|
|
// map(0x000a0000, 0x000bffff).ram();
|
|
map(0x000e0000, 0x000fffff).rom().region("bios", 0x20000);
|
|
map(0xfffc0000, 0xffffffff).rom().region("bios", 0);
|
|
}
|
|
|
|
void midway_graphite_state::graphite(machine_config &config)
|
|
{
|
|
PENTIUM3(config, m_maincpu, 100'000'000); // downclocked for debugging
|
|
m_maincpu->set_addrmap(AS_PROGRAM, &midway_graphite_state::graphite_map);
|
|
|
|
PCI_ROOT(config, "pci", 0);
|
|
// ...
|
|
}
|
|
|
|
|
|
ROM_START( hydrthnd )
|
|
ROM_REGION32_LE(0x80000, "pci:07.0", 0)
|
|
ROM_LOAD( "lh28f004sct.u8b1", 0x000000, 0x080000, CRC(ab04a343) SHA1(ba77933400fe470f45ab187bc0d315922caadb12) )
|
|
|
|
ROM_REGION( 0x2000, "iocpu", 0 ) /* Diego board CY7C63513 MCU code */
|
|
ROM_LOAD( "diego.u8", 0x0000, 0x2000, NO_DUMP ) // 8KB internal EPROM
|
|
|
|
DISK_REGION( "pci:07.1:ide1:0:hdd" )
|
|
DISK_IMAGE( "hydro", 0, BAD_DUMP SHA1(d481d178782943c066b41764628a419cd55f676d) )
|
|
ROM_END
|
|
|
|
ROM_START( hydrthnd101b )
|
|
ROM_REGION32_LE(0x80000, "pci:07.0", 0)
|
|
ROM_LOAD( "lh28f004sct.u8b1", 0x000000, 0x080000, CRC(ab04a343) SHA1(ba77933400fe470f45ab187bc0d315922caadb12) )
|
|
|
|
ROM_REGION( 0x2000, "iocpu", 0 ) /* Diego board CY7C63513 MCU code */
|
|
ROM_LOAD( "diego.u8", 0x0000, 0x2000, NO_DUMP ) // 8KB internal EPROM
|
|
|
|
DISK_REGION( "pci:07.1:ide1:0:hdd" )
|
|
DISK_IMAGE( "hydro_101b", 0, SHA1(182a7966c40676031c92dbfbd1b8e594a505a930) )
|
|
ROM_END
|
|
|
|
ROM_START( hydrthnd100d )
|
|
ROM_REGION32_LE(0x80000, "pci:07.0", 0)
|
|
ROM_LOAD( "lh28f004sct.u8b1", 0x000000, 0x080000, CRC(ab04a343) SHA1(ba77933400fe470f45ab187bc0d315922caadb12) )
|
|
|
|
ROM_REGION( 0x2000, "iocpu", 0 ) /* Diego board CY7C63513 MCU code */
|
|
ROM_LOAD( "diego.u8", 0x0000, 0x2000, NO_DUMP ) // 8KB internal EPROM
|
|
|
|
DISK_REGION( "pci:07.1:ide1:0:hdd" )
|
|
DISK_IMAGE( "hydro_100d", 0, SHA1(5462f7197b3c510b791093e938a614e706aaed4a) )
|
|
ROM_END
|
|
|
|
ROM_START( offrthnd )
|
|
ROM_REGION32_LE(0x80000, "pci:07.0", 0)
|
|
ROM_LOAD( "lh28f004sct.u8b1", 0x000000, 0x080000, CRC(ab04a343) SHA1(ba77933400fe470f45ab187bc0d315922caadb12) )
|
|
|
|
ROM_REGION( 0x2000, "iocpu", 0 ) /* Magicbus board CY7C63513 MCU code */
|
|
ROM_LOAD( "magicbus.u18", 0x0000, 0x2000, NO_DUMP ) // 8KB internal EPROM
|
|
|
|
DISK_REGION( "pci:07.1:ide1:0:hdd" )
|
|
DISK_IMAGE( "offrthnd", 0, BAD_DUMP SHA1(d88f1c5b75361a1e310565a8a5a09c674a4a1a22) )
|
|
ROM_END
|
|
|
|
ROM_START( arctthnd )
|
|
ROM_REGION32_LE(0x40000, "bios", ROMREGION_ERASEFF)
|
|
ROM_LOAD( "m29f002bt.u6", 0x000000, 0x040000, CRC(012c9290) SHA1(cdee6f19d5e5ea5bb1dd6a5ec397ac70b3452790) )
|
|
|
|
ROM_REGION( 0x2000, "iocpu", 0 ) /* Substitute board 87C552 MCU code */
|
|
ROM_LOAD( "87c552.bin", 0x0000, 0x2000, NO_DUMP ) // 8KB internal EPROM
|
|
|
|
DISK_REGION( "pci:07.1:ide1:0:hdd" )
|
|
DISK_IMAGE( "arctthnd", 0, SHA1(f4373e57c3f453ac09c735b5d8d99ff811416a23) )
|
|
ROM_END
|
|
|
|
ROM_START( ultarctc )
|
|
ROM_REGION32_LE(0x40000, "bios", ROMREGION_ERASEFF)
|
|
ROM_LOAD( "m29f002bt.u6", 0x000000, 0x040000, CRC(012c9290) SHA1(cdee6f19d5e5ea5bb1dd6a5ec397ac70b3452790) )
|
|
|
|
ROM_REGION( 0x2000, "iocpu", 0 ) /* Substitute board 87C552 MCU code */
|
|
ROM_LOAD( "87c552.bin", 0x0000, 0x2000, NO_DUMP ) // 8KB internal EPROM
|
|
|
|
DISK_REGION( "pci:07.1:ide1:0:hdd" )
|
|
DISK_IMAGE( "uarctict", 0, SHA1(8557a1d7ae8dc41c879350cb1c228f4c27a0dd09) )
|
|
ROM_END
|
|
|
|
/* This is an update CD. This CD along with a dongle was released as a kit to update a normal Arctic Thunder to Ultimate.
|
|
Ultimate Arctic Thunder requires a dongle to work. If the dongle isn't detected both during and after installation,
|
|
the game will revert back to normal Arctic Thunder. */
|
|
ROM_START( ultarctcup )
|
|
ROM_REGION32_LE(0x40000, "bios", ROMREGION_ERASEFF)
|
|
ROM_LOAD( "m29f002bt.u6", 0x000000, 0x040000, CRC(012c9290) SHA1(cdee6f19d5e5ea5bb1dd6a5ec397ac70b3452790) )
|
|
|
|
ROM_REGION( 0x2000, "iocpu", 0 ) /* Substitute board 87C552 MCU code */
|
|
ROM_LOAD( "87c552.bin", 0x0000, 0x2000, NO_DUMP ) // 8KB internal EPROM
|
|
|
|
DISK_REGION( "pci:07.1:ide1:0:hdd" )
|
|
DISK_IMAGE( "uarctict", 0, SHA1(8557a1d7ae8dc41c879350cb1c228f4c27a0dd09) )
|
|
|
|
// TODO: eventually needs mountable option
|
|
DISK_REGION( "cd" )
|
|
DISK_IMAGE_READONLY( "040503_1309", 0, SHA1(453adb81e204b0580ad02c2d98f68525757ec2a1) )
|
|
// sourced from these
|
|
// ROM_LOAD( "040503_1309.CUE", 0x0000, 0x000004d, CRC(4a9e2de5) SHA1(04d3d90ad4b235c0ac4606557e16a1410d018fa9) )
|
|
// ROM_LOAD( "040503_1309.BIN", 0x0000, 0x6bd9960, CRC(48a63422) SHA1(9d1cacf07526c5bddf4205c667a9010802f74859) )
|
|
|
|
ROM_END
|
|
|
|
} // Anonymous namespace
|
|
|
|
|
|
// there are almost certainly multiple versions of these; updates were offered on floppy disk. The version numbers for the existing CHDs are unknown.
|
|
GAME(1999, hydrthnd, 0, midqslvr, 0, midway_quicksilver2_state, empty_init, ROT0, "Midway Games", "Hydro Thunder", MACHINE_NO_SOUND | MACHINE_NOT_WORKING)
|
|
GAME(1999, hydrthnd101b,hydrthnd, midqslvr, 0, midway_quicksilver2_state, empty_init, ROT0, "Midway Games", "Hydro Thunder (v1.01b)", MACHINE_NO_SOUND | MACHINE_NOT_WORKING)
|
|
GAME(1999, hydrthnd100d,hydrthnd, midqslvr, 0, midway_quicksilver2_state, empty_init, ROT0, "Midway Games", "Hydro Thunder (v1.00d)", MACHINE_NO_SOUND | MACHINE_NOT_WORKING)
|
|
|
|
GAME(2000, offrthnd, 0, midqslvr, 0, midway_quicksilver2_state, empty_init, ROT0, "Midway Games", "Offroad Thunder", MACHINE_NO_SOUND | MACHINE_NOT_WORKING)
|
|
|
|
GAME(2001, arctthnd, 0, graphite, 0, midway_graphite_state, empty_init, ROT0, "Midway Games", "Arctic Thunder (v1.002)", MACHINE_NO_SOUND | MACHINE_NOT_WORKING)
|
|
|
|
GAME(2001, ultarctc, 0, graphite, 0, midway_graphite_state, empty_init, ROT0, "Midway Games", "Ultimate Arctic Thunder", MACHINE_NO_SOUND | MACHINE_NOT_WORKING)
|
|
GAME(2004, ultarctcup, ultarctc, graphite, 0, midway_graphite_state, empty_init, ROT0, "Midway Games", "Ultimate Arctic Thunder Update CD ver 1.950 (5/3/04)", MACHINE_NO_SOUND | MACHINE_NOT_WORKING)
|