marqs
238cf0b285
update epcq_controller_mod to epcq_controller2
2020-11-10 19:46:07 +02:00
Ari Sundholm
32bbc49bf0
Userdata export: Fix menu behavior, particularly with the OSD.
...
The behavior of the menu option was all over the place, and would
easily leave the OSD in a weird state, requiring the user to blindly
do something that completely redraws the OSD.
Fix this by making the behavior similar to that of the userdata import
feature, with the difference of giving a more specific error message
when something goes wrong.
2020-11-07 01:39:06 +02:00
Ari Sundholm
b890446e3d
Implement userdata export.
...
A very simple implementation, as we are very short on remaining
block RAM. Simply blindly copies the entire userdata area to the
SD card. This may subject the SD card to some extra wear, as well
as potentially read-disturb some Flash memory pages, but this would
require more code.
2020-11-06 15:06:29 +02:00
marqs
9c5e7b5b83
advanced OSD implementation
2020-10-05 23:05:43 +03:00
marqs
9d496383c3
optimize clock network
...
* replace all clock muxes with a single cycloneive_clkctrl to minimize skew
* use a single dynamically configured PLL to comply with cycloneive_clkctrl
2019-10-06 23:54:32 +03:00
marqs
6266976114
first OSD implementation
2019-10-03 02:03:43 +03:00
marqs
c7fc62c038
use symlinks for SW IP BSP files
2019-09-30 18:56:27 +03:00
marqs
5e0277fb48
add Panasonic hack for improving line count tolerance with line2x
2019-07-01 19:15:57 +03:00
marqs
9e81fb5922
Scanline updates and fixes
...
* Enable overlay pattern customization
* Fix non-alternating mode with line4x interlace sources
* Add alternate interval option for pre-linedoubled sources
2019-03-23 00:09:46 +02:00
marqs
2bac00fd82
TX improvements
...
* tweak audio parameters
* set AFE level based on PCLK
2019-01-11 00:26:40 +02:00
marqs
76d69d19bf
switch to RV32E
2018-10-30 01:31:40 +02:00
marqs
525c08a777
fix debug mode printf
2018-10-21 00:04:46 +03:00
marqs
0905620b4d
update qsys+bsp build logic and instructions
2018-10-11 00:04:32 +03:00
marqs
055a794b5e
move bitswap inside epcq_controller driver
2018-10-09 23:16:37 +03:00
marqs
7914a2ee83
clean up and update README
2018-10-08 00:37:42 +03:00
marqs
e8d5097ecb
replace nios crcCI with hw_crc32 qsys module
2018-10-07 23:38:26 +03:00
marqs
0a747cbce6
i2c_opencores: fix compilation warnings
2018-10-07 23:34:29 +03:00
marqs
4676cbd2f0
integrate zero-riscy
2018-10-06 13:19:12 +03:00
marqs
e1d8446752
BSP and sw modifications
2018-09-26 00:19:24 +03:00
marqs
22e49300df
fix line2x reverse LPF trigger
2018-04-18 23:14:24 +03:00
marqs
37650ca22b
misc improvements
...
* add character LCD backlight timeout option
* increase h.mask range
* show accurate (fpga-calculated) timings on infoscreen
2018-03-28 20:09:40 +03:00
marqs
9ad696dbc3
optimize away one pp stage and unify code formatting
2018-03-12 01:25:23 +02:00
marqs
0ab31b30b4
simplify timing constraints
2018-03-07 09:21:19 +02:00
marqs
bc1b7419f2
pcm1862: add pre-ADC gain setting
2018-03-02 23:11:52 +02:00
marqs
1cc42b808d
pcm1862: fix ADC clkdiv value and use low-latency IIR filter
2018-02-22 22:48:00 +02:00
marqs
dd4ffde231
update to Quartus 17.1
2017-12-07 21:35:08 +02:00
marqs
a24d6b0e3a
Update latency tester
...
* Enable operation with all sources
* Measure strobe length on low-persistence displays
2017-10-28 12:10:54 +03:00
marqs
1bf279b2a7
Initial latency tester implementation
2017-10-22 22:45:29 +03:00
marqs
4b21a354b4
Fix and optimize reverse lpf activation
2017-10-12 02:31:19 +03:00
paulb-nl
ac16008076
Add reverse LPF feature
...
reverse LPF can be used to mostly reverse the blur on pre 1-CHIP SNES.
For best results use 256x240 optimized mode.
2017-09-27 22:43:26 +02:00
marqs
9d14cc776e
Misc small fixes and improvements
...
* Disable 480p scanlines in auto mode
* Remove inoperable 3x/4x processing modes from 1080i list
* Add 640x512 mode to 480p group and limit 480p sampler option to 525-line modes
* Fix occasional pixel repetion issue after HDMI<->DVI TX switch
* Add "Allow upsample2x" option
* Add comments to some unclear sections
2017-08-10 00:06:35 +03:00
marqs
2cd36cdd37
Fix PCM1862 input selection.
2017-06-12 01:00:34 +03:00
marqs
2aee3294e3
Fix HDTV mode parameters
2017-05-30 21:16:03 +03:00
marqs
2577470abe
Clean up TX setup code and add compatibility options
2017-05-29 20:43:24 +03:00
marqs
d98c23c8c1
Update project files to Quartus 17.0.
2017-05-29 19:15:34 +03:00
marqs
4f36278cb7
Sync processing rewritten and some issues fixed
...
* add 480i/576i line3x/4x
* clean up RTL and SDC
* update AVI infoframe properly
* add HDMI IT content option
2017-05-18 23:36:37 +03:00
marqs
01b5fe20ee
Sync and masking improvements
...
* detect VSM=1 properly
* increase mask brightness
* add L2 optimized modes
* fix internal vsync alignment
2017-05-18 23:36:37 +03:00
marqs
97428ba3ad
Add 288p line5x modes and hotkey for quick mode select
2017-02-12 02:37:46 +02:00
marqs
2c934c9dd0
Fix line3x 4:3 mode and VGA interlace detection
2017-02-09 23:14:24 +02:00
marqs
6e043ef577
Improve input mode handling
...
* New options and better compatibility for Line5x
* Add support for 960i and 1080i
* Make TVP HPLL2x option user-selectable
2017-02-07 23:04:30 +02:00
marqs
3b19b2843c
Preliminary Line5x implementation
2017-01-29 13:02:12 +02:00
marqs
d41c7522a0
Misc updates
...
* Fix mask placement and make its brightness adjustable
* Line4x
2017-01-24 00:18:15 +02:00
marqs
434186d64e
Improve lo-res mode processing features
...
* workaround for phase shift issue on optimized modes
* add hscale option for 256x240 opt Line3x mode
* distribute video modes to groups and allow passthru for all modes
2017-01-23 00:56:17 +02:00
marqs
a03c01ca4d
Keep track of last used profile and (optionally) input
2017-01-08 12:02:32 +02:00
marqs
d77c293b70
* Clean up some FPGA code
...
* Wrap sampling phase setting
* Enable hal.enable_lightweight_device_driver_api to reduce CPU code size
2016-12-31 14:18:21 +02:00
marqs
03bf4c2c9a
Update to Quartus 16.1.
2016-12-13 20:55:10 +02:00
marqs
d548d53272
Add dedicated SPI mode option to i2c_opencores.
2016-11-05 15:39:36 +02:00
marqs
611c8763c2
Improve SD card IO.
2016-10-27 01:08:23 +03:00
marqs
f55e9a877e
SD SPI implementation finished
2016-10-21 01:19:53 +03:00
marqs
71d60144e8
Timer and SPI added.
2016-10-16 12:53:54 +03:00
