update flash imem addr for 2nd firmware

README.md

@@ -111,12 +111,16 @@ cd tools && gcc create_fw_img.c -o create_fw_img
 ~~~~
 where
 * \<rbf\> is RBF format bitstream file (typically ../output_files/ossc.rbf)
-* \<sw_image\> is SW image binary (typically ../output_files/ossc.rbf)
-* \<offset\> is target offset for the SW image binary (typically 0x50000)
+* \<sw_image\> is SW image binary (typically ../software/sys_controller/mem_init/flash.bin)
+* \<offset\> is relative offset for the SW image binary
 * \<version\> is version string (e.g. 1.20)
 * \[version_suffix\] is optional max. 8 character suffix name (e.g. "mytest")
 
-The command creates ossc_\<version\>-\<version_suffix\>.bin which can be copied to fw folder of SD card. A secondary FW (identified by specific key in header) gets automatically installed at flash address 0x00080000.
+The primary firmware has FPGA bitstream at offset 0x0 and SW image at 0x50000 so the command is typically as follows:
+~~~~
+./create_fw_img ../output_files/ossc.rbf ../software/sys_controller/mem_init/flash.bin 0x50000 1.21 mytest
+~~~~
+The command creates ossc_\<version\>-\<version_suffix\>.bin which can be copied to fw folder of SD card. A secondary FW (identified by specific key in header) gets automatically installed at flash base address 0x00080000.
 
 Debugging
 --------------------------

ossc.cof

@@ -7,10 +7,11 @@
 	<width>1</width>
 	<mode>7</mode>
 	<sof_data>
+		<start_address>00080000</start_address>
 		<user_name>Page_0</user_name>
 		<page_flags>1</page_flags>
 		<bit0>
-			<sof_filename>output_files/ossc.sof<compress_bitstream>1</compress_bitstream></sof_filename>
+			<sof_filename>output_files/ossc.sof<compress_bitstream>1</compress_bitstream></sof_filename> 
 		</bit0>
 	</sof_data>
 	<hex_block>

rtl/ossc.v

@@ -377,7 +377,7 @@ sys sys_inst(
     .reset_po_reset_n                       (po_reset_n),
     .ibex_0_ndm_ndmreset_o                  (ndmreset_req),
     .ibex_0_ndm_ndmreset_ack_i              (ndmreset_ack),
-    .ibex_0_config_boot_addr_i              (32'h02050000),
+    .ibex_0_config_boot_addr_i              (32'h020D0000),
     .ibex_0_config_core_sleep_o             (),
     .master_0_master_reset_reset            (jtagm_reset_req),
     .i2c_opencores_0_export_scl_pad_io      (scl),

scripts/rv-reprogram.tcl

@@ -1,6 +1,6 @@
 # flash details
 set flash_base                  0x02000000
-set flash_imem_offset           0x00050000
+set flash_imem_offset           0x000D0000
 set flash_imem_base             [format 0x%.8x [expr $flash_base + $flash_imem_offset]]
 set flash_secsize               65536
 

software/sys_controller/Makefile

@@ -1150,8 +1150,8 @@ src/userdata_sjis.c: src/userdata.c
 	iconv -f UTF-8 -t SHIFT-JIS src/userdata.c > src/userdata_sjis.c
 
 mem_init/flash.hex: sys_controller.elf
-	$(RV_OBJCOPY) --change-addresses -0x02050000 -O binary --gap-fill 0 $< mem_init/flash.bin
-	$(RV_OBJCOPY) --change-addresses -0x02050000 -O ihex --gap-fill 0 $< mem_init/flash.hex
+	$(RV_OBJCOPY) --change-addresses -0x020D0000 -O binary --gap-fill 0 $< mem_init/flash.bin
+	$(RV_OBJCOPY) --change-addresses -0x020D0000 -O ihex --gap-fill 0 $< mem_init/flash.hex
 	mkdir -p mem_init/chunks
 	rm -f mem_init/chunks/*
 	split -d -b 1024 -a 4 mem_init/flash.bin mem_init/chunks/flash.

software/sys_controller/fatfs/source/diskio.c

@@ -99,7 +99,7 @@ DRESULT disk_write (
         return STA_NOINIT;
 
     for (i=0; i<count; i++) {
-        res = SD_Write(&sdcard_dev, (void*)&buff[i*SD_BLK_SIZE], sector);
+        res = SD_Write(&sdcard_dev, (void*)&buff[i*SD_BLK_SIZE], sector+i);
         if (res != SD_OK)
             return RES_PARERR;
     }

software/sys_controller/link.common.ld

@@ -8,7 +8,7 @@ __DYNAMIC  =  0;
    Last 16 flash sectors reserved for userdata (16x 64KB). */
 MEMORY
 {
-    flash_imem : ORIGIN = 0x02050000, LENGTH = 196608
+    flash_imem : ORIGIN = 0x020D0000, LENGTH = 196608
     dataram    : ORIGIN = 0x00010000, LENGTH = 16384
 }
 

tools/create_fw_img.c

@@ -161,7 +161,7 @@ int main(int argc, char **argv)
         return -1;
     }
 
-    snprintf(hdr.fw_key, FW_KEY_SIZE+1, "OSSC");
+    snprintf(hdr.fw_key, FW_KEY_SIZE+1, "OSS2");
     hdr.version_major = (uint8_t)fw_version_major;
     hdr.version_minor = (uint8_t)fw_version_minor;
     snprintf(hdr.version_suffix, FW_SUFFIX_MAX_SIZE, legacy_mode ? ((argc == 4) ? argv[3] : "") : ((argc == 6) ? argv[5] : ""));