* Ported Cirrus Logic CS8900A Crystal LAN MAC emulation from VICE and hooked it up to Apple II card device.
* Adds Ethernet networking support for Apple IIgs.
- Rewrite memory system, now allows supporting expansion devices and better prepared for contention emulation
- Add expansion interfaces for rear expansion, drive ports and mouse
- Now supports the following rear expansion devices:
* Blue Alpha Sound Sampler
* Dallas Clock
* 1 Mb Interface
* SAMBUS 4-slot Expansion Interface (with clock)
* SID Interface (6581 and 8580 variants)
* S.P.I. SAM Parallel Interface
* Voicebox
- Added support for the Atom HDD interface, used in place of a floppy drive
- Simplified and cleaned up driver
- Temporarily deactivated joystick code, interferes with the keyboard
Available keyboards are us (M0110, U.S.), gb (M0110B, British), fr
(M0110F, French), pad (M0120F, numeric keypad with passthrough port)
and plus (M0110A, U.S. with integrated numeric keypad). The mac128k,
mac512k and mac512ke drivers default to the numeric keypad with the
U.S. keyboard connected to the passthrough port; the macplus driver
defaults to the U.S. keyboard with integrated numeric keypad.
Note that the numeric keypad may seem strange. Four of the operators
work as cursor arrows if you don't hold shift. There is a comma on one
of the keys, but by the time System 6 was released, Apple had decided
an equals sign was more useful, so that's what it will produces on
newer system versions. The U.S. keyboard with integrated numeric
keypad emulates these aspects of the stand-alone keypad - pressing the
operator keys on the keypad sends fake shit key down/up events, and
using the arrow keys while holding shift will produces operator
characters rather than selecting text.
The ISO layout keyboards (M0110B and M0110F) produce different scan
codes to the ANSI keyboards (M0110 and M0110A) but they don't report a
different identification byte. To use an ISO keyboard, you must open
the Keyboard control panel and change the layout to International (and
change it back to Domestic if you switch back to an ANSI keyboard).
This doesn't actually work at the moment due to issues with 6522 VIA
emulation, but it will work with macplus sys603 if applied on top of
revision 963a2c166d.
-----------------------------------------------------------------------
* Support Colecovision Megacart.
Assume that a rom file that is more than 32K in size is a megacart
and that it should be bankswitched using Megacart protocol.
* Put megacart functionality in its own cartridge type.
--------------------
MDT 60 Video Display Terminal [Bitsavers, AJR]
z29: Add skeleton for undumped keyboard; try (and fail) to make this work with the MDT 60 keyboard instead
z22: Separate driver (nw)
Changes:
- added known dump checksums of 1101 BIOS
- high-level emulation of GPIB disk devices
- partial implementation of DMA (currently ignores ACCRQ so devices must have zero latency in order for it to work)
- serial is now properly memory-mapped
- modem stub in order to make system properly ignore modem device
- it now boots without any patches and debug scripts
- merged #6597 (needed in order to make disk devices work)
Still not implemented:
- RTC/MACHINE_ID
- modem
- has problems with multiple disk devices working simultaneously (possibly BIOS bug because this BIOS had some problems with that on real device)
- PAC2 is now a separate bus with slot devices
- Kanji ROM and RAM PAC2 expansions are no longer built into pasopia7, but may be configured as slot options
- RAM PAC2 expansion made nonvolatile and provided in multiple sizes
- Two PAC2 slots added to pasopia
* hp80: added HP82939 serial I/O module.
Fixed a small bug in INS8250 that prevented module self-test to pass.
Improved the interrupt handling of hp80 systems.
* hp80: changed scheduling to use "set_perfect_quantum"
- Make second 8355 into ROM expansion slot that can load custom 8755 programs
- Add software list for expansion ROMs, including Peter Naszvadi's version of Mastermind
- Add optional TTY interface
- Improve accuracy of button labels and change key bindings
- Add vectored interrupt and soft reset buttons
* hp80: refactored optional ROM device as requested in issue #5839
* hp9825: refactored optional ROM device as requested in issue #5839
* hp9845: refactored optional ROM device as requested in issue #5839
- Added slot interface for internal expansion boards.
- Added BBC Master cartridge slot interface to allow implementation of more complex cartridges, including Electron cartridge devices.
- Removed Sideways RAM configuration option, to be re-implemented as internal boards.
- Empty BBC Master cartridge sockets return video data on data bus.
* Changed emu_fatalerror to use util::string_format semantics
* Fixed some incorrectly marked up stuff in build scripts
* Make internal layout compression type a scoped enum (only zlib is supported still, but at least the values aren't magic numbers now)
* Fixed memory leaks in Xbox USB
* There can only be one "perfect quantum" device - enforce that only the root machine can set it, as allowing subdevices to will cause weird issues with slot cards overiding it
* Allow multiple devices to set maximum quantum and use the most restrictive one (it's maximum quantum, it would be minimum interleave)
* Got rid of device_slot_card_interface as it wasn't providing value
* Added a helper template to reduce certain kinds of boilerplate in slots/buses
* Cleaned up some particularly bad slot code (plenty more of that to do), and made some slots more idiomatic
This patch gets it running, and splits it into two front ends, one
being a rs232 bus slot so that is can be used as a terminal option. It
adds the MCM66750 character generator, and implements the MC6845 row
update function. Most of the I/O has been worked out with help from
the CT-82 user manual. The various screen formats and the graphics
modes appear to be working and plausible. Printer support has been
added, and a beeper.
* hp9825: optional ROM cartridges added (9825b only, ATM)
* hp9825: optional ROMs added to 9825t, added support for banked ROMs
@5c00, separated RAM & ROM spaces in 9825t
* hp9885: added missing post-amble when writing sectors on disk
* hp9825: added acknowledgments to comments (nw)
* hp9825: changes requested by V.Crabb (nw)
* spectrum bus : rename beta.cpp to beta128.cpp as the original beta is somewhat different (nw)
* (nw)
* start making a device for the actual original beta disk interfaces (nw)
* flesh out beta stuff a bit (nw)
Split out the floppy disk controller from the swtpc09 machine, adding it to
the ss50 interface. The DC5 is compatible with both the SWTPC 6800 and 6809
systems, supporting the 4 and 16 byte I/O interfaces respectively, via a
jumper setting, so can be used on the MAME swtpc and swtpc09 machines. The
DC5, like the DC4, supports double sided and density disks, and claimed
backward compatibility with the DC1, DC2 and DC3.
Split out the PIA IDE hard disk interface from the swtpc09 machine. This
support appears to have been incomplete or to have bit rotten, and has been
updated and tested lightly with FLEX9.
