* new NOT WORKING
---
Play TV Buckmasters Huntin' (NTSC) [Sean Riddle, Peter Wilhelmsen]
(gun needs mapping)
* new NOT WORKING
---
Track & Field Challenge [Sean Riddle, Clawgrip]
HELP! can't figure out what architecture this is, need to identify CPU type etc.
* rad_hnt digital controls (nw)
* more digital inputs (nw)
* change CPU type to G65816 based on feedback
* improve notes (nw)
- Add custom keyboard port and emulate most of the Expanded Typewriter Keyboard
- Add unidirectional printer port
- Use addressable latch devices to control various things, including disabling display during RAM test
- Hack to pass non-volatile memory test on uts10
* new NOT WORKING ClickStart [Sean Riddle, Clawgrip, TeamEurope] + a Software List for it
seems to be something missing, jumps to outside of code area, maybe secondary small internal ROM of CPU. I did think the dumps were half size for various reasons, but there is a checksum in the footer of each one that matches the data (even if another checksum in the header for some of them we can't match) Possible BIOS is wrong tho as that checksum in the footer doesn't match by quite a significant amount.
most games show something just by putting a 'RET' opcode in the upper areas it attempts to jump to.
Ryan credited in driver since it's more or less just a stripped down copy of vsmile.cpp
* more correct (although does less now because of extra checks in new code) (nw)
* (nw)
* (nw)
* XaviX work
new Software List items [Sean Riddle, David Haywood]
ekara_japan_d:dc0002 BAT Volume 6 (Japan) (DC0002-BAT)
ekara_japan_d:dc0005 TV Pop Volume 9 (Japan) (DC0005-TPJ)
ekara_japan_p:pc0001 BHT Volume 4 (Japan) (PC0001-BHT)
ekara_japan_p:pc0003 ENB Volume 1 (Japan) (PC0003-ENB)
ekara_japan_g:gc0001 BAT Volume 1 (Japan) (GC0001-BAT)
ekara_japan_g:gc0016 TV Pop Volume 5 (Japan) (GC0016-TPJ)
ekara_japan_web:ekaraweb12 e-kara Web cartridge 12M (blank) (Japan)
new clones
e-kara (US?, NTSC, set 2) [Sean Riddle]
enable support for 'p' type cartridges for use with ddrfammt [David Haywood]
various documentation improvements [Sean Riddle, David Haywood]
(there are also 3 bad dumps, currently commented out, will replace later)
* improved filenames (nw)
* for later (nw)
* checkpoint (nw)
* seeprom stuff (nw)
* (nw)
* correctly saves, does not correctly reload, also promote popira and ddrfammt to working
* new Software List entries [Sean Riddle, David Haywood]
ekara_japan:ec0001 J-Pop Mix Volume 1 (Japan) (EC0001-JPM)
ekara_japan:ec0032 ANM Volume 2 (Japan) (EC0032-ANM)
ekara_japan:ec0037 ENK Volume 4 (Japan) (EC0037-ENK)
ekara_japan:ec0046 J-Pop Mix Volume 20 (Japan) (EC0046-JPM)
ekara_japan:ec0005 J-Pop Mix Volume 5 (Japan) (EC0005-JPM)
ekara_japan:ec0007 1976-78 Volume 1 (Japan) (EC0007-G76)
ekara_japan:ec0079 ETZ (Japan) (EC0079-ETZ)
ekara_japan:ec0082 Matthew's Best Hit Selection (Japan) (EC0082-MBH)
ekara_japan:ec0009 ANM Volume 1 (Japan) (EC0009-ANM)
ekara_japan_en:en3 EN-3 (Japan)
ekara_japan_m:mc0013 KSM Mini Volume 5 (Japan) (MC0005-KSM)
ekara_japan_s:sc0012 SAI (series 3) Volume 3 (Japan) (SC0012-SAI)
ekara_japan_s:sc0004 SAI (series 1) Volume 1 (Japan) (SC0004-SAI)
ekara_japan_g:gc0002 BHT Volume 1 (Japan) (GC0002-BHT)
ekara_japan_g:gc0003 BAT Volume 2 (Japan) (GC0003-BAT)
ekara_japan_g:gc0004 BHT Volume 2 (Japan) (GC0004-BHT)
ekara_japan_p:pc0004 BHT Volume 7 (Japan) (PC0004-BHT)
* (nw)
* notes (nw)
* (nw)
* this register seems to be r/w (nw)
* fix crash in popira when pausing (requires register readback)
* save state stuff (nw)
* give excite fishing some inputs while I'm making misc minor changes (nw)
* also promote the Nostalgia games, and Card Night, as they have simple digital inputs and seem to work
* (nw)
* copy+paste modernization
* 2 more dumps (nw)
* doesn't seem to have an seeprom (nw)
* preliminary taikodp controls (nw)
* P4 uses SEEPROM (nw)
* rejig some bases (nw)
-sound/discrete, okim6295: Removed MCFG macros. [Ryan Holtz]
-norautp, osi, audio/mario: Removed MACHINE_CONFIG macros. [Ryan Holtz]
-vsmile: Split into its own driver from vii.cpp. [Ryan Holtz]
-vii: Fixed broken controller inputs. [Ryan Holtz]
-konamim2: Massive update. Most games work, but are still marked non-working due to rare MAME crashes in the PPC DRC. [Phil Bennett, Ryan Holtz]
Marked as non-working because the correct terminal isn't emulated, so we
can't fully verify that everything works. Run it with '-ser terminal' to
see the garbled output.
This also adds the clone Grundig FL-100.
* Added new driver: HP 3478A Multimeter
WIP, machine not working, skeleton, highly incomplete. Compiles, that's
about all.
* hp3478a: implement ROM banking
code runs "properly" at least to the CAL RAM check (fails, RAM not
implemented)
* hp3478a: some IO work
Interpret CS lines for external accesses (GPIB, CAL RAM, DIP switches).
Also, remove MCFG_ stuff
Also, use logmacro.h stuff
* hp3478a: partial emulation of LCD
The main CPU has a serial link to the LCD module. This WIP splits
commands and data mostly successfully (still some bogus shifting which
would be fairly easy to ignore). None of the commands are implemented
yet, and no actual display is generated yet.
Includes unrelated tweak : only change bank when the A12 line changes.
* hp3478a: added LCD rendering !
code shamelessly stolen from tranz330 and roc10937 drivers.
Not clickable yet.
* hp3478a: implement CAL NVRAM
Finally. IO mapping has provisions for the DIP switches as well as i8291
GPIB interface registers.
* hp3478a: improve LCD rendering
Remove some artifacts: with the LCD "not selected", some data is sent on IWA (probably
to purge a shift register ?) but was parsed with the last m_lcdiwa
state. Reset this everytime PWO is deselected.
Also parse decimal point, comma and "all segments".
* hp3478a: implement keypad
* hp3478a: CAL switch to write-protect NVRAM
* hp3478a: implement DIP switches
* hp3478a: fix self-test reset freeze (missing WDT)
There is an external WDT counter that is periodically reset by the CPU
in normal operation. When forcing a reset from the front panel, this
counter is allowed to overflow (20th bit, clocked at Xtal / 15), giving
a reset time of about 1.3s.
4D/20 is a Personal Iris. The IP15 ROM in this skeleton belongs to the IRIS POWER Series model 4D/4x0, so I've assumed that's what the driver should be for.
-mips3.cpp: Various changes: [Ryan Holtz]
* Added an #ifdef to display DPRINTF calls from the SGI O2 PROM.
* Switched R4000BE/LE, R4400BE, R4600BE, and R5000BE to 64-bit data bus.
* Fixed a bug that caused a crash with 64-bit data bus and the DRC.
-indy_indigo2.cpp: Moved a number of devices into HPC3. [Ryan Holtz]
-hpc3.cpp: Fixed an oversight with IRQs. [Ryan Holtz]
- Rename driver
- Remove skeleton QVT-102 we already had, add its alternate ROM to the
driver along with the keyboard MCU ROM
- Major gfx rendering update, supports all attributes but needs
verification
- Add NVRAM
