mame/src/devices/machine/am53cf96.cpp

// license:BSD-3-Clause
// copyright-holders:smf
/*
 * am53cf96.c
 *
 * AMD/NCR/Symbios 53CF96 SCSI-2 controller.
 * Qlogic FAS-236 and Emulex ESP-236 are equivalents
 *
 * References:
 * AMD Am53CF96 manual
 *
 */

#include "emu.h"
#include "am53cf96.h"
#include "bus/scsi/scsihle.h"

READ8_MEMBER( am53cf96_device::read )
{
	int rv;
	static constexpr int states[] = { 0, 0, 1, 1, 2, 3, 4, 5, 6, 7, 0 };

	if (offset == REG_STATUS)
	{
		scsi_regs[REG_STATUS] &= ~0x7;
		scsi_regs[REG_STATUS] |= states[xfer_state];
		if (xfer_state < 10)
		{
			xfer_state++;
		}
	}

	rv = scsi_regs[offset];

	if (offset == REG_FIFO)
	{
//      logerror("53cf96: read FIFO %s\n", machine().describe_context());
		return 0;
	}

//  logerror("53cf96: read reg %d = %x %s\n", reg, rv>>shift, machine().describe_context());

	if (offset == REG_IRQSTATE)
	{
		scsi_regs[REG_STATUS] &= ~0x80; // clear IRQ flag
	}

	return rv;
}

void am53cf96_device::device_timer(emu_timer &timer, device_timer_id tid, int param, void *ptr)
{
	scsi_regs[REG_IRQSTATE] = 8;    // indicate success
	scsi_regs[REG_STATUS] |= 0x80;  // indicate IRQ
	m_irq_handler(1);
}

WRITE8_MEMBER( am53cf96_device::write )
{
//  logerror("53cf96: w %x to reg %d %s\n", data, offset, machine().describe_context());

	// if writing to the target ID, cache it off for later
	if (offset == REG_STATUS)
	{
		last_id = data;
	}

	if (offset == REG_XFERCNTLOW || offset == REG_XFERCNTMID || offset == REG_XFERCNTHI)
	{
		scsi_regs[REG_STATUS] &= ~0x10; // clear CTZ bit
	}

	// FIFO
	if (offset == REG_FIFO)
	{
//      osd_printf_debug("%02x to FIFO @ %02d\n", data, fptr);
		fifo[fptr++] = data;
		if (fptr > 15)
		{
			fptr = 15;
		}
	}

	// command
	if (offset == REG_COMMAND)
	{
		//dma = (data & 0x80) ? 1 : 0;
		fptr = 0;
		switch (data & 0x7f)
		{
			case 0: // NOP
				scsi_regs[REG_IRQSTATE] = 8;    // indicate success
				xfer_state = 0;
				break;
			case 2: // reset am53cf96
				scsi_regs[REG_IRQSTATE] = 8;    // indicate success

				logerror("53cf96: reset  target ID = %d %s\n", last_id, machine().describe_context());

				xfer_state = 0;
				break;
			case 3: // reset SCSI bus
				scsi_regs[REG_INTSTATE] = 4;    // command sent OK

				reset_bus();

				xfer_state = 0;
				m_transfer_timer->adjust( attotime::from_hz( 16384 ) );
				break;
			case 0x42:      // select with ATN steps
				m_transfer_timer->adjust( attotime::from_hz( 16384 ) );
				if ((fifo[1] == 0) || (fifo[1] == 0x48) || (fifo[1] == 0x4b))
				{
					scsi_regs[REG_INTSTATE] = 6;
				}
				else
				{
					scsi_regs[REG_INTSTATE] = 4;
				}

				logerror("53cf96: command %x exec.  target ID = %d %s\n", fifo[1], last_id, machine().describe_context());

				select(last_id);
				send_command(&fifo[1], 12);
				xfer_state = 0;
				break;
			case 0x44:  // enable selection/reselection
				xfer_state = 0;
				break;
			case 0x10:  // information transfer (must not change xfer_state)
			case 0x11:  // second phase of information transfer
			case 0x12:  // message accepted
				m_transfer_timer->adjust( attotime::from_hz( 16384 ) );
				scsi_regs[REG_INTSTATE] = 6;    // command sent OK
				break;
			default:
				printf( "unsupported command %02x\n", data );
				break;
		}
	}

	// only update the register mirror if it's not a write-only reg
	if (offset != REG_STATUS && offset != REG_INTSTATE && offset != REG_IRQSTATE && offset != REG_FIFOSTATE)
	{
		scsi_regs[offset] = data;
	}
}

am53cf96_device::am53cf96_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) :
	legacy_scsi_host_adapter(mconfig, AM53CF96, tag, owner, clock),
	m_irq_handler(*this)
{
}

void am53cf96_device::device_start()
{
	legacy_scsi_host_adapter::device_start();

	m_irq_handler.resolve_safe();

	memset(scsi_regs, 0, sizeof(scsi_regs));

	fptr = 0;
	xfer_state = 0;
	last_id = -1;

	save_item( NAME( scsi_regs ) );
	save_item( NAME( fifo ) );
	save_item( NAME( fptr ) );
	save_item( NAME( xfer_state ) );
	save_item( NAME( last_id ) );

	m_transfer_timer = timer_alloc( TIMER_TRANSFER );
}

// retrieve data from the SCSI controller
void am53cf96_device::dma_read_data(int bytes, uint8_t *pData)
{
	scsi_regs[REG_STATUS] |= 0x10;  // indicate DMA finished

	read_data(pData, bytes);
}

// write data to the SCSI controller
void am53cf96_device::dma_write_data(int bytes, uint8_t *pData)
{
//  int i;

	scsi_regs[REG_STATUS] |= 0x10;  // indicate DMA finished

	write_data(pData, bytes);
}

DEFINE_DEVICE_TYPE(AM53CF96, am53cf96_device, "am53cf96", "AMD 53CF96 SCSI")