-cinematronics/thayers.cpp: Added CHD and promoted to working. [Ryan Holtz]
* Fixed periodic IRQ hookup.
* Fixed COP421 clock divisor.
* Switched to LD-V1000 by default and removed LD-PR7820 support for now.
* Switched to using logmacro and shorthand data types.
* Adjusted IRQ triggering and acknowledgement according to schematics.
-sound/ssi263hle.cpp: Added a temporary SSI-263 device which remaps SC-02 phonemes onto the SC-01's phoneme set. [Ryan Holtz]
* SSI-263 skeleton extracted from cinematronics/thayers.cpp.
-machine/ldv1000hle.cpp: Added an HLE version of the Pioneer LD-V1000 laserdisc player. [Ryan Holtz]
-machine/laserdsc.h: Added a general-purpose parallel LaserDisc player interface, to have a common class parent for LD-PR7820. [Ryan Holtz]
-sega/timetrv.cpp: Replaced timetrv2 LaserDisc image with a good capture. [Ryan Holtz, Matt Ownby, ld-decode Team]
Systems promoted to working
---------------------------
Thayer's Quest (set 1) [Ryan Holtz, Matt Ownby, ld-decode Team]
Clones promoted to working
--------------------------
Thayer's Quest (set 2) [Ryan Holtz, Matt Ownby, ld-decode Team]
* Implemented free-running timer.
* Eliminated internal header in favor of scoped enums.
* Eliminated double-dispatch switch/case in handlers, in favor of individual register handlers.
* Reworked GPIO handling for correctness.
-misc/39in1.cpp: Fixed GPIO hookup, now boots on its own. [Ryan Holtz]
* casio/ra3.cpp: Added support for software list ROM cartridges.
* sound/upd933.cpp: Clear pending interrupt flag when read.
* sound/upd933.cpp: Implemented presumed pitch modulator register.
New working systems
--------------------
Casio CZ-1 [Mastropiero, Devin Acker]
New working clones
--------------------
Casio MZ-1 (prototype) [Mastropiero, Devin Acker]
New working software items (cz1_cart.xml)
------------------------------------
Orchestra (RC-10) [Edward d-tech]
Organ / Synth. Sound / Sound Effect (RC-30) [Edward d-tech]
Piano / Guitar / Percussion (RC-20) [unknown]
psion/psion3a.cpp: Added preliminary Condor serial device for Series 3c, and added save state flag.
psion/psionhc.cpp: Removed expansion port C, and added save state flag.
psion/siena.cpp: Added preliminary Condor serial device, and added save state flag.
psion/workabout.cpp: Added save state flag.
* machine/nandflash.cpp: Only reset page address on read or program command.
* machine/nandflash.cpp: Added Samsung K9F1G08U0M and K9F2G08U0M.
* Removed now-unused machine/serflash.cpp.
This isolates the ATA disk drive interface implementation from the
physical parallel ATA device interface. The ATA Flash PC Card is no
longer a kind of parallel ATA device.
- implement stubs for i82443bx_host and i82371eb PCI devices, hooks up base PCI stubs to midway/midqslvr.cpp, misc/comebaby.cpp and misc/xtom3d.cpp
- misc/xtom3d.cpp: preliminary implementation of Oksan ROM DISK ISA card
- machine/pci-smbus.h: make map public so it can be reused by i82371eb_acpi (would otherwise fail mapping to the intended HW)
New systems marked not working
----------------------------------
Pump It Up: The 1st Dance Floor [ATR4X, Gergc, Pawprint, infamouspat, Ruubbinnexx, H4M573R, Angelo Salese, Hammy]
------------------------------
Series 3 [Nigel Barnes, The Last Psion]
New clones marked not working
-----------------------------
Pocket Book [Nigel Barnes, The Last Psion]
Series 3s [Nigel Barnes, The Last Psion]
- 3Fax Modem, 3Link Parallel Printer Interface, 3Link RS232 Serial Interface, and Siena SSD Drive.
psion/psion3a.cpp: Added wakeup with specific keys, and SIBO/Honda expansion ports.
psion/siena.cpp: Added wakeup with specific keys, and Honda expansion port.
psion/workabout.cpp: Added wakeup with specific keys.
machine/psion_asic5.cpp: Partially implemented peripheral mode.
machine/psion_asic9.cpp: Implemented memory protection, and additional external interrupt lines.
- crazyfgt, lastfght, all games in subsino2.cpp: Hook up DS2430A device, add handcrafted EEPROM data to satisfy serial protection checks and remove ROM patches that forced them to pass
- crazyfgt: Hook up coin counter
- queenbeei, queenbeesa, qbeebing, treamary: Add RTE-to-RTS ROM patches that were missing
- treamary: Change configuration to one that allows booting into title screen rather than getting stuck on initial tests
* machine/smartmed.cpp, machine/nandflash.cpp: Separated NAND Flash from smartmed.
* sound/spu.cpp: Calculate tables based on clock speed.
* machine/intelfsh.cpp: Added Intel 28F640J5 device.
* namco/namcos10.cpp: Refactored driver, and implemented MEM(M) and MEM(N) boards.
* namco/namcos10.cpp: Fixed parenting of Mr. Driller 2, and renamed Kono e Tako.
------------------------------
Series 3a [Nigel Barnes, The Last Psion]
Series 3c [Nigel Barnes, The Last Psion]
Series 3mx [Nigel Barnes, The Last Psion]
Siena [Nigel Barnes, The Last Psion]
Workabout [Nigel Barnes, The Last Psion]
Workabout mx [Nigel Barnes, The Last Psion]
New clones marked not working
-----------------------------
Pocket Book II [Nigel Barnes, The Last Psion]
Series 3a (2M) [Nigel Barnes, The Last Psion]
Series 3a (2M) (German) [Nigel Barnes, The Last Psion]
* Added callbacks for card detect, battery voltage and write protect to the PCCard interface.
* Added helpers to read/write data swapped (similar to the existing support in the ATA device).
* Add support for 2 MB and 4 MB SRAM PCMCIA models from Centennial with built-in EEPROM storage for CIS information.
* machine/linflash.cpp: Updated the linear Flash PCMCIA card emulation to use the new card detection support.
* machine/gayle.cpp: Rewrote the Amiga Gayle emulation, adding support for PCMCIA.
* Fixed an issue with Amiga interrupts arriving at the wrong time.
mpc106.cpp: fixed endianness of register access, hooked up RAM, made compatible with RAM device. [R. Belmont]
cuda.cpp: Added I2C I/O hookups. [R. Belmont]
heathrow.cpp: Hack for unknown register that imac was stuck on. [R. Belmont]
dimm_spd.cpp: New device that provides a configurable DIMM serial presence detect readback for I2C or SMBus. [R. Belmont]
* machine/ncr53c90.cpp: Renamed to ncr53c90 to avoid confusion about the actual NCR part name.
* machine/ncr53c90.cpp: Fixed 'Select w/ ATN and Stop' command in DMA mode.
* cpu/sparc: Avoid using temporary C-strings as address space names.
* machine/sun4c_mmu.cpp: Fixed l2p debugger command by removing inadvertent narrowing conversion.
* sun/sun4.cpp: Switched to NCR 53C90 from 53C90A, and fixed DMA byte-address masking - fixes Solaris 2.4 booting.
