MDEC is now an internal device of the PlayStation CPU [smf]
PlayStation DMA uses delegates so devices can be hooked up.
device_t::siblingdevice() uses device list on mconfig() so it can work before the machine is constructed.
moved unused console code back to mess.
Converted PlayStation DMA to an internal device to the CPU core. DMA to external devices can be set in the machine config, the old calls are still there until the rest of the code is converted. [smf]
The following MAME core changes have been required to allow internal devices to be configurable by the main machine config & to work with internal memory maps.
device.machine_config_additions() are now processed as soon as the device is added, so sub devices can be configured straight away.
replacing or removing a device removes any devices owned by the device being removed, as now they are added straight away.
device_t::subdevice() uses the machine config device list instead of the machine to find the device as the machine is not created until after all the devices have been created.
devices in an internal address map are assumed to be owned by the CPU, while devices in a standard address maps are assumed to be siblings of the CPU.
A code review and regression test would be a good idea.
cases, we can get rid of the postload function entirely and just
call directly to the target function. Drivers eventually should
just override device_postload() instead of registering for callbacks.
- non-device timer callbacks
- machine state changing callbacks
- configuration callbacks
- per-screen VBLANK callbacks
- DRC backend callbacks
For the timer case only, I added wrappers for the old-style functions.
Over time, drivers should switch to device timers instead, reducing the
number of timers that are directly allocated through the scheduler.
existing modern devices and the legacy wrappers to work in this
environment. This in general greatly simplifies writing a modern
device. [Aaron Giles]
General notes:
* some more cleanup probably needs to happen behind this change,
but I needed to get it in before the next device modernization
or import from MESS :)
* new template function device_creator which automatically defines
the static function that creates the device; use this instead of
creating a static_alloc_device_config function
* added device_stop() method which is called at around the time
the previous device_t's destructor was called; if you auto_free
anything, do it here because the machine is gone when the
destructor is called
* changed the static_set_* calls to pass a device_t & instead of
a device_config *
* for many devices, the static config structure member names over-
lapped the device's names for devcb_* functions; in these cases
the members in the interface were renamed to have a _cb suffix
* changed the driver_enumerator to only cache 100 machine_configs
because caching them all took a ton of memory; fortunately this
implementation detail is completely hidden behind the
driver_enumerator interface
* got rid of the macros for creating derived classes; doing it
manually is now clean enough that it isn't worth hiding the
details in a macro
meant adding a machine() accessor but it's worth it for consistency.
This will allow future changes from reference to pointer to happen
transparently for devices. [Aaron Giles]
Simple S&R:
m_machine( *[^ (!=;])
machine()\1
loader rewrite, which is still in progress....)
Replaced mamedriv.c with a new driver list mechanism that is generated
by the build tools. The emulator core now expects the presence of a
file called src/$(TARGET)/$(SUBTARGET).lst which is just a raw list of
driver names, one per line. C and C++ comments are still permitted.
This file is parsed by a new build tool makelist which extracts the
driver names, sorts them, and generates a file called drivlist.c, which
is consumed by the core. [Aaron Giles]
Added new osdcore function osd_malloc_array() which is identical to
osd_malloc() but obviously hints that the underlying allocation is for
an array. Updated all callers to use the appropriate form. Modified the
Windows allocator to only use guard pages for array-style allocations,
allowing us to enable them once again in debug builds. [Aaron Giles]
Created new static class driver_list to wrap accesses to the list of
available drivers. Improved speed of driver lookups by relying on the
presorting done by makelist. [Aaron Giles]
Created helper class driver_enumerator as a helper for iterating through
the list of drivers. This class supports basic filtering and iteration,
and also serves as a temporary cache of machine_configs. [Aaron Giles]
Created cli_frontend object to wrap all the CLI handling code in
clifront.c. Updated/simplified all the code to take advantage of the
driver_enumerator. [Aaron Giles]
Created media_auditor object to wrap all the auditing functions in
audit.c. Updated all users to the new interface. Note that the new
auditing mechanism is slightly out of sync with the romload code in
terms of finding ROMs owned by devices, so it may mis-report some
issues until the new ROM loading code is in. [Aaron Giles]
Added concept of a per-device searchpath. For most devices, their
searchpath is just the short name of the device. For driver_devices, the
searchpath is driver[;parent[;bios]]. This searchpath will eventually be
used by the rom loader to find ROMs. For now it is used by the media
auditor only. [Aaron Giles]
Created info_xml_creator object to wrap all the info generation functions
in info.c. Converted the file to C++ and cleaned up the input processing
code. [Aaron Giles]
(not for whatsnew ... Known issues: auditing of CHDs appears busted, and
debug builds report unfreed memory if you use the built-in game picker)
Remove redundant machine items from address_space and device_t.
Neither machine nor m_machine are directly accessible anymore.
Instead a new getter machine() is available which returns a
machine reference. So:
space->machine->xxx ==> space->machine().xxx
device->machine->yyy ==> device->machine().yyy
Globally changed all running_machine pointers to running_machine
references. Any function/method that takes a running_machine takes
it as a required parameter (1 or 2 exceptions). Being consistent
here gets rid of a lot of odd &machine or *machine, but it does
mean a very large bulk change across the project.
Structs which have a running_machine * now have that variable
renamed to m_machine, and now have a shiny new machine() method
that works like the space and device methods above. Since most of
these are things that should eventually be devices anyway, consider
this a step in that direction.
98% of the update was done with regex searches. The changes are
architected such that the compiler will catch the remaining
errors:
// find things that use an embedded machine directly and replace
// with a machine() getter call
S: ->machine->
R: ->machine\(\)\.
// do the same if via a reference
S: \.machine->
R: \.machine\(\)\.
// convert function parameters to running_machine &
S: running_machine \*machine([^;])
R: running_machine \&machine\1
// replace machine-> with machine.
S: machine->
R: machine\.
// replace &machine() with machine()
S: \&([()->a-z0-9_]+machine\(\))
R: \1
// sanity check: look for this used as a cast
(running_machine &)
// and change to this:
*(running_machine *)
to private member variables with accessors:
machine->m_respool ==> machine->respool()
machine->config ==> machine->config()
machine->gamedrv ==> machine->system()
machine->m_regionlist ==> machine->first_region()
machine->sample_rate ==> machine->sample_rate()
Also converted internal lists to use simple_list.
functionality in favor of alternate mechanisms. Errors are
now reported via an astring rather than via callbacks. Every
option must now specify a type (command, integer, float, string,
boolean, etc). Command behavior has changed so that only one
command is permitted. [Aaron Giles]
Changed fileio system to accept just a raw searchpath instead of
an options/option name combination. [Aaron Giles]
Created emu_options class dervied from core_options which wraps
core emulator options. Added mechanisms to cleanly change the
system name and add/remove system-specific options, versus the
old way using callbacks. Also added read accessors for all the
options, to ensure consistency in how parameters are handled.
Changed most core systems to access emu_options instead of
core_options. Also changed machine->options() to return emu_options.
[Aaron Giles]
Created cli_options class derived from emu_options which adds the
command-line specific options. Updated clifront code to leverage
the new class and the new core behaviors. cli_execute() now accepts
a cli_options object when called. [Aaron Giles]
Updated both SDL and Windows to have their own options classes,
derived from cli_options, which add the OSD-specific options on
top of everything else. Added accessors for all the options so
that queries are strongly typed and simplified. [Aaron Giles]
Out of whatsnew: I've surely screwed up some stuff, though I have
smoke tested a bunch of things. Let me know if you hit anything odd.
Also I know this change will impact the WINUI stuff, please let me
know if there are issues. All the functionality necessary should
still be present. If it's not obvious, please talk to me before
adding stuff to the core_options class.
to pass a core_options object to the constructor, along with
a search path. This required pushing either a running_machine
or a core_options through some code that wasn't previously
ready to handle it. emu_files can be reused over multiple
open/close sessions, and a lot of core code cleaned up
nicely as things were converted to them.
Also created a file_enumerator class for iterating over files
in a searchpath. This replaces the old mame_openpath functions.
Changed machine->options() to return a reference.
Removed public nvram_open() and fixed jchan/kaneko16 to
stop directly saving NVRAM.
Removed most of the mame_options() calls; this will soon go
away entirely, so don't add any more.
Added core_options to device_validity_check() so they can be
used to validate things.
- Updated all devices containing ROM regions to have short names and all modern devices too
- Created new validation to check existence of short name if device contain ROM region defined
are still intact. The new state_manager class has templatized methods
for saving the various types, and through template specialization can
save more complex system types cleanly (like bitmaps and attotimes).
Added new mechanism to detect proper state save types. This is much
more strict and there will likely be some games/devices that fatalerror
at startup until they are remedied. Spot checking has caught the more
common situations.
The new state_manager is embedded directly in the running_machine,
allowing objects to register state saving in their constructors now.
Added NAME() macro which is a generalization of FUNC() and can be
used to wrap variables that are registered when directly using the
new methods as opposed to the previous macros. For example:
machine->state().save_item(NAME(global_item))
Added methods in the device_t class that implicitly register state
against the current device, making for a cleaner interface.
Just a couple of required regexes for now:
state_save_register_postload( *)\(( *)([^,;]+), *
\3->state().register_postload\1\(\2
state_save_register_presave( *)\(( *)([^,;]+), *
\3->state().register_presave\1\(\2
timers into the scheduler. Retain TIMER devices as a separate wrapper
in timer.c/.h. Inline wrappers are currently provided for all timer
operations; a future update will bulk clean these up.
Rather than using macros which hide generation of a string-ified name
for callback functions, the new methods require passing both a function
pointer plus a name string. A new macro FUNC() can be used to output
both, and another macro MFUNC() can be used to output a stub-wrapped
class member as a callback.
Also added a time() method on the machine, so that machine->time() gives
the current emulated time. A wrapper for timer_get_time is currently
provided but will be bulk replaced in the future.
For this update, convert all classic timer_alloc, timer_set,
timer_pulse, and timer_call_after_resynch calls into method calls on
the scheduler.
For new device timers, added methods to the device_t class that make
creating and managing these much simpler. Modern devices were updated
to use these.
Here are the regexes used; some manual cleanup (compiler-caught) will
be needed since regex doesn't handle nested parentheses cleanly
1. Convert timer_call_after_resynch calls
timer_call_after_resynch( *)\(( *)([^,;]+), *([^,;]+), *([^,;]+), *([^);]+)\)
\3->scheduler().synchronize\1\(\2FUNC(\6), \5, \4\)
2. Clean up trailing 0, NULL parameters
(synchronize[^;]+), 0, NULL\)
\1)
3. Clean up trailing NULL parameters
(synchronize[^;]+), NULL\)
\1)
4. Clean up completely empty parameter lists
synchronize\(FUNC\(NULL\)\)
synchronize()
5. Convert timer_set calls
timer_set( *)\(( *)([^,;]+), *([^,;]+), *([^,;]+), *([^,;]+), *([^);]+)\)
\3->scheduler().timer_set\1\(\2\4, FUNC(\7), \6, \5\)
6. Clean up trailing 0, NULL parameters
(timer_set[^;]+), 0, NULL\)
\1)
7. Clean up trailing NULL parameters
(timer_set[^;]+), NULL\)
\1)
8. Convert timer_set calls
timer_pulse( *)\(( *)([^,;]+), *([^,;]+), *([^,;]+), *([^,;]+), *([^);]+)\)
\3->scheduler().timer_pulse\1\(\2\4, FUNC(\7), \6, \5\)
9. Clean up trailing 0, NULL parameters
(timer_pulse[^;]+), 0, NULL\)
\1)
10. Clean up trailing NULL parameters
(timer_pulse[^;]+), NULL\)
\1)
11. Convert timer_alloc calls
timer_alloc( *)\(( *)([^,;]+), *([^,;]+), *([^);]+)\)
\3->scheduler().timer_alloc\1\(\2FUNC(\4), \5\)
12. Clean up trailing NULL parameters
(timer_alloc[^;]+), NULL\)
\1)
13. Clean up trailing 0 parameters
(timer_alloc[^;]+), 0\)
\1)
14. Fix oddities introduced
\&m_machine->scheduler()
m_machine.scheduler()
global functions which are now superceded by the operators and
methods on the class. [Aaron Giles]
Required mappings are:
attotime_make(a,b) => attotime(a,b)
attotime_to_double(t) => t.as_double()
double_to_attotime(d) => attotime::from_double(d)
attotime_to_attoseconds(t) => t.as_attoseconds()
attotime_to_ticks(t,f) => t.as_ticks(f)
ticks_to_attotime(t,f) => attotime::from_ticks(t,f)
attotime_add(a,b) => a + b
attotime_add_attoseconds(a,b) => a + attotime(0, b)
attotime_sub(a,b) => a - b
attotime_sub_attoseconds(a,b) => a - attotime(0, b)
attotime_compare(a,b) == 0 => a == b
attotime_compare(a,b) != 0 => a != b
attotime_compare(a,b) < 0 => a < b
attotime_compare(a,b) <= 0 => a <= b
attotime_compare(a,b) > 0 => a > b
attotime_compare(a,b) >= 0 => a >= b
attotime_mul(a,f) => a * f
attotime_div(a,f) => a / f
attotime_min(a,b) => min(a,b)
attotime_max(a,b) => max(a,b)
attotime_is_never(t) => t.is_never()
attotime_string(t,p) => t.as_string(p)
In addition, some existing #defines still exist but will go away:
attotime_zero => attotime::zero
attotime_never => attotime::never
ATTOTIME_IN_SEC(s) => attotime::from_seconds(s)
ATTOTIME_IN_MSEC(m) => attotime::from_msec(m)
ATTOTIME_IN_USEC(u) => attotime::from_usec(u)
ATTOTIME_IN_NSEC(n) => attotime::from_nsec(n)
ATTOTIME_IN_HZ(h) => attotime::from_hz(h)
cleaner way to differentiate between multiple timers rather than
relying on the pointers. These values are also saved with the
timers. Updated the few devices using device timers to leverage
this.
Added new function device_timer_call_after_resynch() which creates
a temporary 0-length timer that calls back through the device's
device_timer() method with a given device_timer_id.
Updated i8257_device to initialize its state and use device
timers.
(Fixes 04032: All sets in dkong.c: [debug] Game does not start.)
broadly used.
Added memory interface to the intelfsh device so you can access/view the
data in the debugger and via the standard memory interfaces. Removed the
old memory() method in favor of new functions read_raw()/write_raw() which
do direct reads/writes of the data.
Cleaned up CPS3 No-CD sets to break up the "ROMs" into individual flash
pieces which are automatically loaded by the intelfsh device on initialization.
Also split the MACHINE_CONFIG to only populate the number of SIMMs actually
present for each game, as documented in the top of the file. And replaced
the NVRAM_HANDLER with an NVRAM device.
definition of devices that are based off of a parent device, but which
differ in name and a single parameter.
Added a UINT32 param to the device_config constructor to facilitate
the use of the new macros.
debugger do it. This allows the device to start itself up before the
debugger tries to figure out what to do with it. Fixes the problem
where register names were not populated into the symbol table
correctly after I shuffled the initialization order.
class with a new driver_device class, which is the base class for all
driver_data objects now. The new driver devices are added as the
first device in the device list, with a tag of "root"; all other
devices are now owned by the driver device.
Moved core callbacks (machine_start/_reset, sound_start/_reset,
video_start/_reset/_eof/_update, and palette_init) into device
configuration parameters on these new devices. The driver_device
base class overrides device_start(), ensures all other devices have
been started, and then calls, in order, the following overridable
methods:
find_devices() - new, used to locate devices prior to DRIVER_INIT
DRIVER_INIT function from the game driver
palette_init() - by default calls the MDRV_PALETTE_INIT function
driver_start() - new
machine_start() - by default calls the MDRV_MACHINE_START function
sound_start() - by default calls the MDRV_SOUND_START function
video_start() - by default calls the MDRV_VIDEO_START function
Similarly, the driver_device class overrides device_reset() and then
calls these methods in order:
driver_reset() - new
machine_reset() - by default calls the MDRV_MACHINE_RESET function
sound_reset() - by default calls the MDRV_SOUND_RESET function
video_reset() - by default calls the MDRV_VIDEO_RESET function
To accommodate these changes, initialization order is slightly
altered from before. The tilemap, video, sound, and debug systems
are now initialized prior to the devices' start. And the user
callbacks for DRIVER_INIT, PALETTE_INIT, MACHINE_START, SOUND_START,
and VIDEO_START are all called back-to-back. The net effect should
be similar, however.
Added methods (optional_device and required_device) to the new
driver_device class to find devices, intended to be used from the
find_devices() callback. See harddriv.h and beathead.h for examples
of usage.
Changed device_t::subtag to only prepend a prefix if the device is
not the 'root' device, in order to keep compatibility with existing
tag searching.
Changed device startup to actively reorder devices when they report
missing dependencies. This ensures that the reset functions get
called in the same order that the start functions did.
Bulk updated drivers as follows:
First removed the old static alloc function from the driver_data_t:
S: [ \t]*static driver_device \*alloc *\( *running_machine *\&machine *\) *\{ *return auto_alloc_clear *\( *\&machine *, *[a-zA-Z0-9_]+_state *\( *machine *\) *\); *\}[\r\n]*
R:
Then switched from driver_data_t to driver_device:
S: driver_data_t
R: driver_device
Then changed the constructors to pass the correct parameters:
S: ([a-zA-Z0-9_]+)_state *\( *running_machine *\&machine *\)([\r\n\t ]+): *driver_device *\( *machine *\)
R: \1_state\(running_machine \&machine, const driver_device_config_base \&config\)\2: driver_device\(machine, config\)
type safety. If legacy devices still use inline data, those types are not checked.
However, new devices no longer have access to the generic m_inline_data. Instead
their MDRV_* macros should map to calls to static functions in the device config
class which downcast a generic device_config to the specific device config, and
then set the appropriate values. This is not to be done inline in order to prevent
further code bloat in the constructors. See eeprom/7474/i2cmem/okim6295 for examples.
#ifdef'ed several unused machine driver definitions that weren't referenced.
devices. Debugger now creates one for each device. C++-ified most
debugger operations to hang off the debugging class, and updated
most callers. This still needs a little cleanup, but it fixes most
issues introduced when the CPUs were moved to their own devices.
Got rid of cpu_count, cpu_first, cpu_next, etc. as they were badly
broken. Also removed cpu_is_executing, cpu_is_suspended,
cpu_get_local_time, and cpu_abort_timeslice.
Some minor name changes:
state_value() -> state()
state_set_value() -> set_state()
DECLARE_LEGACY_CPU_DEVICE and DEFINE_LEGACY_CPU_DEVICE. Changed CPUs
to be their own device types, rather than all of type CPU with a
special internal subtype. Note that as part of this process I removed
the CPU_ prefix from the ALL-CAPS device name, so CPU_Z80 is just
plain old Z80 now. This required changing a couple of names like
8080 to I8080 so that there was an alphabetic first character.
Added memory interfaces to the list of fast-access interfaces. To do
this properly I had to add a separate method to devices which is
called immediately after construction, when it is possible to perform
dynamic_casts on fully-constructed objects. (This is just internal,
no changes necessary to the devices themselves.)
Some additional notes:
* SH2 and SH4 had typedefs that conflicted with their CPU_-less names
so I bulk renamed to structures to sh2_state and sh4_state; RB, feel
free to choose alternate names if you don't like 'em
* SCSP was caught doing something to the 3rd indexed CPU. Since several
systems that use SCSP don't even have 3 CPUs, I had no idea what
this was supposed to do, so I changed to it reference "audiocpu"
assuming that stv was the assumed target. This is really gross and
should be a configuration parameter, not a hard-coded assumption.
running_machine definition and implementation.
Moved global machine-level operations and accessors into methods on the
running_machine class. For the most part, this doesn't affect drivers
except for a few occasional bits:
mame_get_phase() == machine->phase()
add_reset_callback() == machine->add_notifier(MACHINE_NOTIFY_RESET, ...)
add_exit_callback() == machine->add_notifier(MACHINE_NOTIFY_EXIT, ...)
mame_get_base_datetime() == machine->base_datetime()
mame_get_current_datetime() == machine->current_datetime()
Cleaned up the region_info class, removing most global region accessors
except for memory_region() and memory_region_length(). Again, this doesn't
generally affect drivers.
this object which can be called multiple times to append new devices
after the initial machine configuration is set up. Updated member
variables to match new naming convention.
Changed the running_machine to take a constructed machine_config
object in the constructor, instead of creating one itself, for
consistency. Also added machine->total_colors() as a shortcut to
machine->config->m_total_colors.
the device_config constructor. In situations where the proper name is not
known at construction time, a generic name can be specified and then
overridden later once the configuration is complete.
performance as a result of this change. Do not panic; report issues to the
list in the short term and I will look into them. There are probably also
some details I forgot to mention. Please ask questions if anything is not
clear.
NOTE: This is a major internal change to the way devices are handled in
MAME. There is a small impact on drivers, but the bulk of the changes are
to the devices themselves. Full documentation on the new device handling
is in progress at http://mamedev.org/devwiki/index.php/MAME_Device_Basics
Defined two new casting helpers: [Aaron Giles]
downcast<type>(value) should be used for safe and efficient downcasting
from a base class to a derived class. It wraps static_cast<> by adding
an assert that a matching dynamic_cast<> returns the same result in
debug builds.
crosscast<type>(value) should be used for safe casting from one type to
another in multiple inheritance scenarios. It compiles to a
dynamic_cast<> plus an assert on the result. Since it does not optimize
down to static_cast<>, you should prefer downcast<> over crosscast<>
when you can.
Redefined running_device to be a proper C++ class (now called device_t).
Same for device_config (still called device_config). All devices and
device_configs must now be derived from these base classes. This means
each device type now has a pair of its own unique classes that describe
the device. Drivers are encouraged to use the specific device types
instead of the generic running_device or device_t classes. Drivers that
have a state class defined in their header file are encouraged to use
initializers off the constructor to locate devices. [Aaron Giles]
Removed the following fields from the device and device configuration
classes as they never were necessary or provided any use: device class,
device family, source file, version, credits. [Aaron Giles]
Added templatized variant of machine->device() which performs a downcast
as part of the device fetch. Thus machine->device<timer_device>("timer")
will locate a device named "timer", downcast it to a timer_device, and
assert if the downcast fails. [Aaron Giles]
Removed most publically accessible members of running_device/device_t in
favor of inline accessor functions. The only remaining public member is
machine. Thus all references to device->type are now device->type(), etc.
[Aaron Giles]
Created a number of device interface classes which are designed to be mix-
ins for the device classes, providing specific extended functionality and
information. There are standard interface classes for sound, execution,
state, nvram, memory, and disassembly. Devices can opt into 0 or more of
these classes. [Aaron Giles]
Converted the classic CPU device to a standard device that uses the
execution, state, memory, and disassembly interfaces. Used this new class
(cpu_device) to implement the existing CPU device interface. In the future
it will be possible to convert each CPU core to its own device type, but
for now they are still all CPU devices with a cpu_type() that specifies
exactly which kind of CPU. [Aaron Giles]
Created a new header devlegcy.h which wraps the old device interface using
some special template classes. To use these with an existing device,
simply remove from the device header the DEVICE_GET_INFO() declaration and
the #define mapping the ALL_CAPS name to the DEVICE_GET_INFO. In their
place #include "devlegcy.h" and use the DECLARE_LEGACY_DEVICE() macro.
In addition, there is a DECLARE_LEGACY_SOUND_DEVICE() macro for wrapping
existing sound devices into new-style devices, and a
DECLARE_LEGACY_NVRAM_DEVICE() for wrapping NVRAM devices. Also moved the
token and inline_config members to the legacy device class, as these are
not used in modern devices. [Aaron Giles]
Converted the standard base devices (VIDEO_SCREEN, SPEAKER, and TIMER)
from legacy devices to the new C++ style. Also renamed VIDEO_SCREEN to
simply SCREEN. The various global functions that were previously used to
access information or modify the state of these devices are now replaced
by methods on the device classes. Specifically:
video_screen_configure() == screen->configure()
video_screen_set_visarea() == screen->set_visible_area()
video_screen_update_partial() == screen->update_partial()
video_screen_update_now() == screen->update_now()
video_screen_get_vpos() == screen->vpos()
video_screen_get_hpos() == screen->hpos()
video_screen_get_vblank() == screen->vblank()
video_screen_get_hblank() == screen->hblank()
video_screen_get_width() == screen->width()
video_screen_get_height() == screen->height()
video_screen_get_visible_area() == screen->visible_area()
video_screen_get_time_until_pos() == screen->time_until_pos()
video_screen_get_time_until_vblank_start() ==
screen->time_until_vblank_start()
video_screen_get_time_until_vblank_end() ==
screen->time_until_vblank_end()
video_screen_get_time_until_update() == screen->time_until_update()
video_screen_get_scan_period() == screen->scan_period()
video_screen_get_frame_period() == screen->frame_period()
video_screen_get_frame_number() == screen->frame_number()
timer_device_adjust_oneshot() == timer->adjust()
timer_device_adjust_periodic() == timer->adjust()
timer_device_reset() == timer->reset()
timer_device_enable() == timer->enable()
timer_device_enabled() == timer->enabled()
timer_device_get_param() == timer->param()
timer_device_set_param() == timer->set_param()
timer_device_get_ptr() == timer->get_ptr()
timer_device_set_ptr() == timer->set_ptr()
timer_device_timeelapsed() == timer->time_elapsed()
timer_device_timeleft() == timer->time_left()
timer_device_starttime() == timer->start_time()
timer_device_firetime() == timer->fire_time()
Updated all drivers that use the above functions to fetch the specific
device type (timer_device or screen_device) and call the appropriate
method. [Aaron Giles]
Changed machine->primary_screen and the 'screen' parameter to VIDEO_UPDATE
to specifically pass in a screen_device object. [Aaron Giles]
Defined a new custom interface for the Z80 daisy chain. This interface
behaves like the standard interfaces, and can be added to any device that
implements the Z80 daisy chain behavior. Converted all existing Z80 daisy
chain devices to new-style devices that inherit this interface.
[Aaron Giles]
Changed the way CPU state tables are built up. Previously, these were data
structures defined by a CPU core which described all the registers and how
to output them. This functionality is now part of the state interface and
is implemented via the device_state_entry class. Updated all CPU cores
which were using the old data structure to use the new form. The syntax is
currently awkward, but will be cleaner for CPUs that are native new
devices. [Aaron Giles]
Converted the okim6295 and eeprom devices to the new model. These were
necessary because they both require multiple interfaces to operate and it
didn't make sense to create legacy device templates for these single cases.
(okim6295 needs the sound interface and the memory interface, while eeprom
requires both the nvram and memory interfaces). [Aaron Giles]
Changed parameters in a few callback functions from pointers to references
in situations where they are guaranteed to never be NULL. [Aaron Giles]
Removed MDRV_CPU_FLAGS() which was only used for disabling a CPU. Changed
it to MDRV_DEVICE_DISABLE() instead. Updated drivers. [Aaron Giles]
Reorganized the token parsing for machine configurations. The core parsing
code knows how to create/replace/remove devices, but all device token
parsing is now handled in the device_config class, which in turn will make
use of any interface classes or device-specific token handling for custom
token processing. [Aaron Giles]
Moved many validity checks out of validity.c and into the device interface
classes. For example, address space validation is now part of the memory
interface class. [Aaron Giles]
Consolidated address space parameters (bus width, endianness, etc.) into
a single address_space_config class. Updated all code that queried for
address space parameters to use the new mechanism. [Aaron Giles]
functions into methods of those classes. The most wide-ranging
change was converting device_reset() to device->reset(). Apart
from that it was mostly internal shuffling in the core.
