This effectively reverts b380514764 and
c24473ddff, restoring the state at
598cd52272.
Before pushing, please check that what you're about to push is sane.
Check your local commit log and ensure there isn't anything out-of-place
before pushing to mainline. When things like this happen, it wastes
everyone's time. I really don't need this in a week when real work™ is
busting my balls and I'm behind where I want to be with preparing for
MAME release.
- 80 column card with SDX in CP/M mode.
- ROM/RAM banking fixed for CP/M, and MTX500 now correctly detected.
- Support for Type 03 and Type 07 .mfloppy images.
- Added alternate MTX2 romset (German).
- Keyboard ROM now selected in Configuration.
- Quickload .RUN files.
New WORKING machines
---
Ms. Pac-Man 5-in-1 (Ms. Pac-Man, Pole Position, Galaga, Xevious, Mappy) (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, Peter Wilhelmsen, 19 external donators]
Disney Princess (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
New WORKING Software List entries
---
jakks_gamekey_nm:nrxdig New Rally X & Dig Dug [Sean Riddle, Peter Wilhelmsen, 19 external donators]
note, Pole Position is not really very playable at the moment due to raster rendering glitches, the rest are, aside from some obvious sound issues (nw)
New machines marked as NOT WORKING
---
Wheel of Fortune (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
There is a video rendering glitch (lkely another off by x lines raster issue) causing the letter selection text to not render properly, it appears the letters scroll instead of the text scroller below, which doesn't. (nw)
-spg2xx: Make rowscroll offset configurable, can't find register to control it, but JAKKS games need 0, while the chinese stuff needs 15 (nw)
-jak_wof: Marked as working, analog wheel isn't emulated, but is optional (I don't see where / how it maps) (nw)
-jak_wof: Improved inputs (nw)
-gamekeys now save to the gamekey seeprom not the system one (nw)
- Added Slogger Plus 2 Expansion, Acorn Tube Interface and P.R.E.S. Advanced Plus 5 cartridge devices.
- Use derived 16Mhz clock on expansion bus and cartridge slots.
- Removed MCFG and added devcb3 in expansion and cartridge devices.
-vsmileb: Found enough port bits to show the VTech logo and V.Smile Baby intro. No game boots yet. [Ryan Holtz]
-spg2xx: Added separate logging for external interrupts and address mapping. [Ryan Holtz]
- 32K ROM slots in B+ and Master series.
- PALPROM carrier boards from Computer Concepts, Watford Electronics, etc.
- Real Time Clock ROM devices from Solidisk and PMS.
- UserRAM sideways RAM from Acorn User.
- MRM E00 DFS.
- Add custom keyboard port and emulate most of the Expanded Typewriter Keyboard
- Add unidirectional printer port
- Use addressable latch devices to control various things, including disabling display during RAM test
- Hack to pass non-volatile memory test on uts10
* XaviX work
new Software List items [Sean Riddle, David Haywood]
ekara_japan_d:dc0002 BAT Volume 6 (Japan) (DC0002-BAT)
ekara_japan_d:dc0005 TV Pop Volume 9 (Japan) (DC0005-TPJ)
ekara_japan_p:pc0001 BHT Volume 4 (Japan) (PC0001-BHT)
ekara_japan_p:pc0003 ENB Volume 1 (Japan) (PC0003-ENB)
ekara_japan_g:gc0001 BAT Volume 1 (Japan) (GC0001-BAT)
ekara_japan_g:gc0016 TV Pop Volume 5 (Japan) (GC0016-TPJ)
ekara_japan_web:ekaraweb12 e-kara Web cartridge 12M (blank) (Japan)
new clones
e-kara (US?, NTSC, set 2) [Sean Riddle]
enable support for 'p' type cartridges for use with ddrfammt [David Haywood]
various documentation improvements [Sean Riddle, David Haywood]
(there are also 3 bad dumps, currently commented out, will replace later)
* improved filenames (nw)
* for later (nw)
* checkpoint (nw)
* seeprom stuff (nw)
* (nw)
* correctly saves, does not correctly reload, also promote popira and ddrfammt to working
* new Software List entries [Sean Riddle, David Haywood]
ekara_japan:ec0001 J-Pop Mix Volume 1 (Japan) (EC0001-JPM)
ekara_japan:ec0032 ANM Volume 2 (Japan) (EC0032-ANM)
ekara_japan:ec0037 ENK Volume 4 (Japan) (EC0037-ENK)
ekara_japan:ec0046 J-Pop Mix Volume 20 (Japan) (EC0046-JPM)
ekara_japan:ec0005 J-Pop Mix Volume 5 (Japan) (EC0005-JPM)
ekara_japan:ec0007 1976-78 Volume 1 (Japan) (EC0007-G76)
ekara_japan:ec0079 ETZ (Japan) (EC0079-ETZ)
ekara_japan:ec0082 Matthew's Best Hit Selection (Japan) (EC0082-MBH)
ekara_japan:ec0009 ANM Volume 1 (Japan) (EC0009-ANM)
ekara_japan_en:en3 EN-3 (Japan)
ekara_japan_m:mc0013 KSM Mini Volume 5 (Japan) (MC0005-KSM)
ekara_japan_s:sc0012 SAI (series 3) Volume 3 (Japan) (SC0012-SAI)
ekara_japan_s:sc0004 SAI (series 1) Volume 1 (Japan) (SC0004-SAI)
ekara_japan_g:gc0002 BHT Volume 1 (Japan) (GC0002-BHT)
ekara_japan_g:gc0003 BAT Volume 2 (Japan) (GC0003-BAT)
ekara_japan_g:gc0004 BHT Volume 2 (Japan) (GC0004-BHT)
ekara_japan_p:pc0004 BHT Volume 7 (Japan) (PC0004-BHT)
* (nw)
* notes (nw)
* (nw)
* this register seems to be r/w (nw)
* fix crash in popira when pausing (requires register readback)
* save state stuff (nw)
* give excite fishing some inputs while I'm making misc minor changes (nw)
* also promote the Nostalgia games, and Card Night, as they have simple digital inputs and seem to work
* (nw)
* copy+paste modernization
* 2 more dumps (nw)
* doesn't seem to have an seeprom (nw)
* preliminary taikodp controls (nw)
* P4 uses SEEPROM (nw)
* rejig some bases (nw)
Used in the high end HP9000/300 machines. Provides a resolution
of 1280x1024 @ 8bpp. It also provides two overlay planes and one
phantom plane. Each plane contains two window movers that are used
for copying characters and tiles on the screen. It also has a RUG
for line/vector drawing. The current state implements everything
that is required to have a working HP Visual user environment in
MAME.
Working:
- window mover
- pixel replacement rules
- window replacement rules
- f0 tripple replacement rule (copy src or keep destination depending on pattern register)
- VRAM bit access mode
- solid line drawing
Not implemented yet:
- drawing circles
- linetype vector/circles
- rectangles
- filling areas
- tripple replacement rules other than f0
-nscsi_cd.cpp: Added various new-SCSI CD-ROM devices which support 512-byte blocks by default. [Ryan Holtz]
-sgikbd.cpp: Added a rudimentary HLE SGI Indigo keyboard device. Still needs keys to be mapped. [Ryan Holtz]
-indigo.cpp: Various changes: [Ryan Holtz]
* Expanded logging.
* Enabled PIT8254 timer. Has the wrong clock value; the correct clock causes a hang.
* Improved RAM layout.
* Added stubs for DSP RAM and Entry-level graphics.
On HP9000/300, these modules where always a logical unit connected to
the DIO bus. On some systems this was even a seperate DIO module. Lets
represent this in software. It also cleans up hp9k_3xx.cpp.
* Separate Microsoft 2-button mouse and Logitech 3-button Microsoft-compatible mouse
* Add Microsoft wheel mouse
* Make Mouse Systems mouse behave more realistically
* Add Mouse Systems "rotatable" mouse
* Simplify code and eliminate timers
(nw) X/Y translation and buttons works for all devices. The wheel on
the wheel mouse seems to be transmitting the right data, and CuteMouse
detects the wheel as being present, but no software seems to support it
properly. Software supporting the Mouse Systems "rotatable" mouse is
very rare - typically people just set the DIP switches on their M-1 for
"non-rotatable" mode. A standard mouse driver will see the "rotatable"
mouse moving two mickeys for each count, and move eratically on
rotation. The "rotable" mouse is poorly tested due to lack of software.
(nw) MAME doesn't have a proper input type for a mouse wheel, and it
doesn't seem to be possible to map the host mouse wheel to an axis when
configuring inputs. The default mapping ends up assigining the wheel or
rotation to one of the translation axes, which is very unhelpful.
Also add notes to Sun keyboard emulation.
There's a hack to make the 1200 Baud mouse actually run at 9600 Baud.
This is necessary because the SCC is incorrectly expecting 9600 Baud
rather than 1200 Baud. I don't have time to fix the SCC, so I'd
appreciate it if someone else would.
There's no way it should be expecting 9600 Baud on the mouse port.
Solaris 2.3 and later support 1200 Baud and 4800 Baud, and earlier
versions support 1200 Baud only. No version of Solaris works with a
9600 Baud mouse.
The workaround allows the mouse to be used in SunView on sun4_60 - I
haven't tested any other drivers.
* Implement Mitsumi Amiga 500, 600, and 2000/3000/4000/CDTV keyboards
* Add unlabeled keys to UK layout
* Restrict available keyboards depending on system type
* Note that C-A-A reset is now broken on "big box" Amigas as MAME doesn't implement it properly, and the hack providing a fake dedicated reset line has been removed
6502 MCU: fix execute loop
6500/1: implement as device with onboard peripherals
Fix some bogus comments
(nw) New keyboard only has U.S./Canada and UK variants for now. This keyboard doesn't
drive a dedicated reset line, instead using some sequence on the clock line detected by
the host chipset. MAME doesn't support this, so keyboard reset won't work. Also started
documenting the character labels on the keypad NumLock/ScrLock keys for language variants
but still need more pictures.
* hp9k_3xx: fix timer connection for /320 models
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp9k_3xx: add HP9122C floppy
Remove HP9895 from the default configuration. 3.5" where
standard on /300 and there's almost no software on it available.
If a user really needs 8" floppy drives on /300, he can do that via
commandline.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add Intel i8291a GPIB Talker/Listener
Required for the HP 9122C floppy, and used in many other devices.
Basic functionality was implemented to make the HP 9122C work, a few
things are still missing and will be added later. Most of the missing
things where simply not used in the HP9122C so i cannot test them.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Add HP 9122C floppy drive
These drives where common on HP9000/300 workstations. With the current
implementation TD0's from hpmuseum can be used to boot, and initializing,
reading and writing discs in HP basic works. Tested both high and double
density media. Supported Media formats are TD0 and MFI.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Remove vram_rw and ctrl_rw wrapper functions
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: replace hardcoded display width by m_fb_width
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: prepare topcat for multi plane operation
framebuffer vram is only 1 bit wide.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* 98544: set single topcat plane
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add nereid mapper used on HP98543/98545 graphic cards
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* prepare for multi-topcat operation
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add HP 98543 4 plane graphics card
* hp9k_3xx: add hp98543 card
* topcat,nerid: disable VERBOSE
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp98543: use required_device_array
* 98543: use required_region_ptr
* 98544: use required_region_ptr
* topcat: add save state support
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: add save state support
* hp98544,hp98543,topcat: use shared memory space
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: remove redundant variable
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat, nereid: remove trailing underscore from include guard
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat,hp98543: code style fixes proposed in PR
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* softfloat3: do we like this better? (nw)
* softfloat3: it gets the hose again (nw)
* softfloat3: sonofa (nw)
* interpro: wip checkpoint (nw)
* added 6x00 models
* added EDGE graphics skeleton
* split bus/cards into two types
* various fixes/changes
* interpro: slotify mouse (nw)
Needed to make the mouse a slot device to enable it to be connected to graphics boards under development.
* add validity check (nw)
The 98603A and 98603B cards have different base addresses and sizes
for the rom region. Split up the cards so that we can boot HP BASIC 4
and HP BASIC 5.1.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* remote488: work started
* remote488: fixed a crash when using socketed bitbangers on Linux machines
* remote488: added ieee-488 remotizer device
* remote488: added remotizer devices to ieee-488 buses of HP9845 & HP85
* remote488: added missing emu.h inclusion
* Revert "remote488: fixed a crash when using socketed bitbangers on Linux machines"
This reverts commit edfeb1768ec332ccdb77584e272d93b756819c41.
* remote488: nudge..
* remote488: no longer use locale-dependent functions, added commas and
semicolons as msg separators, improved use of util::string_format
