---------- Forwarded message ----------
From: abcd efgh <cix_999@yahoo.it>
Date: Mon, Aug 9, 2010 at 7:51 PM
Subject: genesisb.c
To: submit@mamedev.org
Hi everybody !
I made just a little work, i moved ssf2md in to aladinb.c driver and
renamed this one genesisb.c for create a new driver for all the
Genesis\Megadrive bootleg.
Bye Sonikos.
--------------------------------------------
The Last Starfighter (prototype) [Phil Bennett, Ken Van Mersbergen]
Air Race (prototype) [Phil Bennett, Ken Van Mersbergen]
--
From: Atari Ace <atari_ace@frontier.com>
Date: Tue, Aug 3, 2010 at 3:03 PM
Subject: [patch] Convert seta/seta2/ssv to driver_data
To: submit@mamedev.org
Cc: atariace@hotmail.com
Hi mamedev,
This patch removes all global variables from seta.c, seta2.c and
ssv.c. The number of AM_BASE() macros drops by 4% from 3111 to 2989.
Note: ssv.h and seta2.h are new files.
~aa
up the definition, rather than the whole tokenizing system, which lost type
checking. Added a new module addrmap.c which implements the address map
classes, and changed the macros to call methods on the address_map and
address_map_entry classes which are strongly typed.
Fixed a few incorrectly specified memory map entries along the way. Please
double-check to make sure the behavior is expected in: twincobr.c, lordgun.c,
galaxold.c.
This change also means that since the address_maps are now constructor
functions, they are detected when not used, so a number of #ifdef UNUSED_CODE
were added around dangling address map definitions.
Also included with this change:
- removed cputag_clocks_to_attotime() and cputag_attotime_to_clocks() in
favor of just expanding the class
- same for cputag_suspend() and cputag_resume()
* Initial release.
* Preliminary memory map.
* Hooked both PIAs, but need more analysis to confirm the offsets.
* Accurate graphics and color decode.
* Added main PCB and daughterboard layouts.
* Added partial docs and diagrams about the CPU/MCU/ROMs addressing.
* Added debug and technical notes.
New games marked as GAME_NOT_WORKING
------------------------------------
Mega Double Poker (conversion kit) [Roberto Fresca, ChrisQC, Smitdogg]
* Corrected the way the steering wheel is hooked up, fixing the jittery
steering in the sets with MCUs.
* Added a new layout file for the bootleg sets without MCUs (topracern and polepos2bi).
* Converted clock frequencies to crystal values from xtal.c.
* Added correct ROM names for the Namco-manufactured sets (polepos and polepos2).
* Completely removed the unused global variable polepos_gear_bit.
* Fixed a couple of bootleg ROMs that were very likely bit-rotted.
running_machine definition and implementation.
Moved global machine-level operations and accessors into methods on the
running_machine class. For the most part, this doesn't affect drivers
except for a few occasional bits:
mame_get_phase() == machine->phase()
add_reset_callback() == machine->add_notifier(MACHINE_NOTIFY_RESET, ...)
add_exit_callback() == machine->add_notifier(MACHINE_NOTIFY_EXIT, ...)
mame_get_base_datetime() == machine->base_datetime()
mame_get_current_datetime() == machine->current_datetime()
Cleaned up the region_info class, removing most global region accessors
except for memory_region() and memory_region_length(). Again, this doesn't
generally affect drivers.
like them, but it's a start. Split implementation of individual view
types out to separate files. Updated all callers.
Also:
* fixed okim6295 memory view
* changed emualloc to free resource pools from earliest to latest
so that early objects can safely clean up stuff they allocated
- moved image legacy device implementation to devimage.c
- created image.c implementation with initialization of devices/configuration for image devices, used those calls from mame.c
- some minor cleanup of legacy device and initial implementation of some calls
(no whatsnew for now, this is just for log,will put more info on final commit)
- Created legacy image device
- Moved opresolv implementation from MESS
- listmedia is option is available in MAME too
- listxml output now contains image devices
performance as a result of this change. Do not panic; report issues to the
list in the short term and I will look into them. There are probably also
some details I forgot to mention. Please ask questions if anything is not
clear.
NOTE: This is a major internal change to the way devices are handled in
MAME. There is a small impact on drivers, but the bulk of the changes are
to the devices themselves. Full documentation on the new device handling
is in progress at http://mamedev.org/devwiki/index.php/MAME_Device_Basics
Defined two new casting helpers: [Aaron Giles]
downcast<type>(value) should be used for safe and efficient downcasting
from a base class to a derived class. It wraps static_cast<> by adding
an assert that a matching dynamic_cast<> returns the same result in
debug builds.
crosscast<type>(value) should be used for safe casting from one type to
another in multiple inheritance scenarios. It compiles to a
dynamic_cast<> plus an assert on the result. Since it does not optimize
down to static_cast<>, you should prefer downcast<> over crosscast<>
when you can.
Redefined running_device to be a proper C++ class (now called device_t).
Same for device_config (still called device_config). All devices and
device_configs must now be derived from these base classes. This means
each device type now has a pair of its own unique classes that describe
the device. Drivers are encouraged to use the specific device types
instead of the generic running_device or device_t classes. Drivers that
have a state class defined in their header file are encouraged to use
initializers off the constructor to locate devices. [Aaron Giles]
Removed the following fields from the device and device configuration
classes as they never were necessary or provided any use: device class,
device family, source file, version, credits. [Aaron Giles]
Added templatized variant of machine->device() which performs a downcast
as part of the device fetch. Thus machine->device<timer_device>("timer")
will locate a device named "timer", downcast it to a timer_device, and
assert if the downcast fails. [Aaron Giles]
Removed most publically accessible members of running_device/device_t in
favor of inline accessor functions. The only remaining public member is
machine. Thus all references to device->type are now device->type(), etc.
[Aaron Giles]
Created a number of device interface classes which are designed to be mix-
ins for the device classes, providing specific extended functionality and
information. There are standard interface classes for sound, execution,
state, nvram, memory, and disassembly. Devices can opt into 0 or more of
these classes. [Aaron Giles]
Converted the classic CPU device to a standard device that uses the
execution, state, memory, and disassembly interfaces. Used this new class
(cpu_device) to implement the existing CPU device interface. In the future
it will be possible to convert each CPU core to its own device type, but
for now they are still all CPU devices with a cpu_type() that specifies
exactly which kind of CPU. [Aaron Giles]
Created a new header devlegcy.h which wraps the old device interface using
some special template classes. To use these with an existing device,
simply remove from the device header the DEVICE_GET_INFO() declaration and
the #define mapping the ALL_CAPS name to the DEVICE_GET_INFO. In their
place #include "devlegcy.h" and use the DECLARE_LEGACY_DEVICE() macro.
In addition, there is a DECLARE_LEGACY_SOUND_DEVICE() macro for wrapping
existing sound devices into new-style devices, and a
DECLARE_LEGACY_NVRAM_DEVICE() for wrapping NVRAM devices. Also moved the
token and inline_config members to the legacy device class, as these are
not used in modern devices. [Aaron Giles]
Converted the standard base devices (VIDEO_SCREEN, SPEAKER, and TIMER)
from legacy devices to the new C++ style. Also renamed VIDEO_SCREEN to
simply SCREEN. The various global functions that were previously used to
access information or modify the state of these devices are now replaced
by methods on the device classes. Specifically:
video_screen_configure() == screen->configure()
video_screen_set_visarea() == screen->set_visible_area()
video_screen_update_partial() == screen->update_partial()
video_screen_update_now() == screen->update_now()
video_screen_get_vpos() == screen->vpos()
video_screen_get_hpos() == screen->hpos()
video_screen_get_vblank() == screen->vblank()
video_screen_get_hblank() == screen->hblank()
video_screen_get_width() == screen->width()
video_screen_get_height() == screen->height()
video_screen_get_visible_area() == screen->visible_area()
video_screen_get_time_until_pos() == screen->time_until_pos()
video_screen_get_time_until_vblank_start() ==
screen->time_until_vblank_start()
video_screen_get_time_until_vblank_end() ==
screen->time_until_vblank_end()
video_screen_get_time_until_update() == screen->time_until_update()
video_screen_get_scan_period() == screen->scan_period()
video_screen_get_frame_period() == screen->frame_period()
video_screen_get_frame_number() == screen->frame_number()
timer_device_adjust_oneshot() == timer->adjust()
timer_device_adjust_periodic() == timer->adjust()
timer_device_reset() == timer->reset()
timer_device_enable() == timer->enable()
timer_device_enabled() == timer->enabled()
timer_device_get_param() == timer->param()
timer_device_set_param() == timer->set_param()
timer_device_get_ptr() == timer->get_ptr()
timer_device_set_ptr() == timer->set_ptr()
timer_device_timeelapsed() == timer->time_elapsed()
timer_device_timeleft() == timer->time_left()
timer_device_starttime() == timer->start_time()
timer_device_firetime() == timer->fire_time()
Updated all drivers that use the above functions to fetch the specific
device type (timer_device or screen_device) and call the appropriate
method. [Aaron Giles]
Changed machine->primary_screen and the 'screen' parameter to VIDEO_UPDATE
to specifically pass in a screen_device object. [Aaron Giles]
Defined a new custom interface for the Z80 daisy chain. This interface
behaves like the standard interfaces, and can be added to any device that
implements the Z80 daisy chain behavior. Converted all existing Z80 daisy
chain devices to new-style devices that inherit this interface.
[Aaron Giles]
Changed the way CPU state tables are built up. Previously, these were data
structures defined by a CPU core which described all the registers and how
to output them. This functionality is now part of the state interface and
is implemented via the device_state_entry class. Updated all CPU cores
which were using the old data structure to use the new form. The syntax is
currently awkward, but will be cleaner for CPUs that are native new
devices. [Aaron Giles]
Converted the okim6295 and eeprom devices to the new model. These were
necessary because they both require multiple interfaces to operate and it
didn't make sense to create legacy device templates for these single cases.
(okim6295 needs the sound interface and the memory interface, while eeprom
requires both the nvram and memory interfaces). [Aaron Giles]
Changed parameters in a few callback functions from pointers to references
in situations where they are guaranteed to never be NULL. [Aaron Giles]
Removed MDRV_CPU_FLAGS() which was only used for disabling a CPU. Changed
it to MDRV_DEVICE_DISABLE() instead. Updated drivers. [Aaron Giles]
Reorganized the token parsing for machine configurations. The core parsing
code knows how to create/replace/remove devices, but all device token
parsing is now handled in the device_config class, which in turn will make
use of any interface classes or device-specific token handling for custom
token processing. [Aaron Giles]
Moved many validity checks out of validity.c and into the device interface
classes. For example, address space validation is now part of the memory
interface class. [Aaron Giles]
Consolidated address space parameters (bus width, endianness, etc.) into
a single address_space_config class. Updated all code that queried for
address space parameters to use the new mechanism. [Aaron Giles]
* Improved the input system, added missing buttons.
* Figured out the full coinage DIP switches. (Coins A, B, C, Key In)
* Found and documented the output ports.
* Added full lamps support.
* Created a new button-lamps layout.
* Hooked the coin and key in counters.
* Added technical notes.
- added VGA emulation from MESS
- added INS8250 emulation from MESS
- added format decimal support to Microtouch
- added rom banking and inputs to pcat_nit games
- streetg(2) now boot properly
Modified the naomi clipping a bit to avoid so many black lines at the bottom [David Haywood]
new clones
----------
Road Riot's Revenge (prototype, set 3) [Siftware]
Indoor Soccer (set 2) [Siftware]
new not working
---------------
Super Famicom Box BIOS [Angelo Salese]
New Super 3D Golf Simulation - Waialae No Kiseki / Super Mahjong 2 (Super Famicom Box) [Angelo Salese]
snes.c: moved some more elements to driver_data class and added skeleton support for the BS-X satellaview addon (which will be used by MESS, eventually). No whatsnew.
New games added or promoted from NOT_WORKING status
---------------------------------------------------
GeGeGe no Kitarou Youkai Slot [A. Hoekman, ranger_lennier, Smitdogg, The Dumping Union, Luca Elia]
New games marked as GAME_NOT_WORKING
------------------------------------
Win Win Bingo (2 sets) [f205v, Filippo Tarderia]
Zoo [Brian Troha, The Dumping Union]
* Added lamps support to lucky8, lucky8a, lucky8b,
ns8liner, ns8linew and kkojnoli.
* Created lamps layout for the above sets.
* New inputs for ns8linew. This set has a second set of inputs,
and can be switched between them. No lamps activity or Big/Small
buttons are present while this alternative controls are used.
Maybe is a leftover.
* Some DIP switches were figured out. Coinage and limits are still
a real mystery since all DIP switches are reflected in the test mode.
* Remapped inputs to be straightforward with the control panel.
* Added the type (W-4/F-5) to the sets description.
* General inputs clean-up.
New games added or promoted from NOT_WORKING status
---------------------------------------------------
New Lucky 8 Lines / New Super 8 Lines (F-5, Witch Bonus)
[Roberto Fresca, incog, Smitdogg, The Dumping Union]
* Fixed inverted functions and buggy inputs.
* Added lamps support.
* Created button-lamps layout.
* Remapped inputs to reflect the controls layout. This way is more
user-friendly since controls are straight with button-lamps.
* Added coin/keyin/keyout/payout counters.
* Removed the pulse limitation in the BET input. This allow it to work
as BET and STOP2 properly.
* Added technical notes.
* Created complete inputs from the scratch.
* Added coin/keyin/keyout counters.
* Added main game and double-up rates DIP switches.
* Added minimum bet DIP switches.
* Added maximum bet DIP switches.
* Added complete coinage and remote credits DIP switches.
* Added jokers and demo sounds DIP switches.
* Figured out and documented all the game outputs.
* Created proper button-lamps layout.
Now the game is in full-working state.
Hooked up default NVRAM for Golly Ghost / Bubble Trouble [David Haywood]
clones
---
Moon Base (set 2) [jmurjr, D. Maeby, Charles MacDonald, The Dumping Union]
Vapor Trail - Hyper Offence Formation (World revision 3?) [f205v, Tirino73]
Cherry Bonus III (alt, set 2) [Anonymous]
new NOT WORKING games
---------------------
Lucky Boy / Poker 72 [David Haywood]
vmetal: added driver data class and save states [Fabio Priuli]
no save states in metro.c (yet) because some games like 3kokushi have serious glitches when loading a state. any help is welcome...
* Reworked button-lamps layouts per game. Cleaned-up the code.
* Added specific button-lamps layout for bigdeal games.
* Added specific button-lamps layout for royalcrd & jolycdit,
but there is a bug in the d-up select code that lights the
wrong lamp. This is a leftover from jollycrd routines.
* Flagged vegasfte as GAME_NOT_WORKING, since is not receiving
any coins or remote credits anymore.
