borti4938
5249d313d8
scanlines generation via multiplication
2018-02-22 08:11:26 +01:00
marqs
bee64c6fbc
allow profile link (to each logical input) via a menu option
2017-12-11 00:51:50 +02:00
marqs
09c735bd5f
Merge branch 'save_last_profile_per_input' of git://github.com/megari/ossc into megari-save_last_profile_per_input
2017-12-07 23:29:36 +02:00
marqs
dd4ffde231
update to Quartus 17.1
2017-12-07 21:35:08 +02:00
Ari Sundholm
04c9137e29
Move default input field from profiles to initconfig
...
This makes things consistent. Without this change, the default
input would be dictated by the profile associated with AV1.
2017-11-11 00:45:49 +02:00
Ari Sundholm
d638b6a650
Shrink write_userdata() by 20 bytes
2017-11-11 00:25:33 +02:00
Ari Sundholm
571b588da7
Shrink the code by 16 bytes by using an array to map values
2017-11-11 00:25:33 +02:00
Ari Sundholm
ab61fd0c67
Don't save initconfig every time the physical input and profile change
...
This spares the Flash from some unnecessary writes. If the profile
tied to a physical input changes, this change will be reflected in the
initconfig when the new profile is loaded.
2017-11-11 00:25:33 +02:00
Ari Sundholm
1979bdb333
Save the last profile used for each physical input
2017-11-02 23:38:43 +02:00
marqs
3b8b200d6f
Merge branch 'patch-10' of git://github.com/511141/ossc into 511141-patch-10
2017-10-28 12:11:34 +03:00
marqs
a24d6b0e3a
Update latency tester
...
* Enable operation with all sources
* Measure strobe length on low-persistence displays
2017-10-28 12:10:54 +03:00
marqs
4ae3423acb
Update Makefile and README
2017-10-26 00:56:07 +03:00
511141
2925ca389b
Update menu.c
2017-10-24 03:47:44 +11:00
marqs
1bf279b2a7
Initial latency tester implementation
2017-10-22 22:45:29 +03:00
marqs
4b21a354b4
Fix and optimize reverse lpf activation
2017-10-12 02:31:19 +03:00
marqs
0ab713a870
Merge branch 'lpf' of git://github.com/paulb-nl/ossc into paulb-nl-lpf
2017-10-11 07:36:00 +03:00
marqs
f5f95fe8c3
Merge branch 'patch-9' of git://github.com/511141/ossc into 511141-patch-9
2017-10-11 07:34:25 +03:00
marqs
a0c0620022
Use native 2x sampling only if h_total is below 1400
2017-10-11 07:33:52 +03:00
511141
2ff14280e5
Update
...
Noticed errors when using prototype board provided.
Additionally simplified specific menu names.
2017-10-01 14:20:50 +11:00
paulb-nl
ac16008076
Add reverse LPF feature
...
reverse LPF can be used to mostly reverse the blur on pre 1-CHIP SNES.
For best results use 256x240 optimized mode.
2017-09-27 22:43:26 +02:00
marqs
9d14cc776e
Misc small fixes and improvements
...
* Disable 480p scanlines in auto mode
* Remove inoperable 3x/4x processing modes from 1080i list
* Add 640x512 mode to 480p group and limit 480p sampler option to 525-line modes
* Fix occasional pixel repetion issue after HDMI<->DVI TX switch
* Add "Allow upsample2x" option
* Add comments to some unclear sections
2017-08-10 00:06:35 +03:00
marqs
2cd36cdd37
Fix PCM1862 input selection.
2017-06-12 01:00:34 +03:00
marqs85
a8887ce47d
Merge pull request #11 from 511141/patch-7
...
Language update
2017-06-11 11:52:34 +03:00
511141
fb8751da1e
language update
2017-06-07 13:17:17 +10:00
marqs
30af6b72f2
Merge branch 'release' of https://github.com/marqs85/ossc into release
2017-06-05 20:04:04 +03:00
borti4938
e9fbf2a1b9
bugfix: screwed up register definitions
2017-06-04 23:24:23 +02:00
marqs
cabc04b3b0
Add support for v1.6 pcb with PCM1862.
2017-06-05 00:02:01 +03:00
borti4938
5b5c8bc373
Update it6613_drv.c
...
lines outdated
2017-06-01 22:29:24 +02:00
borti4938
b471589ae1
Bugfix: audio down-sampling setting, clock settings
2017-06-01 21:23:22 +02:00
marqs
2aee3294e3
Fix HDTV mode parameters
2017-05-30 21:16:03 +03:00
marqs
2577470abe
Clean up TX setup code and add compatibility options
2017-05-29 20:43:24 +03:00
marqs
d98c23c8c1
Update project files to Quartus 17.0.
2017-05-29 19:15:34 +03:00
marqs
4f36278cb7
Sync processing rewritten and some issues fixed
...
* add 480i/576i line3x/4x
* clean up RTL and SDC
* update AVI infoframe properly
* add HDMI IT content option
2017-05-18 23:36:37 +03:00
marqs
01b5fe20ee
Sync and masking improvements
...
* detect VSM=1 properly
* increase mask brightness
* add L2 optimized modes
* fix internal vsync alignment
2017-05-18 23:36:37 +03:00
511141
339454bb8a
Language update
...
Revision 1.5
2017-04-12 12:32:33 +10:00
511141
39fefe2adc
Language update
...
Revision 1.4
2017-04-12 12:04:34 +10:00
511141
5771aa80ec
Language update
...
Revision 1.3
2017-04-12 11:51:21 +10:00
511141
f2910305ee
Language update
...
Update 1.2
2017-04-12 11:16:43 +10:00
511141
0f9e224888
Update menu.c
...
Revision 1.1
2017-04-10 20:55:21 +10:00
511141
cdad09cbcd
JP Language update
...
Revision 1.0
2017-04-10 19:21:19 +10:00
marqs
97428ba3ad
Add 288p line5x modes and hotkey for quick mode select
2017-02-12 02:37:46 +02:00
marqs
2c934c9dd0
Fix line3x 4:3 mode and VGA interlace detection
2017-02-09 23:14:24 +02:00
marqs
6e043ef577
Improve input mode handling
...
* New options and better compatibility for Line5x
* Add support for 960i and 1080i
* Make TVP HPLL2x option user-selectable
2017-02-07 23:04:30 +02:00
marqs
3b19b2843c
Preliminary Line5x implementation
2017-01-29 13:02:12 +02:00
marqs
d41c7522a0
Misc updates
...
* Fix mask placement and make its brightness adjustable
* Line4x
2017-01-24 00:18:15 +02:00
marqs
434186d64e
Improve lo-res mode processing features
...
* workaround for phase shift issue on optimized modes
* add hscale option for 256x240 opt Line3x mode
* distribute video modes to groups and allow passthru for all modes
2017-01-23 00:56:17 +02:00
marqs
a03c01ca4d
Keep track of last used profile and (optionally) input
2017-01-08 12:02:32 +02:00
marqs
d77c293b70
* Clean up some FPGA code
...
* Wrap sampling phase setting
* Enable hal.enable_lightweight_device_driver_api to reduce CPU code size
2016-12-31 14:18:21 +02:00
marqs
0f8439abf3
Profile support added.
2016-12-30 00:14:12 +02:00
marqs
79f215d41e
Minor fixes.
2016-12-27 11:16:08 +02:00
borti4938