- added unidasm to the tools build
- split the disassemblers out of libcpu and into new libdasm
- ensured the disassembly entry points for all disassemblers are
in the source file for the disassembler (sometimes new generic
versions were created)
Still needs command line options and file loading, but the
fundamentals are present, and it links.
to devintrf (including endianness). Removed space array from the
CPU class header. Made the memory system much more device-neutral.
Various other cleanups along the way.
Sent: Sunday, January 11, 2009 5:52 AM
To: submit@mamedev.org
Subject: unreachable code cleanup
This patch cleans up the usage of unreachable code (mostly
unnecessary breaks after returns in switch - case). A few case of
really unused code were also discovered. I marked thos with FIXME
comments.
I based this cleanup on teh output of cppcheck. It does still missing
a few cases of unreachable code, so there might be future patches to
address more cases.
bus width and shift CPU interface constants. Changed all the cores
to use them.
Minor spacing cleanup in Z80, Z180, TMS34010, ADSP21xx cores.
Changed ADSP21xx cores to accept a configuration struct instead of
using set_info to specify serial port callbacks. Simplified the
ADSP21xx get/set info significantly. Removed support for only
including certain variants of the chips; they are now either all
supported or all unsupported.
Sent: Tuesday, December 16, 2008 12:20 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Migrate CPU defines to cpu header files
Hi mamedev,
This patch migrates all the CPU definitions into the cpu header files.
The #defines and CPU_GET_INFO declarations were added by hand to the
cpu cores in the first patch, plus a few partly related fixes to the
non-DRC cores. The second patch was produced by the attached script
which inserts all needed #includes, except for two that were added by
hand in the first patch. The first patch also removed an extra define
of N2A03_DEFAULTCLOCK that would have caused problems with the second
patch.
~aa
from the CPU cores.
Disabled the use of PULSE_LINE for any input lines except NMI and RESET.
Added a helper function generic_pulse_irq_line() for doing a single-cycle
assert/deassert for those few drivers remaining that were trying to use
PULSE_LINE directly.
appropriate, and to keep all global variables hanging off the
machine structure. Once again, this means all state registration
call sites have been touched:
- state_save_register_global* now takes a machine parameter
- state_save_register_item* now takes a machine parameter
- added new state_save_register_device_item* which now uses
the device name and tag to generate the base name
Extended the fake sound devices to have more populated fields.
Modified sound cores to use tags from the devices and simplified
the start function.
Renumbered CPU and sound get/set info constants to align with
the device constants, and shared values where they were perfectly
aligned.
Set the type field in the fake device_configs for CPU and sound
chips to a get_info stub which calls through to the CPU and sound
specific get_info functions. This means the device_get_info()
functions work for CPU and sound cores, even in their fake state.
Changed device information getters from device_info() to
device_get_info() to match the CPU and sound macros.
works. Added callback parameters to the expression engine. Improved
CPU parsing so you can use a CPU tag or index in most commands that
take one. Switched to passing CPU and address space objects around
where appropriate. Lots of other minor tweaks.
Removed opbase globals to the address_space structure.
Cleaned up names of pointers (decrypted and raw versus rom and ram).
Added inline functions to read/write data via any address space.
Added macros for existing functions to point them to the new functions.
Other related cleanups.
state_save_combine_module_and_tag() function in favor of passing
the tag when registering. Revisited all save state item registrations
and changed them to use the tag where appropriate.
working on something, hold off syncing.
Defined macros for core CPU functions: CPU_INIT, CPU_RESET, CPU_EXIT,
CPU_EXECUTE, along with macros for the name and for calling, in the
spirit of the devintrf.h macros. More will come later.
Changed init, reset, exit, and execute interfaces to be passed a
const device_config * object. This is a fake object for the moment,
but encapsulates the machine pointer and token. Eventually this will
be a real device.
Changed the CPU IRQ callbacks to a proper type, and added a device
parameter to them.
Updated all CPU cores to the new macros and parameters.
Note that this changes the way we "pointer"-ify cores. I'll send an
update shortly.
This contains three different patches:
20080829.patch
Introducing the running_machine* parameter in a few more places. Next
step would be to make the execute_* function aware of it, if that's
OK. Also used the machine parameter in memory.c were it's available.
20080829_1.patch
The already discussed and probably being rejected removal of
dreprecat.h from debugger.h. I think this is a low-risk patch (we had
worse cleanups) and it lowers the risk of new code using deprecated
function beign introduced in MAME/MESS, because there is no invisible
inclusion of deprecat.h anymore (I think one driver - kofball.c - got
it with deprecated code).
20080829_2.patch
The last Machine -> machine conversion I had sitting in my local
tree. I know the proper way is to turn them into devices, but I still
haven't looked into that.
macro from the source code. All MAME builds now include
the debugger, and it is enabled/disabled exclusively by
the runtime command-line/ini settings. This is a minor
speed hit for now, but will be further optimized going
forward.
Changed the 'd' suffix in the makefile to apply to DEBUG
builds (versus DEBUGGER builds as it did before).
Changed machine->debug_mode to machine->debug_flags.
These flags now indicate several things, such as whether
debugging is enabled, whether CPU cores should call the
debugger on each instruction, and whether there are live
watchpoints on each address space.
Redesigned a significant portion of debugcpu.c around
the concept of maintaining these flags globally and a
similar, more complete set of flags internally for each
CPU. All previous functionality should work as designed
but should be more robust and faster to work with.
Added new debugger hooks for starting/stopping CPU
execution. This allows the debugger to decide whether
or not a given CPU needs to call the debugger on each
instruction during the coming timeslice.
Added new debugger hook for reporting exceptions.
Proper exception breakpoints are not yet implemented.
Added new module debugger.c which is where global
debugger functions live.
Subject: [patch] Remove more Machine globals, #include "deprecat.h"
Hi mamedev,
The attached patch goes through and converts a number of Machine
globals to machine locals, and then removes #include "deprecat.h" if
appropriate. The script that generated it is included, since the
patch itself is rather large and would have been time consuming to
produce otherwise.
The script doesn't convert cases of Machine that aren't in common
macros. I'll try to tackle those later if someone doesn't beat me to
it.
~aa
a new compile-time define (ENABLE_DEBUGGER). This means that MAME_DEBUG no longer means
"enable debugger", it simply enables debugging features such as assertions and debug code
in drivers.
Also removed the various levels of opbase protection in memory.h and always just turned
on full bounds checking.
Fixed build break due to missing ampoker.lay -> ampoker2.lay renaming.
The idea is to create extra work if a driver wants to use these and hopefully
gives an incentive to look for an alternate solution
- Added #include of deprecat.h that rely on these contructs
- Removed a bunch of unneccassary #include's from these files
Updated all CPU cores to return a CPUINFO_INT_CLOCK_MULTIPLIER of 1.
Changed the core to actually respect both CPUINFO_INT_CLOCK_MULTIPLIER and CPUINFO_INT_CLOCK_DIVIDER.
Updated a number of drivers to use cpunum_get_clock() instead of Machine->drv->cpu[x].clock.
***** Raw input clock speeds should now be specified for all CPUs in the MACHINE_DRIVER. *****
Removed explicit divisors from all drivers using the following CPU types,
which were already specifying non-1 values for CPUINFO_INT_CLOCK_DIVIDER:
* COP4x0
* I8039/8048 families
* M68(7)05, HD63705
* M6809E
* PIC16C5X
* TMS32010
* TMS340x0
In a few cases, it appears that the divisor was not being used, so I guessed in those cases whether or not
the specified clock speed was raw.
- removed years from copyright notices
- removed redundant (c) from copyright notices
- updated "the MAME Team" to be "Nicola Salmoria and the MAME Team"
