* new WORKING machines
---
Winnie the Pooh - Piglet's Special Day (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 21 external donators]
Spider-Man (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 21 external donators]
Dora the Explorer - Race to Play Park (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 21 external donators] (previous 'Race to Play Park' was renamed to 'Nursery Rhyme Adventure' last week)
new WORKING software list additions
---
jakks_gamekey_mv:bcatdoc Black Cat & Doc Ock [Sean Riddle, 21 external donators]
* notes (nw)
* actually demote jak_pooh for now, one of the minigames is very broken (nw)
* give jak_sdoo a menu button (nw)
* give default set of inputs a pause / menu button too (nw)
* describe problem better, half of the issue is a DRC bug (nw)
* new NOT WORKING
---
Excite Boxing (Japan) [Sean Riddle, Peter Wilhelmsen]
* new WORKING machines
---
Nicktoons (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 22 external donators]
new WORKING software list entries
---
jakks_gamekey_nk:volbird Nicktoons Vollyball & Birdie Putt
new NOT WORKING machines
---
Dream Life [Sean Riddle]
One Piece - Virtual Punching Battle (Japan) [Sean Riddle, Peter Wilhelmsen]
* new machines marked as NOT WORKING
---
Challenge Ai-chan! Excite Ping Pong (Japan) [Sean Riddle, Peter Wilhelmsen]
probably just needs inputs mapping
* new NOT WORKING machines
---
Play TV Soccer [Sean Riddle, Peter Wilhelmsen]
again, needs inputs
* new WORKING software list addition
---
jakks_gamekey_nk:popsnow Spongebob Sponge Pop & Snowball Showdown (15 AUGUST 2005 D) [Sean Riddle, 22 external donators]
* xavix - support global tile flipping
* new NOT WORKING software list entries
---
monon_color:bigwolf Xǐyángyáng yǔ huītàiláng-juézhàn miē xīng [Peter Wilhelmsen, zhongtiao1]
* new NOT WORKING software list additions
---
sega_beena_cart:fpc Fresh Pretty Cure [Sean Riddle, Team Europe]
New WORKING machines
---
Ms. Pac-Man 5-in-1 (Ms. Pac-Man, Pole Position, Galaga, Xevious, Mappy) (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, Peter Wilhelmsen, 19 external donators]
Disney Princess (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
New WORKING Software List entries
---
jakks_gamekey_nm:nrxdig New Rally X & Dig Dug [Sean Riddle, Peter Wilhelmsen, 19 external donators]
note, Pole Position is not really very playable at the moment due to raster rendering glitches, the rest are, aside from some obvious sound issues (nw)
New machines marked as NOT WORKING
---
Wheel of Fortune (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
There is a video rendering glitch (lkely another off by x lines raster issue) causing the letter selection text to not render properly, it appears the letters scroll instead of the text scroller below, which doesn't. (nw)
-spg2xx: Make rowscroll offset configurable, can't find register to control it, but JAKKS games need 0, while the chinese stuff needs 15 (nw)
-jak_wof: Marked as working, analog wheel isn't emulated, but is optional (I don't see where / how it maps) (nw)
-jak_wof: Improved inputs (nw)
-gamekeys now save to the gamekey seeprom not the system one (nw)
* new WORKING Software List entries
---
gamate:fortress Fortress of Fierceness [Peter Wilhelmsen]
new NOT WORKING Software List entries
---
ekara_japan_a:a7 A-7 Pichi Pichi Pitch Pure Chapter 3 (Japan) [Peter Wilhelmsen, Sean Riddle]
ekara_japan_a:a5 A-5 Pichi Pichi Pitch Karaoke Party (Japan) [Peter Wilhelmsen, Sean Riddle]
ekara_japan_a:a4 A-4 Pichi Pichi Pitch Pure Chapter 1 (Japan) [Peter Wilhelmsen, Sean Riddle]
ekara_japan_a:a1 A-1 Pichi Pichi Pitch vol.1 (Japan) [Peter Wilhelmsen, Sean Riddle]
new NOT WORKING clones
---
Play 2000 (Super Slot & Gran Tesoro) (v7.0i) (Italy) [Peter Wilhelmsen, Morten Shearman Kirkegaard]
* new WORKING machines
---
Dragon Ball Z (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 19 external donators]
* flag (nw)
* allow 'a7' to boot (nw)
* move XaviX2 sets to new files (nw)
* new machines marked as NOT WORKING
---
Let's TV Play Naruto [Peter Wilhelmsen, Sean Riddle]
This is another XaviX2 thing.
* new NOT WORKING machines
---
C2 Color [zhongtiao1]
35 in 1 Super Twins [Sean Riddle]
LeapPad [Sean Riddle]
My First LeapPad [Sean Riddle]
-leappad: Added software lists. [David Haywood]
-c2color: Added software lists. [David Haywood]
leappad note: Currently BIOS is not dumped for LeapPad, but some carts are, BIOS is dumped for My First LeapPad, but not carts. (nw)
c2color note: Again the internal ROM isn't dumped, but we need the placeholder driver for the software list hookup, 2 carts are dumped. (nw)
-vsmile: Added softlist loading for some of the trickier vsmile cases based on new dumps from Sean Riddle. Note, the Vsmile Motion game is 16MB so clearly needs some kind of banking. (nw)
----------------------------
V.Smile Baby (US) [Ryan Holtz]
New working clones
--------------------
V.Smile Baby (Sweden) [Ryan Holtz, Sean Ridde, Clawgrip]
-vsmileb: Split into a separate CPP file. Identified input codes and hooked up inputs. [Ryan Holtz, bmx]
* new NOT WORKING
----
Storio [Team Europe]
created this so that Clawgrip can add to it
* add seemingly pointless line to seemingly pointless file
* move info (nw)
* vtech (nw)
-vsmileb: Found enough port bits to show the VTech logo and V.Smile Baby intro. No game boots yet. [Ryan Holtz]
-spg2xx: Added separate logging for external interrupts and address mapping. [Ryan Holtz]
* new NOT WORKING --- Classic Arcade Pinball (JAKKS Pacific TV Game) [Sean Riddle, David Haywood]
* move to new driver instead (nw)
* minor note updates (nw)
* map inputs in matelcs (currently needs a hack to boot, so won't show anything yet) also removed a pointless bitswapping in a read function for some other stuff in the driver, and just correct the ports instead
* fix a typo (nw)
* note (nw)
* new NOT WORKING
---
Play TV Buckmasters Huntin' (NTSC) [Sean Riddle, Peter Wilhelmsen]
(gun needs mapping)
* new NOT WORKING
---
Track & Field Challenge [Sean Riddle, Clawgrip]
HELP! can't figure out what architecture this is, need to identify CPU type etc.
* rad_hnt digital controls (nw)
* more digital inputs (nw)
* change CPU type to G65816 based on feedback
* improve notes (nw)
- Add custom keyboard port and emulate most of the Expanded Typewriter Keyboard
- Add unidirectional printer port
- Use addressable latch devices to control various things, including disabling display during RAM test
- Hack to pass non-volatile memory test on uts10
* new NOT WORKING ClickStart [Sean Riddle, Clawgrip, TeamEurope] + a Software List for it
seems to be something missing, jumps to outside of code area, maybe secondary small internal ROM of CPU. I did think the dumps were half size for various reasons, but there is a checksum in the footer of each one that matches the data (even if another checksum in the header for some of them we can't match) Possible BIOS is wrong tho as that checksum in the footer doesn't match by quite a significant amount.
most games show something just by putting a 'RET' opcode in the upper areas it attempts to jump to.
Ryan credited in driver since it's more or less just a stripped down copy of vsmile.cpp
* more correct (although does less now because of extra checks in new code) (nw)
* (nw)
* (nw)
* XaviX work
new Software List items [Sean Riddle, David Haywood]
ekara_japan_d:dc0002 BAT Volume 6 (Japan) (DC0002-BAT)
ekara_japan_d:dc0005 TV Pop Volume 9 (Japan) (DC0005-TPJ)
ekara_japan_p:pc0001 BHT Volume 4 (Japan) (PC0001-BHT)
ekara_japan_p:pc0003 ENB Volume 1 (Japan) (PC0003-ENB)
ekara_japan_g:gc0001 BAT Volume 1 (Japan) (GC0001-BAT)
ekara_japan_g:gc0016 TV Pop Volume 5 (Japan) (GC0016-TPJ)
ekara_japan_web:ekaraweb12 e-kara Web cartridge 12M (blank) (Japan)
new clones
e-kara (US?, NTSC, set 2) [Sean Riddle]
enable support for 'p' type cartridges for use with ddrfammt [David Haywood]
various documentation improvements [Sean Riddle, David Haywood]
(there are also 3 bad dumps, currently commented out, will replace later)
* improved filenames (nw)
* for later (nw)
* checkpoint (nw)
* seeprom stuff (nw)
* (nw)
* correctly saves, does not correctly reload, also promote popira and ddrfammt to working
* new Software List entries [Sean Riddle, David Haywood]
ekara_japan:ec0001 J-Pop Mix Volume 1 (Japan) (EC0001-JPM)
ekara_japan:ec0032 ANM Volume 2 (Japan) (EC0032-ANM)
ekara_japan:ec0037 ENK Volume 4 (Japan) (EC0037-ENK)
ekara_japan:ec0046 J-Pop Mix Volume 20 (Japan) (EC0046-JPM)
ekara_japan:ec0005 J-Pop Mix Volume 5 (Japan) (EC0005-JPM)
ekara_japan:ec0007 1976-78 Volume 1 (Japan) (EC0007-G76)
ekara_japan:ec0079 ETZ (Japan) (EC0079-ETZ)
ekara_japan:ec0082 Matthew's Best Hit Selection (Japan) (EC0082-MBH)
ekara_japan:ec0009 ANM Volume 1 (Japan) (EC0009-ANM)
ekara_japan_en:en3 EN-3 (Japan)
ekara_japan_m:mc0013 KSM Mini Volume 5 (Japan) (MC0005-KSM)
ekara_japan_s:sc0012 SAI (series 3) Volume 3 (Japan) (SC0012-SAI)
ekara_japan_s:sc0004 SAI (series 1) Volume 1 (Japan) (SC0004-SAI)
ekara_japan_g:gc0002 BHT Volume 1 (Japan) (GC0002-BHT)
ekara_japan_g:gc0003 BAT Volume 2 (Japan) (GC0003-BAT)
ekara_japan_g:gc0004 BHT Volume 2 (Japan) (GC0004-BHT)
ekara_japan_p:pc0004 BHT Volume 7 (Japan) (PC0004-BHT)
* (nw)
* notes (nw)
* (nw)
* this register seems to be r/w (nw)
* fix crash in popira when pausing (requires register readback)
* save state stuff (nw)
* give excite fishing some inputs while I'm making misc minor changes (nw)
* also promote the Nostalgia games, and Card Night, as they have simple digital inputs and seem to work
* (nw)
* copy+paste modernization
* 2 more dumps (nw)
* doesn't seem to have an seeprom (nw)
* preliminary taikodp controls (nw)
* P4 uses SEEPROM (nw)
* rejig some bases (nw)
-sound/discrete, okim6295: Removed MCFG macros. [Ryan Holtz]
-norautp, osi, audio/mario: Removed MACHINE_CONFIG macros. [Ryan Holtz]
-vsmile: Split into its own driver from vii.cpp. [Ryan Holtz]
-vii: Fixed broken controller inputs. [Ryan Holtz]
-konamim2: Massive update. Most games work, but are still marked non-working due to rare MAME crashes in the PPC DRC. [Phil Bennett, Ryan Holtz]
Marked as non-working because the correct terminal isn't emulated, so we
can't fully verify that everything works. Run it with '-ser terminal' to
see the garbled output.
This also adds the clone Grundig FL-100.
* Added new driver: HP 3478A Multimeter
WIP, machine not working, skeleton, highly incomplete. Compiles, that's
about all.
* hp3478a: implement ROM banking
code runs "properly" at least to the CAL RAM check (fails, RAM not
implemented)
* hp3478a: some IO work
Interpret CS lines for external accesses (GPIB, CAL RAM, DIP switches).
Also, remove MCFG_ stuff
Also, use logmacro.h stuff
* hp3478a: partial emulation of LCD
The main CPU has a serial link to the LCD module. This WIP splits
commands and data mostly successfully (still some bogus shifting which
would be fairly easy to ignore). None of the commands are implemented
yet, and no actual display is generated yet.
Includes unrelated tweak : only change bank when the A12 line changes.
* hp3478a: added LCD rendering !
code shamelessly stolen from tranz330 and roc10937 drivers.
Not clickable yet.
* hp3478a: implement CAL NVRAM
Finally. IO mapping has provisions for the DIP switches as well as i8291
GPIB interface registers.
* hp3478a: improve LCD rendering
Remove some artifacts: with the LCD "not selected", some data is sent on IWA (probably
to purge a shift register ?) but was parsed with the last m_lcdiwa
state. Reset this everytime PWO is deselected.
Also parse decimal point, comma and "all segments".
* hp3478a: implement keypad
* hp3478a: CAL switch to write-protect NVRAM
* hp3478a: implement DIP switches
* hp3478a: fix self-test reset freeze (missing WDT)
There is an external WDT counter that is periodically reset by the CPU
in normal operation. When forcing a reset from the front panel, this
counter is allowed to overflow (20th bit, clocked at Xtal / 15), giving
a reset time of about 1.3s.
4D/20 is a Personal Iris. The IP15 ROM in this skeleton belongs to the IRIS POWER Series model 4D/4x0, so I've assumed that's what the driver should be for.
-mips3.cpp: Various changes: [Ryan Holtz]
* Added an #ifdef to display DPRINTF calls from the SGI O2 PROM.
* Switched R4000BE/LE, R4400BE, R4600BE, and R5000BE to 64-bit data bus.
* Fixed a bug that caused a crash with 64-bit data bus and the DRC.
-indy_indigo2.cpp: Moved a number of devices into HPC3. [Ryan Holtz]
-hpc3.cpp: Fixed an oversight with IRQs. [Ryan Holtz]
- Rename driver
- Remove skeleton QVT-102 we already had, add its alternate ROM to the
driver along with the keyboard MCU ROM
- Major gfx rendering update, supports all attributes but needs
verification
- Add NVRAM
-nscsi_cd.cpp: Added various new-SCSI CD-ROM devices which support 512-byte blocks by default. [Ryan Holtz]
-sgikbd.cpp: Added a rudimentary HLE SGI Indigo keyboard device. Still needs keys to be mapped. [Ryan Holtz]
-indigo.cpp: Various changes: [Ryan Holtz]
* Expanded logging.
* Enabled PIT8254 timer. Has the wrong clock value; the correct clock causes a hang.
* Improved RAM layout.
* Added stubs for DSP RAM and Entry-level graphics.
Two sample roms are missing, sad. Volume is not taken into account
yet (because the registers are not yet understood), pan is though.
Don't even think about reverb or effects :-)
Current code plays a scale in a loop. Comment the timer alloc in
machine_reset to kill that.
Demo song (missing lots of sounds, because roms): U then > until demo
then ENTER ENTER.
* [R9751] (Squashed) Early work on SMIOC emulation
commit 9b587be762abfd576e92792c612cd205c570924d
Author: Stephen Stair <sgstair@akkit.org>
Date: Tue Apr 10 19:41:55 2018 -0700
Connected SMIOC DMA to 68k
* SMIOC now reading bytes for serial from the 68k memory space successfully.
commit 0f801a05a3fa5b78768a1a2bcb9981466e8f2b0e
Author: Stephen Stair <sgstair@akkit.org>
Date: Tue Mar 27 18:31:32 2018 -0700
68k now running in lockstep with SMIOC for serial
* 68k now uses actual SMIOC as source of SMIOC status, so it waits for the SMIOC to complete commands before continuing.
* SMIOC DMA controllers now being asked to move bytes around
* "write character" (4100) commands to SMIOC are now completing and resulting in correct status being written and sent back to the 68k
* Every now and then the SMIOC stalls for a bit, it seems to be due to spending some time trying to communicate with the 8051 CPU (used to communicate with another cpu on the serial breakout box) that is not currently present in the emulated device.
Next Steps:
* We're going to move the terminal from the r9751 into the SMIOC, and hook it up to the DMA controllers as a hacky temporary solution.
* We need to emulate the 5xxxx memory range in SMIOC to proxy data to/from the 68k memory
* Then we'll start work on emulating the octal uart properly and hooking it up to RS232 channels.
commit ca91614fca3f43d87755d0c3439521276d7bfafb
Author: Stephen Stair <sgstair@akkit.org>
Date: Wed Mar 14 19:52:04 2018 -0700
Tinkering to get SMIOC further along
1) Enable 188 cpu to advance DMA immediatley if DRQ is held high when source synchronous DMA is started (It's not clear whether the DMA actually works this way yet)
2) Retrigger the DMA DRQ when a memory access is made to the DMA window (future work needed to proxy the reads/writes to the 68k's main memory) This is needed to support multibyte DMA reads/writes to the 68k window.
3) Reverse the bytes in the status register (based on current incomplete understanding of how this is encoded)
4) Connect the status register back to the r9751 on SMIOC status read
Current state: SMIOC's main board DMA state machine now completes the DMA transfer from the main board (With incorrect data), but we are still getting stuck.
Next steps: SMIOC is now hanging waiting on DMA to UART to complete, we need to implement some emulation of the UART and its connections to the surrounding 16 dma channels in order to make progress.
commit 62c1455c97a53ed970622e08cb03a225625914fd
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Mar 4 20:13:32 2018 -0800
Progress on emulating SMIOC
commit daee8498c5840417aee3ed9def0acfba5476335a
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Feb 25 20:02:32 2018 -0800
Working on bringing up SMIOC
Trying to get emulated SMIOC in lockstep with the main 68k.
commit 5a929fde90307040a0544682888f2f21a914b900
Author: Stephen Stair <sgstair@akkit.org>
Date: Wed Feb 21 20:06:27 2018 -0800
re-enable SMIOC, Logging improvements, first steps towards emulating on-board hardware.
commit f0c7a1665a18c99df5527ae45994f39f95223814
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Feb 11 16:26:31 2018 -0800
Emulation fix - Terminal now responds to input
commit ecff4035f3fdaa0329df46f99ccd516aa23ec8af
Author: Stephen Stair <sgstair@akkit.org>
Date: Tue Feb 6 19:00:35 2018 -0800
Hacky emulation of SMIOC
now successfully receiving serial characters!
commit 376bca90dff311d24e1f5014d8d6f0dc297bf671
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Jan 28 18:31:38 2018 -0800
Experimenting with SMIOC emulation
* Partial fixes for line state issues with persistent line values
When the AM9517 DMA controller mode is updated to change the polarity of DACK/DREQ, it doesn't update the DACK line values / request values (respectively).
This fixes this issue for one of the emulated devices in the file, but the other device has the same problem.
* Add skeleton of SCC2698B UART device
* Early progress on emulating SCC2698B Octal UART
Core structure for IO lines and writing registers is in place.
* Update address maps to new format.
* SCC2698b: Add tx/rx, baud rate generation
* Emulation improvements for scc2698b device
* MPP output pins emulated
* Improved logging for baud rate changes
* Channel configuration emulated
* Support for TX/RX Enable
* Started integrating new features into SMIOC
* Minor progress on the path to enabling new UART for SMIOC
* Resolved code issues related to upstream changes
* Working around an apparent problem with callbacks on sub-device devices
* Terminal added for serial port attached to SCC2698B UART.
* Things compile and seem to work.
* SMIOC: Serial is now outputting correctly through emulated SMIOC
Some glitches to work out, but this is nearly ready.
* AM9517a should not forget about input line status on master reset.
* Disable tracing
* SMIOC: Improving diagnostics and making some progress on the emulation
* Revised tracing in SMIOC and SCC2698B
* Improved tracing approach in r9751
* Minor progress towards working SMIOC emulation.
* [R9751] Update drivers to new code patterns after rebase
Rebased on latest mame, Fixed a few issues and updated the callback code patterns based on recent changes in devcb
* [R9751] Improve logging, fix interrupt race
Serial no longer drops output characters
* [R9751] Working on SMIOC emulation
Improved SMIOC emulation accuracy, Made some progress in getting through the disktool initialization sequence, but we are still hitting a problem - It looks like disktool should be resetting the SMIOC board when it starts, but the mechanism for this has not been found.
* [R9751] Improve tracing for system board registers
* [R9751] Improve SMIOC emulation
Still having some trouble with SMIOC but this seems to be an improvement.
SMIOC is now waiting for a status to be read before applying a new status, and mandatory parameter read logic is in place.
* [R9751] Incremental emulation improvements
the SMIOC failure was understood and fixed, and a new approach to getting the hardware to bootstrap correctly was implemented - Still having some problems with it though.
* [R9751] Fixed emulation issues
* Disktool now boots to the console
* UART receive only partly working, I don't think it's fully connected yet.
* [R9751] Further progress on SMIOC emulation
* Figured out the missing command parameter interface to the SMIOC board
* Still blocked because the SMIOC interface to the breakout board through an onboard 8051 is not emulated and the disktool software depends on properties coming from it.
* [R9751] Terminal is fully working for disktool
* Improved the emulation of the 80188 to 451 connection in order to reliably set a status bit disktool depends on.
* [R9751] Fix build after rebase
* [R9751] Cleanup, tracing improvements
* Remove second emulated terminal - SMIOC is now stable enough to run the terminal.
* Remove older and unnecessary emulation/tracing code
* r9751: Fix compile error and modify copyright holders
