- Rewrite memory system, now allows supporting expansion devices and better prepared for contention emulation
- Add expansion interfaces for rear expansion, drive ports and mouse
- Now supports the following rear expansion devices:
* Blue Alpha Sound Sampler
* Dallas Clock
* 1 Mb Interface
* SAMBUS 4-slot Expansion Interface (with clock)
* SID Interface (6581 and 8580 variants)
* S.P.I. SAM Parallel Interface
* Voicebox
- Added support for the Atom HDD interface, used in place of a floppy drive
- Simplified and cleaned up driver
- Temporarily deactivated joystick code, interferes with the keyboard
-tsb12lv01a: Added a skeleton device for the TI TSB12LV01A IEEE 1394 link-layer controller. [Ryan Holtz]
-ibm21s850: Added a skeleton device for the iBM 21S850 IEEE 1394 PHY controller. [Ryan Holtz]
New machines marked as NOT_WORKING
----------------------------------
RS-70 648-in-1 [David Shah]
-mk3b: Added a skeleton driver for the Monkey King 3B SoC. [David Shah]
Available keyboards are us (M0110, U.S.), gb (M0110B, British), fr
(M0110F, French), pad (M0120F, numeric keypad with passthrough port)
and plus (M0110A, U.S. with integrated numeric keypad). The mac128k,
mac512k and mac512ke drivers default to the numeric keypad with the
U.S. keyboard connected to the passthrough port; the macplus driver
defaults to the U.S. keyboard with integrated numeric keypad.
Note that the numeric keypad may seem strange. Four of the operators
work as cursor arrows if you don't hold shift. There is a comma on one
of the keys, but by the time System 6 was released, Apple had decided
an equals sign was more useful, so that's what it will produces on
newer system versions. The U.S. keyboard with integrated numeric
keypad emulates these aspects of the stand-alone keypad - pressing the
operator keys on the keypad sends fake shit key down/up events, and
using the arrow keys while holding shift will produces operator
characters rather than selecting text.
The ISO layout keyboards (M0110B and M0110F) produce different scan
codes to the ANSI keyboards (M0110 and M0110A) but they don't report a
different identification byte. To use an ISO keyboard, you must open
the Keyboard control panel and change the layout to International (and
change it back to Domestic if you switch back to an ANSI keyboard).
This doesn't actually work at the moment due to issues with 6522 VIA
emulation, but it will work with macplus sys603 if applied on top of
revision 963a2c166d.
-----------------------------------------------------------------------
* moved schick.cpp out of pengo driver, too many small modifications to the hardware make it messy to keep there (nw)
also promoted some sunplus games I've decided work well enough to promote (nw)
* (nw)
* (nw)
- Added emulation of the SPG290 CDServo
- Added joypad inputs
- Added RFID card support
- Split SPG290 PPU, Timers and I2C into separate devices
- Added a softlist for the RFID cards
----------------------------------
Novation BassStation Rack Analogue Synthesizer Module [DBWBP]
Novation Drum Station [DBWBP]
Novation Super Bass Station [DBWBP]
Add disassembler and skeleton CPU device for Panasonic MN1880 architecture [AJR]
* mw8080bw: update 280zzzap audio API in preparation for netlist audio
This is only API changes, following the pattern used by cuavas within the
past year to update other games in mw8080bw.
* mw8080bw: new netlist audio implementation for 280zzzap
New netlist-based audio implementation for 280zzzap (280-ZZZAP, 1976),
derived from Midway game logic board schematic. The sound generally
matches that heard in videos of the machine, though the real machine
seems to have more bass and less treble. This may be a cabinet effect
or something else, such as a difference in component values.
Due to the number of complex components being emulated and the nature
of the circuits, this netlist adds a lot of overhead, but it's still
fast enough to run at greater than real speed on modern hardware.
With minor changes, this implementation should also support lagunar
(Laguna Racer, 1977); with somewhat more substantial changes, it
would also support sspeedr (Super Speed Race, 1979). Both of these
games use sound circuits based on those for 280-ZZZAP.
* Demoted Quizard and Quizard 2 sets to non-working.
* Started hooking up the Quizard MCU.
* Renamed CDI_SLAVE to CDI_SLAVE_HLE in prep for an LLE device.
* Added more comprehensive notes to the driver.
* Removed NO_DUMP cdic.bin as the CDIC is apparently not an MCU.
* Copied SERVO and SLAVE MCUs into cdimono1 set from cdi910 set and marked with BAD_DUMP.
* move i/o handlers to specific maps, untangle register array usage, to be completed
* Nuke duplicate I/O accesses, rename to iobus_r/w, make go_w to be an actual line
* Fix addqmod & subqmod modulo mask for DSP
* Refactor TOM to host CPU function, and fix GPU irq lv 3 when a GPU object is encountered. Fixes mutntpng and atarikrt booting
* Fix Jaguar irq line to 2, trusted
* Start reworking the blitter
* Relicensed to BSD
- Add and hook up interrupt controller and timer
- Add keyboard support (HLE)
- Clean up and improve graphics handling
- Add initial cassette support (not working)
- Add centronics printer support
- Add beeper
- More info to dip switches
* new WORKING machines
Millennium M505 Arcade Neo Portable Spielkonsole (Family Sport 100-in-1) [TeamEurope]
* new NOT WORKING software list entries
tvgogo.xml : Baseball (US) [Sean Riddle, David Haywood]
tvgogo.xml : What-A-Mole (US) [Sean Riddle, David Haywood]
* added internal NAND dump to didj [Sean Riddle, Clawgrip]
--------------------
MDT 60 Video Display Terminal [Bitsavers, AJR]
z29: Add skeleton for undumped keyboard; try (and fail) to make this work with the MDT 60 keyboard instead
z22: Separate driver (nw)
new machines marked as NOT WORKING
----
Mastery's Fury [Miso Kim, David Haywood]
(this is a bad dump, mask ROMS are half size, at least the sprites)
new WORKING machines
----
Goori Goori [Miso Kim, David Haywood]
- Use generic latch devices for sound communications
- More accurate handling of programmed sound resets
- Add the other LS259 to gauntlet.cpp
- Correct watchdog timeouts for all three drivers
- General code cleanup
atarigen: Eliminate ATARI_CLOCK_xxxMHz macros in favor of standard XTAL constants (nw)
atariscom: Separate source file from atarigen.cpp; move IRQ handling to atarijsa (not a property of the actual device) (nw)
----
leapfrog_didj_cart.xml: Nicktoon Android Invasion (US, 500-13290-B) [Team Europe]
there's a skeleton driver too, but it's really nothing but a holder for the Software List as the BIOS isn't yet dumped.
- PAC2 is now a separate bus with slot devices
- Kanji ROM and RAM PAC2 expansions are no longer built into pasopia7, but may be configured as slot options
- RAM PAC2 expansion made nonvolatile and provided in multiple sizes
- Two PAC2 slots added to pasopia
* Split S-SMP and S-DSP implement in snes_snd.cpp
both convert memory handler into device_memory_interface, Internalize ROM region of S-SMP
s_smp.cpp : Use callback for S-DSP interface, Split internal and external memory space
snes.cpp : Convert WRAM into shared_ptr
* s_dsp.cpp : Reduce #define macros
* mw8080bw: new netlist audio implementation for gunfight
New netlist-based audio implementation for gunfight (Gun Fight, 1975),
derived from Midway audio schematics. Sound checked against several
YouTube videos and seems to match, apart from acoustic effects of
cabinet. (Sorry, I don't have a Gun Fight machine of my own to check. :)
Removed the old sample-based sound, which is no longer necessary. (The
samples for that version were actually from the newer game Boot Hill
and didn't match Gun Fight's sound hardware; they even included Boot
Hill's funeral march tune!)
Although the netlist version has much greater overhead, performance is
still acceptable on modern hardware.
* mw8080bw: remove unnecessary trampolines from gunfight netlist audio
In response to review comments on PR #6509.
* mw8080bw: Remove leftover copyright holder from new files (nr)
--------------------
Sensor Chess [hap, bataais]
New working software list additions
-----------------------------------
saitek_schess: Classical Style Super Strong [hap, bataais]
----------------------------------
Roland S-50 Digital Sampling Keyboard [DBWBP]
Roland W-30 Music Workstation [DBWBP]
New clones marked as NOT_WORKING
--------------------------------
Roland S-550 Digital Sampler [DBWBP]
----------------------------------
Roland S-10 Digital Sampling Keyboard [DBWBP]
Roland S-220 Digital Sampler [DBWBP]
New clones marked as NOT_WORKING
--------------------------------
Roland MKS-100 Digital Sampler [DBWBP]
* new NOT WORKING
----
TV Fitness Center (Lexibook) [TeamEurope]
Lexibook Retro TV Game Console - Frozen - 300 Games [TeamEurope]
the TV Fitness you can select games etc. but inputs aren't fully mapped, Frozen is a more enhanced NES VT clone than we support (nw)
* new NOT WORKING
----
Haluatko miljonääriksi? (Finland) [Sean Riddle, Santeri Saarimaa]
surprisingly on entirely different hardware to the otherwise identical from the outside, aside from stickers UK version (nw)
* new WORKING machines
----
Double Players Mini Joystick 80-in-1 (MJ8500, ABL TV Game) [Sean Riddle, David Haywood]
* might as well drop the non-working tag here, issues are minor (nw)
* was a PAL unit (nw)
* minor vt refactoring (nw)
----------------------------------
Roland JX-8P Polyphonic Synthesizer (Ver. 3.x) [DBWBP]
Roland JX-10 Super JX Polyphonic Synthesizer [DBWBP]
New clones marked as NOT_WORKING
--------------------------------
Roland JX-8P Polyphonic Synthesizer (Ver. 2.x) [DBWBP]
Roland MKS-70 Super JX Polyphonic Synthesizer [DBWBP]
