* Separate Microsoft 2-button mouse and Logitech 3-button Microsoft-compatible mouse
* Add Microsoft wheel mouse
* Make Mouse Systems mouse behave more realistically
* Add Mouse Systems "rotatable" mouse
* Simplify code and eliminate timers
(nw) X/Y translation and buttons works for all devices. The wheel on
the wheel mouse seems to be transmitting the right data, and CuteMouse
detects the wheel as being present, but no software seems to support it
properly. Software supporting the Mouse Systems "rotatable" mouse is
very rare - typically people just set the DIP switches on their M-1 for
"non-rotatable" mode. A standard mouse driver will see the "rotatable"
mouse moving two mickeys for each count, and move eratically on
rotation. The "rotable" mouse is poorly tested due to lack of software.
(nw) MAME doesn't have a proper input type for a mouse wheel, and it
doesn't seem to be possible to map the host mouse wheel to an axis when
configuring inputs. The default mapping ends up assigining the wheel or
rotation to one of the translation axes, which is very unhelpful.
Also add notes to Sun keyboard emulation.
There's a hack to make the 1200 Baud mouse actually run at 9600 Baud.
This is necessary because the SCC is incorrectly expecting 9600 Baud
rather than 1200 Baud. I don't have time to fix the SCC, so I'd
appreciate it if someone else would.
There's no way it should be expecting 9600 Baud on the mouse port.
Solaris 2.3 and later support 1200 Baud and 4800 Baud, and earlier
versions support 1200 Baud only. No version of Solaris works with a
9600 Baud mouse.
The workaround allows the mouse to be used in SunView on sun4_60 - I
haven't tested any other drivers.
-sparc: Added stubbed-out IFLUSH instruction to fix illegal instruction exceptions in SunOS 4.1.4 installer. [Ryan Holtz]
-nscsi: Added optional verbose logging of data transfers. [Ryan Holtz]
-timekpr: Switched to use the new logmacro system. [Ryan Holtz]
-sun4c: Can now successfully install SunOS 4.1.4. [Ryan Holtz]
* Hooked up auxiliary I/O port.
* Hooked up bus timeout on unmapped RAM ranges, per documentation.
* Changed FDC type to i82072, per documentation.
* Silenced a ton of logging.
* Reworked IRQ handling and added support for software interrupts.
- Default RXD to 1 to eliminate spurious break condition
- Correct CTS level in RR0 after "Reset External/Status Interrupt" command
- Allow immediate inactivation of RTS output when nothing is being transmitted
