* Add huc6230 Emulation
huc6272.cpp : Add ADPCM transfer, Add save states
PC-FXGA for PC-9801 C Bus is released in December 1995 in Japan, Correct metadata
* huc6272.cpp : Fix ADPCM address
* huc6230.cpp : Simpler interpolate
* huc6230.cpp : Fix clamp
huc6272.cpp : Fix ADPCM nibble
* huc6272.cpp : Fix data type
* Revert pcfxga year; PC-FXGA for PC9801 C-bus is not dumped?
- split into separate sources
- fixed paste
- added uart and rs232
- added baud rate clock or brg depending on hardware
- fixed uart status on sys80
- fixed cassette waveform
- lots of tidy up
- Added FDC card.
- Cursor now generated by 6845.
New working machines
--------------------
Acorn System 3 (6502 CPU)
Acorn System 5
New working clones
------------------
Acorn System 2
Acorn System 4
* Added ps2timer device to encapsulate Playstation 2 timers.
* Temporarily hacked R5900 core to always have scratchpad RAM mapped at 0x70000000.
* Added reference counting to divtlb so that it does not unmap pages that are still shared with other entries.
* Added a considerable amount of logging to ps2sony.cpp.
-mips3: Added basic Emotion Engine support. [Ryan Holtz]
* Added S bit to TLB mapping.
* Added support for VSUB, VIADD, VSQI, VISWR, VOR, LQ, SQ, MFSA, MTSA, MFHI1, MFLO1, MULT1, DIV1, DIVU1, PEXTLW, PADDUW, PMFHI,
PMFLO, PCPYLD, PCPYUD, SQC2, LQC2 opcodes. [Ryan Holtz]
* Remove vram_rw and ctrl_rw wrapper functions
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: replace hardcoded display width by m_fb_width
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: prepare topcat for multi plane operation
framebuffer vram is only 1 bit wide.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* 98544: set single topcat plane
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add nereid mapper used on HP98543/98545 graphic cards
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* prepare for multi-topcat operation
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add HP 98543 4 plane graphics card
* hp9k_3xx: add hp98543 card
* topcat,nerid: disable VERBOSE
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp98543: use required_device_array
* 98543: use required_region_ptr
* 98544: use required_region_ptr
* topcat: add save state support
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: add save state support
* hp98544,hp98543,topcat: use shared memory space
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: remove redundant variable
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat, nereid: remove trailing underscore from include guard
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat,hp98543: code style fixes proposed in PR
Signed-off-by: Sven Schnelle <svens@stackframe.org>
- Implemented banking and system/user mode switching.
- Added PolyBASIC 3.0, 3.1, and 3.4.
New clones marked as NOT_WORKING
--------------------------------
Poly 1 Educational Computer (early) [Nigel Barnes, Andrew Trotman]
Poly 2 Learning System [Nigel Barnes, Andrew Trotman]
Poly Development System [Nigel Barnes, Andrew Trotman]
Merged with strnskil.cpp, with modernization and cleanups. (nw)
Add MCFG_SCREEN_RAW_PARAMS. (nw)
Added coin counters to markham, strnskil, banbam and clones.
* proposal: move z80daisy* to devices/machine
Seems to me this is a machine, not a CPU? Main reason was to stop the Z80 CPU from being dragged into systems that don't have one just because they use a Z80 family peripheral.
* missed this one (nw)
* missed a spot (nw)
* interpro: slotify mouse (nw)
Needed to make the mouse a slot device to enable it to be connected to graphics boards under development.
* add validity check (nw)
* bt45x: new devices
Basic implementation of various Brooktree RAMDAC devices. Two of these (bt457, bt458) are used by InterPro graphics boards currently under development, the others are unused/untested at this point.
* bt45x: tweak descriptions (nw)
Start replacing special device macros with additional constructors,
starting with ISA, INTELLEC 4 and RS-232 buses.
Allow an object finder to take on the target of another object finder.
(For a combination of the previous two things in action, see either the
INTELLEC 4 driver, or the Apple 2 PC Exporter card. Also check out
looping over a device finder array to instantiate devices in some
places. Lots of things no longer need to pass tags around.)
Start supplying default clocks for things that have a standard clock or
have all clocks internal.
Eliminate the separate DEV versions of the DEVCB_ macros. Previously,
the plain versions were a shortcut for DEVICE_SELF as the target. You
can now supply a string tag (relative to current device being
configured), an object finder (takes on the base and relative tag), or
a reference to a device/interface (only do this if you know the device
won't be replaced out from under it, but that's a safe assumption for
your subdevices). In almost all cases, you can get the effect you want
by supplying *this as the target.
Eliminate sound and CPU versions of macros. They serve no useful
purpose, provide no extra checks, make error messages longer, add
indirection, and mislead newbies into thinking there's a difference.
Remove a lot of now-unnecessary ":" prefixes binding things relative to
machine root.
Clean up some miscellaneous rot.
Examples of new functionality in use in (some more subtle than others):
* src/mame/drivers/intellec4.cpp
* src/mame/drivers/tranz330.cpp
* src/mame/drivers/osboren1.cpp
* src/mame/drivers/zorba.cpp
* src/mame/devices/smioc.cpp
* src/devices/bus/a2bus/pc_xporter.cpp
* src/devices/bus/isa/isa.h
* src/devices/bus/isa/isa.h
* src/devices/bus/intellec4/intellec4.h
- High level emulation of serial keyboard (only sort of works; probably should be less sophisticated)
- Add double height and double width attributes
- Adjustable start of screen pointer (necessary for SET-UP mode)
- Reconfigure screen for 80/132-column and 50/60 Hz modes
dikeyboard: Add scan_complete callback (nw, sort of hacky but cit101 keyboard works worse without it)
- Use device_resolve_objects to resolve callbacks in output_latch_device (nw)
Note that this renaming is not just for human convenience; genie seems to get confused by modifications to a header called latch.h and decides to recompile everything involving gen_latch.h as well.
