bus width and shift CPU interface constants. Changed all the cores
to use them.
Minor spacing cleanup in Z80, Z180, TMS34010, ADSP21xx cores.
Changed ADSP21xx cores to accept a configuration struct instead of
using set_info to specify serial port callbacks. Simplified the
ADSP21xx get/set info significantly. Removed support for only
including certain variants of the chips; they are now either all
supported or all unsupported.
Sent: Tuesday, December 16, 2008 12:20 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Migrate CPU defines to cpu header files
Hi mamedev,
This patch migrates all the CPU definitions into the cpu header files.
The #defines and CPU_GET_INFO declarations were added by hand to the
cpu cores in the first patch, plus a few partly related fixes to the
non-DRC cores. The second patch was produced by the attached script
which inserts all needed #includes, except for two that were added by
hand in the first patch. The first patch also removed an extra define
of N2A03_DEFAULTCLOCK that would have caused problems with the second
patch.
~aa
Sent: Saturday, December 06, 2008 4:52 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Deprecat.h cleanup
Hi mamedev,
This patch changes some global Machine references to use machine,
device->machine, ... instead, and removes any unneeded #include
"deprecat.h" lines as well (about 10% of them in fact). It was
generated using the attached script, and then reverting some cases
where it was overzealous.
~aa
appropriate, and to keep all global variables hanging off the
machine structure. Once again, this means all state registration
call sites have been touched:
- state_save_register_global* now takes a machine parameter
- state_save_register_item* now takes a machine parameter
- added new state_save_register_device_item* which now uses
the device name and tag to generate the base name
Extended the fake sound devices to have more populated fields.
Modified sound cores to use tags from the devices and simplified
the start function.
Renumbered CPU and sound get/set info constants to align with
the device constants, and shared values where they were perfectly
aligned.
Set the type field in the fake device_configs for CPU and sound
chips to a get_info stub which calls through to the CPU and sound
specific get_info functions. This means the device_get_info()
functions work for CPU and sound cores, even in their fake state.
Changed device information getters from device_info() to
device_get_info() to match the CPU and sound macros.
works. Added callback parameters to the expression engine. Improved
CPU parsing so you can use a CPU tag or index in most commands that
take one. Switched to passing CPU and address space objects around
where appropriate. Lots of other minor tweaks.
Removed opbase globals to the address_space structure.
Cleaned up names of pointers (decrypted and raw versus rom and ram).
Added inline functions to read/write data via any address space.
Added macros for existing functions to point them to the new functions.
Other related cleanups.
state_save_combine_module_and_tag() function in favor of passing
the tag when registering. Revisited all save state item registrations
and changed them to use the tag where appropriate.
related APIs now take a device pointer instead of an index.
All functions that take a CPU device are prefixed with cpu_*
All functions that are globally related to cpu execution
are prefixed with cpuexec_*. Below is a list of some of the
mappings:
cpu_boost_interleave -> cpuexec_boost_interleave
cpunum_suspend -> cpu_suspend
cpunum_resume -> cpu_resume
cpunum_is_suspended -> cpu_is_suspended
cpunum_get_clock -> cpu_get_clock
cpunum_set_clock -> cpu_set_clock
cpunum_get_clockscale -> cpu_get_clockscale
cpunum_set_clockscale -> cpu_set_clockscale
cpunum_get_localtime -> cpu_get_local_time
cpunum_gettotalcycles -> cpu_get_total_cycles
activecpu_eat_cycles -> cpu_eat_cycles
activecpu_adjust_icount -> cpu_adjust_icount
cpu_trigger -> cpuexec_trigger
cpu_triggertime -> cpuexec_triggertime
cpunum_set_input_line -> cpu_set_input_line
cpunum_set_irq_callback -> cpu_set_irq_callback
In addition, a number of functions retain the same name but
now require a specific CPU parameter to be passed in:
cpu_yield
cpu_spin
cpu_spinuntil_time
cpu_spinuntil_int
cpu_spinuntil_trigger
cpu_triggerint
Merged cpuint.c into cpuexec.c. One side-effect of this
change is that driver reset callbacks are called AFTER the
CPUs and devices are reset. This means that if you make
changes to the CPU state and expect the reset vectors to
recognize the changes in your reset routine, you will need
to manually reset the CPU after making the change (since it
has already been reset).
Added a number of inline helper functions to cpuintrf.h for
managing addresses
Removed cpu_gettotalcpu(). This information is rarely needed
outside of the core and can be obtained by looking at the
machine->cpu[] array.
Changed CPU interrupt acknowledge callbacks to pass a CPU
device instead of machine/cpunum pair.
Changed VBLANK and periodic timer callbacks to pass a CPU
device instead of machine/cpunum pair.
Renamed all information getters from cpu_* to cpu_get_* and
from cputype_* to cputype_get_*.
* added a set of cpu_* calls which accept a CPU device object;
these are now the preferred means of manipulating a CPU
* removed the cpunum_* calls; added an array of cpu[] to the
running_machine object; converted all existing cpunum_* calls
to cpu_* calls, pulling the CPU device object from the new
array in the running_machine
* removed the activecpu_* calls; added an activecpu member to
the running_machine object; converted all existing activecpu_*
calls to cpu_* calls, pulling the active CPU device object
from the running_machine
* changed cpuintrf_push_context() to cpu_push_context(), taking
a CPU object pointer; changed cpuintrf_pop_context() to
cpu_pop_context(); eventually these will go away
* many other similar changes moving toward a model where all CPU
references are done by the CPU object and not by index
Sent: Wednesday, November 05, 2008 8:22 AM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Add ADDRESS_MAP_NAME macro
Hi mamedev,
In theory, MAME's interface macros should completely hide the naming
conventions from the drivers and sound/cpu cores. So as an
experiment, I renamed all the core apis and looked to see what broke.
The most common api coupling was with address maps in the CPU cores,
which this patch addresses by introducing a new macro,
ADDRESS_MAP_NAME (mimicing what is done in devintrf.h). There were a
handful of related problems in some drivers which this patch also
fixes. Some remaining issues I left alone (laserdisk apis reference
rom, video_update, machine_config, ksys573 use of nvram_handler,
megadriv use of ipt), in principle all the apis need _NAME variants to
encode the conventions.
~aa
working on something, hold off syncing.
Defined macros for core CPU functions: CPU_INIT, CPU_RESET, CPU_EXIT,
CPU_EXECUTE, along with macros for the name and for calling, in the
spirit of the devintrf.h macros. More will come later.
Changed init, reset, exit, and execute interfaces to be passed a
const device_config * object. This is a fake object for the moment,
but encapsulates the machine pointer and token. Eventually this will
be a real device.
Changed the CPU IRQ callbacks to a proper type, and added a device
parameter to them.
Updated all CPU cores to the new macros and parameters.
Note that this changes the way we "pointer"-ify cores. I'll send an
update shortly.
The structures/names were getting too complex for my macros to handle. They would require hand editing and my computer is too slow to keep re-compiling.
Passes a clean compile.
macro from the source code. All MAME builds now include
the debugger, and it is enabled/disabled exclusively by
the runtime command-line/ini settings. This is a minor
speed hit for now, but will be further optimized going
forward.
Changed the 'd' suffix in the makefile to apply to DEBUG
builds (versus DEBUGGER builds as it did before).
Changed machine->debug_mode to machine->debug_flags.
These flags now indicate several things, such as whether
debugging is enabled, whether CPU cores should call the
debugger on each instruction, and whether there are live
watchpoints on each address space.
Redesigned a significant portion of debugcpu.c around
the concept of maintaining these flags globally and a
similar, more complete set of flags internally for each
CPU. All previous functionality should work as designed
but should be more robust and faster to work with.
Added new debugger hooks for starting/stopping CPU
execution. This allows the debugger to decide whether
or not a given CPU needs to call the debugger on each
instruction during the coming timeslice.
Added new debugger hook for reporting exceptions.
Proper exception breakpoints are not yet implemented.
Added new module debugger.c which is where global
debugger functions live.
trace through in a debug build, yet should operate the same as before.
Created a complete set of functions for all databus sizes (8,16,32,64) and
all endiannesses. A few functions are redundant, but it is now very clear
which functions to use in which scenarios. It is also now possible to rely
on being able to access values of 8, 16, 32 or 64 bits via the built-in
accessors without fear of crashing.
Updated all cores using 8-bit handlers to explicitly call the 8-bit handlers
with the appropriate endianness.
Fixed a few games which were calling n-bit handlers directly to use the
generic forms. In the future, this is all the access drivers will have.
MRA*_BANK*/MRA*_BANK* -> SMH_BANK*
MRA*_RAM/MRA*_ROM -> SMH_RAM
MRA*_ROM/MWA*_ROM -> SMH_ROM
MRA*_NOP/MWA*_NOP -> SMH_NOP
MRA*_UNMAP/MWA*_UNMAP -> SMH_UNMAP
This removes the silly need for a bunch of redundant constants
with faux type definitions that didn't buy anything.
Moved some memory system constants into memory.c.
Converted address maps to tokens. Changed the address_map structure
to house global map-wide information and hung a list of entries off
of it corresponding to each address range. Introduced new functions
address_map_alloc() and address_map_free() to build/destroy these
structures. Updated all code as necessary.
Fixed several instances of porttagtohandler*() in the address maps.
Drivers should use AM_READ_PORT() macros instead.
ADDRESS_MAP_EXTERN() now is required to specify the number of
databits, just like ADDRESS_MAP_START.
Removed ADDRESS_MAP_FLAGS() grossness. There are now three new macros
which replace its former usage. ADDRESS_MAP_GLOBAL_MASK(mask)
specifies a global address-space-wide mask on all addresses. Useful
for cases where one or more address lines simply are not used at
all. And ADDRESS_MAP_UNMAP_LOW/HIGH specifies the behavior of
unmapped reads (do they come back as 0 or ~0).
Changed internal memory mapping behavior to keep only a single
address map and store the byte-adjusted values next in the address
map entries rather than maintaining two separate maps. Many other
small internal changes/cleanups.
a new compile-time define (ENABLE_DEBUGGER). This means that MAME_DEBUG no longer means
"enable debugger", it simply enables debugging features such as assertions and debug code
in drivers.
Also removed the various levels of opbase protection in memory.h and always just turned
on full bounds checking.
Fixed build break due to missing ampoker.lay -> ampoker2.lay renaming.
The idea is to create extra work if a driver wants to use these and hopefully
gives an incentive to look for an alternate solution
- Added #include of deprecat.h that rely on these contructs
- Removed a bunch of unneccassary #include's from these files
Updated all CPU cores to return a CPUINFO_INT_CLOCK_MULTIPLIER of 1.
Changed the core to actually respect both CPUINFO_INT_CLOCK_MULTIPLIER and CPUINFO_INT_CLOCK_DIVIDER.
Updated a number of drivers to use cpunum_get_clock() instead of Machine->drv->cpu[x].clock.
***** Raw input clock speeds should now be specified for all CPUs in the MACHINE_DRIVER. *****
Removed explicit divisors from all drivers using the following CPU types,
which were already specifying non-1 values for CPUINFO_INT_CLOCK_DIVIDER:
* COP4x0
* I8039/8048 families
* M68(7)05, HD63705
* M6809E
* PIC16C5X
* TMS32010
* TMS340x0
In a few cases, it appears that the divisor was not being used, so I guessed in those cases whether or not
the specified clock speed was raw.
- removed years from copyright notices
- removed redundant (c) from copyright notices
- updated "the MAME Team" to be "Nicola Salmoria and the MAME Team"
The attached patch adjusts most conditional logging in MAME to use the
idiom "do { if (VERBOSE) logerror x; } while (0)". This has the
benefit that the compiler checks the syntax of the logging even in the
case it will be eliminated, and in fact a number of cases here needed
adjustments to compile because of this.
