* mwarr.cpp refactoring
* mwarr.cpp refactoring
* stlforce refactor (nw)
* use suggested syntax, unless there's something to actually modify instead of outright replace?
* ok, no need to signal that we're modifying a device at all, just modify it (nw)
* move includes as requested (nw)
* do stuff modern way (nw)
* namco checkpoint (including cam900 submission)
* move code into device (nw)
* start splitting DSP support code into devices (nw)
* fix crash (nw)
* prepare for further splitting (nw)
* move code for C67 based DSP PCB into it's own device (nw)
* survive F3 resets without crashing or breaking the 3D (nw)
* less magic numbers (nw)
* optional -> required
don't use fake bootstrap on older type, suspend CPU instead
* restore CPU yield hack for solvalou (nw)
* (nw)
* give galaxian3 some DSPs (nw)
* address hap's concern with a different workaround since MAME is awkward (nw)
* split namco21 driver into 3 drivers as the different configurations really are entirely different boardsets with similar components, not a real 'system'
emulated entire PCB set for driveyes ( http://www.tvspels-nostalgi.com/Bilder/PCB/Namco/driverseye_cage_inside.jpg ) although how the PCBs communicate is not yet known (C139 maybe, which might also be an MCU)
* remove empty file (nw)
* actually thinking about it, this is cleaner (nw)
* mark cybsledj as World instead, there's nothing about this set other than the CY1 code to indicate that it's a Japanese set, and I don't think the Namco codes represent region, just release order.
* newline (nw)
* newline (nw)
A skeleton for the Microsoft Jazz architecture, which was implemented in the MIPS Magnum 4000, Olivetti M700-10 and was the base/origin of several other MIPS ARC systems.
* added skeleton Inmos G300/G332/G364 device
* added skeleton NatSemi DP83932C SONIC device
* added skeleton MCT-ADR device
Also add notes to Sun keyboard emulation.
There's a hack to make the 1200 Baud mouse actually run at 9600 Baud.
This is necessary because the SCC is incorrectly expecting 9600 Baud
rather than 1200 Baud. I don't have time to fix the SCC, so I'd
appreciate it if someone else would.
There's no way it should be expecting 9600 Baud on the mouse port.
Solaris 2.3 and later support 1200 Baud and 4800 Baud, and earlier
versions support 1200 Baud only. No version of Solaris works with a
9600 Baud mouse.
The workaround allows the mouse to be used in SunView on sun4_60 - I
haven't tested any other drivers.
* split namco c169 roz chip from namcos2 by making it a device (nw)
some reorganization still needed (eg move init stuff to config)
* push on this way, old non-device code was working by chance (nw)
* use std::fill instead of memset
* tidy (nw)
* split out the c355 sprites into a device too (nw)
* this isn't used (nw)
* also not used (nw)
* split out c123 tilemap chip
* modern here too (nw)
* namco system2 sprite chip is a device, move content of machine/namcoic.h to a text file in 'etc' as it's not really code at all, and the cpp file is no longer needed
* Namco System 2 ROZ is a device (so only gets created on games that have it, avoids a crash in old code in tilemap viewer)
* untangle namcofl from namcos2 now that things are devices
* untangle namconb1 from namcos2
* untangle gal3.cpp from namcos2
* untangle namcos2 and namcos21 - part 1 (ugly part)
* untangle system2 and system21, part 2
* use c68 for c68 based games in namcos21.cpp and some cleanup / notes / reorganization / default nvrams
* naming cleanups (nw)
* c123 - move init to device config
* c169 init -> device config
* c355 init -> device config
* new clones
Four Trax (Japan) [ShouTime, The Dumping Union]
note, one of the gfx roms in the MAME set has an 'fx2' label, it should be verified.
also replaced the ROMs for the fourtraxa set, the old ones had a 0x00 fill instead of a 0xff fill but were otherwise identical, it's a weird mod of the World set that hides most of the advertising banners, replacing them with generic ones, presumably for legal reasons?
- Add and identify some extra IOC firmware revisions (v1.3 from Bitsavers)
- More descriptive names for ROMs of latest IOC revision (from Bitsavers)
imds: Remove skeleton driver; ROMs preserved as v1.4 of imds2ioc
* Add huc6230 Emulation
huc6272.cpp : Add ADPCM transfer, Add save states
PC-FXGA for PC-9801 C Bus is released in December 1995 in Japan, Correct metadata
* huc6272.cpp : Fix ADPCM address
* huc6230.cpp : Simpler interpolate
* huc6230.cpp : Fix clamp
huc6272.cpp : Fix ADPCM nibble
* huc6272.cpp : Fix data type
* Revert pcfxga year; PC-FXGA for PC9801 C-bus is not dumped?
- split into separate sources
- fixed paste
- added uart and rs232
- added baud rate clock or brg depending on hardware
- fixed uart status on sys80
- fixed cassette waveform
- lots of tidy up
- Added FDC card.
- Cursor now generated by 6845.
New working machines
--------------------
Acorn System 3 (6502 CPU)
Acorn System 5
New working clones
------------------
Acorn System 2
Acorn System 4
* Added ps2timer device to encapsulate Playstation 2 timers.
* Temporarily hacked R5900 core to always have scratchpad RAM mapped at 0x70000000.
* Added reference counting to divtlb so that it does not unmap pages that are still shared with other entries.
* Added a considerable amount of logging to ps2sony.cpp.
-mips3: Added basic Emotion Engine support. [Ryan Holtz]
* Added S bit to TLB mapping.
* Added support for VSUB, VIADD, VSQI, VISWR, VOR, LQ, SQ, MFSA, MTSA, MFHI1, MFLO1, MULT1, DIV1, DIVU1, PEXTLW, PADDUW, PMFHI,
PMFLO, PCPYLD, PCPYUD, SQC2, LQC2 opcodes. [Ryan Holtz]
* Remove vram_rw and ctrl_rw wrapper functions
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: replace hardcoded display width by m_fb_width
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: prepare topcat for multi plane operation
framebuffer vram is only 1 bit wide.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* 98544: set single topcat plane
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add nereid mapper used on HP98543/98545 graphic cards
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* prepare for multi-topcat operation
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add HP 98543 4 plane graphics card
* hp9k_3xx: add hp98543 card
* topcat,nerid: disable VERBOSE
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp98543: use required_device_array
* 98543: use required_region_ptr
* 98544: use required_region_ptr
* topcat: add save state support
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: add save state support
* hp98544,hp98543,topcat: use shared memory space
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: remove redundant variable
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat, nereid: remove trailing underscore from include guard
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat,hp98543: code style fixes proposed in PR
Signed-off-by: Sven Schnelle <svens@stackframe.org>
- Implemented banking and system/user mode switching.
- Added PolyBASIC 3.0, 3.1, and 3.4.
New clones marked as NOT_WORKING
--------------------------------
Poly 1 Educational Computer (early) [Nigel Barnes, Andrew Trotman]
Poly 2 Learning System [Nigel Barnes, Andrew Trotman]
Poly Development System [Nigel Barnes, Andrew Trotman]
Merged with strnskil.cpp, with modernization and cleanups. (nw)
Add MCFG_SCREEN_RAW_PARAMS. (nw)
Added coin counters to markham, strnskil, banbam and clones.
* proposal: move z80daisy* to devices/machine
Seems to me this is a machine, not a CPU? Main reason was to stop the Z80 CPU from being dragged into systems that don't have one just because they use a Z80 family peripheral.
* missed this one (nw)
* missed a spot (nw)
* interpro: slotify mouse (nw)
Needed to make the mouse a slot device to enable it to be connected to graphics boards under development.
* add validity check (nw)
* bt45x: new devices
Basic implementation of various Brooktree RAMDAC devices. Two of these (bt457, bt458) are used by InterPro graphics boards currently under development, the others are unused/untested at this point.
* bt45x: tweak descriptions (nw)
