- crazyfgt, lastfght, all games in subsino2.cpp: Hook up DS2430A device, add handcrafted EEPROM data to satisfy serial protection checks and remove ROM patches that forced them to pass
- crazyfgt: Hook up coin counter
- queenbeei, queenbeesa, qbeebing, treamary: Add RTE-to-RTS ROM patches that were missing
- treamary: Change configuration to one that allows booting into title screen rather than getting stuck on initial tests
* machine/smartmed.cpp, machine/nandflash.cpp: Separated NAND Flash from smartmed.
* sound/spu.cpp: Calculate tables based on clock speed.
* machine/intelfsh.cpp: Added Intel 28F640J5 device.
* namco/namcos10.cpp: Refactored driver, and implemented MEM(M) and MEM(N) boards.
* namco/namcos10.cpp: Fixed parenting of Mr. Driller 2, and renamed Kono e Tako.
abc800_dsk: Split to interleaved and non-interleaved disk formats. [Curt Coder]
New working software list items
-------------------------------
abc838_flop: Systemskiva ABC800 v1.0 (Sweden), Systemskiva för UFD-DOS v6.3 (Sweden) [Curt Coder]
util/bitmap.cpp, util/palette.cpp: Marked lots of things constexpr.
Bitmaps don't throw exceptions on allocation failure, they just become
invalid. Almost nothing in MAME actually checks for this.
emu/profiler.cpp: Abort if the profile stack overflows rather than
throwing an exception. This is a developer feature and if it overflows,
the code is broken. Calling a noreturn noexcept function generates less
code than throwing an exception, which adds up.
util/strformat.cpp: Traded away some unnecessary flexibility for more
compact code. The stream objects must derive from std::basic_ostream
now - they can't just be any old objects with the expected operators.
------------------------------
Series 3a [Nigel Barnes, The Last Psion]
Series 3c [Nigel Barnes, The Last Psion]
Series 3mx [Nigel Barnes, The Last Psion]
Siena [Nigel Barnes, The Last Psion]
Workabout [Nigel Barnes, The Last Psion]
Workabout mx [Nigel Barnes, The Last Psion]
New clones marked not working
-----------------------------
Pocket Book II [Nigel Barnes, The Last Psion]
Series 3a (2M) [Nigel Barnes, The Last Psion]
Series 3a (2M) (German) [Nigel Barnes, The Last Psion]
* emu: add defer_access() method, which is useful for keeping the cpu in a loop restarting the current
instruction to emulate waitstates.
* add HP82321A Basic Language Coprocessor
This adds support for the HP82321A Basic language coprocessor, which emulates a HP9816 system with a 68K cpu. See http://www.hpmuseum.net/display_item.php?hw=681 for more details and software to run on this card.
* This lets you use emu.wait(...) directly without mucking around creating coroutines.
* Allow emu.wait to accept an attotime argument.
* Added a couple more wait helper functions.
-emu/profiler.h: Actually use scope-based profiling helpers.
* This makes the comment at the top of emu/profile.h less dishonest, and makes it easier to write exception-safe code.
* Got rid of some do { ... } while (0) loops that only existed so break could be used like a goto.
This removes the need to force it to build as C++, and adds proper UTF-8
support for Windows.
Since this is a fork of linenoise, there's no hope for getting
lua-linenoise to sync with it upstream. I made the bare minimum changes
to keep it working, but didn't add bindings for new functionality (e.g.
multi-line editing).
Compile Lua as C++. When Lua is compiled as C, it uses setjmp/longjmp
for error handling, resulting in failure to unwind intermediate stack
frames. Trying to ensure no objects with non-trivial destructors are in
scope when raising a Lua error is error-prone. In particular,
converting an exception to a Lua error becomes convoluted, and raising a
Lua error from a constructor is effectively impossible.
Updated Lua to 5.4.4 - this includes a brand-new garbage collector
implementation with better performance. The main thing removed is the
deprecated bitlib.
Updated sol2 to version 3.3.0 - this adds support for Lua 5.4 and fixes
a number of issues, including not correctly handling errors when Lua is
built as C++.
Updated LuaFileSystem to version 1.8.0 - this adds support for symbolic
links on Windows, as well as Lua 5.4 compatibility.
Updated LuaSQLite3 to version 0.9.5 - this fixes issues in
multi-threaded environments, as well as Lua 5.4 compatibility.
Fixed double-free after attempting to construct a debugger expression
from Lua with an invalid string, and exposed expression error to Lua in
a better way.
Added warning level print function to Lua.
Fixed saving cheats with shift operators in expressions, although this
code isn't actually used as there's no cheat editor.
* Removed SDL2 source.
* Updated gradle.
* Updated SDL2 Java support glue code.
* Increased minimum supported Android API version to 24.
* Updated required asset files for Android app.
* Added proper tag for Android logging.
* Added SDL2 hint to make BGFX work on Android.
* Added callbacks for card detect, battery voltage and write protect to the PCCard interface.
* Added helpers to read/write data swapped (similar to the existing support in the ATA device).
* Add support for 2 MB and 4 MB SRAM PCMCIA models from Centennial with built-in EEPROM storage for CIS information.
* machine/linflash.cpp: Updated the linear Flash PCMCIA card emulation to use the new card detection support.
* machine/gayle.cpp: Rewrote the Amiga Gayle emulation, adding support for PCMCIA.
* Fixed an issue with Amiga interrupts arriving at the wrong time.
osd/modules/input, emu/inpttype.cpp: Made most default joystick
assignments supplied by input modules. Input modules take available
controls into consideration when generating default assignments.
emu/inpttype.ipp: Added a separate "Back" UI input separate from Cancel.
You may want an easier to hit combination for moving to the previous
menu than for exiting or cancelling input. They both default to Escape.
emu/inpttype.ipp: Added a UI Help control. Currently only used by
analog inputs menu
emu/inpttype.h: Moved I/O port field type enum to its own header and
sorted UI controls so they appear in a more logical order.
ui: Don't use UI Select to restore defaults - people should be getting
used to the UI Clear input by now. UI Select cycles multi-value items
instead.
ui/inputmap.cpp: Don't use immediate cancel to cycle between clearing
and restoring default assignment (use UI Clear instead).
osd: Reduced the number of files needing to include the dreaded emu.h.
Got some implementation out of headers.
mpc106.cpp: fixed endianness of register access, hooked up RAM, made compatible with RAM device. [R. Belmont]
cuda.cpp: Added I2C I/O hookups. [R. Belmont]
heathrow.cpp: Hack for unknown register that imac was stuck on. [R. Belmont]
dimm_spd.cpp: New device that provides a configurable DIMM serial presence detect readback for I2C or SMBus. [R. Belmont]
* Got rid of a few more unnecessary uses of simple_list.
* bus/amiga/zorro: Got rid of a pointer member that would make adding
save state support unnecessarily difficult.
* nichibutsu/cop01.cpp: Remove need to remove devices from machine
config.
* Moved common instruction field accessors used by the CPU core and
disassembler to a shared base class and made them constexpr.
* Got the inline member functions bodies file out of the public CPU
header so they aren't pulled in by everything using it.
* Got most of the disassembler handler declarations out of the public
header so they can be changed withut excessive recompiling.
* Split into files by opcode encode type/group.
* Refactored out macros.
* Added additional opcodes.
* Added interrupt logic.
* Added stub handlers for used but unknown opcodes.
-leapfrog/leapster.cpp updates:
* Put some data uploaded by the leapster BIOS somewhere for debugging purposes.
* Removed a read handler that was only there because of previous bad handling.
* Noted some used Leapster side addresses.
emu/input.cpp: Fixed regression in display of some joystick inputs.
osd/interface: Split up interface classes into a few more files to
reduce where the input device interface class needs to be included.
Made OSD independent of concrete input_device class.
osd/modules/input, emu/inputdev.cpp, emu/ioport.cpp: Allow input devices
to provide tokens for controls without standard item types and
additional default input assignments. Fixes issues assigning Yen and
Backslash on Japanese keyboards.
ui/textbox.cpp: Added a fixed-content text box menu class for future
use.
Got main.h out of emu.h as it’s only used in a very small number of
places, mostly for getting the application name. Added eminline.h to
attotime.h as it's used without emu.h. Cleaned up forward declarations
in emufwd.h a little.
Don't ignore the return status of OSD module initialisation. Attempt to
fall back to an alternate module if the selected module fails to
initialise. Log more useful diagnostic information at verbose level.
Fixed BGFX crash on exit after toggling fullscreen. Also persist more
settings than just the selected chains across toggling fullscreen.
Turned video modules into OSD modules in the same sense as all the other
OSD modules. They now use the same selection/fallback mechanism as all
the other modules without special extra code in the OSD implementations.
Untangled some object ownership mess. Windows own renderers, OSD
objects own windows. Fixed a refrence loop that caused the first window
object to always leak.
Don't create renderer object until after underlying window has been
created. Fixed issues with order of creation/destruction when toggling
fullscreen or changing prescale in fullscreen with -switchres in SDL
builds.
Use more smart pointers in BGFX and Direct3D render modules. Most of
the code now reutrns a smart pointer when handing over ownership or a
naked pointer when retaining ownership. Fixed a few leaks and
simplified cleanup code.
Encapsulated various OSD modules better.
osd: Supply OSD object to modules on initialisation. Encapsulated some
event handling in the OSD objects rather than leaving it in free
functions. Put various stuff in namespaces.
osd/modules/input: Enabled dinput, xinput and winhybrid modules for
Windows SDL builds, and enabled background input for dinput and xinput
(and by extension winhybrid) modules. Also fixed some COM and X11
resource leaks.
osd/modules/input/input_sdl.cpp: Flipped SDL mouse button order to match
Windows, and exposed vertical and horizontal scroll as Z and rZ axes.
Moved SDL UI event handling out of input devices into OSD object.
osd/modules/input_rawinput.cpp: Changed lightgun Z axis token so it's
correctly identified as a relative axis (it maps to the scroll wheel
equivalent).
osd: Added an option to choose the network provider module. Mostly
useful if you build with both TUN/TAP and pcap support included, or if
you want to disable emulated networking completely.
emu/input.cpp: Use a better strategy for assembling input code names
that uses fewer temporary strings and doesn't require use of the
non-Unicode-aware space trimming function (fixes MT08552).
osd/modules/input_dinput.cpp: Improved polling logic.
osd: Made various parts of the input code less dependent on concrete emu
objects, and reduced inappropriately passing around the machine object.
Made input modules less dependent on OSD implementation. Encapsulated
some stuff and got rid of some vestigial newui and SDL1 support code.
Cleaned up some interfaces. Moved OSD options classes to their own
files.
Prepare to remove main.h from emu.h - it's mostly used to get the
application name, which the vast majority of emulated devices don't need
to do.
ui/analogipt.cpp: Fixed bar graph display for fields with ranges
that wrap through zero.
emu/inputdev.cpp: Separateed analog axis deadzone and switch threshold
settings, reduced default deadzone, and fixed a potential division by
zero if the deadzone and saturation settings are equal.
emu/ioport.cpp: Fixed behaviour of absolute analog fields where range
passes through zero - it previously only worked for specific
combinations of mask, minimum and default. Removed a workaround from
universal/getaway.cpp that is no longer necessary.
emu/input.cpp: Fixed unintuitive behaviour when an absolute field is
assigned an OR combination of a relative control folled by an absolute
control (e.g. Mouse X or Joy 1 LSX). Also fixed reading axis input
sequences where an axis code is followed by a switch code (these can
only be produced by manually editing configuration files, not through
MAME's UI), and fixed the returned type when multiple relative axes sum
to zero.
osd/modules/input_dinput.cpp: Fixed hat switches being stuck in up
position when input is suspended in the background
taito/taitoio_yoke.cpp: Give throttle control a distinct type, and don't
auto-centre.
osd: Added option to select MIDI provider module (currently only
PortMidi and the dummy module are available). Also put various things
in namespaces, and fixed builds including SDL sound module with native
Windows OSD.
emu/validity.cpp: Added check to catch I/O port fields using UI input
types.
emu/inpttype.ipp: Renamed inputs that were causing confusion. "Bill"
and "Track" were causing confusion for translators and hence likely
causing confusion for many users, especially those who are not native
English speakers. "Track" as an abbreviation for "Trackball" was
frequently being mistranslated, e.g. in the sense of a CD track
selection button or even in the sense of a railway track. There's no
reason to abbreviate it. "Bill" in the US English sense as a banknote
is too ambiguous and was causing confusion for translators. It's better
to use the less ambiguous "Banknote". Corrected Greek translations of
"Trackball".
Don't run GitHub Actions on issue template changes.
* machine/ncr53c90.cpp: Renamed to ncr53c90 to avoid confusion about the actual NCR part name.
* machine/ncr53c90.cpp: Fixed 'Select w/ ATN and Stop' command in DMA mode.
* cpu/sparc: Avoid using temporary C-strings as address space names.
* machine/sun4c_mmu.cpp: Fixed l2p debugger command by removing inadvertent narrowing conversion.
* sun/sun4.cpp: Switched to NCR 53C90 from 53C90A, and fixed DMA byte-address masking - fixes Solaris 2.4 booting.
Added support for various disk formats used with HP computers. Named
'hp300', but also contains formats used with HP85 and HP150 computers,
using the same floppy drivers as the 300 series.
Most of the information was taken from "HP Flexible Disk Formats" by
Martin Hepperle.
HP LIF was used in quite a lot of different HP products like the
HP 9000/300, HP85/87 and HP150 computers. Added support for
reading this filesystem.
* bus/hp9845_io: Added HP9871 printer.
New working machines
------------------
Hewlett-Packard HP 9825A
Hewlett-Packard HP 9831A
New working software list items
------------------
hp9825_rom: 9862 Plotter/Gen I/O ROM for 9825
hp9825_rom: General/extended I/O ROM for 9825
hp9825_rom: General/extended I/O/9862 plotter ROM for 9825
hp9825_rom: General/extended I/O/plotter ROM for 9825
hp9825_rom: Plotter/Gen I/O ROM for 9825
hp9825_rom: String/Advanced programming ROM for 9825
hp9831_rom: Mass storage ROM for 9831
New not working software list items
------------------
hp9831_rom: Matrix/plotter ROM for 9831
This is the "horsehoe crab" game pad version of the Denpa Micom Soft
Analog/Digital Intelligent Controller System (the other version is the
desktop "cyber stick").
Mega Drive games only support this controller in analog mode (the
default). Digital mode is designed to be used for games on computers
with MSX-style controller ports that don't support analog controls.
* machine/mc68328.cpp: Split MC68328 device into a base class with shared functionality, and derived MC68328 and MC68EZ328 models.
* video/sed1375.cpp: Added roughly-functional implementation of the Epson SED1375 LCD controller.
Machines promoted to working
------------------------
3Com Palm IIIc [Ryan Holtz]
Use a memory view to switching between Game Gear and Master System compatibility I/O space mapping. Got rid of most of the conditional code checking whether it's a Game Gear driver.
Got rid of the special Game Gear EXT port slot. It's the same thing as a Mega Drive controller/expansion I/O port with a different connector.
sega/mdioport.cpp: Added a variant for the Game Gear with the TH/PC6 interrupt latch, and added it to the Game Gear.
-cpu/avr8: Added minimal ADC support (in particular, ADC interrupts are
not implemented).
-sega/megadriv.cpp: Further broke up base Mega Drive class.
* Created a light-weight base class with just the core functionality,
used for "Genie" hardware (Puckman Pockimon).
* Moved built-in controller emulation to a derived class so it isn't
lurking underneath the consoles with pluggable controllers.
* Moved the Sun Mixing Mega Drive bootlegs to their own source file -
they're substantially different, not using the I/O blocks for input.
-sega/sms.cpp: Untangled SG-1000 Mark III slightly.
- Added cards ETI Real Time Clock, ETI Sound Card, Microtanic Real Time Clock, TUG Combo Card, and TUG EPROM Storage Card.
mt6809: Fixed keyboard input, RALBUG commands now work, and promoted to working.
- Added support for FLEX and BBC Micro floppy formats.
spinveti: Replaced incorrect ROM to load at &F800.
Adapted all Mega Drive hardware drivers to work with the new I/O port
device, and moved based Mega Drive 68k peripherals to a common address
map function.
sega/megadriv_acbl.cpp: Added base machine configuration to attach an
optional I/O port to the EXP port, and moved some stuff to derived
classes.
sega/megadriv_rad.cpp: Simplified code.
bus/sms_ctrl: Added an RS-232 adapter. Only sending from the console to
the attached device works so far, reception will have to wait.
- Make CC 90-232 serial/parallel interface an extension device
- Eliminate spurious custom Centronics interface from MO5NR (CC 90-232 is used with this model instead)
- Make RF 57-932 serial interface an extension device
- Make MD 90-120 modem interface an extension device (emulation still needs work)
- Make Midipak an extension device and completely rewrite emulation
- Make MEA8000-based speech interface an extension device
- Configure 1 MHz E clock for extension bus
- Add FIRQ & IRQ outputs from extension bus
- Expand extension I/O address range from $x7D0-$x7DF to $x7C0-$x7FF
- Clean up various bits of driver code
Rationalised interface, got rid of TH from the "pulled" lines, and
extended to support output on all data lines. Renamed to be less
specific as the same interface is shared by multiple consoles.
Removed a lot of unnecessary indirection through I/O ports and multiple
levels of inversion in peripheral emulation that was obfuscating the
code.
Made Rapid Fire Unit switches toggles so they can be assigned to
controller buttons and switched on/off easily during gameplay. You can
still see/change the current state in the Toggle Inputs menu if you
don't want to assign buttons.
Implemented idle timeout in Furrtek 4-player Master System adapter.
Improved crosshair tracking in Graphic Board, added ability to
raise/lower pen, and greatly cleaned up code.
Fixed paddle controller when used with export consoles.
Added 3-button and 6-button Mega Drive control devices.
sega/sms.cpp: SG-1000 Mark III has pin 7 of controller ports tied low -
indicate this to attached controllers (this pin became TH on the Master
System).
sega/mdconsole.cpp: Replaced controller emulation in the driver with
Sega controller ports. Also removed some vestigial code from the driver
base class.
sharp/x68k.cpp: Replaced controller emulation in the driver with MSX
controller ports.
bus/msx/ctrl: Added a Sega controller adapter device, supported by
X68000 software including chelnov and ssf2.
*bus/coco: Remove real-time clock and no-halt functions from Radio Shack floppy disk controller.
* bus/coco: Added Disto Super Controller II floppy disk controller that contains no-halt functionality
* bus/coco: Added "mini expansion bus" that the SCII uses for add on cards, and added slots to SCII and Disto RAM cartridges.
* bus/coco: Added Disto "Realtime Clock" MEB slot device (also includes a parallel printer interface).
* Copied or moved Bee Cards entries from msx1_cart.xml to msx1_bee_card.xml.
* Copied or moved SoftCard entries from msx1_cart.xml to msx_softcard.xml.
* Qt: Save expression for memory and disassembly views.
* Qt: Made command history behave more like Cocoa.
* Qt: Added expression history and made behaviour more like Cocoa.
* Qt: Refactored global notifications to use signals.
* Win32: Increased command/expression history size to 100 items.
* Cocoa: Save state of device info viewer windows.
* Qt/Win32/Cocoa: Save command/expression history.
-util/xmlfile.cpp: Fixed bug where copyInto failed to copy nodes.
gameboy.xml: Changed default NVRAM fill for dbzgeki to 0xff - this will
cause it to treat the three save files as empty rather than starting in
a glitchy state.
New working software list items
-------------------------------
Dragon Ball Z English [lana_chan_, taizou]
* Made some devices which were not present in all msx models optional; install software lists based on components of the system.
* Updated hardware descriptions.
* Implemented bruc100 firmware banking.
* Added m5.00.011 version of Yamaha SFG05 cartridge.
* Fixed phc28 RAM misconfiguration.
* Added AX-230 internal games mapper.
* Started adding support for FS-A1FM modem.
* Updated input port definitions.
* Added support for kanji font from raw FS-A1FX ROM dump.
* Started adding support for RS-232.
* Added support for Toshiba HX-M200 kanji cartridge - allows hx21 and hx22 to start their firmware.
* Fixed most floppy problems.
* Marked all ROMs that need verification as bad dumps.
* Moved floppy controller and drive configuration from main state to msx_slot disk devices.
New working machines
---------------------------------------
Hitachi MB-H1 (MSX1, Japan)
Mitsubishi ML-8000 (MSX1, Japan)
Panasonic CF-2700 (MSX1, UK)
Pioneer", "UC-V102 (MSX2, Japan)
Sakhr AX-200 (MSX1, Arabic/English)
Sakhr AX-230 (MSX1, Arabic)
Sakhr AX-350 II (MSX2, Arabic)
Sakhr AX-500 (MSX2, Arabic)
Sanyo MPC-25FS (MSX2, Japan)
Sanyo PHC-23 / Wavy23 (MSX2, Japan)
Toshiba HX-32 (MSX1, Japan)
Toshiba HX-51I (MSX1, Italy, Spain)
Yamaha SX-100 (MSX1, Japan)
Victor HC-80 (MSX2, Japan)
New working clones
---------------------------------------
Frael Bruc 100-2 (MSX1, Italy)
Hitachi MB-H1E (MSX1, Japan)
Philips NMS 8250/16 (MSX2, Spain)
Sakhr AX-200M (MSX1, Arabic/English)
Sakhr AX-350 II F (MSX2, Arabic)
Sony HB-101 (MSX1, Japan)
Sony HB-75 (MSX1, Japan)
Sony HB-F500 2nd version (MSX2, Japan)
Spectravideo SVI-728 (MSX1, Spanish)
Talent DPC-200 (MSX1, Argentina, international keyboard)
Toshiba HX-20E (MSX1, Spain)
* qx10: Rework keyboard code
* Split keyboard into ascii and hasci variants
* Update keymappings to be more complete
* Add output_finders for keyboard LEDs
* Keyboard now uses sync serial, fixes timing issues with CP/M Plus
* qx10: Add layouts for both hasci and ascii keyboards
* fs_isis: support for Intel ISIS-II filesystem added
* fs_isis: fix after CI failure
* fs_isis: adapted to changes in 5499683a23
* all.cpp: fixed amount of ws
Made closing the Qt debugger console window hide all debugger windows
and run the emulated machine (debugger windows will be shown on next
user break or breakpoint hit). This matches the behaviour of the Win32
and Cocoa debuggers.
Made Qt debugger clean up its windows on exit rather than on subsequent
starts. This fixes GitHub #9789.
Made Qt debugger less reliant on global variables, and made code to save
and load configuration a bit less convoluted. It still needs more
refactoring on this front, but it's in slightly better shape now.
Made Qt debugger a bit less crashy on invalid configuration. Still
plenty of ways to crash it, but every little bit counts.
Made Qt debugger do less comparisons on menu item names and object
names - it might be possible to localise one day.
Moved all the C++ debugger implementations into namespaces. They're
using awfully generic class names, so it's about time.
* Reset the system from a timer callback for the Vast Fame/SL/J.Y.
Company multi-game cartridges. This fixes games on gbcolor.
* Reset system when leaving configuration mode for GBCK003. Fixes most
issues with games.
* Moved GBCK003 to its own source file, and added notes for both
multi-game cartridge types.
Cartridge RAM features are not implemented yet.
New working software list items
---------------------
gbcolor.xml: New Super Color 145 in 1 (China) [taizou, Vas Crabb]
* Format is mostly compatible with the Cocoa debugger, besides reversed
vertical positioning.
* Made Qt debugger more compatible with configuration format used by
Win32 and Cocoa debuggers.
* emu/config.cpp: Preserve elements with no registered handlers in
default and system configuation files.
* Fixed tiny build for consolidated driver files.
* tools/unidasm.cpp: Capture big objects by reference in lambdas.
* misc/oneshot.cpp: Fixed unsigned comparison to zero bugs.
Allow cartridges to install themselves rather than putting accesses
through trampolines. Use memory banks even when they aren't installed
directly, as it exposes script bindings and declares intent.
Added support for MBC6 Flash, and MBC7 two-axis accelerometer and 128*16
or 256*16 serial EEPROM. Added basic support for Game Boy Camera image
capture (various M64282FP processing features are not implemented).
Improved MBC3 real-time clock emulation.
Added basic support for Hudson Soft HuC-1 cartridges (infrared I/O not
supported) and HuC-3 cartridges (real-time clock and infrared I/O not
supported).
Added full support for Vast Fame VF001 cartridges.
Separated Mega Duck flat and banked ROM cartridge types, and allowed
software list items to specify whether a cartridge has fixed and
selectable 16K banks or a single selectable 32K bank.
Added support for RAM sizes smaller than 8K that will be mirrored in the
0xA000-0xBFFF area. Implemented correct ROM mapping for sizes that are
not powers of two. Corrected size of MBC2 internal static RAM.
Added support for various hypothetical cartridge wirings, such as MBC5
with outer ROM banking for up to 128M, M161 and Wisdom Tree cartridges
with flat RAM, and MBC1 or MBC5 with fewer than the maximum number of
inner ROM bank lines used.
Fixed logo spoofing logic for many pirate cartridges, including Rocket
Games, Sachen MMC1 and MMC2, Sintax, Li Cheng, and Niutoude. Identified
fine bank mask register for GBCK003 board.
Added basic support for GBX format ROM images. Added heuristic for
detecting raw dumps of M161 cartridge images. Removed unreliable
unlicensed cartridge detection heuristics - these need to be
reimplemented in a better way.
Software list items promoted to working
---------------------------------------
gameboy.xml:
Game Boy Camera (Europe, USA)
Game Boy Camera Gold (USA)
Pocket Camera (Japan, Rev 1)
gbcolor.xml:
Command Master (Japan)
Kirby Tilt 'n' Tumble (USA)
Korokoro Kirby (Japan)
Street Hero (Taiwan)
Thunder Blast Man (Europe)
4 in 1 + 8 in 1 (World, 4B-001)
4 in 1 + 8 in 1 (World, 4B-002)
4 in 1 + 8 in 1 + 16 in 1 (World, 4B-005)
4 in 1 + 8 in 1 (World, 4B-007)
31 in 1 Mighty Mix (Taiwan)
31-in-1 Mighty Mix (Australia)
Nǚwáng Gédòu 2000 (Taiwan)
Chāojí Gédòu 2001 Alpha (Taiwan)
Gédòu Jiàn Shén - Soul Falchion (Taiwan)
