- Completed normal Inputs/Outputs.
- Added button-lamps calculation.
- Created button-lamps layout.
- Documented the PCB RAM.
- Fixed NVRAM size based on PCB picture (2x CY62256L-70PC near the battery).
- Added notes about the method to make appear the real poker cards.
- Fixed the OKI 6295 frequency (1000 kHz resonator near). Now the game has more decent sounds.
- Corrected CPU clock to 12 MHz. (main Xtal).
Sent: Tuesday, December 09, 2008 8:13 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Add device parameter to stream_create()
Hi mamedev,
This patch adds the sound device to the parameters passed to
stream_create so that the global Machine can be removed from
streams.c. It assumes my previous patch which added CUSTOM_START and
SAMPLES_START has been applied.
~aa
Sent: Monday, December 08, 2008 10:05 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] More Machine cleanups
Hi mamdev,
This patch picks up where my last patch left off, and tries to fix the
widely used konamiic/taitoic/deco16ic/segaic16 video cores to no
longer reference Machine. Basically plumbing through screen or
machine as appropriate in lots of drivers.
Note: The taito_l change fixes a dumb typo in taito_chardef14_m in my
last patch that I would have caught with a proper header file, which
I've now added.
~aa
Sent: Monday, December 08, 2008 6:21 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Pointerify f8/tlcs90 cores
Hi mamedev,
Two more cores converted to pointers. f8 was very straightforward,
tlcs90 had some extra state that needed to be merged into the register
struct, and needed adjustments to its timers and read/write handlers
which might warrant some scrutiny by the experts.
~aa
from the CPU cores.
Disabled the use of PULSE_LINE for any input lines except NMI and RESET.
Added a helper function generic_pulse_irq_line() for doing a single-cycle
assert/deassert for those few drivers remaining that were trying to use
PULSE_LINE directly.
debugger. In order to get the OSD to update, a new function
debug_view_flush_updates() must be called. Currently this is automatically
called before osd_wait_for_debugger(), and during the periodic updates while
executing. The OSD code may occasionally need to call it under other
circumstances (for example, the Windows code calls it explicitly while
tracking scrollbar thumbs to get live scrolling).
This is a reworked/expanded version of the patch I sent yesterday.
This one is split into three parts:
1. This introduces function macros for SAMPLES_START,
CUSTOM_{START,STOP,RESET}, and ANTIC_RENDERER.
2. This introduces running_machine *machine throughout MAME.
Principally it adds running_machine *machine = Machine to the top of
functions, but in some static functions the parameter is added
directly. Some similar changes in 99xxcore.h, v9938.c, v9938mod.c,
galaxold.c, psx.c, taito_l.c are also made to eliminate Machine
params. No global API is changed.
3. This changes the APIs introduced in the first part to pass device
or space as appropriate. A few similar changes in some other global
apis are made as well.
The net result of this sequence of patches is to remove 40% of the
Machine references and 27 deprecat.h includes.
~aa
Sent: Sunday, December 07, 2008 1:48 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Pointerify sharc core
Hi mamedev,
The attached patch pointerifies the sharc core. If this has already
been done, no great loss, it only took about an hour and a half to do
this.
~aa
Sent: Sunday, December 07, 2008 9:43 AM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Introduce KONAMI_SETLINES_CALLBACK
Hi mamedev,
Aaron indicated the KONAMI_SETLINES_CALLBACK change from my previous
patch overlapped with work already committed but was otherwise a
desired change, so this patch submits just that change relative to the
committed work.
~aa
Sent: Saturday, December 06, 2008 4:52 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Deprecat.h cleanup
Hi mamedev,
This patch changes some global Machine references to use machine,
device->machine, ... instead, and removes any unneeded #include
"deprecat.h" lines as well (about 10% of them in fact). It was
generated using the attached script, and then reverting some cases
where it was overzealous.
~aa
config, and the devices attached to it are enumerated there.
Eventually, the PCI config read/write functions should be moved
to well-known functions within the device, but for now they are
kept separate.
activecpu -= 138
pass a device. Updated and de-deprecat-ed the drivers that used
it. Fixed interrupt handling to follow more recent behavior
expectations (no PULSE_LINE on non-NMI lines).
(Used cpustate naming convention. Moved iCount into state struct.)
(Tested with arkanoid, bootleg bubble bobble, etc.)
(Next cpu I'll look at is the ARM.)
seems to be based on the cottong bootleg already supported, it was on
citylan as a 'blister' dump, program roms only, works best with the
other roms from cottong and the program is closest to that.
[David Haywood]
New games added or promoted from NOT_WORKING status
---------------------------------------------------
Millenium Nuovo 4000 [David Haywood,Angelo Salese]
New games marked as GAME_NOT_WORKING
------------------------------------
Il Pagliaccio [David Haywood,Angelo Salese]
* select correct memory region by default when created
(should be first address space of visible CPU)
* when created, default bytes/chunk is correct
* when changing width, cursor no longer moves around
* memory regions display more than all 0xff now
Also fixed:
* qword big-endian memory reads no longer call little-endian handlers
* memory regions are tracked in creation order (show up in order
in the menu now)
* ROMREGION_DISPOSE memory regions are not disposed if the debugger
is enabled
appropriate, and to keep all global variables hanging off the
machine structure. Once again, this means all state registration
call sites have been touched:
- state_save_register_global* now takes a machine parameter
- state_save_register_item* now takes a machine parameter
- added new state_save_register_device_item* which now uses
the device name and tag to generate the base name
Extended the fake sound devices to have more populated fields.
Modified sound cores to use tags from the devices and simplified
the start function.
Renumbered CPU and sound get/set info constants to align with
the device constants, and shared values where they were perfectly
aligned.
Set the type field in the fake device_configs for CPU and sound
chips to a get_info stub which calls through to the CPU and sound
specific get_info functions. This means the device_get_info()
functions work for CPU and sound cores, even in their fake state.
Changed device information getters from device_info() to
device_get_info() to match the CPU and sound macros.
Sent: Wednesday, December 03, 2008 4:46 PM
To: submit@mamedev.org
Subject: bug 894 fix
Fixes bug 894, elecyoyo: inserted coins and pressing start sometimes leads back to the test menu
--
From: Luigi30
Sent: Tuesday, December 02, 2008 10:19 PM
To: submit@mamedev.org
Subject: Bug 2693 fix
Fixes bug 2693
Sent: Tuesday, December 02, 2008 10:14 AM
To: Aaron Giles
Subject: Another 8080/85 change from me
Hi Aaron,
I have noticed that there are some problems in interrupt handling in 8080 implementation. Thing is that there are some cases that made a problem while implementing one
computer emulation. Thing is that there is same computer with Z80 and 8080 cpu and ROM's are same, but interrupts were not triggered. So I have searched and found
two problems fixed with this patch.
1. previous implementation cleared interrupt enable bit on interrupt trigger which is wrong since interrupts should stay enabled
2. serve interrupt number was not cleared after interrupt is executed, so if same one is triggered it will not be catched.
I have tested with 8080 MESS drivers, and picked some of MAME drivers using 8080 and 8085, and there were no bad things found.
Regards,
Micko
recent cpu core changes. Specifically, it adds a fake device
implementation similar to the one the cpu cores were using in 128u3
(i.e. it only provides the machine pointer and the token), and makes
some interface adjustments aligned to 128u4 (i.e. adding
snd_class_header, adding get_ to various getter functions). The
primary benefit of this change is the removal of "deprecat.h" from 23
sound cores. I also adjusted ui.c to stop calling sndnum_clock and
access the clock data similarly to how it does the cpu clock data.
[AtariAce]
Sent: Friday, November 28, 2008 10:10 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] Fix 02689: jumpbug: Jumpbug won't start second time around
Hi mamedev,
Some global state needs to be zeroed to fix this mametesters bug.
~aa
02683: Pressing F5 while running debugger causes access violation
02669: pandoras: music tempo is too fast
02691: Some drivers with z80/ay8910 Audio: Audio tempo has changed
Also fixed debugger memory leak.
Added a number of new cputag_* macros to cpuexec.h.
To fix this, I had to break old INP files. While I was in there,
I added corefile support for compressing/decompressing data on
the fly, and enabled it for INPs, meaning the newer format INPs
are output and processed compressed.
Added the concept of 'subviews' to the debugger views. The core
now creates a list of possible subviews, and the OSD can select
between them. This removes code from the OSD that was previously
required to find all possible memory and disassembly views.
Added machine parameters to debugger console output functions.
Fixed some oddities in the memory view.
Moved globals to hang off of the machine structure.
Fixed bug where the visiblecpu was not updated immediately upon
a break.
Important note for OSD ports: the get/set property functions have
been retired for debug_views. Instead, there are specific functions
to perform each get/set operation. In addition, the format of the
update callback has changed to pass the osd private data in, and
the update callback/osd private data must be passed in at view
allocation time. And osd_wait_for_debugger() now gets a CPU object
instead of the machine.
Removed extra debugger tracking for address spaces and added some
of the useful data to the address_space structure. Updated all
debugger commands and views to use CPU and address space objects
where appropriate.
Added new memory functions for converting between bytes and
addresses, and for performing translations for a given address
space. Removed debugger macros that did similar things in favor
of calling these functions.
Rewrote most of the memory view handling. Disasm and register views
still need some additional tweaking.
- Fixed a crashing bug with Bra$il;
- Added "New Magic Card" to the Bra$il driver,working without sound;
- Added "Fashion",an earlier revision of Bra$il.Not yet working;
New games added or promoted from NOT_WORKING status
---------------------------------------------------
New Magic Card [David Haywood,Angelo Salese]
New games marked as GAME_NOT_WORKING
------------------------------------
Bra$il [David Haywood,Angelo Salese]
It should also be noted that many games using this chip are clipping at the moment. This is something that might date back to when sound mixing was upgraded to 32-bit. It is sensible for the 6295 emulator to output at this level because it ensures that bits of precision are not lost, so the mixing levels in the drivers should be adjusted to avoid clipping.
- Decripted saloon's program, graphics and color PROM.
- Created a new memory map and machine driver for saloon.
- Removed set jolycdae (it's not coming from a real board).
- Renamed the sets magiccrd, magiccda and magiccdb, to magicrd2, magicd2a and magicd2b.
- Updated technical notes.
- Changed the driver name to goldnpkr.c (Golden Poker is the most representative hardware).
- Splitted the PIA interfases to cover witchcrd/pottenpkr connections.
- Fixed the witchcrd/pottnpkr/sloco93 double up mode.
- Replaced the pottenpkr layout with goldnpkr one in all Jack Potten's Poker sets.
- Updated game notes for Witch Card and Super Loco 93 sets.
- Fixed al inputs & lamps to allow double up mode to the above games.
- Added Witch Card (Video Klein) but still not working.
- Added several Buena Suerte! sets.
- Added new games: Maverik, Brasil 89 & Poker'91.
- Reworked the sets parent-clone relationship (still in progress).
New games added or promoted from NOT_WORKING status
---------------------------------------------------
Maverik [Roberto Fresca]
Brasil 89 [Roberto Fresca]
Poker'91 [Roberto Fresca]
New clones added
----------------
Buena Suerte (21 new sets) [Roberto Fresca]
Royalea [Roberto Fresca]
New games marked as GAME_NOT_WORKING
------------------------------------
Witch Card (Video Klein) [Roberto Fresca, Guru]
* Fixed a bug with irq timings;
* Added ODD bit emulation;
* Fixed vblank period timings;
* Optimized a bit the whole interrupt routines,getting a 4x speed gain;
* Fixed an irq mask handling bug;
(This fixes at least Astra SuperStars and Pebble Beach booting,but the latter still fails the timer 1 irq routines...I need to check why)
We can't test these, I gave Robbie a final deadline on them a long time ago now.
If you're the one who dumps something and put the rest of the team in a situation where the submission can't be tested, then don't expect the driver to stay. Numerous chances have been given.
Unacceptable due to inability to test.
I won't be writing this driver, it fits somewhere between System21 and System22, with multiple PCBs etc. I just created this to document what we know so far. Chances are Phil or somebody with good Namco knowledge will have to emulate it.
Removed ATTOTIME_TO_CYCLES() and ATTOTIME_IN_CYCLES(). Replaced them
with functions in cpuexec: cpu_clocks_to_attotime() and
cpu_attotime_to_clocks(), both of which take CPU devices instead of
indexes. Updated all callers, many of which were using the functions
dubiously.
(a.k.a. the Gerald dump which was assuming to be an original deco HW...it's missing
the "Pro" and the deco logo at the title screen so I'm assuming it's a bootleg).
New games added or promoted from NOT_WORKING status
---------------------------------------------------
Tennis (bootleg of Pro Tennis) [Angelo Salese]
New games marked as GAME_NOT_WORKING
------------------------------------
Treasure Island [Angelo Salese]
It doesn't work because I highly suspect that there's an unhandled encryption scheme in it (patch on driver of a bogus opcode +
it crashes after that you play it once + (possibly) wrong video registers handlers).
Sent: Sunday, November 23, 2008 12:17 AM
To: submit@mamedev.org
Subject: Oki MSM6258 ADPCM core
Hi,
I have attached the Oki MSM6258 ADPCM sound core, which is intended for
use with the MESS Sharp X68000 driver. This code was written by Phil
Bennett, so he ought to be the one getting the credit for it. I have
mostly worked on the MESS X68000 driver and HD63450 (DMA controller)
code to get the ADPCM working for most X68000 software. I am unaware as
to if Phil has already submitted this or not yet.
I've tested compiling and running MAME itself (including a debug build)
with the MSM6258 core in it, and experienced no issues. Although there
is nothing in MAME to test it specifically with, it doesn't cause any
problems with MAME use in general.
The current MESS X68000 driver code with the MSM6258 enabled is
available for those that want to test that out -
http://mahlemiut.marpirc.net/msm6258-211108.zip
Thanks,
Barry Rodewald
mailto:bsr@xnet.co.nz
Sent: Friday, November 14, 2008 7:22 PM
To: submit@mamedev.org
Subject: flyball.c diff
Changed flyball CPU clock to a #defined crystal
Added dip locations
This more accurately describes the aux board behavior for Ms. Pac-Man. There
is a thorough description of how the board works. mspacman is a more faithful
emulation. In particular you can now enter service mode (F2) at anytime during
game play.
new clones
----------
Soldam (World?) [Gerald]
-------
please check sizes of roms 8 and 10, they're half the size of the japan set, but the content of the 1st half matches.
works. Added callback parameters to the expression engine. Improved
CPU parsing so you can use a CPU tag or index in most commands that
take one. Switched to passing CPU and address space objects around
where appropriate. Lots of other minor tweaks.
Moved memory global state into a struct hanging off of the machine.
Updated almost all memory APIs to take an address_space * where
appropriate, and updated all callers. Changed memory internals to
use address spaces where appropriate. Changed accessors to point
to the memory_* functions instead of the address space-specific
functions. Improved internal handling of watchpoints.
Added cputag_* functions: cputag_reset(), cputag_get_index(),
cputag_get_address_space(). These just expand via macros to an
initial fetch of the CPU via cputag_get_cpu() followed by the
standard CPU call.
Added debugger_interrupt_hook() and debugger_exception_hook() calls
which intelligently look at the debugger flags before calling.
Did minimal cleanup of debugger, mainly moving CPU-specific data
to hang off of the CPU classdata for more direct access.
return a boolean indicating whether the given address was successfully
located in a bank. Change raw/decrypted access to look at this result, and
if the given address is not in a bank, calls through to the standard read
handlers.
In theory, this should prevent crashes when accessing opcodes. It does in
fact prevent mp_col3 from crashing.
Fixed address space mapping handlers to invalidate direct access regions
if a change is made to the mapping. This is needed to prevent the Sega
dynamic memory mapping chips from falling over.
H8:
- Added support for 8-bit H8 family MCUs, starting with the H8/3344
- Pointer-ified all H8 cores
- Some cleanup and renames toward additional future work
System 23:
- Added extremely preliminary support for I/O boards with the H8/3344
- Added new game: Motocross Go! (MG3 Ver. A) [credit Guru]
Removed opbase globals to the address_space structure.
Cleaned up names of pointers (decrypted and raw versus rom and ram).
Added inline functions to read/write data via any address space.
Added macros for existing functions to point them to the new functions.
Other related cleanups.
(SMPC irq bit/introdon irq register hack/pblbeach framebuffer hack plus some more)
(Note: some games have issues with it,but they'll be hopefully fixed on the next couple of updates)
into the core proper and removed unused macros. Changed all
external interfaces to pass the CPU device. Enabled 64-bit
operations by default. Re-derived the interface functions to
cascade and share code more aggressively.
These changes also seem to have cured the taito_f3 issues as
far as I can tell (at least pbobble3 seems right now).
state_save_combine_module_and_tag() function in favor of passing
the tag when registering. Revisited all save state item registrations
and changed them to use the tag where appropriate.
This patch implements a "plug-in board" device for the Naomi.
It represents the rom boards for the various games and the dimm board for the gdrom.
Now the dimm board part contains only a routine to load the "rom file" from the gdrom chd, but in the future it will be fully implemented with its own sh4 processor, security chip and so on.
Extracted .rom files are no longer needed, rom file is extracted in code from the CHD.
(needs a little cleanup as it was based on pre-aaron 'change everything' code, but it's functional)
(yes I did a quick test,current implementation makes (for example) human skin colors memory address to be equal to the palaces colors memory address in the intro)
* Fixed Final Arch broken Test Mode;
* Demoted Super Major League / Final Arch as GAME_NOT_WORKING,they hangs randomly due of SH-2 master/slave communication RAM issues;
* Removed GAME_NOT_WORKING flag to Fighting Dragoon Legend Elan Doree,because protection affects only in-game graphics and not gameplay;
new clones added
-----------------
Violent Storm (ver UAC) [Bill DeLeo]
(this is newer than the existing USA set, the night slashers he dumped turned out to be the same as an existing set)
---------
Puzzle Bobble 2 (Ver 2.3O 1995/07/31) [Ross Myers]
---- note
At the moment the Taito F3 driver is pretty broken, it has been since the 68000 core changes in the last u update.
For this clone to boot I've had to add a patch, it's checking something, can somebody find out what? Seems odd.
I've also removed all speedups in the driver, the 68020 games are fast enough on modern hardware that the speedups aren't really worthwhile.
are broken.
Changed READ/WRITE handlers to accept an address_space * instead of a
machine *. The address_space object was enhanced to contain a machine
and a pointer to the relevant CPU object.
Fixed a number of errors found by the compiler, mostly in the core and
CPU/sound handlers, but there is a lot remaining to fix.
Added new function cpu_get_address_space() to fetch the address space
for calling in manually to these functions. In some instances, code
which should eventually be converted to a device is hard-coding fetching
the program space of CPU #0 in order to have something valid to pass.
* Better management of hblank/vblank bits;
* Makes dynamic resolutions to be called with a timer instead of run-time;
* Makes dynamic resolutions to not be changed at every frame but only when there's an actual change;
This fixes Golden Axe: the Duel gameplay speed at the cost of breaking up Groove on Fight coin counter at start-up.
----------
Beast Busters (US, Version 2) [Brian Hargrove]
(he hasn't confirmed if he's OK being credited with his real name yet, so if the situation changes I'll mail the list)
I've also DEMOTED Beast Busters to non-working. As soon as you calibrate the guns the game fails, and without calibrated guns you can't really play. The gun reading is hacked, as are the gun interrupts. This needs fixing *properly*, at which poin I imagine it will actually work, and no just hang after calibration. From what I can tell it's never worked after calibration hence the demotion.
original dump was fine, there just needed to be a gap in the rom loading.. there are still some 'nasty' sounds, but this seems typical of our ymz280b emulation, I'm still pretty sure the ADPCM decode is broken, it must be 'special'.
I've also promoted them to playable.. so
New Playable Games
------------------
Jackie Chan - The Kung-Fu Master [David Haywood, Andreas Naive, stephh, Angelo Salese]
Jackie Chan in Fists of Fire [David Haywood, Andreas Naive, stephh, Angelo Salese]
this documents the CPS2 Phoenix sets, and what happens to a dead CPS2 board.
I think it's important we start keeping track of these now as they're finding their way onto bootleg boards, with further hacks and modifications made along the way.
Far from an ideal situation, but, our job is to document the facts, not discriminate by ignoring them.
- removed unnecessary deprecat.h includes
- replaces Machine with existing running_machine* instances
- re-adds a peroid I accidentally removed when changed a message to
use defines
- adds a running_machine* to win_window_info and debugwin_info to get
rid of most Machine occurances and clean up the running_machine*
parameters I added in the past
[Oliver Stoeneberg]
With Aaron's change to macroize the cpu apis, the cpu/sound interfaces
are now using different idioms. This patch fixes that. It uses the
prefix SND_ instead of SOUND_, to avoid changing SOUND_START,
SOUND_RESET in driver.h. While working on it, I noticed that the
reset routines for k053260, msm5205, upd7759 and vlm5030 aren't hooked
up, but I decided this was an oversight and macroized the functions
anyways (but left them unhooked).
related APIs now take a device pointer instead of an index.
All functions that take a CPU device are prefixed with cpu_*
All functions that are globally related to cpu execution
are prefixed with cpuexec_*. Below is a list of some of the
mappings:
cpu_boost_interleave -> cpuexec_boost_interleave
cpunum_suspend -> cpu_suspend
cpunum_resume -> cpu_resume
cpunum_is_suspended -> cpu_is_suspended
cpunum_get_clock -> cpu_get_clock
cpunum_set_clock -> cpu_set_clock
cpunum_get_clockscale -> cpu_get_clockscale
cpunum_set_clockscale -> cpu_set_clockscale
cpunum_get_localtime -> cpu_get_local_time
cpunum_gettotalcycles -> cpu_get_total_cycles
activecpu_eat_cycles -> cpu_eat_cycles
activecpu_adjust_icount -> cpu_adjust_icount
cpu_trigger -> cpuexec_trigger
cpu_triggertime -> cpuexec_triggertime
cpunum_set_input_line -> cpu_set_input_line
cpunum_set_irq_callback -> cpu_set_irq_callback
In addition, a number of functions retain the same name but
now require a specific CPU parameter to be passed in:
cpu_yield
cpu_spin
cpu_spinuntil_time
cpu_spinuntil_int
cpu_spinuntil_trigger
cpu_triggerint
Merged cpuint.c into cpuexec.c. One side-effect of this
change is that driver reset callbacks are called AFTER the
CPUs and devices are reset. This means that if you make
changes to the CPU state and expect the reset vectors to
recognize the changes in your reset routine, you will need
to manually reset the CPU after making the change (since it
has already been reset).
Added a number of inline helper functions to cpuintrf.h for
managing addresses
Removed cpu_gettotalcpu(). This information is rarely needed
outside of the core and can be obtained by looking at the
machine->cpu[] array.
Changed CPU interrupt acknowledge callbacks to pass a CPU
device instead of machine/cpunum pair.
Changed VBLANK and periodic timer callbacks to pass a CPU
device instead of machine/cpunum pair.
Renamed all information getters from cpu_* to cpu_get_* and
from cputype_* to cputype_get_*.
Added Simulation of Toybox external data rom decryption from Andreas
Converted Blood Warrior, Bonk's Adventure, Great 1000 Miles Rally 1+2 to use the new code.
Updated suprnova rendering to allow 2 sprite chips.
Started work on Jackie Chan & Gals Panic 3
* sndindex now considered as well in state save
* expose discrete_sound_n_r(void *chip, ...) to enable accessing multiple discrete sound cores
Curt Coder, is this sufficient?
* changed the 6845 type to R6545_1 (Rockwell as mentioned in the driver).
* use transparent addressing
* lightpen code now generates a "lightpen_assert" at the right screen position.
* Completely hooked up 6545 without wrappers.
* implemented support for phi1/phi2 transparent addressing
* added callback to communicate address back to driver
Implementation is not and can not be "clock" accurate since the timing is totally up to the hardware implementation. It is the main cpu and hardware which determines phi clocking and when data is written to video ram. The only support in the 6545 is that the update address is latched out to the ma lines during phi2.
(program roms are identical to Vs. Super Mario Bros. (alt),just the graphical roms are completely reworked,I don't know if it is worth supporting...)
(PS: do not credit me on this)
context ones (which are going away), the disassembler (which should
have no dependencies on the live CPU), and the validity check.
Removed global token from all pointer-ified CPU cores that don't
have internal read/write callbacks (which still need to reference it).
* added a set of cpu_* calls which accept a CPU device object;
these are now the preferred means of manipulating a CPU
* removed the cpunum_* calls; added an array of cpu[] to the
running_machine object; converted all existing cpunum_* calls
to cpu_* calls, pulling the CPU device object from the new
array in the running_machine
* removed the activecpu_* calls; added an activecpu member to
the running_machine object; converted all existing activecpu_*
calls to cpu_* calls, pulling the active CPU device object
from the running_machine
* changed cpuintrf_push_context() to cpu_push_context(), taking
a CPU object pointer; changed cpuintrf_pop_context() to
cpu_pop_context(); eventually these will go away
* many other similar changes moving toward a model where all CPU
references are done by the CPU object and not by index
* cpu/i8x41 should be renamed to UPI-4x, since UPI-41/42 was an intel chip family
postponed for now until core moved to pointers.
* removed I8041 definition from mcs48
* removed I8x41 cpu definition and config struct
* added I8041, I8741, I8042, I8242 and I8742 cpus to i8x41.c
* added internal memory maps
* internal ram now uses DATA memory space
* updated drivers
* increased interleave to 70 in decocass. This fixes decocass hanging in countdown around 13
No idea when this bug was introduced.
Sent: Friday, November 07, 2008 9:47 PM
To: submit@mamedev.org
Cc: atariace@hotmail.com
Subject: [patch] More header files for mame
Hi mamedev,
Here's another set of about 20 new include files for MAME. As before,
the only issues discovered by the migration were some dead prototypes.
~aa
