* hp85: added support for optional ROM cartridges. Started optional ROM
sw list (not finished).
* hp85: refactored mapping of opt. ROMs according to cuavas' comments
* initial skelethon: ControlID X628 fingerprint reader
* first draft of an implementation of the NT7534 device (LCD controller)
* fix emulation of ControlID x628 + NT7534 LCD controller
* cidx628: fix LCD color palette on Control ID x628 driver
* Adding a header with details of the hardware. This is the first MAME driver with an LCD controlled by a NT7534 chip, so I wrote an initial implementation of that new device.
These humble 16-pin logic devices were commonly used in 8-bit arcade games to control coin counters/lockouts, IRQ flipflops, graphics banking, slave CPU reset lines, discrete audio triggers, screen flipping, serial EEPROMs and much else. Over 100 drivers and a few bus devices have been updated to use the new implementation, and a great deal of research has gone into documenting the physical location of these devices on actual PCBs in the source. Write handlers have been provided for both orthodox and somewhat less conventional memory mappings.
Incidental to this update, coin counters and/or lockouts have been added to Atari System 1 games, Basketball, Gauntlet, Gyruss, Hana Yayoi, Hole Land, Jr. Pac-Man, Mahjong Sisters, Pooyan, Roc'n Rope, Squash, Thunder Hoop, Time Limit, Time Pilot '84 and many others. This also cleans up coin counter behavior in Sauro and Rally Bike.
(nw) The purpose of committing this change, which has been several months in the making, early in the 0.189GIT cycle will be to allow time for fixing potential regressions; I've fixed a number of drivers that lost sound from this for various reasons (hnayayoi.cpp having missing or garbage ADPCM was particularly painful, since the three games in that driver all work slightly differently), but I can't test all affected drivers exhaustively. @Tafoid, don't bother running automated screen capture comparison tests on this, as many drivers are now expected to have the screen flipped for the first few seconds after reset.
* Fix save/load states in Emscripten build
* Simplified Emscripten integration points
* Moved standalone JS functions to be static member functions of running_machine
* Improved Emscripten main loop
* Use convenience functions for cleaner code
As an added bonus, this now allows for proper shutdown of the running machine when running in the Emscripten environment - previously, attempts to exit the program were just being ignored.
What works:
* HP85A machine with 16K of RAM
* Capricorn CPU works
* Keyboard works (with minor issues)
* CRT text / graphics modes work (correct speed is not emulated yet so service ROM complaints)
* BASIC is usable
What is missing (and I'll have hopefully working soon):
* HW timers
* Beeper
* Integral printer
* DC100 cassette drive
* Extension ROMs
* I/O modules (especially the HPIB interface so that we can hook up floppy drives)
* Other models in the family (e.g. HP86)
create a uPD78C11 derived CPU type for this purpose, with internal ROM map
use internal ROM map for other uPD78C10 chips as it's always present.
add missing NO_DUMP definitions to various games using C-Chips with correct size etc.
pump megablast through the device code as really all it ever does is bank the c-chip window and test the RAM.
* Implemented front panel mode switches/LEDs and reset switch
* Added skeleton bus for "universal" slots and connected control lines
(nw) Default keyboard mapping is annoying because left shift, Z and X
are used both for typing into the TTY and switching program bank. You're
better off changing the mapping to make it less annoying or using a
socket and talking to it with telnet.
* Renamed to MCS-40.
* Emulated 8-clock instruction cycle, interruptible at any point.
* Converted TEST input to an input line.
* Added SYNC and CM output lines.
* Added support for 4040 CY output, logical operations, extended registers, ROM banking and disassembly.
* Made I/O space mapping more flexible to support the variety of peripherals available.
* Notable missing features are 4040 interrupt and halt, and "program memory" space.
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
* WIP, transitioned 'entry_char' to std::string
Still need to address Joystick and FR keyboard concerns
* Reimplemented state save support with joystick buttons
* Changed the state menu to be "code driven" rather than "character driven"
When the menu is displayed, it will look at the filenames, and translate them to a visual representation as per the user's locale
* Vas feedback
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
sound board, completing the tromba circuit
(nw) I'm not sure whether the model works properly or not, but in the
circuit where it's used, I don't think it can work properly with the
current TTL output model. A capacitor is charged by the Q output of a
74LS74 flipflop (U3A) until the voltage passes the Schmitt trigger's
threshold, causing it to reset the flipflop. However, the positive
trigger voltage of the Schmitt trigger is 1.6V, but our TTL output model
has a high output voltage of 1.0V (see nl_base.cpp:89). I realise the
simplified model of TTL logic with high impedance inputs and outputs
behaving as though thery're loaded is convenient and fast to simulate,
but it's not detailed enough for applications like this where
7400-series chips are used in analog circuitry. This is what held me up
last time I tried adding a netlist for this sound board.
- OPENMP refactored. All OPENMP operations are now templatized in pomp.h
- We don't need thread-safe priority queue. Event code updating analog
outputs now runs outside the parallel code.
(nw)
* move rarely-used output and pty interfaces out of emu.h
* consolidate and de-duplicate forward declarations, also remove some obsolete ones
* clean up more #include guard macros
* scope down a few more things
(nw) Everyone, please keep forward declarations for src/emu in src/emu/emufwd.h -
this will make it far easier to keep them in sync with declarations than having
them scattered through all the other files.
The core changes are:
* Short name, full name and source file are no longer members of device_t, they are part of the device type
* MACHINE_COFIG_START no longer needs a driver class
* MACHINE_CONFIG_DERIVED_CLASS is no longer necessary
* Specify the state class you want in the GAME/COMP/CONS line
* The compiler will work out the base class where the driver init member is declared
* There is one static device type object per driver rather than one per machine configuration
Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type.
* DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders.
* DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type.
Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types.
* These macros declare storage for the static data, and instantiate the device type and device finder templates.
The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate.
Things I've actually messed with substantially:
* More descriptive names for a lot of devices
* Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes
* Changed DECO BSMT2000 ready callback into a device delegate
* Untangled Microprose 3D noise from driver state
* Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices
* Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly
* Started to break out common parts of Samsung ARM SoC devices
* Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++
* Tried to make Z180 table allocation/setup a bit safer
* Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant
* Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size
* Imporved encapsulation of Z80DART channels
* Refactored the SPC7110 bit table generator loop to make it more readable
* Added wrappers for SNES PPU operations so members can be made protected
* Factored out some boilerplate for YM chips with PSG
* toaplan2 gfx
* stic/intv resolution
* Video System video
* Out Run/Y-board sprite alignment
* GIC video hookup
* Amstrad CPC ROM box members
* IQ151 ROM cart region
* MSX cart IRQ callback resolution time
* SMS passthrough control devices starting subslots
I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo).
And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros.
It feels like an uphill battle trying to get this stuff under control while more of it's added.
- Create device_palette_interface, which takes over most functionality from palette_device except for the initialization/decoding routines and RAM interface.
- Update screen_device and device_gfx_interface to use a device_palette_interface object rather than a palette_device. This necessitates slight alterations to a few drivers and devices.
- Modify v9938 and v9958 to use the new device_palette_interface rather than a subdevice. This entails breaking a cyclic dependency between device_video_interface and screen_device for this case.
nes: Fix debug output when reading iNES headers. (nw)
nes/ppu2c0x: Improved PAL clone timings. (nw)
nes/n2a03: Refactored clock definitions [includes other drivers using the
N2A03] (nw)
nes: Improved refresh rates and timings to reflect nesdev (nw)
nes: Softlist improvements and corrections [koko, mkgoogoo and others] (nw)
nes: Verified koko in the softlist as a good dump (nw)
nes: Softlist additions [subor5, subor6, subor10, subor11, subor13, doolybld]
(nw)
New not working machines added: Subor SB-486, M82 Display Unit (PAL) (nw)
nes: Marked drpcjr as NOT WORKING due to missing hardware. (nw)
New working machines added: Micro Genius IQ-501, Micro Genius IQ-502, Dendy Classic 2 (nw)
nes: marked dendy as a clone of iq501 (nw)
* tee allows two peripherals to be connected in parallel
* glinkhle is an RS232 (9600 8N1) adaptor
* bitsock sends raw assert/release line signals to/from a bitbanger device
* monospkr is a speaker connected between tip/ring in parallel and sleeve
* stereospkr is two speakers: left across tip and sleeve, right across ring and sleeve
Use glinkhle to make emulated calculators talk with cooked sockets, e.g.
mame ti82 -linkport glinkhle -linkport:glinkhle:rs232 null_modem -bitb socket.127.0.0.1:2345
Use bitsock to make emulated calculators talk with cooked sockets, e.g.
mame ti82 -linkport bitsock -bitb socket.127.0.0.1:2345
You can use tee to do stuff like listen to data activity for debugging purposes, e.g.
mame ti82 -linkport tee -linkport:tee:a stereospkr -linkport:tee:b glinkhle -linkport:tee:b:glinkhle:rs232 null_modem -bitb socket.127.0.0.1:2345
* Make device_creator a variable template and get rid of the ampersands
* Remove screen.h and speaker.h from emu.h and add where necessary
* Centralise instantiations of screen and speaker finder templates
* Add/standardise #include guards in many hearers
* Remove many redundant #includes
* Order #includesr to help catch headers that can't be #included alone
(nw) This changes #include order to be prefix, unit header if applicable
then other stuff roughly in order from most dependent to least dependent
library. This helps catch headers that don't #include things that they
use.
- Moved 9312 and 74279 to ttl macro library.
- Renamed TTL_9312_* to DM9312. This is more appropriate.
- Fixed a number of warnings from latest ubuntu clang-5.0.
* Use size_t for sizes and <algorithm> for algorithms
* Fix up some files that were getting linked into multiple libs
* Add missing virtual method to sh2 peripheral class
* Put shortname in driver struct for locality
* Use shared pointers in config LRU cache for safety
Per Vas' request. If the compile fails for you (i'm thinking osx and
windows native debuggers here in particular), add '#include "emu.h"'
as first include of the cpp files that fail.
Due to our use of precompilation and forced inclusion, emu.h must be
included as the very first non-comment thing we do if we want to be
sure msvc compiles are identical to gcc/clang ones. Doing it directly
instead of through an include increases the correctness probability by
a magnitude.
- Created devices for the galaxy games carts (EEPROM + Flash + PIC) and the slot(s)
- Removed code patches and emulated the PIC communication and bank switching
- Converted the blitter to a device (cesblit.cpp)
- moved the Galaxy Games from tmaster.cpp to their own driver (galgames.cpp)
Provided the PIC code for all four StarPak cartridges [Keith M. Kolmos]
New working machines
--------------------
Galaxy Games StarPak 3
[Keith M. Kolmos, Rod_Wod, Sean Sutton, Soren Skou Nielsen, Russell Howard, Francis Ramirez,
Tourniquet, BrianT, coolmod, Smitdogg, The Dumping Union, Luca Elia]
* Put Amiga keyboard implementations in a namespace
* Factor out matrix keys to a common module shared by A500/A1200
* Make new German matrix based on US matrix with Alt-chars hooked up
* Remove outdated comment
* Added m146805 and m68hc05 to unidasm
* Made opcode tables configurable in m6805_base_device, provided tables for HMOS, CMOS and HC families
* Implemented MUL instruction, made unimplemented STOP and WAIT raise fatal error
* Added skeleton MC68HC05C4 with RAM and ROM in correct locations in memory map
Device implementations (all cpp files in netlist/devices) now should
only include nl_base.h.
Netlist implementation sources should only include "net_lib.h".
Refactored netlist.h and netlist.cpp to avoid namespace congestion in
netlist.h.
Fixed VC2015 build. (nw)
* should be #included after other headers and after optionally #defining VERBOSE
* usage samples in z80scc.cpp and m68705.cpp
68705: add lots of logging to help trace issues
- refactored reverse polish notation evaluator into own source files.
- added function parameter to current and voltage sources VS and CS.
You can now use those to e.g. produce a sine wave.
- Changed code to allow devices to optionally be treated as dynamic or
timestepping devices.
[Couriersud]
* Moved 68705 devices into their own file.
* Made P3, P5 and U3 variants and made them load bootstrap ROMs.
* Implemented EPROM control (write is stubbed out with a logerror).
* Implemented differences for open drain I/O ports.
(nw) Base device with peripherals should really derive from the 6805
device directly, not the 68705 devices, as I/O ports are present on mask
devices (e.g. 6805P2). All drivers and devices that were using
M68705_NEW have been changed to M68705P5 - someone who knows the drivers
better should fix them up.
into these files as well. The code uses <cfenv> which is part of c++11
standard. Non-standard glib extensions are currently only used on linux
and (i386 or x86_64). (nw)
in the mizar lib. This is suboptimal, but the code seems to
crossreference across object files and from the bus code into the driver
code.
At least the source now links again. (nw)
- Allow stringing multiple callbacks together recursively. Chained callbacks will be read or written in sequence, and each can be configured with its own type and mask/shift/XOR parameters.
- Chained input callbacks cannot have overlapping masks (there's no such thing as a free multiplex). Chained output callbacks have no such restriction.
- Remove the constant parameter for the LOGGER callback type: it makes no sense for output, was always zero in existing usage, and is now unnecessary with callback chaining.
- Change LOGGER behavior for writes to log the user-defined message only if the output as masked is nonzero. With callback chaining, this can be used to monitor when individual bits become active.
- Constant read callbacks can no longer have MCFG_DEVCB_XOR or MCFG_DEVCB_INVERT specified (makes no sense in this context).
- Add a MEMBANK callback type to allow output bits to be used for bank-switching.
- Add ASSERTLINE and CLEARLINE callback types that raise or lower an interrupt line if the selected bit of the written value is active. These are intended for where periodic or ready-pulse signals from devices are used to trigger IRQs that the CPU program will independently acknowledge.
- Add MCFG_DEVCB_BIT as shorthand for masking and shifting out an individual bit for a callback.
- Removed DEVCB_LINE_DISPATCH_<n>. Where we're going, we don't need line dispatcher devices.
The incompatibility of compilers with regard to post-C90 printf string formats is shockingly bad. There seems to be no easy way to format a 64-bit value and please both gcc and clang, let alone MSVC.
-netlist: Added new devices: [Ryan Holtz]
* Intel 2102A 1Kbit (1024 x 1) Static RAM
* 74365 Hex Bus Driver with 3-State Outputs
* Generic 2- and 3-terminal Tristate device
* Note: Tristate device and 74365 do not actually tristate, they are simply a way of combining multiple outputs + chip enables.
selmenu: use LRU cache so icons don't all need to be reloaded on scroll
uismall.bdf: set default character for missing glyphs
rendfont.cpp:
* encapsulate many BDF and BDC handling details
* make file I/O 64-bit clean, check for allocation errors
* more solid BDF parser with error messages and trace logging
* fix heap smash when building bitmaps for BDF fonts
* extend BDC format to support high planes and default character
* render default character if glyph not found for BDF/BDC
- Uses the standard 6840 PTM core for sound generation
- New MM583 Noise Generator device
- New DAC-76 DAC sound
- Use resistor network values for colors
- Use bankdev device for banking
Use standard uint64_t, uint32_t, uint16_t or uint8_t instead of UINT64, UINT32, UINT16 or UINT8
also use standard int64_t, int32_t, int16_t or int8_t instead of INT64, INT32, INT16 or INT8
ataxx: Fixed missing sound channel caused by one dac not being hooked up and one dac being hooked up to two addresses.
bestbest: Fixed high pitch screech caused by incorrect addressing (two dacs weren't hooked up and two were hooked up to two addresses).
cchasm: Fixed static noise generation caused by feeding the same bit to both dacs.
cheekyms: Slightly improved sound by implementing sound triggers as 8 x 1 bit dacs instead of 1 x 8 bit dac.
galeb: Fixed sound by implementing it according to http://www.deltasoft.com.hr/retro/galebemu.htm & implemented enough of LOAD/SAVE to stop it hanging.
hard drivin: (all games in driver) Improved 12 bit controls, although centre still goes out of sync.
mea8000: Converted to a sound device.
megaphx: Fixed noisy samples due to wrong format.
microvsn: Fixed sound pitch caused by incorrect usage of write_signed8().
seicross: Changed to a 4 bit dac as samples are packed nibble.
spaceg: Preliminary sound using space invaders samples.
suna8: Changed to a 4 bit dac as samples are packed nibble.
vcombat: Fixed static during machine gun fire due to incorrect dc offset removal.
vectrex: Fixed noisy samples due to wrong format.
wheelfir: Fixed sound, eeprom & analogue steering wheel and brake pedal.
Turbosub had a ROM_COPY declaration with an expression ('ROM_COPY( "main_code", 0x18000 + 0x2000,...) and this simply did not work with the new model. This required changing ROM_* declarations to more resemble how they used to be and to perform the conversion on load.
This is a redo of the split first submitted in #137, with the following differences:
* The newly refactored rom_entry data structure is used
* I've kept the refactored softlist code in src/emu, in order to defer the mechanical process of moving it
* I've kept includes of softlist[_dev].h out of diimage.h, so that changes to either do not trigger an emu.h recompilation
* Obviously, this goes against the latest master
* Mark lots of things constexpr in attotime and turn macros into functions
* Add base classes for HLE matrix keyboard and buffered RS232 device
* Make generic keyboard/terminal more usable
* Keyboard has configurable typematic delay/rate
* Keyboard has selectable JIS/ANSI layout
* Keyboard handles simultaneous keypresses more intuitively
* Keyboard uses meta to set high bit
* Terminal has configurable auto LF on CR, auto CR on LF and local echo
* Terminal has audible bell
* Untangle Olivetti M20 keyboard from generic_keyboard
* Add notes to Olivetti M20 keyboard emulation
* Make Olivetti M20 keyboard match physical layout
* Untangle RM Nimbus keyboard from generic_keyboard
* Fix natural keyboard mode with RM Nimbus
* Untangle x68k keyboard from generic_keyboard
* Improve x68k key names and mapping
* Improve x68k typematic behaviour
* Untangle QX-10 keyboard from generic_keyboard
* Keep NGEN keyboard barely working
The keyboard should communicate at 1,200 Baud, but due to bugs in the SCC
it's set to 9,600 Baud. The sun4c machines program the Baud rate
generator dividers for the serial ports with 00:0e and the dividers for
the keyboard/mouse ports with 00:7e. Therefore the ratio of Baud rates
should be (0x7e + 2) / (0x0e + 2) = 128 / 16 = 8. However both the RS232
ports and the keyboard/mouse ports run at 9,600 Baud, when the
keyboard/mouse ports should run at 1,200 Baud (which is 1/8 of 9,600 which
matches the ratio of the divider values).
I've artificially limited the rate the keyboard can transmit at to be no
faster than it could at 1,200 Baud using a timer. I can remove this hack
once we get correct SCC divider behaviour.
I attempted to hook up the SCC interrupts to level 12 as specified in the
SPARCstation-1 Programmer's Model in the table on Page 19. No interrupts
seem to be generated, so either I've screwed this up somehow, the Sun
isn't enabling interrupts, or there's another bug in the SCC emulation.
Sorry if I've screwed it up - I won't be offended if someone replaces it
wholesale.
The keyboard receives the reset commands from the Sun and sends back the
self test pass response, but the SCC seems to get a buffer overrun error.
So it appears that the received data isn't being read out. I haven't been
able to work out why.
* .h -> .ipp for things that aren't really headers
* make more stuff in selmenu private
* move the remembered driver/software associated with the snap to the cache object
* start cleaning up constness in datfile manager - it's still a mess of non-const statics
* Split out main menu and dat box drawing from base class
* Make a bunch of class statics proper per-machine persistent objects
* Object lifecycle fixes
- Create a SG-1000 expansion slot.
- Hook up the SG-1000 expansion slot to sg1000.cpp and sms.cpp (sg1000m3).
- Split the sk1100 code from sg1000.cpp and attach it to the new expansion slot.
- Create a new FM Sound Unit device and attach it to the new expansion slot.
- For the sc3000 driver, re-add sk1100 as a fixed SG-1000 expansion device.
- Add sg1000 software list to sg1000m3 and Japanese/Korean SMS drivers.
sms.cpp: implemented some new findings [Enik Land]
- Remove some mirrors for ports $DC/$DD on SMSJ based on Charles' hw tests.
- Add basic C-Sync callback to 315_5124.cpp, based on Charles' hw tests.
- Add built-in Rapid Fire (uses C-Sync) for SMSJ and Korean SMS1 drivers.
- Add new SMS drivers due to XTAL differences:
sms1br - Tec Toy Master System I (Brazil)
sms2br - Tec Toy Master System II (Brazil)
smsbr - Tec Toy Master System III Compact (Brazil)
sms1paln - Tec Toy Master System I (PAL-N)
sms2paln - Tec Toy Master System II (PAL-N)
smspaln - Tec Toy Master System III Compact (PAL-N)
Brazil is PAL-M TV system, but I decided to call it by the
country name, seems to be better recognizable and for
emulation looks more like a NTSC system. PAL-N is used
in Argentina, Paraguay and Uruguay and looks closer to
the European PAL system when compared to PAL-M.
- Replaced shared_ptr by unique_ptr.
- Better seperation of setup_t and netlist_t.
- Fixed bugs in rdtsc code. Refactored timer code.
- Simplify conditional activation/deactivation.
- Introduced HINT(device, hint) to clarify that hints are inheritent
and not specific to devices.
- Added improved profiling support to netlist. Statistics output now
proposes devices for which whole device activation/deactivation be
disabled. No significant improvement for pong, but breakout
experiences a 10% improvement.
- Moved options code from include to cpp file.
- Minor modifications to 7493 and 9316
- Introduced perftime_t and perfcount_t for gathering statistics. These
templates do not create any code if statistics are not kept.
- Make help2man ./nltool produce usuable output.
- More truthtable refactoring. Removed half-finished code for internal
state support. As implemented, this would have had no support for
timing delays.
[Couriersud]
Three patches with code cleanups to the OSD layer [
Giuseppe Gorgoglione]
* Fix debugging code in font_dwrite.cpp
* Introduce dynamic_module
* Remove Direct3D abstraction layer
* git version is set by top-level make, not just when GENie runs
* can set IGNORE_GIT=1 for make to ignore git
* git ignored/unavailable uses "unknown" in version string
* mark modified trees as dirty
* note that version now comes from makefile
- Dead code removal and minor refactoring.
- Simplify. Align naming with stl. Fix somed pedantic warnings.
- More STL compatability.
- Remove ATTR_HOT and ATTR_COLD. Refactored netlist_time.
- Fix long standing workaround which would ignore policy of change-only"
propagation.
- Rewrote for loops to use auto : semantics.
- Truthtable cleanup. (nw)
- Get rid of nl_math. Remove nl_util.h and moved contents to
plib/putil.h.
- Fix standalone build. Refactor ptypes.h.
[Couriersud]
allow in-place creation (for increased locality) of netlist classes.
Main use is in truthtable class.
- Remove PLIB_NAMESPACE macros.
- Remove namespace macros. Use explicit namespace declarations.
- Moved device definitions into cpp files.
- Moved more device definitions into cpp files.
- New prefix "nlid" for include files flags purely internal include
files not to be leaked into userland.
- Fix factory code.
* pet_cass.xml
- Added Supermon (Toronto PET User Group) [Ken White]
- Replaced bad dump of Side B of Squiggle, Big Time / Monitor (the m command in the monitor now works correctly) [Ken White]
- Separate watchdog implementation from running_machine (once again) and driver_device
- Old-style methods, now hidden behind #ifdefs, will probably be safe to remove soon
exploit slot devices: [Fabio Priuli]
- moved cart-specific components to the carts itself removing
the fake protection devices from the main system, since they
never belonged there
- removed hacky rom region destruction/construction when a
new cart is inserted, replacing it with proper bank pointers to
the carts (except for ymsnd and ymsnd.deltat region which
will require modernization of the ym devices)
- started re-organization of bootleg boards emulation, so to
reduce the need of collapsing everything into a single cart
type with multiple protection devices, more work is needed
neopcb.cpp: moved to a separate source file the emulation for
JAMMA PCB versions of a few neogeo games, since they don't
have a cartslot. [Fabio Priuli]
neogeo.xml: added information about Japanese titles and
release dates to the software list and aligned the list to the
driver. [Fabio Priuli]
cleaning up the related code. [Fabio Priuli]
saturn.cpp: added emulation of the SegaTap adapter (4 controllers)
and Sega Multitap adapter (6 controllers). Saturn Bomberman
can now be played as intended. [Fabio Priuli]
through slot devices. If you want to launch janshin in the
multislot driver (neogeo) you shall now prescribe
-edge "" -ctrl1 mahjong
and set accordingly the dipswitch. The janshin driver already
comes pre-configured in the proper way, instead. [Fabio Priuli]
Some systems like Debian, Ubuntu and other derivatives, expect qtchooser
will be used to select the appropriate Qt version, as Qt5 and Qt4 can
co-exist.
As MAME's build system does calls to moc and qmake directly, and Qt5 is
now the required version for the debugger, pass -qt5 to all moc and qmake
calls to avoid the build fail.
you can now configure the controllers available in the multicart
driver (neogeo) with the -crtl1 and -ctrl2 options. when you run single
game drivers (e.g. mslug, or kof94, etc.), instead, a unique controller
is available and cannot be modified. [Fabio Priuli]
intvecs: Converted hand controllers, keyboard and synth to be slot devices,
by using a temporary hack to workaround the impossibility to plug the same
device into 2 different slots as these keyboard require. [Fabio Priuli]
out of whatsnew: in the long term we need to come up with a core solution
for these devices that occupy multiple slot devices at once (another one is
the VCS Compumate which plugs into both VCS control ports), because the
hack I used (a "fake" control port which acts as a passthru for the two real
control ports) is not really satisfactory. However, current solution is better
than the selectable controllers we had, which were (ab)using
PORT_CONDITIONs...
- removed inclusion of SDL headers in all headers.
- replaced those by forward declarations and in one case by a wrapper
class (for a typedef struct).
- added -Wno-strict-prototypes to 7z build (gmake target)
It's damn slow, ~50ms/frame on cdkong. Caching and/or hw accel will
solve that easily. It doesn't look very good, nanosvg need better
anti-aliasing. It also doesn't do texturing very well and images not
at all, so some of our current svgs won't look good. But all that's
fixable.
Extend USE_SYSTEM_LIB_* to support providing the library name and include directory.
To link against system specific lib names and header path: (ref #711)
USE_SYSTEM_LIB_LUA=lua5.3:/usr/include/lua5.3
- rename netlist_analog_t to analog_t
- straighten object model
- reduce access to member variables
- use pvector<analog_net_t::list_t> for groups.
- simple coverity fixes.
* Allow std::string to pass through core_file unmolested (reduces temporary allocations)
* Make zip/7z instances of same class with uniform interface
* zippath browsing is broken at the moment
This is another step towards transparent archive support. It's now
possible to access zip and 7z archives with the same code. Nothing is
taking advantage of it yet. There's now some very similar code in
fileio.cpp and clifront.cpp that could be folded at some point.
Make avi_file a class that's held with smart pointers, encapsulate various AVI I/O structures
Make zip_file and _7z_file classes rather than having free functions everywhere
Hide zip/7z class implementation behind an interface, no longer need to call close() to send back to the cache
Don't dump as much crap in global namespace
Add solaris PTY implementation
Improve variable expansion for SDL OSD - supports ~/$FOO/${BAR} syntax
Rearrange stuff so the same things are in file module for all OSDs
Move file stuff into its own module
7z/zip open and destruct are still not thread-safe due to lack of interlocks around cache access
Directory functions still need to be moved to file module
SDL OSD may not initialise WinSock on Windows
